Programatically set passivate = true on a transient attribute

Similar Questions

• Immediate setting attribute set to true is not jump validations

  I have a requirement where there are a few fields in a form, which are mandatory fields.
  Out of these fields, one of the components is an inputComboboxListOfValues.
  At the end of this form, I have a cancel button that closes the form without validating.
  To do this, I have the code that looks like this,
  
  
  < af:inputComboboxListOfValues id = "personNameIdCombo".
  value = "#{Bindings.PersonName.inputValue} '"
  Model = "#{Bindings.PersonName.listOfValuesModel} '"
  simple = 'true '.
  required = "true" immediate = "true" >
  < / af:inputComboboxListOfValues >
  
  For the immediate listOfValues = true is necessary because the LOV does not get updated when the value is changed.
  For the Cancel button, I immediately set to true.
  
  
  Now the question is when I click on Cancel button that an error pops up saying inputCombo is mandatory and requires a value.
  Validation occurs still even after immediate is set to true.
  
  Pointers for this issue would be very useful.

  Are you using af:resetActionListener?

  In my case, I use like this:

  Kind regards

• Disabled property stripping does not work with the transient attribute

  Dear gurus,

  I have 2-attributes on page .jspx off including 1-is transient attributes with the default SQL and another column in the db table. I turn off the property for the two field whose appearance and usability are the same during development but showing a different behavior when running. Please find the attributes and the images.

  ApprovalStatus attribute is db-table column and AdfCreatedname is a transient with SQL as default attribute and appearance are different from db table column.

  < af:inputText value = "#{bindings." ApprovalStatus.inputValue}.

  label = "#{viewcontrollerBundle.APPROVAL_STATUS} '"

  required = "#{bindings." ApprovalStatus.hints.mandatory}.

  columns = "#{bindings." ApprovalStatus.hints.displayWidth}.

  maximumLength = "#{bindings." ApprovalStatus.hints.precision}.

  shortDesc = "#{bindings." ApprovalStatus.hints.tooltip}.

  Binding = "#{backingBeanScope.backing_ProposalSearch.IT10}" id = 'it10' "

  labelStyle = "' make-weight: Bold" disabled = "true" > "

  < f: validator binding = "#{bindings." ApprovalStatus.validator} "/ >"

  < / af:inputText >

  < af:inputText value = "#{bindings." AdfCreatedName.inputValue}.

  label = "#{bindings." AdfCreatedName.hints.label}.

  required = "#{bindings." AdfCreatedName.hints.mandatory}.

  columns = "#{bindings." AdfCreatedName.hints.displayWidth}.

  maximumLength = "#{bindings." AdfCreatedName.hints.precision}.

  shortDesc = "#{bindings." AdfCreatedName.hints.tooltip}"id ="it35.

  disabled = "true" labelStyle = "' make-weight: bold;" > "

  < f: validator binding = "#{bindings." AdfCreatedName.validator} "/ >"

  < / af:inputText >

  Development-image

  

  Picture of the production

  

  kindly let me know what I need to make changes. Please help me out.

  Kind regards

  MD Jahangir Pasha

  Hello

  I think that your transient 'AdfCreatedName' attribute has updatable property was never in your ViewObject.

  Set it to always get the same look as your attribute of "approval status".

  Kind regards

  Ruben.

• Problem of calculation the sum in the Transient attribute

  Scenario is,

  I have a form master detail. I want to make the sum of the Quantity column of the secondary table. I have visited many blogs for this tutorial.

  I made view accessor in detail in VO. Master then transitional attribute default Value Master VO, I set value Expression such as DetailViewAccessor.sum ("Qty")

  When I run BCJ4 tester. Transient attribute shows all the total instead of the current detail record. in tutorials they showed her work:)

  J Dev Version 11.1.2.4

  I did it. No need to create to display the details of Accessor.of to the master.  I used ViewLink accessor between master and detail as pictured

  

  then, by default value transient expression attribute, I wrote ShpContractDView.sum("Qty"), Inseated to the create view accessor.

  It is a success and Trail for me Ashish and Timo please tell me the concept behind what I did?

• Transient attribute problem

  Scenario is,

  I created a transitional attribute named SHOPLOC in my OE so that I can have this attribute accessor class in the EOImpl class. I also update my VO that inspires the OA so that this transient attribute appear in the original Version. When I try to set this transitional attribute in simple EO class to create the method code .my is below in the EO IMPL class

  	protected void create (AttributeList attributeList)
  	{
  	Super.Create (AttributeList);
  	String str = callFunction ();
  	this.setContractNo ("" + str.substring (0.11) + str.substring (str.length () - 4));
  	this.setSHOPLOC("testing");//str.substring(0,(str.length())-4)
  	this.setLocId (new BigDecimal (str.substring (9,11)));
  	}

  Persistent attributes of the OE works fine but transient attribute does not work. Why?

  Also, when I try using VO Attribute Editor default value for this attribute transient it works. and when I try to set the default value by using the EO editor then it doesn't show default value create. its attribute means transitional framework at EO level as no effect, the same value of this attribute set or not at the level of the VO

  J Dev Version 11.1.2.4

  in fact, I recreate the transitional attribute then my code below works

  	protected void create (AttributeList attributeList)
  	{
  	Super.Create (AttributeList);
  	String str = callFunction ();
  	this.setContractNo ("" + str.substring (0.11) + str.substring (str.length () - 4));
  	this.setCcode (9);
  	this.setContType ("SH_SALE");
  	this.setSHOPLOC("testing");//str.substring(0,(str.length())-4)
  	this.setLocId (new BigDecimal (str.substring (9,11)));
  	}

  A problem that has been. attribute name was SHOPLOC and COLUM_NAME in the editor, LOC_NAME salons,

  

  I renamed it which is the reason for which to get the problem

• Hide the line of adf table based on the transient attribute does not

  I have a JSF page where the user can insert new line in View object . this View object contains a transitional attribute which indicates whether or not the record is newly created.

  On the same page, I have a table adf which is bounded on the city view object . This table should show only newly created records. my approach is to use expression language of in the renditions property to hide all the other lines that are not newly created. I changed the render property for the columns of the table as: rendered="#{row.bindings.RowStatus.inputValue eq'new'}" , but the table does not show anything.

  Then, I tried to change the made not for the column property, but to the outputText inside the same way. It worked, but the problem is that the blank line is always on display.

  So, basically because I do not hide the entire line, instead I'm hiding the text in the lines and lines with spaces empty is still on display in the page aside.

  The Table of JSF page where the made property is applied on outputText inside the column:

  <af:table value="#{bindings.UplodedFilesView1.collectionModel}" var="row"
  rows="#{bindings.UplodedFilesView1.rangeSize}"
  binding="#{CreatSR_UserBean.fileTable}">

   <af:column sortProperty="#{bindings.UplodedFilesView1.hints.FileName.name}"
  headerText="File Name" id="c1">

   <af:outputText value="#{row.bindings.FileName.inputValue}" id="it1"
  rendered="#{row.bindings.RowStatus.inputValue eq'new'}"/>

   </af:column>

   </af:table>

  I use Jdeveloper with ADF technology 11.1.2.3

  Thanks Timo,

  You are right. Its to late to hide lines after stamping in the row set. I solve the problem by filtering the view object, based on the transitional attribute in the section of liaison page. The steps as follows: (assuming that the object from view with the temporary attribute has been created, and the transient attribute contains the filtered values)

  1. Drag the view object on the page and also make the Table (in my case it might otherwise listen)
  2. On the page, go to the connection tab.
  3. Double-click the object desired in the links column.
  4. New window will appear titled with (change the binding tree)
  5. Check the option (enable filtering)
  6. Select the (filter attribute) and (filter value) for the selected filter attribute.
  7. Select (Display attribute) you want to appear in the page.
  8. Press OK

• Create a view object with only transient attributes in its entity

  Hello
  
  With the help of ADF 11 g (11.1.2.3) with JHeadstart (11.1.2.1.28).
  
  I'm looking to create a new line for a view object that is supported by an entity that is not related to an existing database object:
  
  http://i.imgur.com/ex1Eqwq.PNG
  
  The view object has two lists of radio and a check box:
  
  http://i.imgur.com/sFWl5qF.PNG
  
  Normally, I'd create a page like the following fragment:
  
  
  1. drag the corresponding data control (for example, MyMedicationListView) on the JSFF.
  2. drag the create operation to the MyMedicationListView on the same page fragment.
  3. change the definition of page for the page fragment.
  4. Add an invokeAction for call to action of creation with a refreshCondition of #{adfFacesContext.postback == false}.
  5. remove the button create the page fragment.
  
  When users browse to the report page, the form elements to provide parameters for the report because there is an instance of line.
  
  I put:
  
  * Insert authorized einreihig? is checked.
  * New display at the entrance line? is set to true.
  
  Here you can see the other parameters:
  
  http://i.imgur.com/3DZBD7T.PNG
  
  Section 8.1.3 of the JHS Guide development (v11.1.2) pointed out that the executeQueryForCollection method can be overridden, but should match the settings that are currently enabled.
  
  When I build the application and go to the page of the report, no radio buttons are displayed. I expected to see the two sets of radio buttons. When I look in the generated page definition file, I see the following executables:
  

    <executables>
      <invokeAction id="clearDeepLinkViewCriteriaInvoke" Binds="clearDeepLinkViewCriteria" Refresh="renderModel"
                    RefreshCondition="#{'true' != pageFlowScope.jhsQueryByKeyValue}"/>
      <iterator id="MyMedicationListIterator" Binds="MyMedicationListView" DataControl="ReportingServiceDataControl"
                RangeSize="10"/>
      <invokeAction id="ExecuteQueryMyMedicationListInvoke" Binds="ExecuteQueryMyMedicationList" Refresh="renderModel"
                    RefreshCondition="#{jhsPageChanged}"/>
      <iterator Binds="ReportingServiceDataControl" RangeSize="25" DataControl="ReportingServiceDataControl"
                id="ReportingServiceDataControlIterator"/>
      <variableIterator id="variables">
        <variable Name="MyMedicationListRowKeyVar" Type="java.lang.String"
                  DefaultValue="#{bindings.MyMedicationListIterator.currentRowKeyString}"/>
      </variableIterator>
    </executables>

  There is no invokeAction for:
  

      <action IterBinding="MyMedicationListIterator" id="CreateMyMedicationList" RequiresUpdateModel="true"
              Action="createInsertRow"/>

  The result is essentially a form "in white": http://i.imgur.com/0cIeoeG.png
  
  When I look at the newspaper, I see:
  

  MyMedicationListViewImpl::buildQuery SELECT  FROM MYMEDICATIONLIST MyMedicationList

  This generates a resumption of flight of exceptions (the request is absurd: there should be no application because all fields are transient). I've tweaked the ViewImpl as follows:
  

    public String buildQuery(int noUserParams, boolean forRowCount)  {
      String query = super.buildQuery( noUserParams, forRowCount );
      System.err.printf("MyMedicationListViewImpl::buildQuery %s\n", query);
      
      return "SELECT 1 FROM DUAL";
    }

  The executeQueryForCollection did not work (because the getEstimatedRowCount triggers the incorrect SQL statement), so I have injected a custom rowcount:
  
  http://pastebin.com/UKPiEs03
  
  How to create an instance of line valid using JHeadstart?
  
  Thank you!

  Dynamic areas are not configured correctly.

  By connecting the dynamic field to the corresponding view object (that is, the areas >... > query parameters > data collection), option buttons appeared.

• HO to calculate the average in the Transient attribute?

  Hi experts,
  
  I created a transitional attribute in the employee table to calculate the average skills employee.
  Am able to get the sum of skills but dono how to calculate the average. Please help me in this problem.
  
  code to calculate the sum is
  
  public getEmpOverallRating() number + {+
  RowIterator comp = getEmpSkillView();
  Number sum = new Number (0);
  + all in (comp.hasNext ()) {+
  sum = sum.add ((Number) comp.next () .getAttribute ("Ratting"));
  +}+
  to return the sum;
  +}+
  
  Thanks in advance,
  Knockaert

  Set the default value of the transient attribute to type of expression with a value like SkillView.avg ("Rating") where SkillView is the VO.

• FS autohide toolbars does not, to hide the toolbars on the value and set to true, help browser.fullscreen.autohide?

  Basically, I guess when you go full screen mode, tabs and the search bar should hide automatically until I move my mouse to the top of the screen to the right? Well, this does not happen despite try the suggestions on other threads for example right click on an empty space next to the tabs and hide toolbars check (already verified on) and goes up to about: config and check browser.fullscreen.autohide is set to true.

  However, I have two other options which I think might be a clue as to the problem. There is an extensions.browser.fullscreen.autohide that is set to TRUE and extensions.fullscreen.noautohide set to FALSE.

  Is there an extension or add-on I could interfere? I have installed... session maybe Manager what could be?

  On the Mac screen mode works differently.

  You can try this extension.

  • Old Lion full screen: https://addons.mozilla.org/firefox/addon/old-lion-fullscreen/

• still, mail. Identity.default.suppress_signature_separator set to True does not work, is their a new patch?

  I still have the '-' applied above the signature even after applying the fix to mail.identity.default.suppress_signature_separator that is set to true. Have tried running Thunderbird in safe mode, always have the same question. Have restart the computer several times, always have the same question. Reading a lot of messages on it, but don't say that it does not work even after you apply the hotfix does not. All of the suggestions. Pure install any extensions or add-in.
  User Agent Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.6.0

  The fixed. completely removed Thunderbird, user and folder programming created by thunderbird profiles. Deleted file folder in windows. Rebooted PC. Installed Thunderbird. Add an account. Went to change only the settings in the config to remove the signature separator. He then worked.

• 'Check if set to True, then continue' - how to implement?

  Hello community LV.

  I am creating a VI that checks if a certain condition (in this case, only the wavelength that is off my monochromator is the correct value) is set to true, then continues and takes the action. I tried to use a combination of a business structure and a timed sequence (see screenshot - I'm an autodidact and a newbie so sorry if it's a stylistic disaster), but the case structure requires that there is an entry from the case 'false' in the tunnel. Just that he do nothing if the case is false - I want all "false" entries would be added to elements of the table 'sum' and spoil my data (right?), so I don't want that.

  Thank you!

  If you expect something to be true, it means that you must keep a loop and test the condition until it happens.

  Heard that you work with an engine displacement and a series of steps that involve certain expectations between the two, it looks like you should develop a "state machine" architecture  Search the forums on this topic.  There is even a model for him in LabVIEW.

  A state machine allows a sequence of events occur, but you build in intelligence, so that he will know when to switch to the next step, or when to return to the stage even (for example to measure something and check the new State), or maybe even go back to an earlier stage.

  I see that you have potential competitive conditions in your current code of how you use local variables.  In the loop just For, you're current wavelength reading in 3 different places and write about it once.  But you have a race between when a reading and an update occurs and when it is read in two other places. Not sure if you have an old current wavelength or wavelength of current newly updated at each iteration of the loop.  Just look at your code, I can't even tell which way you want it to be.

• Single command to set "CapturePacket True" on all transmissions?

  Is there a single command to set "CapturePacket True" on all transmissions? Or I have to create a script to copy and paste that tells the ID to capture the packets for each signature one by one?

  Thank you!

  Jim

  If you ran IPS v5, via IDM (https protocol and the sensor directly), you would be able to signatures 'select all' and enable "verbose alert" which is the 5.x equivalent of "packet capture" in a single action for all signatures.

  Via IDM in 4.x (which judging from your question that you are running) - No, can't do it. I forget if there is a way through IDSMC (part of the VMS package) to do this, though - I seem to remember that it is not.

• What is the best way to set a default value on an attribute that is dependent on a query?

  Hello master,

  I use Jdev 12.1.2. I have a project requirement where I have to set a default value for an attribute. The default value is derived from an SQL query.  I was intending to set the value of the Create method of the entity using VO class. But I preferred to have an opinion on if I do best.  Please advise

  Thank you and best regards,

  Mohamed

  It is a logical place, so just go ahead with this...

• How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  Mr President.

  How to add a transient attribute of a table values in the new attribute group wise transient that is to say wise customer?

  as below

  

  Concerning

  Hello world

  for an overview in the following form

  

  This is the sql query that reach this format

  SELECT c.name customer_name,
          p.name product_name,
          sl.sal_qty,
          sl.unit_sal_price,
          sl.sal_qty*sl.unit_sal_price AS salesvalue,
          CASE
            WHEN ROW_NUMBER () OVER (partition by c.cust_id order by p.prod_id desc,sl.sal_id desc) = 1 THEN
                SUM (sl.sal_qty*sl.unit_sal_price) OVER (PARTITION BY c.cust_id)
          END totals
  FROM customer c INNER JOIN sales s ON s.cust_id = c.cust_id
  INNER JOIN salesline sl ON sl.sal_id = s.sal_id
  INNER JOIN product p ON p.prod_id = sl.prod_id
  ORDER BY c.cust_id,p.prod_id,sl.sal_id
  

  Cheers and enjoy

  Respect of

• VO extension: Transient attributes not getting seeds not filled

  Hi gurus,

  I expanded VO by adding two additional columns (questioned). Even if the new columns and surveyed existing columns are coming fine on the page, the calculated columns return null.

  Calculated columns are populated in the VORowImpl code seeded of the VO seeded. I'm missing something here?

  see you soon

  Anish.

  Hi Anish,

  If the transient attributes will be populated in the VORowImpl, you must copy the logic in the extended VORowImpl or call the same method using super.

  ex: -.

  Standard VORowImpl

  public String getAttribute1()
  {
     return "Calculated Value";
  }
  

  VORowImpl extended

  public String getAttribute1()
  {
      super.getAttribute1();
  }
  

  See you soon

  AJ