Programs stop responding and start over

Similar Questions

• striking of svchost.exe running 60%-90%-100% cpu, programs stop responding and no work is done

  Svchost.exe (DcomLaunch), (LocalServiceNetworkRestricted), (LocalServiceNoNetwork), (NetworkService), WmiPrvSE.exe all use a percentage high CPU at the same time and once the CPU reaches 100%, no job-processor programs remains 100% different services 'line up' one after the other in the resource monitor. There has been several cases where an odd address momentarily appears on the tab of the Firefox home page at startup. Also had the pop-up WARNING this computer is "exceeding number of 16-bit programs running. Restart is 'ignored' and need to turn off the computer and start to break the "line-up".

  Avast, Spybot S & D, Windows Defender, all up-to-date and not find anything. Used Microsoft tool of support of emergency with nothing to be found.

  PH

  I've never seen WPR cause this kind of issue. If you want to try aand the system repair please do below.  It may be just more easy to restore from a backup, or do a clean install of windows.

  What may have caused it

  Run-Malware malwarebytes

  System question - may be why svchost was using high CPU (run a filesystem check)

  Hardware HD-question-run CHKDSK

  Please download the free version of Malwarebytes.

  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

  CHKDSK /R
  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found all the data available in this area could be lost so as always back up your data.
  Run CHKDSK /R from a high command (run as administrator).
  Do this for each hard drive on your system.
  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.
  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  CHKDSK LogFile:
  Click Start and type "eventvwr.msc" (without the quotes) and press enter
  Expand the topic the Windows logs, and then select the Application log file entry.
  Double-click the Source column heading.
  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
  Copy / paste the results in your next post.

• I downloaded service pack 3 and it changed and took some of my programs.how can fully restore the initial configuration and start over?

  I downloaded service pack 3 and it changed my programs taking some. How can I reset and delete and go back to factory settings and start over?

  Hi Daddyguy,

  Please read this article which gives detailed instructions on how to restore Windows XP to a previous state. http://support.Microsoft.com/kb/306084

  I hope this helps. Just reply to the results.

• I managed to install and started to build my site, to discover my library of widgets, States and scrolling effects selections don't respond to clicking on them or open somehow. I need to reinstall and start over?

  I managed to install and started to build my site, to discover my library of widgets, States and scrolling effects selections don't respond to clicking on them or open somehow. I need to reinstall and start over?

  Are you referring to the widgets etc that you have added to pages or the actual interface of Muse?

  If it's things on the page then you most likely have an empty element above them. Do a select on your page and make sure that there are no elements that overlap your clickable items. Also make sure your clickable items are highest in your layers panel.

• Pavilion 6154ea: Radeon display error - display driver stopped responding and has recovered

  Received a UN expected error in the web search, actully screen off for a few seconds before receiving an error on the display driver stopped responding and recovery.

  Took a glance in the peripheral section where the 2nd adapter displays without any sign of error.

  After recently installing a new SDS moving from the HARD drive, reinstall windows 7 etc via the updates and the order to make recovery disc the laptop because I used receive a blue screen error frequently, so that the display driver does not not error occasionally when using the design programs.  Therefore assumed, needed a new HDD/SSD and factory restore.

  -Laptop computer has been cleaned withdrawal because keyboard, frame etc. with solvents as a cleaner. Therefore cannot be over heating the fan works hard to due and SSD.

  -Power supply has been connected to the time

  N ' was not overclocked as it is when using disk HARD aswell

  It wasn't until today where it happened again, without the blue screen though. So decided I would look at him and realized it is a common problem with the ATI drivers, when I assumed it was a HARD drive failure all along.

  This time the screen turned off for a few seconds, more then previously which is a little disturbing. Was only using a search engine with no program in the background. Infact havn't got round to reinstall files and software so the laptop is very clean and basic and works so don't know why I feel this fast.

  Need to know your opinion on this please, may not know... (Radeon HD 6490M)

  Thank you

  Hi @skibbles,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question in the subject of your HP Pavilion dv7-6154ea Entertainment Notebook and problems with the display driver stopped responding. I recommend to restore the default BIOS settings. You could restore the BIOS with this document by selecting the reload the default BIOS settings. This resets the hardware parameters and contributed to others.

  Here is a link to test the material if you need it. It checks the pieces to see if something is a failure.

  Please let me know how it goes.

  Thank you.

• Display driver stopped responding and has successfully recovered

  Hello

  Yes, I know, there are discussions and topics about this problem here, but I read some of them and none of them helped me to solve my problem.

  CPU: intel i5 750 2.66 GHz

  motherboard: gigabyte p55-usb3

  VGA: sapphire radeon hd5850 toxic

  RAM: geil 2 * 2 GB ddr3 1333

  Ok. When I go to apply 3d in win 7 64 bit, after a few minutes, the screen freezes and the program crashes and I get this:

  «"" driver AMD display driver stopped responding and has successfully recovered.»»» » »

  I had this soccer10, assassins creed 2, crysis warhead, benchmark of sky, nba 2 k 10, etc.

  things, I did and did not help: I reinstalled programs, reinstalled windows, all drivers updated, update the bios of the motherboard and vga, windows update, checked the hardware, cooling systems, etc...

  I know it seems like a hardware problem, but since I don't get it in win XP, I think it's a windows problem. See, I played assassins creed 2 on higher graphics options (60 fps) for many hours, I have same finieshed crysis warhead with keen twice under XP. No problem.

  but in win7, I always have this error even in circles low, and when the vga is 40 to 50 degrees Celsius.

  Thank you

  Hello

  Check with Sapphire Support and Forums (for the known issues and solutions) and drivers.

  Sapphire - Support
  http://www.sapphiretech.com/presentation/support/?PSN=0002

  Sapphire - drivers
  http://www.sapphiretech.com/presentation/downloads/download_index_01.aspx?PSN=0006

  Sapphire - communities and more
  http://www.sapphiretech.com/presentation/Member/member_index.aspx

  ==============================================

  Try this even if you did similar before.

  Download the latest version of the driver, but DO NOT install it again.

  Start in Safe Mode - press F8 several times.

  Panel - Manager of devices - graphics cards - click on - UNINSTALL - check of control
  REMOVE DRIVERS
  
  RESET

  Now go to where you put the drivers and click right on - RUN AS ADMIN.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• video card error message, "nvlddmkm.sys has stopped responding and has recovered."

  My computer has an nvidia 9800 gt. Since then, a week ago that I am unable to play a video game, or use windows media center. If I ever start a video game or windows media center the program crashes and I get the error message, "nvlddmkm.sys has stopped responding and has recovered." A few times, I get a message from the blue screen and the computer needs to restart. I reinstalled the drivers and even restored software from my computer to the original factory condition. A year ago I noticed my computer screen would get dark, as if I was wearing sunglasses. I want to restart my computer and the screen would be normal again. I was wondering if my video card burned to some, and if I need a new video card. The average temperature of my videocard 76 degrees Celsius, is 167 degrees Fahrenheit.

  Hello

  The best sources of information would be Nvidia Support, their documentation online and their
  forums. Try to remove ANY power and reseating the cables (both ends, memory and cards
  When possible) - in fact, remove and replace - do not just tight. Clean the dust bunnies
  and vents. Make sure that the internal fans are working and trying to use a small fan to blow
  directly into the inlet to see if that helps.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  ==============================================================

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Display driver stopped responding and has recovered the problem

  I got a Dell Inspiron M5040 with Windows 7 for Christmas 2011 and I started to use Windows Live Movie Maker, but whenever I get in the middle of editing a video, the screen went black for about a second and says "display driver stopped responding and recovered." The first time this error message has occurred, the laptop computer itself restarted and is went to a blue screen with the text, telling me to go into some sort of 'safe mode' (I couldn't read the text in time). I have all the latest drivers, my laptop is new, only yesterday lit.

  What can I do about it? I really want to use Movie Maker. I'm new to the Forum, so I hope someone help me. Thank you very much. Any help is appreciated.

  Hi James

  What you see is called the action process.in TDR (Timeout, recovery of the display).

  In earlier versions of windows when the display device ran out of resources throughout the system would stop responding which would require a reboot to recover.

  In Windows 7, if the display device is not responding, the system will try to stop and restart the device to recover.

  More information on this feature can be found here (Advanced): http://msdn.microsoft.com/en-us/windows/hardware/gg487368.aspx

  The most common reason for this problem is that the display device is overloaded or used beyond its capabilities.

  This happens more often when reading graphic intensive games, but can occur with any process that uses a large amount of graphic resources, such as you see when you edit or create videos.

  What you can do to avoid these problems:

  1. only this type of procedure when the laptop is connected to a source ca.

  2. in prior to starting video editing, restart the computer.

  3. close all other running programs to ensure that all graphics resources are available for video editing.

  Windows Live Movie Maker Help Center - what is the system requirements? :
  http://explore.live.com/Windows-Live-Movie-Maker-system-requirements-UI

  Concerning

• Display driver stopped responding and has recovered the display driver NVIDIA Windows Kernel Mode Driver

  Hey guys I have a problem that is really starting to stop a little worth. I recently bought this desktop computer and I had problems with the GPU drivers when I play some games. In the middle of my game, I am reduced to a minimum and maximized every 15 seconds and have the error "display driver stopped responding and recovered, NVIDIA Windows Kernel Mode Driver display driver." I tried SEVERAL solutions from different threads, and I still have this problem.

  Things I've tried:
  -Added a TdrDelay (8) in my regedit
  -Defining my CPU PhysX on my GPU instead of automatic selection
  -Install an older driver over the last.
  Specifications of the PC:
  -8 GB DDR2 RAM
  -Nvidia GeForce 9800 GT Galaxy
  -Power 500w S
  -Card mother ASUSTeK Computer Inc. M3N-HT DELUXE
  -Microsoft Windows 7 Ultimate 64-bit free multiprocessor-7601 Service Pack 1
  -AMD Athlon (TM) 64 X 2 Dual Core Processor 6000 +.

  Hi Vexin,

  Try the following steps to solve the problem.

  Step 1:

  I suggest you uninstall the device of the graphics card from the Device Manager.

  To open the device in Windows 7 Manager - check this link.

  Once uninstall you the graphics drivers in the Device Manager restart the computer.

  Step 2:

  Visit the manufacturer's website and download the latest drivers for the graphics card.

  Link to the manufacturer's Web site.

  http://www.GeForce.com/drivers

  I hope that helps!

• Pomp L855 - 11 p: AMD driver stopped responding and has recovered

  Hello
  I bought a Sattelite L855 - 11 p a day ago. Since it first started, I have a problem with the ATI driver. At the time at the time, the PC is locked with yellow dots on the screen, and about 10 seconds later, I get following error messages for Windows 7 64-bit:
  -Display driver stopped responding and has recovered
  The AMD driver did not

  The PC is just out of the BOX.
  Toshiba updates: Assist and BIOS
  In addition, updates of Windows 7.

  Any ideas?
  Driver package: 8.932.5.3 - a-132503C-Toshiba 120120
  CCC Version: 2012.0120.420.7502
  OpenGL Version: 6.14.10.11411
  Direct 3D Version: 7.14.10.0889

  CPU: AMD Radeon HD M 7670
  BIOS version: 013.012.000.041
  Reference to the BIOS: BR42875.003

  Satellite:
  BIOS v1.60
  Windows 7 Home premium SP1

  Thanks in advance

  Large.
  Thanks a lot for your ad and your solution. :)

• Qosmio G50-10 q - driver has stopped responding and has recovered

  My father has a Qosmio g50-10 q for more than a year, and as he bought it he could not see the videos with a resolution more than 640 * 480 and preview of the photos by right click on them and select Preview.

  The problem exists on the operating system preinstalled Vista and today Ive tried to install an operating system windows 7 Professional 32-bit edition.
  The problem is he stil.

  I downloaded the drivers from the official website of toshiba.
  After a lot of testing, I downloaded nvidia nvidia drivers but the problem is exactly the same.
  I am a COMPUTER expert, but I've never found a problem not solved like this.

  I can not even go on youtube and watch a video in full screen.
  Whenever I try to play a video, the screen will start to Flash and then the video becomes black and a notification that says "display driver stopped responding and has recovered".

  I can't even see the video demo in the video folder of windows (wild life).
  And the situation really strange when I click with the right button on an image and select Preview. It shows a white or a black image.

  If I press the button of the screen adjustment, the image appears, but when I go to the next pixture I can't see him again.
  If I choose to see a presentation full screen, I can see all normally.
  Its really frustrating for a laptop of this award and I don't know if this problem is drivers or the 9700 M GTS was defective from the start.

  I hope I can find an answer here before I return it to Toshiba

  Thanks in advance

  Hi mate

  I had the same error happened on my laptop satellite.
  The display driver crashed and recovered
  I've updated the display driver and this has solved my problem.

  In your case, it of really strange that you can not watch movies in 640 * 480 or higher
  Maybe you need to update the BIOS. Check if there is a newer version
  If so, then an update of the BIOS would be worth a try

  Sorry, but I have no other recommendation for you outside the update driver as mentioned it has helped in my case

• Satellite A500 - NVIDIA driver stopped responding and has recovered

  Hello.

  I have a TOSHIBA Satellite A500 1pj. I bought this laptop 1 mounth ago and 2 weeks before I start to have problems with him. The screen it goes black, like 2-3 seconds, after East appear this message "Nvidia driver stopped responding and has found" is really starting to stresses out me. I have install the laptop with all its original pilot and original sound of Windows 7. I have reinstall everything, or anything else.

  The ar updates to DATE, and I have no idea of what he wants in life. These are all the new models? Start making the problems early? I'm waiting for answers...
  Thank you...

  Hey Buddy,

  If your display driver is up-to-date, you wouldn t get this error ;)

  As wrote Akuma, Toshiba has released a new driver for this laptop that solved the problem. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  If you are not sure, check the forum discussions. You will find enough on this topic.

• Re: Qosmio X 500 - 11Z - display driver stopped responding and has recovered

  REF: PQX33E-02J00TCZ

  Hello, I had this problem:

  my friend bought new Qosmio for games... and the problem is with the graphics card Nvidia GT 360 M
  graphics card says this: display driver stopped responding and recovered... the screen flashes twice and its ok.
  its when I start windows (windows 7 HP 64 bit) or when I click in the Device Manager on the graphics card, on Internet when I surf... ordinary work, anything heavy for laptop as this :-)
  I changed my driver - standard uninstaller, then clean the pc with cc cleaner and install new drivers
  error still persists to say that...

  I tried the drivers nvidia and support toshiba official. the same two. problem remained.

  can anyone help?

  Hello

  To be honest, it is one of the most annoying problem in this forum. You can find many threads dedicated to, display driver stopped responding and has recovered, problem. There is no good solution for it. I solved this problem by installing a driver from nvidia.com site viewing, but I Gt 230 m. Don't know if this can help you too...

• HP ENVY 15 Notebook PC: Intel HD 4600 graphics driver has stopped responding and recovered after upgrade Windows 10 1511

  16/11/2015 Microsoft installed automatically 'upgrade of 1511' on my Windows laptop, 10.

  (This laptop has been previously successfully upgraded to window 8.1 for Windows 10 in August.)

  After the upgrade of 1511, I started to receive the following error while playing at Microsoft games:

  "Display driver stopped responding and has recovered - Display driver Intel HD Graphics driver for Windows 8 (R) stopped responding and has recovered."

  According to Device Manager, installed upgrading driver 10.18.15.4256 dated dated 15/07/2015.  I did a restore to 10.18.15.4248 as dated 29/06/2015.  This has not solved the problem.

  I checked HP Support Assistant and apply labeled sp72370 10.18.15.4248 Rev c dated 05/08/2015.  This has not solved the problem.

  I am committed service HP Smart friend and they are reapplied 10.18.15.4248 via Device Manager web search pilot.  It has installed Intel Driver Update Utility 2.2, but the newer driver has not been installed because of "driver installed by manfacturer (HP).

  HP support person recommended restore new to restore point before Microsoft «upgrade» 1511   I was not comfortable doing so, as 'upgrade' was an important update from Microsoft by using the same process as the initial migration of Windows 8.1 to Windows 10.  The customer can no longer control the timing of updates and upgrades are cumulative - is no longer able to choose specific updates.

  For now I'm wrong to live with this error condition, as seems to have an impact on games and not other normal operations.  My laptop there one provided by HP NVIDIA Geforce GT 740 M, which is Windows compliant 10 and seems to operate normally.  Some of my apps choose the Intel driver, and others choose the NVIDIA driver.  I don't know how applications choose which one to use.

  What a problem like this to be resolved when Microsoft control completely the update mechanism and HP doesn't seem to update drivers available via the HP Support on a basis common?

  I've disabled the Intel HD graphics driver and used the NVIDIA graphics driver for the game.  No problem.

  Disabling the driver Intel resulted in the reving fan at a higher speed intermittently.

  Support for HP Smart friend assured me that the behavior of higher fan speed would not result in problems with premature failure on the road.  You agree?

  They said that my choice was to keep the disabled Intel HD graphics driver and use the NVIDIA only, or living the problem until HP one releases pilot newest Intel - it affects only game, all other functions seem normal.

• KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.

  After believing that my computer has somehow a virus and spend hours trying to solve the problem, I think that an update is causing the problem: I solved it by following these steps:

  KB2286198 Windows Update causes Windows Live Messenger stops responding and crashed.  Resolution: restore to before the update has been activated Windows installed updates and hid the update, so it would not automatically reinstall and the program works.  Please, difficulty of the update or rewrite it.  I can't imagine that I'm alone on this breaks.

  You will find support for Windows Live Messenger in these forums: http://windowslivehelp.com/forums.aspx?productid=2

  You can find support for the installation/uninstall/upgrade / upgrade to Windows Live Essentials in this forum: http://windowslivehelp.com/forums.aspx?forumid=a372972e-8e7a-4d85-adc3-a1b43e8c02ec

  Note: In the not-too-distant future, Windows Live Essentials 2011 QFE2 will be a mandatory update.