Project settings of the AVCHD for a better quality of DVD

Similar Questions

• How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  How to access my settings of the webcam for an hp pavilion windows vista any help would be appreciated

  See if a program was installed for him. Or use something like Skype / instant messaging program

• How can I fix the gap between the default project settings and the music video

  I'm building a DVD in yet CS6, and some of the images you want to fragile/wobbly preview and after that I have burn to disc.  I think it's because the images were shot at 24 fps, progressive and native transcoding for standard def DVD settings are 30 frames per second, interlaced scanning speed.

  I could not change the default conversion settings, and research online, I did, it seems that those who are set in stone. I was able to modify the project settings to export a lot of my images, but it did not help the problem. Nor do transcoding the video clip.

  The project was originally shot on two cameras - a Canon 5 d Mark iii and a Panasonic GH2. Images of Canon has no problem. Only the GH2 images seems wobbly preview and make. I edited the video file in Adobe Premiere Pro CS6, and then exported to MPEG to DVD at 24 p, set NTSC high quality large screen. Any ideas on how to solve this problem?

  Editing mode: QuickTime DV NTSC

  There is your problem.

• settings on the router for ITouch

  I have tried to connect my new ITouch with my home wireless, but will have many problems.  It does not accept the password.  I read some of the discussions, but there are so many things listed there.  Right now my router, a WRT54G, is defined as 64-bit WEP with a code.  What I read, I should change to a 128 bit and generate a key code for this.  If I do that, should I do something different for my laptop, which work very well with the wireless?  I won't spoil things, I'm not use to treat the router settings, etc..

  If you change the 64 to 128-bit WEP encryption, generate the password for you and use the 1 KEY to reconnect to the network wirelessly on your laptop.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER... Let the empty user name & password use admin lowercase...

  Click the Wireless tab, click the wireless tab, the value of the 11-2, 462 GHz wireless channel, provide the unique SSID for the Name (not linksys) wireless network... and click on save settings. Click on wireless settings, advanced, change the tag to 75 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 > click 'save settings '...

  Now try to connect the i-Phone and check...

• Settings of the AFN for a direct TCP (3G v.s. GPRS) connection

  Today, I read a lot of articles about the transportation options for the Blackberry network.

  I installed the Tool of Network Diagnostics on my device (BlackBerry 9300 v5.0).

  I'm Tournai on "Mobile network" and disabled the "WiFi". Therefore, my device must use the direct TCP (HTTP protocol) only.

  According to this article, for a cell TCP connection, we need to set up the APN settings, otherwise we will have 'Tunnel failed' error

  http://docs.BlackBerry.com/en/developers/deliverables/21128/Network_transport_options_1293321_11.jsp

  However, without specifying the AFN, I was still able to have labour Direct TCP (HTTP).

  I'm in New Zealand, I tested the Network Diagnostic tool with 2 dgree and vodafone sim cards. Two of them work properly. Two of them are 3 G networks

  However, a lot of people on the internet saying that if they do not specify the APN for GPRS or EDGE networks, they would get the error "failure of Tunnel.

  So, I had the impression that with 3G networks, don't need us to specify the APN.

  I don't know if that's okay?

  One of the really annoying things on the treatment on the Blackberry network is its inconsistency.  I think you've hit one of them.  I saw this in the past with Vodafone, I wasn't sure that this has happened with other networks but maybe so.

  The inconsistency is the following.

  If your connection URL looks like

  http://...; deviceside = true

  If you think that this will force the connection to use the carrier TCP aka Direct TCP.  However, on some phones of brands, including Vodafone, is not correct.  On these phones a connection as it goes actually on WAP.

  To force the direct TCP, you must follow the instructions in this post:

  http://supportforums.BlackBerry.com/T5/Java-development/Vodafone-UK-direct-TCP/m-p/463081#M92387

• How can I change the settings of the clock for Trinidad and Tobago

  My computer clock has changed, but I can't seem to stay on the exact time of Trinidad and Tobago and does not change to or from daylight saving time. The climate is tropical and our time never changes, but the computer changes, so I want to stop time to change.

  Uncheck you automatically adjust the clock for daylight saving time in the time zone settings?

• The difference between the project settings and the settings of the sequence?

  As the title says, I don't understand why we have to select project settings when you create a new project. If a project can contain different sequences severel with different parameters, is it really important what are the parameters of the project?

  When you create a new project, you are presented with a menu of

  the sequence (not the project settings), to choose settings.

  You can skip this step by pressing "Cancel", then import your media

  and create the type of sequence that best adapts to your images.

  A single project can contain any number of different sequence types.

• How can I reset the default settings of the monitor for Vista

  Somehow, I ended up setting my screen laptop like I have look on the side for one of the two users on the PC.  The other user is fine.  Any ideas on how I can reset the default to display monitor?

  Try holding CTRL + ALT + UP arrow at the same time. You can also try the other arrows. I hope I could help

• How to change the existing settings of the source for the container system

  Hello
  
  Cannot change settings in the system container (Oracle 11.5.10) source source.
  
  Please guide me how to change the settings.
  
  Thank you and best regards,
  Partha.

  Partha, you should not change the current container. Create a new container by copying the existing container and make any changes required in the present.

• Aurora-R4, seeking to upgrade power supply for a better quality of power supply that is not a brand of Dell?

  OK, I have a R4 Aurora, and in my view, that it comes with a power supply of 875 watt. Not 100% about this though. For now, I want to upgrade the power supply to a power supply, so it can support say double cards video in better quality SLI mode. The problem is that the PSU 875 does not have a rail system unique to 12 volts to 50 amps of power support to handle difficult loads of power and provide ample cooling in the power supply. What I would do in the future, it is out of the current PSU, I now and looking to buy a decent POWER supply unit elsewhere. Reference Dell sells a power supply higher than I can use existing wiring, or should I find another brand of PSU and seek to replace the power wiring? And how is it difficult to install if I have to use a different power supply with a different wiring? Installation instructions?

  2015 edit: Joe got his Alien running on an XFX Pro1250 you read, while the mine is running on the twin PSU Seasonic x 1250, here with a case modded haress:

  • The ALX files: a triad of power exchanges. Area-51 Aurora XPS 730 x... How to make a R1.44 of Area 51, using the value of r2 New 1440w Delta... Lessons in exchanging PSU Done Right
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19618380

  I typed my answers below Joe right B4 my Alien arrived last fall & b4 I got much Aurora psu swap knowledge or experience; What follows is an IdeaStorm on how to game-plan & handle swap psu Aurora, with a forum for archives where last year not too many messages in-depth existed on the subject, & Joe here desktop & my own experience of swap, details surface as others have done swaps using the accumulated knowledge we all collection / post in our success stories.

• Dell order | Configure not applying is not the settings of the BIOS for Inspiron 13 7000 series

  I tried to define a system and/or a password via the command line and a package .exe or CCTK file via the export of GUI and none of these work for me.

  The following text appears in the log:

  Option: setuppwd

  2014/11/12-11:02:14 cctk - error in the definition of value.
  Note: In some machines, Hdd if password or system password is set, you cannot set the password.

  2014/11/12-11:02:14 cctk-
  Option: syspwd

  2014/11/12-11:02:14 cctk - error in the definition of value.

  I tried this on a Windows 8.1 system and for S & G, on a Windows 10 system with the same result.  I even tried to create the 2.2 CCTK config and have the same result.

  What is the cause?

  Hi CAPP3R,

  DCC (CCTK) deals with the BIOS settings only for Dell commercial client systems. CDC is not yet supported on all Inspiron models.

  Kind regards
  Karthik.C

• What is the best setting for a better quality of shades?

  Hello!

  I would like to know what are the best codec and the best setting for a video with 1920 x 1080 resolution.

  I tried everything but nothing because the shadows... are not the nuances.

  I want a video which is like a video not compressed, but lighter. Same quality, same shades.

  I tried with Canopus Lossless but the video is dark and huge (7 min to > 17 GB),

  then with Canopus HQ, even of quality but a little more light (6 GB),

  I tried with all settings and codecs, but I have not found what I want.

  Who can help me for the best settings for the best colors?

  Thank you very much.

  PS: Sorry for my English!

  If you want to download the video on YouTube, use the YouTube encoding presets into Adobe Media Encoder.

• Cannot open the project; Cannot find the folder for this project

  I have Encore CS4 and when I opened it, I clicked on "Create a new project" and he chose my office as the location target. Then when I click on the file from my desktop or reminder, I get the following message appears: "unable to open the project; This project file was not found. But the folder and the file exist. The file extension is .ncor what I am doing wrong?

  Still worked for you before?

  If so, what has changed?

  If not, you run as administrator?

• Windows 8, cannot get the display settings and the password for work

  I tried to change the timming 'turn off display' and "ask password on wake up" (fixed or not) to perform settings.  Whenever I stop using the computer a few seconds later, he goes to the locked screen.  The computer was a display at Costco, so maybe they had set it up so that people can not change the settings...

  My problem has been resolved by the activation of the screen saver after minutes 356789

• Need help with the settings of the firewall for Firefox

  My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

  Hi Tara,

  You can check the link and follow the steps and check if this may help;

  Configure the firewall so that Firefox can access the Internet

  http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

  Is has problems, I suggest you to contact the Mozilla Firefox support,.

  http://support.Mozilla.org/en-us/products/Firefox

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.