Project/img files created in PS CC will be transferred to Cloud Storage?

Similar Questions

• SMP-N100 will not play VAC/.m4a files from DLNA server but will play them to USB storage device.

  When I try to access my iTunes music files located on my Windows 7 laptop, my Sony SMP-N100 sees files, but the labels 'LCMP', even if these are CCA/.m4a files. When I try to play these music files, Media Player tries to do and eventually times out the claim that the file is corrupt or the wrong format.

  When I copy the music files (and keep the same directory/folder structure) on a key USB a plug in the front USB port on the SMP-N100, Media Player sees thin files and labels like "ACC" and plays perfectly.

  By tables of supported media, published by Sony, VAC/.m4a files are supported USB and DLNA, and yet they do not seem to work on DLNA.

  I use a wireless connection to my network. I have an available Ethernet cable, but when I tried to use it yesterday, I couldn't figure out how to turn off the wireless and I ended up finding duplicates the error messages from my firewall IP. I use ESET Smart Security. I disabled and music play via DLNA with no different results.

  I use Windows Media Player as my DLNA server and I went through all the settings in it. I could be missing something, but I can't find anything that says nothing other than what I have already addressed in the configuration of the Server DLNA WMP.

  I'm willing to try a direct connection between my laptop and the N100 but do not know how I would do. Ethernet? Crossover cable?

  I tried to use the Sony support Chat yesterday but the call ended when I couldn't provide the sampling frequency of the files (they are only supported up to 48 khz). Later, I found that iTunes displays the file sampling rates and mine are all<42>

  Is there anyone here who has any ideas?

  Hello tpcannon.

  AAC files are not compatible for broadcast in the drive via DLNA.

  You can download the manual from the following link:
  http://www.docs.Sony.com/release/SMPN100.PDF

  See page # 26 and 27 of the manual to confirm the same information.

  If my post answered your question, please mark it as an "accepted Solution".

• Ray create the Blu - job will not output a .img file

  iMac 27 inches Core i7 at 3.5 gHz, 16 GB ram, Nvidia GeForce GTX 780 M, 4 GB, 1 TB of storage with +-330 GB free

  MacOs 10.10.5 "Yosemite".

  Final Cut Pro - X 10.2.2

  4.2.2 compressor

  I am producing a Blu - ray .img file, which I already did some time with no problems.  This time, compressor will be released the .ac3 et.264 files, but not the .img file needed.  I have tried both a FCPX 'Send to compressor' and "part in Master file" in ProRes as an interim step, nothing helps.  The project is 2h07m in length and compressor is the calculation of the transmission speed to fit on a single layer BD - R (25 GB) as it should (around 21 Mbit/s on average bitrate).  I use encoding in two passes and maxed out settings.  The original file has chapters.  Code assets out to 21 Go to the fichier.264 and 190 MB for the ac3 file, so everything should be fine.

  The compressor process takes about 7 hours to do and I'm at the third attempt, it's getting old!  I can do a test with a smaller file (to save time) with the same parameters and process, and it will work.

  Any idea?  The last FCPX and MacOS solve this?  I was hoping can project before upgrading the computer.

  Oh dear.  I went to the pane 'Complete' to see if an error could be found but there not, labor was listed as successful.  I tried the 'Reuse' button and restarted the process.  As the coded assets were still on my computer, compressor used as-is without having to restart the whole encoding process.  He proceeded to finish the job of Blu - ray in a few minutes, then displayed the appropriate, .img file which works fine, menu, chapters, and all.

  Of course, I am happy that the work to be done, but I'm not happy with Apple for such bugs.  I do not use Windows for some reason!

• Word 2011 will not open docx file created under Windows

  Word 2011 will not open docx file created under Windows sent me by mail after I installed El captain.

  No problem when I create a new file and re-open it. Can anyone help?

  I don't know that someone on the Microsoft forums can give you some useful tips.

• I can now create a folder that will hold all of my photo files?

  Original title: search folder

  I did a search with the little dog under (music photos or videos).  I have all my photos gathered.  I can now create a folder that will contain all the? I use Microsoft Word or Word Perfect 10, but most of my documents are in WP. I have photo files in Picasa and Photo Shop as well as those of Word Perfect.

   

  Hello

  
  What documents are there in WordPerfect?

  Yes certainly, you can create the folder that holds all of the image files.

  See the following steps to create a folder.

  (a) to highlight all the images files or press Ctrl + A on the keyboard

  (b) go to the location where you want the folder to be (example: Office)

  (c) right-click and click New, and click folder

  (d) the name of your choice.

  (e) open the folder, right click and click on paste.

• Files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are registered as *.ai------.

  I have an older version of Illustrator and you want to upgrade.  My question is: files created with Illustrator CS2 12.0.0 version will be compatible and works with the latest version of Illustrator.  The files are recorded as * .ai?

  That should be no problem.

  Text will be redistributed without doubt if you want to change it.

• Once done your preliminary tests on all files created with muse this corrupt somehow, or will they be OK?

  Once done your preliminary tests on all files created with muse this corrupt somehow, or will they be OK? My company wants to use a product test to determine whether to buy this product for the future. These files created will be able to function properly on the web once my trial? Or it would require buying keep these files up and working properly?

  Hello

  The files are not affected at the end of the Muse. Site will work very well on the web.

  Kind regards

  Aish

• Unable to read file created with Windows Photo Story 3

  Photo Story 3

  I created a story about photo story 3 and saved. However, when you want to read a message reads "a device attached to the system does not work.

  Help - does that mean?

  I created a story about photo story 3 and saved. However, when you want to read a message reads "a device attached to the system does not work.

  Help - does that mean?

  =======================================
  You save it as a project .wp3 file or a .wmv movie file?

  To record a movie .wmv file that should play in Windows
  Media Player... When you are on the last screen that says:
  "what do you do with your story.
  Choose... "Save for playback on your computer..."
  Choose a backup location...
  Left click... 'Next'... one last time and the file video .wmv
  will be returned.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to resize a swf file created in catalyst?

  Hello

  I created a magnificent site to the catalyst. My problem is: I don't know a code to change the size of the swf file created in catalyst.

  The swf file is now 800 x 600, but I want it automatically adapts the browser.

  I already have a swf in Flash Professional CS5, and then import it into Dreamweaver and change to 800 x 600 and 100% x 100%.

  Works fine, but when I do the same with my swf created in Catalyst, is not.

  
  Anyone know how I can fix this problem?

  Thank you
  Matiege

  Hi Matiege,

  What version of CF are you using? The latest version of CF, called 'Panini', supports the constraints, you can run the project, resize the browser and all objects that use constraints will be aligned correctly. Layout object constraints are specified with the so-called "vacuum" when the object is selected. There are also a few options if you right-click on the suction cup. The "Panini" is available for download on http://labs.adobe.com/technologies/flashcatalyst_panini/.

  The old version of the CF supports only the absolute coordinates.

  He answered your question?

  Thank you

  -Mykola
  CF QE

• PSE8 Mac - how to get iPhoto directly in the project Bin files.

  I put iPhoto in place so that when I double click on an item, it opens in PSE8.  The problem is that he appears not only in the sandbox of project it is also on the workspace.  I can't understand how to remove the workspace and simply to the location of the project.  I want to use it for scrapbooking, so it would be unusual for me to have six different images, most other elements of scrapbooking, between what I would need to use and back.

  Earlier today, I asked how do to close an open file (W command) but when I tried the command + W he closed it on my work area AND in the location of the project.

  Several months ago, I took a class, but the teacher was using the PSE for the PC.  She was able to send images directly to the location of the project and raise them (and create layer) as she needed.  There must be a way to do this under Mac.

  Thanks in advance if you can get through this one, I tried to figure this out for hours and hours.

  Click the arrow to the right of the label "project Bin Actions." I have highlighted below with a red arrow.  Select the option 'create '.  You then will be that a single image in the work area - which is exactly what you want.

  Additional pictures will be hidden, but will remain in the project bin.  You can see in the second picture below.

  To move a picture to the image, just click on the image you want in the location of the project.  Elements will switch to the new image and relegate the old photo on the site of the project.

  Note none of the photo changes will be recorded on your hard drive until you say things to do.  Know so that you can spend 20 minutes a picture setting, it rebasculer swinging back to the location of the project, begins to work on another image - and have things crash.  All of your edits on images then will be lost, because no photos updated have been recorded to your hard drive.

  I'm paranoid, so I save each picture before I started working on a second photo.

  

  

• "file &gt; create new version" missing in the latest update to iTunes

  I used to use the Menu command file > create new version to convert the movies so that they will play on my 1st gen iPad. (The fact that he made them smaller was an added bonus).

  This function seems to be missing or moved in the last update. In its place is a Spartan function convert . If you hold down the option key, you can select «Convert to AAC...» ' which is useful in its own way, but what I'm looking for.

  Does anyone have an idea where the conversion of film went?

  Apple dropped this feature in the last update, because they think classic iPod is obsolete. But you can use the Handbrake or Apple Compressor to do the same job and then mark the files using MetaX or MetaZ, works for my 8th generation iPod classic.

• Printing file"creates the *.pm file I can't open

  I've never been able to reopen a .pm file created when I click on "Print to file" in the print screen and save to my desktop.

  When you click on it it asks you what program you want to use to open it, but none of the choices, they give you in the drop-down list works.

  This has never worked on any version of windows or PC so I wonder if the command 'print to file' Microsoft is worth nothing.

  If you have a printer called Microsoft xps document writer, then you can send your document to it and it will print to file, i.e. filename.xps

   

  then all you need is an xps Viewer to see the print job.

   

  Here's more info:

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/print-to-the-Microsoft-XPS-document-writer

  
  --
  DB·´¯'·.. ¸ ><)))º> --> sent via windows live mail

  .

  "annoyedjoe" wrote in message news: 64 a 72473-9 d 49-46ab-9932-80e56766c636...

  I've never been able to reopen a .pm file created when I click on "Print to file" in the print screen and save to my desktop.

  When you click on it it asks you what program you want to use to open it, but none of the choices, they give you in the drop-down list works.

  This has never worked on any version of windows or PC so I wonder if the command 'print to file' Microsoft is worth nothing.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• Copy the files created after a certain date

  How can I copy files that were created after a certain date?

  Thank you

  Hello

  Start - computer or Windows Explorer, you can navigate to a specific folder, then right-click on
  name (or) control position - MORE - Date created column - OK - the box, and then click the Date
  Created column that will align the content of the folder by date ascending or descending as you wish
  (click again to change the order). Then you can click on the 1st file in a sequence and hold SHIFT key and
  Click on the last file in the sequence you want - this will highlight the sequence - then right-click -.
  where in the region of high-lighted and the COPY - navigate to where you want to copy and then right-click
  on paste. To copy a group of files not in a sequence, hold down the CTRL key and click on the ones you want
  COPY that will highlight the files - right-click anywhere in the region high-lit - and then COPY
  Navigate to where you want to copy and click straight on and PASTE.

  --------------------------------

  You can search for files created after a certain date.

  Tips for finding files
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-finding-files

  How to use advanced search in Vista Options
  http://www.Vistax64.com/tutorials/75451-advanced-search.html

  ----------------------------------------------------------

  Win Key F opens advanced search

  Searching in Windows Vista, part 1
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-1-secrets-of-the-search-box

  Part 2
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-2-Start-menu-and-control-panel-search-tips

  Part 3
  http://Windows.Microsoft.com/en-us/Windows-Vista/searching-in-Windows-Vista-part-3-using-advanced-search-for-those-hard-to-find-files

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• ROBOCOPY can move files created yesterday to the target files and keep the folder tree and datetime attributes

  I want to create a script to move the files created in the day before in a file archive (and subfolders) into a new target folder daily.  For example, whenever I run the below script 10/02/2015, I would move files created on 01/10/2015 and earlier source archives files to the destination folders, with the same folder structure and datetime preserved.  This is my 1st ROBOCOPY command in the script.

  % VarSourceArchives % varTargetArchivesFolder % Robocopy / MIR / COPYALL / DCOPY:T / MOV / MINING: 1

  However, it doesn't move the files of more than 24 hours from when I run the script, rather than all the files created yesterday. Technically, he did what has been said, but not exactly I want.  It seems if you use /COPYALL switch, the switch / MINING: N compare file date & time stamp as file age exclusion, rather than just the number of exclusion of age days.

  How can I achieve my goal to move files from a specified number of days while preserving the postmark date & time of folders and files?  Are there different ROBOCOPY switches to set, or if it is complex date and the calculation of leap year?

  Thank you

  Michael J.

  Robocopy is a bit lacking in this regard. You can use the hybrid batch file below to reach your goal. Sets the attribute archive every file that was modified yesterday and it resets any other file attribute so that robocopy will only move the files of yesterday.

  off @echo
  Set Source = folder Temp D:\My
  the target folder = target value M:\My

  Set Scr="%temp%\TempVBS.vbs".
  (echo sPath = 'Source %'
  echo Set OFSO = CreateObject("Scripting.Filesystemobject"^)
  echo sYesterday = FormatDateTime (DateAdd ("d", Now (^),-1 ^), 2 ^)
  echo process feldspar
  echo Process(sP^) Sub
  ECHO for each represented in oFSO.GetFolder(sp^). Files
  FormatDateTime(oFile.DateLastModified,2^) if echo = _ sYesterday
  the echo then oFile.Attributes = 32 _
  echo oFile.Attributes = 0 Else
  Following the echo
  ECHO for each older in oFSO.GetFolder(sP^). Subfolders
  echo process oFolder.Path
  Following the echo
  echo End Sub) > Scr %
  cscript //nologo % VCC
  del % VCC
  Robocopy /a /s /mov 'Source %' 'target percent '.

• If I create a restore disc, will be if give me a copy of my registration, profiles, retore point, etc?

  Original title:

  Backup files

  I had a problem connecting with my profile today, get it fixed. It made me think what are important files which should I back up? If I create a restore disc, will be if give me a copy of my registration, profiles, retore point, etc? I looked online and found information about creating a backup, but lets say a windows file gets corrupted, or my user account, etc. Is there a way I can get this saved?

  My data is backed up using Mozy, so I'm not worried about the loss of data. Want just a way to easily get Windows operational return. Thank you.

  Hello

  BTW, you can use the system restore which records these parameters (and register):

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ===================

  A utility to help you.

  ShadowExplorer - free - allows you to browse the shadow copies created by windows
  Vista/7 Volume Shadow Copy Service. It is specially thought for users of the Home editions,
  who have not access to the default shadow copy, but it is also useful for users of the
  other editions.
  http://www.ShadowExplorer.com/

  Rob - SpiritX