Program to be submitted only one user at a time

Similar Questions

• Cannot cannot run .exe file, but only one user.

  I have 4 users put in place in Windows XP Media. Only one user has the problem that windows does not let him run the .exe files. get error asking what program I want to use to open this type of file. 3 other users do not have a problem. How do I fix this one

  Hello

  1. don't you make changes on the computer before the show?
  2. What is the exact error message?

  Method 1:
  Run the fix it and check.
  Diagnose and repair Windows files and folders problems automatically
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  Method 2:
  You can try the steps in the link and check if it helps:
  How to change or choose the program that starts when you double-click a file in Windows XP

  http://support.Microsoft.com/kb/307859

  Method 3:
  If the steps above fail then you can try the steps in knowledge base article and check.
  When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
  http://support.Microsoft.com/kb/950505#appliesTo

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• Explorer Windows has encountered a problem and needs to close, sorry for the inconvenience into account only one user. Other user accounts properly.

  This problem deals with only one of my user accounts, where the user accounts function correctly.  When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience."  No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.

  I did a system successfully restore to a previous point, but the problem remains.

  If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:

  "Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.

  I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).
  Source: http://www.computertooslow.com/windows-explorer-has-stopped-working.asp
  I hope this helps and good luck!
  ShadowKat. »
   
  If you're still having problems after this, I suggest that to start a new thread in the following location:
   
  http://answers.Microsoft.com/en-us/Windows/Forum/performance
   
  I hope this helps.

• Wired keyboard 600 can use only one button at a time

  Hi, I had problems with my laptop's built-in keyboard (keys type anything or type more letters), so I bought a wired keyboard 600 and it connected via USB. The keyboard has a major problem, however. He can't use that one key at a time - so, for example, I can't use shift and 1 to an exclamation point. If I try, nothing happens. I can type 1 or I can use the SHIFT key on my laptop keyboard and 1 on my USB keyboard (I had to type those hooks on the built-in keyboard). In addition, because I can't type a new character before the previously used key has been fully released, I am forced to type very slowly, one key at a time. Just to clarify, I can type at full speed on my laptop's built-in keyboard, it's just the multiple letters that are the problem here and I am sure it is a hardware failure.

  Can someone help with this strange problem? I am running Windows 7. Island OS is fully updated all drivers for my laptop. I have installed and reinstalled the keyboard drivers too.

  Thank you

  Hello Bangell,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your laptop?
  2. you made any hardware or software changes on your computer before the show?

  Thank you for details on the question and your efforts to resolve.

  This problem can occur because the parameters or corrupt device drivers.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://Support2.Microsoft.com/kb/258826

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Elements 9 organizing imports only one folder at a time

  Well, I bought Elements 9 after is is not happy with the products included with my camera.

  The system is a processor i950, Windows 7 Ultimate 64 bit, 12 GB of RAM, 120 GB SSD and a 1 TB hard drive.  Basically a system that gives me no problem with any other software, most of the time, free crash.

  I have a server that is running on a gigabit network.

  Pictures folder has about 25000 photos.

  My biggest problem from the beginning has been importing my photos.

  I would like to do an import on the drive mapped to the Photos, and not all would be imported when I checked again later.

  Then the questions increased when I actually try to import several files at a time.  All that would happen would be that the first content of files would be imported, but the second folder might get ignored.

  If I pointed out 10 files, only the first would incorporate.

  Great great pain in the behind when you have things organized properly.

  Also, I must say that the part of the Organizer is bug.  Plant a lot and on a system like mine should not be slow to react to what is.

  Don't have not even gotten to the part of the editor yet.  Hope it's not worse.

  Merry Christmas everyone!

  Title of the message was edited by: Brett N

  Hi all

  First of all, I would like to thank RDNelson for his remarks very insightful on the importance of the parameters when working with networks. More than just the physical capabilities of the material must be taken into account. I'm not trying to say that you cannot use a network with PSE, just that it is not recommended. When you start having problems, it is best to return to the essential to know where the question arises. Taking a network out of the equation will help tremendously. As a grown up Greg14, KISS.

  Second, sometimes it is a good idea to turn off features such as the autoanalyzer. This does not mean that everyone should do, but for some people, it would be preferable. Libraries of images and videos is going to be unique. I will admit that a few images and video have a hard time being ranked by the algorithms and it can become stuck in a loop of reanalyzing the same assets over and over again, or just don't get past certain elements. Again, I thank RDNelson for his excellent suggestion. If you find that you are having problems with the autoanalyzer, try his workaround to manually analyse in groups (new import batches, by album, by keyword, file, etc.). Then, if a particular batch cannot be parsed, these assets can be considered below to determine if there is a problem on their part. These questions may arise from invisible sources, such as metadata in the file that has been added by the device that created the file (like the camera Exif data or a scanner).

  Brand 'Crash Conrad', John Rellis has a Batphone for our engineering team. He has provided very useful information to both our developers and our clients.

  A note on the question of the selection of several files but only one file is imported. This seems to be a problem with the Windows Explorer on Vista/7 computers. This problem will not occur on the Mac version of the Organizer. Or it comes up with the same exact version of the software on Windows XP.

  In order to get to the bottom of one of the issues raised on this forum, we need to get more explicit information on when and how the problem occurs. If a network is the source of the problem, we need to know everything about this network for a solution of the engineer. All software has problems, but some problems occur only in very special circumstances that are not so happened that in the "lab". To find a solution, we must be able to reproduce the environment to find the cause and deal. All the information you can provide, so that anyone who reads this forum could reproduce the same behavior, would be of the greatest help.

  -Brett

• How can I configure a program to run on only one heart of my multi-core computer?

  Hello

  I have a multiple basic computer, except a very processor that is only designed to run on one heart program (maybe you have heard of him; Dwarf Fortress. Otherwise, it is not really necessary, but good). Now I wonder, how can I set the program to run only on a single heart, whenever I start it? I have a shortcut on my desktop, so if it is not possible to change the parameters of the program or other stuff like in Windows itself, I don't have the ability to change the shortcut to make it work on a carrot.

  Hello Drake1500,

  Thank you for using the Microsoft Windows Vista Forums.

  Since given as each program/software is configured differently to work on mulit or transformation of a nucleus there is nothing that Vista can do to change that.  You need to change something in the formula of the show itself.  I enclose a link below which talks about this issue.  Please let me know if you have any other questions.

  http://msdn.Microsoft.com/en-us/magazine/cc163340.aspx
  Optimize Managed Code for Multi - Core Machines James Microsoft Support Engineer answers visit our Microsoft answers feedback Forum and let us know what you think.

• WIN8 pro, 4 users, all accts, will load only one user app windows

  Hi, have windows 8 pro on a system. Works very well in most ways. One issue that has developed is with 4 windows accounts (3-wire), I could only load an application in a single account

  It was Khan Acadamy that I was trying to load them onto the child user accounts

  The app would not come upward in the store in the account of the children.

  even checked my apps @ in-store, on account of children, but nothing would be there down load

  Other low games loaded and have the same problem, only of the concerts for a user

  Thank you

  Hello

  I suggest to move the Khalaf account to administrator and then check to see if you can install the app from Khan Academy.

  If the above fails, try running the troubleshooter in Microsoft Accounts. It is an automated tool that can find and automatically fix some problems. It is available in English only, but will work in all languages.

  http://go.Microsoft.com/fwlink/?LinkId=268424

  I hope this helps.

• I am the admin on my computer and only one user, but I keep getting permission to access files

  I am the administrator on my computer and the only user, and yet it keeps telling me I don't have permission to access to the files.  Have tried to allow me access & permissions but it keeps telling me that there is a computer error.  Can you help me please?  Thank you

  How to open a file if I get an access denied message?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-open-a-file-if-I-get-an-access-denied-message

  What to know before applying permissions to a file or folder

  http://Windows.Microsoft.com/en-us/Windows7/what-to-know-before-applying-permissions-to-a-file-or-folder

• If I have my Mac factory reset can I download my Adobe CC once again, as I have only one user?

  If I have my Mac factory reset can I download my Adobe CC once again, as I only have one profile?

  I need to factory reset my Mac but use it to say that I would have used my only or can I download it again on the same machine?

  You can install cc on an unlimited number of computers.  the only practical limitation is that you need to access the computer to 'sign-in' on any computer that you want to use with cc.

  So yes, you can reset your computer without problem.  You can logout of cc before restoring it, but even if you forget you can disconnect from your computer no more-non-existent after reset using a new connection attempt.

• Login problem there is only one user on this computer

  When I try to login, I get this message-

  Your system is low on resources. You cannot open a session as a new user. Please use an account that has already been noted on

  See: http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/ec925cbc-51b1-4cfb-aff5-659be630606d

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• Cannot update windows because he says I'm not Admin, but I'm only one user on the RT button.

  How to regain administrative privileges on my device?

  Since there's a moment I've changed my Microsoft account info for access to my RT surface contact and now I'm not able to get the windows 8.01 update because he says that I am not the administrator.

  First, find where are all updates to windows. Go to control panel to control---> programs.  Then, under programs and features, you will see a link called "see updates installed". Under Microsoft Windows, scroll down to KB2871389. Uninstall and then to accept the demand for restarting your computer.

  Now, log in under your account (with administrator privileges) and then go into the corner until the floating menu comes up, then choose settings. In settings, choose Edit settings of PC downstairs. Then click 'windows update' at the bottom of the right side of your screen. Search for updates now and it will take a few minutes, but they will find a (KB2871389). There is a message saying it will download automatically in the coming days, but ignore that, click on the link to install the update/s now and choose install now (or something like).

  Connect with an account admin, go to the store, choose the 8.1 update and now no admin problem.

• Can I return only one page at a time because the drop down menu to go back multiple pages feature is missing. How to bring back this feature?

  Firefox 3.6, the buttons next and previous also had a drop down menu for me to jump to one of the last, say, 10 pages, I saw rather that only go back one at a time. In addition, the button reload seems to be missing and I can't find a way to get these. Otherwise, an upgrade is impressive; Thanks for all your hard work on this fantastic product.

  You can click right back or front button to open the history list.

• iPod nano plays only one song at a time

  We have two iPod Nano at home, and with both, must press 'next' to get another song. He just continues to play the same song over and over again... They both used to play shuffle or a whole list as requested...
  What is the problem?

  There is a setting on the iPod to repeat.  The choices for this setting are repeat Off (without repetition), all (repeat current list) and one (repeat current track).  Your iPod can be set to repeat one.

  If the iPod has a click wheel, the repeat parameter on the settings on the iPod screen.  Go ahead and repeat all or Offvalue.

  If the iPod is the current model touch screen (or previous gen 6), the setting is on the now playing screen.  The button looks like two arrows in a loop.  Tap to change the repeat setting.  See page 19 of the 7th gen iPod nano guide user (where it says repeat songs)

  https://manuals.info.Apple.com/manuals/1000/MA1624/en_US/ipod_nano_user_guide.PD f

  (If your nano 6th gen, you may need to drag the current playback screen to see the button repeat .)

• How to forward only one page at a time?

  I read scanned documents in various who were originally books and booklets. If I have the player mode page two, and I click the page up or page down arrow, player "turn the page". In other words, he's going forward or backward to two pages at a time.

  It's very annoying with these documents. Until very recently, it has only forward one page. In other words, if I was at the bottom of a left pairs page, by clicking on the next page arrow down took me to the top of the straight, odd numbered page. Need me now to the top of the next page. How to get back to the way things were before?

  If used to work like that and now it is not then maybe you have to downgrade to an earlier version. I don't think this is something, which you can specify in the application's preferences.