Program of performances fixed on uninstall list after uninstalling

Similar Questions

• Remove entries of died in the WIN7 Uninstall list after a system restore

  Took to do a system restore. I had deleted some programs until I did the restore after the restore, these programs appear in the Install/Uninstall list, but they do not exist on the computer. I would like to remove the entries, but by clicking on uninstall does not work. I know there is a manual way to do it by editing the registry, but the info says that the process is for XP. I wonder if this will work as well for WIN7 or if there is a different way to do it.

  Hi Gnugs,

  You can try to remove these missing entries from program using Windows Installer Cleanup Utility and check.

  1. download and install the Windows Installer Cleanup Utility from the link below,

  http://support.Microsoft.com/kb/290301

  2. run Windows Installer Cleanup utility menu start, select the software you want to remove by using the Windows Installer Cleanup utility.

  3. After you have removed, restart your computer and check if these entries in the program are properly removed from your computer.

  In addition, you can use Disk Cleanup tool to remove temporary and unnecessary computer programs. Visit the link below for detailed information.

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup Delete files using disk cleanup

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to remove programe files that remain in the registry after I uninstalled these programs?

  How to remove programe files that remain in the registry after I uninstalled these programs?
  I uninstalled Nero 8 on my system (Windows Vista Edition home premium, 64-bit dell 1737 studio system); but several Nero files are always stuck in my registry. How can I remove them without destabilizing the system? Thank you.

  Yes, Nero is a software that I hate. I liked Nero until 6 version, I think, but after the Version 8 and 9, it was pathetic.

  2 years ago I had uninstalled a lot of software and there were many many registry entries obsolete - when a search I found that a member of a forum on the Web recommend CCleaner.

  Used from 2 years - each time without making registry backups. He never did wrong with my two PC - Windows XP SP3 and Windows 7 SP1 (previously Windows 7 RTM).

  The registry cleaner is fantastic.

  In which case you can try it, here's the download link.

  WARNING: Installation be sure to uncheck the installation of Google Chrome options.

  CCleaner automatically prompts you to create backups of registry before she cleans up the registry. The choice is totally yours.

• I tried fixing to uninstall Firefox reinstall that did not work. I always get the same error message: Firefox has stopped working. May need to change!

  I'm not the only one having this problem why Mozilla does not do something? I'm fed up about & may need to change to another browser! Firefox is the best browser I've ever had, but not more! Here I could go back to the old version - it worked great! The new version is when I started having this disorder.
  Time for Mozilla to step up & get that a difficulty or you will lose more than me I think! I disabled real arcade & most of the other modules. That did not help either.

  It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.org/KB/server+not+found
  • https://support.Mozilla.org/KB/firewalls
  • https://support.Mozilla.org/KB/fix-problems-connecting-websites-after-updating

• Cannot send photos "there are no associated program to perform the requested operation."

  original title: Windows live mail

  I configured my gmail account in my windows live mail client. yesterday, I tried to send e-mail from the same gmail account to a friend, mail is sent successfully. but they were not able to open the images. I tried to view the slide show on my computer, then I got the error message "requested action cannot be performed, there is no associated program to perform the requested operation" then I tried to download the same images again, I got the same message. I tried to change the extension of all formats of image (for example, .jpg and .jpeg) but still, I had the same problem of association. I tried to change the registry because I had the article on the microsoft Web site, also I did system restore and reinstalled WLM also. HELP PLZ

  Hello
   
  1 have. what article you tried?

  2 is the issue limited to Windows Live Mail?

  3 is the issue limited only with a specific file extension?

  Check out the following and check:

  Method 1:

  Step 1:

  Try opening the file in the Windows Photo Viewer and check if you are facing the issue.

  http://Windows.Microsoft.com/en-us/Windows7/view-and-use-your-pictures-in-Windows-Photo-Viewer

  Step 2:
   
  A default program is the program used by Windows when you open a particular type of file, such as a music file, an image, or a Web page. For example, if you have more than one web browser installed on your computer, you can choose one of them to be the default browser.

  This option allows to choose which programs you want Windows to use, by default.

  If a program does not appear in the list, you can make the default program using set Associations.

  1. open default programs by clicking the Start button, then programs by default .

  2. click associate a file type or Protocol with a program.
  3. click on the file type or protocol that you want the program to act as the default value.
  4. click on the program of change.
  5. click on the program that you want to use by default for the selected file type, or click the arrow next to other programs to show other programs. (If you don't see other programs or your program is not listed, click Browse to find the program that you want to use and then click Open
  6. click on OK.

  For more details follow the link below:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Method 2:
  Try to create a new user account and check if you have the same problem.
  To create a user account
  1. to open user accounts, click the Start button, click Control Panel, click user accounts and family safety, and then click user accounts .
  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. click on to create a new account.
  4. type the name you want to assign to the user account, click an account type, and then click on an account.

  For more information follow the link below:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If it works in the new user account, the user account may be corrupted.

  To fix the damaged user profile, you can check the link below:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  If you are facing problems with Windows Mail, I suggest you according to the query in the following forum.

  http://answers.Microsoft.com/en-us/windowslive

  Hope this information is useful.

• deleted programs manually always appear in the list, add/remove programs

  I have a large number of programs I uninstalled, but they still appear in Add/Remove program with the button Delete. Using the button Delete has nothing else that wasting time by telling me that he was unable to find the components. I went to the registry editor and manually delete all programs. I then checked the list Add/Remove programs and programs have disappeared. Then, I closed the registry editor and check the Add/Remove Programs list. The programs appear once more, this time without a button Delete. When I go back to the registry editor, the programs have disappeared. How to make them out of the Add/Remove Programs list?

  That all sounds pretty messed - too bad you took this approach.

  It is also a pity that forums MS Answers does not ask for any information system when a new question is asked, so we don't know anything about your system.

  Some people have good luck with the free version of Revo Uninstaller.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• is PC Cleaner Pro a good program for cleaning (fixing) my PC problems?

  PC Cleaner PRO from the East a good program of cleaning (fixing) my PC problems? An analysis by PC CLEANER PRO has detected problems 47 134.

  What problems do you have? You won't find many here who recommend a registry cleaner in good faith.

  Take a look at these links and then decide.

  http://aumha.NET/viewtopic.php?t=28099

  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

• ERROR. There is no associated messaging program to perform the requested action.

  There is no associated messaging program to perform the requested action. Please install an e-mail program or, if you already install create an association in the default program control panel

  Help, please

  My email

  E-mail address is removed from the privacy *.

  or

  E-mail address is removed from the privacy *.

  thancks...

  This is because you use Yahoo Webmail and not an e-mail client. You don't say what you're trying to do when you see this message, but maybe it's what you need.

  How can I make Yahoo! Mail my default email application?
  http://help.Yahoo.com/l/us/Yahoo/mail/YAHOOMAIL/settings/settings-10.html

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• The 2007 Microsoft Office programs do not appear in the list of default programs

  Hey there - I'll have a few courses of weird stuff.

  I have both OpenOffice.org and Microsoft Office 2007 is installed on my Windows 7 computer and I would like to use Microsoft Office as the default for all files, it can open, but he does not appear in the list of default programs.

  Indeed, with the exception of Microsoft Office Outlook, none of my Microsoft Office 2007 applications appear in the list of default programs!

  OpenOffice.org appears, and when I click on it in the list and click Choose defaults for this program of the defaults are already defined for the equivalent Microsoft Office application.  But there are some associations (such as text files) that are not correctly linked and possibly others that I don't know.  I would like to click Microsoft Word, and then click set this program as default so that it automatically opens all the files it can.

  I appreciate the help that you might be able to offer.

  -Nico of NYC

  Nico

  If you click on all programs above the Orb in the list you will find Microsoft Office 2007, click the folder and it opens to reveal Word, excel etc. You can right-click on the word etc. and choose PIN to the start menu or the taskbar somewhere else. I have pin and then in the start menu for convenience.

  Concerning

• error: there is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel

  Installed Windows7 Enterprise (evaluation) 32 bits have a database custom (32 bit) when I press the close button, an e-mail icon in the taskbar - nothing happens with the program except the screen turns off, when you press the email icon it is an error message - there is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel

  There is no email function associated with the close button

  using the close button of other windows in the work of database correctly.

  TBird is installed and works well

  Have solved the problem - the app was looking for a MAPI - outlook installed e-mail client and not more errors. Thank you much for the help

• There is no associated messaging program to perform the requested action

  When I right click on a file in the file Explorer and select send to > recipient of the message, I get a message box:

  There is no associated messaging program to perform the requested action. Install an e-mail program or, if such is already installed, create an association in the default programs control panel

  I did it by following the instructions with no result

  This problem may occur if the Outlook registry key is corrupted. When other programs try to use the Simple MAPI Outlook interface, they cannot retrieve the required information from the registry.

  You must first remove the corrupted Outlook registry key, and then perform an operation to detect and repair to ask Outlook to re-create the key. To do this, follow these steps:

  1. Click Startand then click run.
  2. In the Open box, type regedit and press ENTER.
  3. In the registry editor, locate the following subkey in the registry: HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
  4. Select the subkey and press DELETE.
  5. Click Yes.
  6. Exit the registry editor.
  7. Start Outlook.
  8. On the help menu, click Office Diagnostics.
  9. Follow the instructions on the screen to complete the repair.

• "Receive a prompt for there is no associated messaging program to perform the requested operation" when sending a ZIP file

  Original title: SENDING A ZIP file

  I am trying to send a ZIP file on a tech site I have the zipped and saved to my desktop log file. When I try to send it to the recipient of the email it says "there are no associated messaging program to perform the requested action. Install an e-mail program or if it is already create an association in the default programs in Control Panel. I went by default, type programs I went to associate a file or Protocol, and it is NOT one here for a zip file. I then tried to set your default programs that do NOT work. Then I tried to program or computer by default is nothing has worked. All I want to do is to send this FOLDER common ZIPPE with my logs to a place of software technology. Why is this so complicated? And what I'm doing wrong here?

  
  
  HP pavilion g6-2225nr
  Earn 8 X 64 V6.2.9 IE 10
  I use Gmail
  If you access Gmail via your browser, it won't work. The mailto prompt is looking for a default mail client.
   
  The easiest way is to simply start a new message and then attach the file. If you want to try to make Gmail default, that would work, but no guarantee.
   
  How to set your default e-mail to Gmail
  http://www.ehow.com/how_5151392_set-default-email-gmail.html

• His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, graphics driver re-installed

  no longer works because

  His flashes always (white, black) in illustrator > on my (surface pro3, Win10) and desktop (Win10) with creative illustrator of cloud. Can no longer use the program. / Driver WACOM have uninstalled, reinstalled illustrator, reinstalled video card driver

  I start the program and then it will begin to Flash white and black.

  On my machine of Tablet and desktop

  I use win10 on both

  need illustrator very soon

  It works again!

  I realized that I had installed a security plugin in order to access my bank account. It was the Warsaw by the GAS technology. I removed it and Illustrator came back to life! No more black and white flashing and slow down.

  I hope this helps! (:

• How do the default editing a selection list after a change in another list of selection is made (not in cascade LOV).

  Hello

  I searched for the answer for a while now, but could not find a solution to my problem. It's a rather trivial issue, but after dealing with more urgent problems, I stuck with it and I can't move forward I use Apex 4.2.1

  OK, lets start with a description.

  I have two selection lists. After making a choice in the first, I would like to than the second value to change. It is not cascade LOV case, however, at least I don't.

  Let me give you an example. Suppose we have a table with name and default to the occupation.

  Name	By default occupancy
  John	Doctor
  Mark	Firefighter
  George	Firefighter
  Tom	Concierge

  End user first selects the name in the first list, then the occupation of another. It's perhaps not clearly in the example given, but the order of the questions.

  What I want is to force a change in the second value in the list after a choice in the first. So after the name is chosen, the occupation should switch to the default.

  The assignment is the most typical, but not the only one. So I want the end user to be able to change the occupation if necessary. Tom of sense is not to be janiotor, it can be whoever he wants this is why it is not cascade LOV problem.

  I tried with dynamic action - definition of value and then refresh. It works when the second selection list is the text field. I can't find a way to make it work with another selection list.

  Hope you can help.

  Concerning

  AEMs salvation,

  What I wanted with display and return value, you usually have a list of selection like this query:

  SELECT occupation d, occp_id r

  OF professions

  If your return value is an identifier. To use the text as return value is rather rare. Where my question, because obviously you must select the return value in your query, NOT the display value.

  So let me explain what is a set value. It takes the value of the server by using your query and AJAX in the background, then uses Javascript to set the value of the item in the browser.

  At this point your selection list still has the OLD value in the session. Then, you do a refresh and the element uses the old value, and it seems that nothing happens.

  So solution:

  -clear default values, you don't need those

  -get rid of refresh it in your DA

  Kind regards

  Joni