I downloaded service pack 3 and it changed and took some of my programs.how can fully restore the initial configuration and start over?

Similar Questions

• How can I get the print spooler to start when the file is missing: lexbces.exe? where can I download this file?

  I TRIED TO RE-INSTALL MY HP WIRELESS PRINTER AND IT WOULD NOT INSTALL. I HAVE RECEIVED AN ERROR MESSAGE THAT THE PRINT SPOOLER WAS NOT WORKING AND STOPPED. I have TRIED TO START THE PRINT SPOOLER AND FOUND what IT MISSING THE lexbces.exe FILE. I THINK THAT WHEN I UNINSTALLED THE HP PRINTER, HE WALKED OUT OF THIS FILE. IT IS IN THE SYSTEM 32 AND A FILE OF REMOTE PROCEDURE CALL. DOWNLOAD THIS FILE OR DO I HAVE TO RE-INSTALL WINDOWS XP?

  Lexbces.exe is from Lexmark (or Dell-badged Lexmark) printer install.  When the Lexmark printers are installed, they configure the print spooler to depend on Lexbces.  Unfortunately, when you uninstall the software Lexmark, the uninstall program removes the file but does not have the print spooler dependency.

  Open a command prompt window (start > run > cmd > OK)
  Type the following line in the black command prompt window and press enter

  dependent on the spooler of sc config = RPCSS

  Note that there is no space before the = but there is a space after it.

  Restart the computer.

  See the instructions on One Article to do a clean installation of your printer.

  After the restart, you can check that the print spooler has started in several ways.  One way is:

  Open a command prompt window and type the following command, and then press ENTER:

  spooler request SC

  You should see the following in the command prompt window:

  spooler request SC

  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, ACCEPTS_SHUTDOWN)
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

• I downloaded Service Pack 3, and now my Disk Defragmenter does more

  After that I downloaded the Service pack, I can not load Disk Defragmenter. The system restore was put there where there is no Checkpoint earlier when it has been installed. Help!

  Hello

  Do you currently or have you ever had a third-party disk defrag tool (such as Diskeeper, Auslogics, etc..)  Installed and uninstalled then?  Sometimes no will again put the original XP Defragmenter settings so you have to put yourself back in to re-record some DLL files.

  To do this, click Start, run and in the box type each of the following lines one at a time, and click OK to run each of the commands one at a time:

  regsvr32 dfrgsnap.dll
  regsvr32 dfrgui.dll

  When the process is completed for each DLL, you sign up, you should see a message similar to the following:

  DllRegisterServer in ... Succeeded.

  It's good to register the dll, even if they are already registered.

  For more information, see this link:
  http://support.Microsoft.com/kb/922379

  It will be useful.

• Willnot work downloaded service pack 3 and printer

  I have not dated the service pack 3 update, and now my printer is not working.  It indicates that the print spooler service is not running.  It was working fine until I have up dated service pack 3 undate.  What can I do to get my printer to work again.

  Thank you

  Michael

  Start the print spooler service.

  For Win XP - Click Start, select run, and type Services.msc

  Look for print spooler - make sure it is running and automatic.

  Reference only-

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

  A print spooler is software that temporarily stores the disk printing hard or in memory until the printer is ready to print. If you were expecting an abnormally long time to print a document, or if you see an error message about the print spooler, Spooler subsystem or spooler resources, you might need to change and then restart the print spooler service on your computer.

  To do this, we recommend that you save your work and restart the computer to restart the print spooler service. If you do not want to restart the computer, try these steps.

  To change or restart the print spooler service

  You must be logged on as administrator to perform these steps.

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then Tools clickingAdministrative.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Right click on the print spooler service, and then click Properties.

  4. On the general tab, next to startup type, make sure that thatAutomatic is selected.

  5. If the service is not already running, under State Service, clickStart, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• You can download service pack 1 and 2 correctly for me, sp1 has been downloaded many times, but I get pop ups, saying: I do not have sp1 and I don't know where the sp2 went his lost

  you have my permission to connect to my laptop to do what must be corrected. Thank you

  Hello

  I'm sorry, but we do not dial out.

  We provide the information that you can use yourself.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Sir, I have windows 7, after the creation of PDF files the icon was in solid color red and grey, but now the icon changed to adobe acrobat 7 professional, logo, how can I get the icon or the old logo for my PDF files as the previous icon is very easy to i

  Mr President

  I have windows 7, after creation of the solid color red & gray icon PDF files, but now the icon has changed to adobe acrobat 7 Professional logo, how do I re obtain the icon or the old logo for my PDF files as the previous icon is very easy to identify, also I used acrobat adobe 7 Professional but this problem was not there.

  Hi manojp35249311,

  Acrobat 7 is not compatible with Windows 7, so it's difficult to judge how the application on an incompatible environment will behave.

  Please attach a screenshot so that we can diagnose the problem correctly.

  Kind regards

  Nicos

• How can I get the error "Unable to start the service" on attempts to run administrative tools (including the Services application) when logged in as an administrator?

  A large number of menu selections is affected, including the 'computer management', 'Event Viewer', 'Services' and 'System Configuration'.
   
  I tried to clean a computer that was thus invaded by unwanted applications and the services that it was unusable.  I applied several sets of Windows updates until it has been fairly stable, then lightened through the Services application services, changing many services 'automatic' to 'enabled' or 'disabled '.  I suspect that some service necessary for the performance of the foregoing has been inadvertently stopped.  (None that he was '' strongly recommended '' or '' recommended '' do not turn off or the description seemed to make a requirement, but...)  I don't know how to confirm this theory, identify the missing service or reactivate a service without the Services application.

  I got lucky.  I called a local, independent computer store.  Their support staff (after confirming that I had an appropriate Windows license) told me that if the computer came with a disk for Installation of Windows Vista, there is probably a partition to start installation on the hard disk, I could get to with a special touch at the beginning of the start-up phase of the BIOS.  It flashed by so quickly that I missed my chance, so I put off the power while trying to boot Windows.  On my next attempt, I missed again (even if I managed to spot the key combination - F11).  But when he arrived at the start-up phase of Windows, he offered me a chance to run the system restore which was banned when I was logged in with an administrator account.  I had to go back a ways, but I found one who would start and was able to complete cleaning of the machine and make it to a usable state.
   
  Thanks to all who responded.
   
  Oh, and it seems (according to my conversation with the service of the local computer store) that my fatal mistake was by disabling the service allowing you to promote its own security.  Apparently an administrator account is not the rights needed to perform most administrative functions without it; If disabling the service gets you into a nearly unrecoverable state.  A hint of that in the description of the service, or even a total ban on deactivation, would be a good idea.
   
  -Kevin

• How can I delete the previous configuration of Essbase Server Shared Services?

  Hi all

  I am trying to reinstall the Essbase Server (on a new server we have upgraded the Essbase server hardware) and reloads the data, but the current installation believes that I have already set up despite the withdrawal EssbaseCluster-1 of Shared Services Application groups.  Is there something else I need to do to get the new install Essbase server configured as a new instance of Essbase?

  Thank you
  Ryan

  If the server names have been changed, then it probably won't work, but I don't know what you mean that it did not work, you should check the registry of shared services, other possibilities are reset configuration tasks in the registry by using the epmsys_registry utility.

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Windows 8 makes changes to my computer (sort of disks), how can we recover the display of windows 7 my computer?

  I was a user of windows 7, but then I go to windows 8.1

  I like all the changes in the OS interface.

  but the only thing bothers me is the interface has changed to my computer.

  1 windows 7

  all drives used to be classified in categories like hard dick and drives, removable storage and sometimes others, as in the image below

  

  2. now in windows 8.1

  all readers are scattered and its really annoying for me because I just formatted my local disk with data of the IMP.

  and this is the 4th time I accidentally formatted wrong drive because of this disorder (in the picture below)

  

  • marked blue is my optical drive and it used to be in the category of mailing
  • all red marked readers are external and used in the third category

  Please help me to get back to the old view of windows 7.

  Thank you

  Maybe this could help you

  Check out these links:

  http://winaero.com/blog/how-to-ungroup-and-separate-removable-drives-in-this-PC-in-Windows-8-1/

  http://www.askvg.com/how-to-separate-devices-and-drives-section-in-Windows-8-1-Explorer-this-PC/

• AI can't print a worksheet that was downloaded from an another computer google doc will not except to print. How can I print the worksheet?

  a friend made a spreadsheet of my blood sugar readings from their computer. She has downlaoded on my computer. He returned on the Google doc, but doc Google won't allow us to print, how the seprate pages, it shows only a page at a time? When you click the button print he reveals a download file pop up box asking you to you want to save or open the file? How do it make me print?

  This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions.  Ask your question in the forums of Google Docs for the digital paintings: http://www.google.com/support/forum/p/Google+Docs/label?lid=4c7c98a970adf580&hl=en

• Help every time I download Service Pack 3 for XP I have to System Restore my computer because I can't start windows normally. Can someone help me solve this problem?

  After I succesufully download service pack 3 and restart the computer, need me a black screen where I have the options of safe mode, safe mode with network, last known working configuration and start windows normally. Whenever I have select start normally or last known working configuration it takes back me to the same black screen. IM on safe mode with network now. im going to leave it until I can understand it.

  Yes, I have a HP with AMD processor

  I had a feeling. :-)
  See these two pages to your solution:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)
  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• Installation of Patch of the recovery Partition has been a success, but I am unable to download Service Pack 2 to upgrade

  Having the upgrade of questions after recovery on Windows XP Edition version 2002 service pack 1 family. Okay, I found the recovery partition patch I needed and download claims it was successful, so I then try to download the Service pack 2 and nothing happening, no error, nothing. Still not sure that it worked. Yet I am unable to download service pack 3 and my updates still do not work. So I guess that the Service Pack 2 does not load correctly. What should I do now? Help?

  The other post:

  Recovered Windows XP cannot be upgraded to SP2, think I need recovery for SP1 Patch of Partition. How can I find to download?

  Windows XP Home Version 2002 Service Pack 1 "computer" would not start. I could only get it back. This causes problems. Unable to retrieve the updates I have. Impossible to download the Service Pack 2 update the others. My automatic updates do not work. When I tried to download the SP2 it stops and gives me an error message: epplauncher.exe point of entry not found. Encode pointer was not found in the library of dynamic links Kernel32.dll.Can someone help me?

  Did you try and download directly to your computer and run it from there?

  Service pack 1 and service pack 2 Service pack 1 has joined in.

  Here are the links where you can download and install Windows XP SP.

  Service Pack 2: http://www.microsoft.com/en-us/download/details.aspx?id=28

  Service Pack 3: http://www.microsoft.com/en-us/download/details.aspx?id=24

  I hope this helps.

• I downloaded service pack one, but he says that my product key number is wrong.

  I downloaded service pack one, but he says that my product key number is wrong. It is the one that came on the back of my pc seven years ago. Now, I've lost my counter top. any help out there? Thanks I don't know anything about pc, s

  Original title: a vista service pack

  Hello

  How to activate a Microsoft product using Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929/en-us

  When you contact the Center, press any key.  Wait a CSR answer and explain them in detail.

• How can I fix the serial number and the product number in my bios cq61-410us?

  I have a laptop HP 18 months, with Windows 7.  It worked wonderfully in all until he decided a little there is to lose the serial number on the bios information.  Thus, he thinks now that I have a copy of counterfeit Windows.  How can I restore the serial number and product number in the bios information?

  Hello

  The only practical way to achieve this is to contact HP via the corresponding link below and to make arrangements for this information re-tattooed to the bios to a service center authorized.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  Kind regards

  DP - K

• 0x8024400a error code appears, and when I try to download service pack 3, it won't let me.

  0x8024400a error code appears when I try to download updates and says I need service pack 3, and I can't download anyone. So, how = I download?

  Hello

  1. How are you trying to download? You use Windows update, or download the standalone pack?
  2. What is the full error message?
  Method 1:
  Check out the link and follow the steps.
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/836941
  Important This article contains information that shows you how to help lower security settings or how to turn off the security features on a computer. You can make these changes to work around a specific problem. Before you make these changes, we recommend that you evaluate the risks that are associated with the implementation of this workaround in your particular environment. If you implement this work around, take additional measures to protect the computer.
  Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this solution to workaround but are providing this information so that you can implement this workaround at your own discretion solution. Use this workaround at your own risk.
  Method 2:
  Check out the link and follow the steps.
   
  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  OP can refer to the "Troubleshooting Windows XP SP3 installation" section in the article mentioned above for troubleshooting the installation of SP3 issues.

  How to get Windows XP Service Pack 3 (SP3)

  http://support.Microsoft.com/kb/322389