Projector problems with Mac OS 10.4...
I use Director MX 2004 10.1.When I create a projector to be used in a Macintosh Kiosksystem, it works up to Mac OS 10.3.9 perfekt. On Mac OS 10.4... I have the following problem: the computer restarts in the morning, but the title bar and the "Dock" do not disappear and the projector is not running (she waits on the first image, until someone clicks in the Screencenter). It of fatal, because any user comes to the backgroundfiles and can destroy things! I tried different projektorsettings with no result.
Can anyone help?
Thank you very much!
The trick with the "Kiosk" account made a lot of gain!
The 'Start Up' points, it was like that: there has been no other programms or items in the list. The projector has been the only one. But then I tried to put a text file to the list and it worked. In the boot sequence first the text file will be opened and then the projector. And it works. I Don t know why but it works.
I'll continue searching in the forums of OS X Tiger to find the perfect solution, but the booth is running and everyone is happy. Once again thank you very much!
Tags: Director
Similar Questions
-
Problem with MAC pinning and new VLAN
[Cross Announces nexus 1000V and forums of the UCS]
Hi all, I have a working of the UCS 1.4 configuration (3i) and the Nexus 1000V 1.4 and according to best practices guide uses "channel-group auto on mac - pinning mode" on the uplink of Nexus. I have a problem when you add a new VLAN in this environment, and it is a reproducible problem in two different facilities.
I pass by the VLAN usual creation process on the Nexus, the network upstream and within the UCS himself. I create new port vethernet profile and set it as an access port in the new VIRTUAL LAN. However when I join a VM (existing or new) to this new port vethernet profile in vCentre virtual machine cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto on mac - pinning mode', the virtual machine will start instantly talk to the outside world and the new VIRTUAL LAN is running. Can I turn MAC pinning back once again, and everything continues to work.
So the question is, is this normal or is there a problem? MAC the Θtiquetage has a brief interruption of the uplink, so is not a viable long-term customer solution when they want to add new VLAN. Is it possible to add new VLANS in this scenario without any unavailability of the network, but brief?
Thank you
Close the loop on this. You tap the CSCto00715bug.
Symptom: New MAC address is not learn on vem in the l2 table even though the mac address table is not overflow yet. vemcmd show l2-emergency-aging-stats | grep "Number of entries that could not be inserted:" will show extreme large number. Conditions: Nexus1000v VEM running on SV1.4 release. There are two CPU cores on the host. This issue may happen at race condition. Workaround: Reboot the ESX/ESXi host.
This problem is corrected in the 1. 4A release.
Kind regards
Robert
-
problem with mac osx el capitan bluetooth
Hello
I have a problem with bluetooth (macosx el capitan) and my mobile samsung Notes 4
I can't receive my photos
Why?
before I was using Snow Leopard and it work properly...
Try this first:
Remove the two devices the BT settings on both devices.
Then pair them up again.
-
help-problems with Mac book since the upgrade to Yosemite
I have a 13 "Macbook, end of 2010. It is used to run perfectly until I installed Yosemite in late 2014 when he started to run slowly and Safari would crash. The problems have got worse with each update. Now when I boot, I get a white screen with a progress downstairs bar and it may take between 1-3 minutes before I get the logon screen. Programs also take a long time to load and I constantly get the rotation beach ball. I don't have any external hardware attached and am does not have any software that needs to use a lot of RAM. I ran an EtreCheck - results below. Can someone help me understand?
EtreCheck version: 2.9.11 (264)
Report generated 2016-04-14 19:23:39
Download EtreCheck from https://etrecheck.com
Time 06:25
Performance: Below average
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Another problem
Description:
System is slow to start up and constantly get the spinning beachball.
MacBook (13-inch, mid 2010)
[Data sheet] - [User Guide] - [warranty & Service]
MacBook - model: MacBook7, 1
1 2.4 GHz Intel Core 2 Duo CPU: 2 strands
2 GB RAM - Insufficient RAM! Extensible - [Instructions]
BANK 0/DIMM0
ok 1 GB DDR3 1067 MHz
BANK 1/DIMM0
ok 1 GB DDR3 1067 MHz
Bluetooth: Old - transfer/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 770
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
OS X Yosemite 10.10.5 (14F1713) - since the start-up time: 13 hours
TOSHIBA MK3255GSXF disk0: (320,07 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
Macintosh HD (disk 1) /: 318,88 (Go 256,24 free)
Storage of carrots: disk0s2 319.21 GB Online
OPTIARC DVD RW AD - 5970H)
Built-in ISight from Apple Inc..
Apple Inc. BRCM2070 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. Apple keyboard / Trackpad
Mac App Store and identified developers
[loaded] 5 tasks of Apple
[loading] 147 tasks Apple
[operation] 49 tasks Apple
[killed] 11 tasks Apple
11 killed process lack of RAM
[loaded] 47 tasks Apple
[loading] 135 tasks Apple
[operation] 74 tasks Apple
[killed] 6 tasks Apple
6 killed process lack of RAM
[loading] com.hp.help.tocgenerator.plist (2009-07-28) [Support]
[operation] com.trusteer.rapport.rapportd.plist (2016-03-19) [Support]
[loading] com.adobe.fpsaud.plist (2016-04-05) [Support]
[loading] com.microsoft.office.licensingV2.helper.plist (2016-01-09) [Support]
[operation] com.trusteer.rooks.rooksd.plist (2016-03-19) [Support]
[failure] com.amazon.cloud - player.plist (2014-06-07) [Support]
[operation] com.amazon.music.plist (2015-12-29) [Support]
[out] [email protected]
[ongoing] com.etresoft.EtreCheck.127548
[loading] 364 tasks Apple
[operation] 143 tasks Apple
[killed] 16 tasks Apple
FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-08) [Support]
QuickTime Plugin: 7.7.3 (2016-03-30)
NP_2020Player_IKEA: 5.0.94.0 - SDK 10.6 (2011-10-26) [Support]
Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-08) [Support]
Default browser: 600 - SDK 10.10 (2015-09-24)
Silverlight: 5.1.41105.0 - SDK 10.6 (2016-01-23) [Support]
iPhotoPhotocast: 7.0 - 10.7 SDK (2012-04-05)
AdBlock - BetaFish, Inc. - https://getadblock.com (2015-09-26)
Add to wishlist Amazon - Amazon.com - https://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2014-06-26)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2014-06-26)
Add to wishlist Amazon - Amazon.com - https://www.amazon.com/wishlist?ref=cm_wl_saf_ext (2014-06-26)
PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-02)
Flash Player (2016-04-05) [Support]
Trusteer Endpoint Protection (2016-03-28) [Support]
Time Machine not configured!
kernel_task 17%
8% WindowServer
3% ScreenSaverEngine
PS 1%
0% fontd
Top of page process of memory: ⓘ
349 MB kernel_task
96 MB mdworker (5)
Safari 94 MB
Com.apple.WebKit.WebContent (2) 92 MB
45Mo mail
99 MB free RAM
1.90 used GB RAM (213 MB Cache)
482 MB used Swap
April 14, 2016, 18:53:37 /Library/Logs/DiagnosticReports/rapportd_2016-04-14-185337_[redacted].cpu_resou rce.diag [details]
/Library/rapport/*/rapportd.app/Contents/MacOS/rapportd
April 14, 2016, 06:01:32 self-test - spent
April 13, 2016, 21:13:29 ~/Library/Logs/DiagnosticReports/Activity Monitor_2016-04-13-211329_ [redacted] .crash
com.apple.ActivityMonitor - Applications/Utilities/Activity Monitor Monitor.app/Contents/MacOS/Activity
April 13, 2016, 18:43:44 /Library/Logs/DiagnosticReports/Safari_2016-04-13-184344_[redacted].hang
/Applications/Safari.app/Contents/MacOS/Safari
You need more RAM. Note related errors in red. According to my information, you can install:
Maximum memory 16 GB (actual) 4 GB (Apple) Memory locations 2-204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM -
STORE. E TV - problems with Mac and NTFS
Hello
yesterday I bought the Toshiba Multimedia Stor.e TV with 500 GB HDD.
Packed, placed some data from my iMac on the HARD drive, it connected to my TV---> nothing works, the example of the files that were already on the work of HARD drive, won't my files.
I thought of a few reasons and tried somethings out, the result: MAC metadata are the problem. The HARD drive got NTFS (which I also want to use in the future) and on Mac I use MacFuse to manage NTFS---> Far now without any problem, but somehow Stor.E tv will play all files that I have some Mac inside metadata.
So, I copy the files from the disk on a Windows PC, just copy it to the Stor.e. ---> No fun at all
ist ther ecoffet another solution? As an update of firmware that makes the Stor.e able to manage files Mac or an app that kan remove metadata files Mac?
Sincerely Christian.abbel
SRY for my bad English, I'm not used to use English
Hello Christian,.
The Toshiba HDD Multimedia Stor.e TV supports only MPEG-1/2/4, DAT, VOB, MP4, AVI, XVID and MJPEG files.
If you want to use another type of file, you must convert in one of the supported file types.The TV Stro.e was not developed to play files metadata of Mac and it s so not able to read them.
So unfortunately, it cannot update any firmware released for this.You copy the files to a Windows PC or you convert to one of the supported format.
Sorry for no better news but that s with the specifications of the TV Stor.e.
Best regards
-
Unable to follow the message (with or without attachments) in mac mail... sometimes restarting the computer solves the problem, but not always and the new problem occurs a few hours after the reboot if in fact, rebooting fixes problem.
The office is a Mac from early 2009 with 8 G of ram and only 30% use hard disk
It is a new problem in recent weeks without changing the configuration.
Any ideas?
Thank you, Mark
First check to see if there is nothing changed, if there is then reverse the trend.
If this isn't the case, then reset the SMC and the PRAM by Intel iMac SMC resets and PRAM , and post back with your results.
-
Printing problems with MAC OS x 10.7
I have a new MAC with LION installed and I got a curious experience involved printing with both my HP printers: CM1312nfi and C1120n.
In the first instance, after one by one by apple-store settings, printers worked, after a few days, they could be detected, but print gave an error.
After the call apple and all they suggested (reset print and adding them again, either via USB to wifi) tried nothing has changed.
A few days later I tried the steps suggested and got a new behavior: a software download.
But at the end of the download and installation, the following message appears:
"the software for printing has been installed correctly. Please reinstall the software from the manufacturer. »My printers are currently supported by the LION, but the problem is that HP has NOT not any software for any of them to download from the report:
"With the release of OS X 10.7 Lion, HP provides software and updated printer drivers." These updates are available via Apple software updates in Mac OS X."
My questions are:
How to get a driver to work for them?
Will I update the firmware?
Maybe 10.6 against pilot would be nice as well? If so, where to download?Hello
Normally, the software must be downloaded on Apple software update exectly.
With the help of a software package intended for other operating system is not recommended, may not work and may affect the performance of your Mac as well.
Let's try the following steps:
First, enter the printer preferences > print & scan, right click in the background printers area and reset the system of printong once more.
Launch Applications > utilities > disk utility, select your operating system to partition and click the repair disk permissions button located under the first aid tab, in order to be sure, there are not any permissions issue that caused the failure of the software update.
Download and install the full package of HP printer software 2.7, the installation contains all the HP drivers available by Apple Software Update:
http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg
Enter once more printing & scanning, click the sign more, add the HP Color LaserJet CM1312 MFP Series , and then try to print.
On the C1120n model you mentioned, could you please specify the exact model?
Looking for HP and google I could not locate this model for any printer series.
Just trying to add the printer as for the CM1312, hoewever please specify model correct you, we will be that there is no comprehensive software available for the specific model.
Please let me know any progress
Jean-François
-
Problems with MAC WET11 cloning features
Hello
I'm having a devil of a time to set up my v2 WET11 to allow my XBOX be fully connected. I can configure and connect the bridge, ping, ftp files to XBOX etc. Only problem is when I try to play bound. I can see the game in progress on the second XBOX but cannot participate. Related game works perfectly when Xbox is wired to the router. I know that play bound depends on each game console broadcasting their MAC, so I need to clone the MAC address of the XBOX to use the bridge.
Unfortunately the WET11 web configuration interface I cannot do. Under Settings/Advanced cloning Mode, all controls are disabled - greyed. This includes the control that allows you to turn on cloning. I took a shot the script behind the page and it seems that it checks to see if 'disable cloning' is selected and if so, disables all controls of cloning, including one that would allow me to get back on. Since the default value is disabled, it is the programmatic equivalent to lock the keys in the car. You can take a look at here emulated interface:
http://UI.Linksys.com/files/WET11/v2/advanced.html
Of course, the demo is fully functional and do not exhibit the problem...
Many people have described solve their XBOX related play questions by cloning the MAC address of the XBOX and see change settings using the web interface.
I tried different versions of the firmware 2.06 and 2.07, 2.08 USA 2.08 EU. Same results. Tried the Installer Wizard 1.06 worm, but he does not even include the MAC settings.
Had two cats different with online support agents and the two seem as puzzled as I am.
Am I missing something obvious? Depends on the availability of cloning parameters options elsewhere in the config utility? Is the interface designed for cloning taking place without intervention of the user on the v2 and v1? (doubt)
Has anyone else seen elsewhere?
I know that people have written code to pull the strings of parameters off the unit then maybe the reverse is true and I can write the script to directly change the settings.
Any suggestion would be appreciated.
Rick
Well well well - apparently the firmware is not totally compatible with IE7. Downloaded Firefox and the interface works as advertised.
Rick
-
Problems with Mac OS 10.5.8 and HP 2355xi PSX
My HP PSC 2355xi worked fine when I had a Windows PC. Since obtaining the Macbook Pro, I've tried several times to download the printer drivers for Mac on the site of HP without good results. I usually drop and uninstall.
Yet once, I tried to download the printer driver to 2355 for my Mac OS from the HP website. I've never been able complete the installation because the error of "trap monitor" lights up and installation closes. I have all my updates installed Apple. My printer will print and copy but it will not scan. However, the real problems are the constant error messages.) Every ~ 45 seconds, I get the trap monitor error message and I have to click on one of the 3 choices to get rid of it. I tried all 3 choices, nothing is done.
'The monitor application trap HPIO close unexpectedly. Mac OS and other applications are not affected. Click on restart to start the application. Click report to see more details or send a report to Apple. "Or I can click on ignore.
I also have this error with less frequency.
"An item in the folder Startup Items (Library/StartUpItems? HP IO) doesn't have the proper security settings. Using this object can cause problems. If you have confidence at that point fixed securitys settings, click on fix. So always that this point be used, click on disable. "Stop using this object and show this message again, click on decide later.
I looked and did not have a Library/StartUpItems. I tried to fix the last time I installed and it did not work. I clicked on decide later on this installation, but I'm afraid to click on disable.
It is not worth dealing with error messages ever minute or less in order to have this printer. It's all just too old and not scan with a Mac OS?
Trust me.
-
Problem with Mac OSX 10.7.5 Scan HP1536dnf
I just installed the driver download HP online for my Mac (Mac OS x 10.7) and the subject of HP 1536dnf MFP; When you try to use the function HP1536dnf Scan of my MacBookPro; I get the following message:
192.168.0.6 is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image. I have check the router and Mac configurations without solving the problem.
My MacBook Pro is connected to a cable Modem wireless Motorola & Gigabit Router (model SGB6680) via a wireless link, and the HP1536dnf is connect through the router Motorola (192.168.0.6) Lan connection.
NOTE: I am able to print to the HP1536dnf of the Mac, but I am not in a position to operate the scan function wirhout to get the above message. This brings me to understand the Mac connection to the router and the local network of the HP1536dnf works correctly.
Please suggest items to check or a solution for my problem. Thank you!
Hello Ray1536dnf,
Thanks for the post. With this scanning is a process more complex printing we can have some other issue here. I might suggest to take a look at the below document specifically solution 3, assign a static IP address. Good luck!
-
PES 10 install problem with Mac OS 10.6.8
Hello
I have trouble to install a copy of the PES 10 on a Macbook Pro (Intel 2 .4GHz) with the Mac OS X 10.6.8 version. I tried downloading the software two times and get errors on two copies. This is the last error:
Exit code: 7
-------------------------------------- Summary --------------------------------------
-0 fatal Error (s), 23 (s), 3 WARNING (s)
WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Installer_6.4_AdobeCameraRawProfile6.0All camera profiles 6.4.0.0 are uninstalled now.
WARNING: DW031: payload: camera profiles Installer 6.0.0.0 {3F023875-4A52-4605-9DB6-A88D4A813E8D} has been updated and has been selected for repair. The patch {FEA75AFB-4905-43BB-B1D5-5B44D681BFE7} Installer_6.4_AdobeCameraRawProfile6.0All camera profiles 6.4.0.0 are uninstalled now.
-Payload: {60CB5C6D-5B99-45D3-BAB5-E7728182101E} Adobe Photoshop Elements 10 10.0.0.0.
ERROR: DF027: unable to copy the file from "Photoshop éléments Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf /private/tmp/.tempdirJZhvRqio/Assets1/Adobe" to "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements Editor.app/Contents/Required/PDFL/Fonts/AdobeMingStd-Light.otf" error 0 (Seq 1343)
ERROR: DW063: ARKCopyFileCommand of command failed. SEQ (1343)
ERROR: DF037: unable to delete the directory "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements Editor.app/Contents/Required/PDFL/Fonts"(Seq 1332).
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq (1332)
ERROR: DF037: unable to delete the directory "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements Editor.app/Contents/Required/PDFL"(Seq 1152).
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq 1152)
ERROR: DF037: unable to delete the directory "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements Editor.app/Contents/Required"(Seq 1098).
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq 1098)
ERROR: DF023: cannot delete the file "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements Editor.app/Contents/Info.plist. Error 0 Seq (2)
ERROR: DW063: error to reverse the order ARKCopyFileCommand (Seq 2)
ERROR: DF001: could not get the permissions to "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements Editor.app / happy"(Seq 2) ".
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq 2)
ERROR: DF001: could not get the permissions to "/ Applications/Adobe Photoshop Elements 10 / Support Files/Adobe Photoshop elements"(Seq 2) Editor.app "»
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq 2)
ERROR: DF001: could not get the permissions of "/ Applications / Adobe Photoshop Elements 10/taking care of files"(Seq 2) ".
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq 2)
ERROR: DF015: cannot delete the symlink "/ Applications / Adobe Photoshop Elements 10/Adobe Photoshop Elements 10"(Seq 1) ".
ERROR: DW063: error to reverse the order ARKCopySymlinkCommand (Seq 1)
ERROR: DF001: could not get the permissions to "/ Applications/Adobe Photoshop Elements 10"(Seq 1) ".
ERROR: DW063: error to reverse the order ARKCreateDirectoryCommand (Seq 1)
WARNING: DW036: payload cannot be installed due to the failure of the operation dependent
ERROR: DW050: the following payload errors were found during the installation:
ERROR: DW050:-Adobe Photoshop Elements 10: due to a lack of Language Pack installation
ERROR: DW050:-Adobe Photoshop Elements 10_AdobePhotoshopElements10_en_US: installation failed
-------------------------------------------------------------------------------------
The second version made further than the first on installation. He makes the installation of PES 10 and then jump 60%, installed on 98% and displays the above message. It gets really frustrating because it takes me several hours to download a copy of this software.
Any advice would be greatly appreciated.
Well, I got with success through the installation. This is how I work:
I noticed on my previous 3 download and installation attempts that I was getting the error checking when you try to open the dmg file. I had been disable checking checksum through disk utility > Preferences menu. Each downloaded dmg file would give slightly different mistakes, so this lead me to believe that the problem was with the download. I had been downloading at home and I noticed that it took 4-8 hours to download the file of 2 GB. I think my ISP limiting my connection to preserve bandwidth for others. I decided this morning to download the file in another place with a much faster internet connection. The download took 14 minutes. No checksum error came when you open the dmg file and the installation went perfectly. If others have problems similar to mine, I recommend finding a place with a better internet connection to download the dmg file and see how it works.
-
Digitization of C6180 problem with Mac & Lion
I have a macbook pro with lion installed. I have a hp c6180 all-in-one. It prints, but will not scan. This message appears: error: Sorry, scanner could not be initialized. Scanner not found. What can I do to fix this?
Was the HP software on your Mac before moving on to Lion? How is the printer connected? If by make sure you USB, it does not via a USB hub.
-
Printing problems with MAC OSX 10.7.5 C4795
Hello
I have a HP Photosmart C4795. This is on a MAC with os x 10.7.5.
I have installed the printer when we bought the MAC 2 years and it worked like a charm. It is connected with a USB cable.
Then only, it has stopped working and jobs would sit in the queue for hours before finally printed. I often get an additional page with a bunch of strange and put symbols discarded after the task is completed.
I uninstalled and found the drivers reinstalled and updated a few months ago and it worked like a charm!
Last night I tried to print homework of my son, and then he stuck. I uninstalled again and reinstalled without success. I rebooted the power as well. Unplugged the USB cord but everything just sits and the queue, said that he sends to the device.
I checked and there is no new drivers since 12/15/11. I have those.
HELP Please and thank you! I need to get this figured out so my son can print projects.
Uh oh, that's no good!
Let's rub the current installation of driver and install a new driver.
-------1) click on the menu go to (menu in the bar at the top of the page)
(2) select Applications
(3) select the Hewlett-Packard folder
(4) to select the program to uninstall HP
(5) click on continue
(6) select the printer. Press and hold the keys Ctrl + Options + order of the keyboard at the same time.
(7) click on uninstall
(8) you will get a pop-up window - "Are you sure want to uninstall all the HP software"
9) click OK to continue
(10) restart your Mac
-------
Go ahead and then download the drivers are here
After installation, you should be all good
-
I've been good CS5 (and also have CS6) who has been registered to Windows used to install on my Mac OS... tackle anyone?
Creative Suite serial numbers are platform specific. Windows serial numbers does not work on Mac and vice versa.
The gift is CS5 Windows (full version) and you already own CS6 Windows (full version)?
In this case, the only thing you can do with CS5 is installed on another Windows machine or pay level to CS6 for Mac (and get a Mac serial number), and then install it on your Mac...
-
What is the problem with Mac Companion?
I use a Mac Pro mid-2012. run OS X 10.9.5 Mavericks; and I have an external 'Mac Companion'. Having an 'alias' of my Mac on my Dock mate; the alias used to look like what is included in pic 1:
But since I've updated the "Security Update 2016-001", 26 January 2016, whenever I go to click on my Mac Companion alias, I get what is shown on photo 2:
And when I click on it I get the window, not Mac Companion. I tried the following hotfixes:
1. I have stop the computer then reconnected my Mac companion; but when I restarted the above shown icon still appears on photo 2.
What should I do to get my Mac companion in working condition?
First of all, make sure you have current backups. What follows should not affect your configuration or records or data, but changes can sometimes have unexpected or unforeseen - results more than a few people posting questions in the forums do not have backups, unfortunately.
As for your question... Remove this link from the alias and re-create itand see if that solves your access.
Maybe you are looking for
-
How to hide the first run welcome page
Dear support, When I deploy Firefox on Windows 10, I get a "Firefox + Windows 10. Perfect together. "Home page as well as my default homepage. So, I get 2 tabs. Do you know how to avoid this homepage for my deployments? Thank you
-
Hello! Immediately after the Update Beta 34.0, Silverlight and Flash, completely stopped working in Firefox. I am running Vista Home Premium, Service Pack 2. They work fine in Internet Explorer. This happens in any website I want. For example, I can
-
I have a problem with my icloud
I can't access my username in icloud, I tried several to solve this problem, but I can't get something, so I hope that if some cases bodies help that my iphone is now closed with icloud
-
When closed how can I close each tab multiple/all tabs
I click on the X to close and the pop-up choice is in fact the number of open tabs (3 or 4, etc.) or cancel. When I use Internet Explorer I can close all of them at once. 'close all tabs or just this one' until all are closed
-
T42 comprehensive mother change
I have a F1G-2373. I need to change the motherboard 1. someone with experience of this exercise? advise? 2. the following is main manual. Is it technically required or merely recommended? -Restore the serial number of the unit of the system when the