Problems with Mac OS 10.5.8 and HP 2355xi PSX

Similar Questions

• Scanning with Mac OS 10.6.1 and C4780

  All-

  I have a MacBook Pro with Mac OS 10.6.1 and just bought a HP Photosmart C4780.  I can print and copy documents very well.  The problem is when I try to scan documents.  If I use the button on the C4780 an error message is displayed.  If I use HP Photosmart Studio and use the scan key a scanner is not detected.  On the other hand, when I go to 'System Preferences' and 'Printer & Fax' the C4780 appears.  When I press the scan button, the scanner will work, but I am now using MacBook Pro software and the HP software not... any suggestions?

  I printed a wireless network Test report and any specified summary diagnosis was a 'PASS '.  In addition, I does not use a USB connection, but thanks to my wireless network.

  Bottom Line: I can scan documents using software MacBook Pro, but not the HP software.  Work of printer and copier.

  All-
  After posting this message I tried to update my computer and I received an update from HP.  After you install the update, all functions on my HP Photosmart C4780 work.
  Message edited by Triusaf on 09/16/2009 18:05

  If you are using Snow Leopard: If you have loaded the software from the CD for the printer HP and unless your CD says it supports in particular 10.6 Snow Leopard, you need to uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Restart your Mac

  Now run a software update.

  Then, remove and reinstall the printer in System Preferences, Print & Fax.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have a problem with the drag (cursor snap) video and audio stuttering!

  I have an emachine windows vista home edition and have caused problems with the drag (cursor snap) video and audio stuttering.  my hardware configuration includes an HP printer and a video camera from Microsoft with pregnant beyond the keyboard, monitor, and system speakers routine.  Are there updates or the settings that I can apply to correct this problem?

  http://www.eMachines.com/support/drivers.html

  The latest drivers/software for your machine come directly from eMachines.

  Click the link above for them.

  See you soon.

  Mick Murphy - Microsoft partner

• Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Is anyone else having problems with Windows 8 when your typing and e-mail? For some reason, it comes out constantly to the tile screen while I type making me about starting more.

  Hi Chaz,

  I thank you for your message and gives us a chance to help you. I see that the Mail app closes while you are typing an email.

  Please answer these questions to get a better understanding of the issue.
  1 have changes made to your computer before this problem?
  2 shut down other applications while they are in use?
  3. do you get an error code?

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the troubleshooter of app.

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  Open this link to launch the troubleshooter.

  Method 2: Update the application.

  Method 3: Reinstall the application.

  This link has the steps that you can follow to update and reinstall the application.

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Feel free to use the forum for any other issue of Windows, you may have.

• I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?

  I have a license of cs6 ps for windows but I change with mac, can I disable win and activate for mac?

  Please check: a product for another language or version of trading platform

• I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.

• How can Photoshop 6.0 compatible with Mac OS Mavericks or Yosemite and if so, I install it?

  How can Photoshop 6.0 compatible with Mac OS Mavericks or Yosemite and if so, I install it?

  If you mean Photoshop CS6, yes it is. Simply run the installation program.

  If you mean Photoshop 6, none that is too old. It was made for older PPC Macs. It will not install

  If you mean that Photoshop Elements 6, please see the forums of Photoshop Elements for advice on this.

  (Sometimes posters use 6 to designate everything above).

  Gene

• Problems with the installation of the bridge and the company

  Hello world!
  I have problems with the installation of the bridge and the company. Although I have install both of them successfully, when I try to connect to the gateway through the console I have error message saying there is no company installed. In fact, I get an error as well through the wizard saying "failed to run. Please see details below:
  
  Unable to launch: "C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\LRE19.tmp\bin\java.exe-Dtemp.dir=C:\DOCUME~1\SIEBEL~1\LOCALS~1\Temp\2\ - cp C:\siebelent\siebsrvr\bin\setup.jar run - args LANG = ENU VISIBILITY = REPEAT BUSINESS = FALSE MODE = MODEL_FILE=C:\siebelent\siebsrvr\admin\siebel_server_sia.scm LIVE" error code: ""(SBL-STJ-00152)-1 "»
  
  Also, when I try ot run the following in the console: C:\siebelent\gtwysrvr\BIN\srvrmgr.exe - u - p SADMIN SADMIN - g siebelwin2k32-e SIEBELENT, I get this error: fatal error (3015667): the program variable 1% is not defined, existing...
  
  
  Thank you in advance for your help!
  
  MARIANA

  Mariana,

  Please confirm if you try to configure the siebel server in the same machine as the gateway server. If so try to use localhost instead of the hostname of the machine setting up Siebel server.

  I assume you are using windows 2003 as the operating system.

  Thank you

  Wilson

• Problem with MAC pinning and new VLAN

  [Cross Announces nexus 1000V and forums of the UCS]

  Hi all, I have a working of the UCS 1.4 configuration (3i) and the Nexus 1000V 1.4 and according to best practices guide uses "channel-group auto on mac - pinning mode" on the uplink of Nexus. I have a problem when you add a new VLAN in this environment, and it is a reproducible problem in two different facilities.

  I pass by the VLAN usual creation process on the Nexus, the network upstream and within the UCS himself. I create new port vethernet profile and set it as an access port in the new VIRTUAL LAN. However when I join a VM (existing or new) to this new port vethernet profile in vCentre virtual machine cannot communicate with anything. However, if I disable MAC pinning with 'no channel-group auto on mac - pinning mode', the virtual machine will start instantly talk to the outside world and the new VIRTUAL LAN is running. Can I turn MAC pinning back once again, and everything continues to work.

  So the question is, is this normal or is there a problem? MAC the Θtiquetage has a brief interruption of the uplink, so is not a viable long-term customer solution when they want to add new VLAN. Is it possible to add new VLANS in this scenario without any unavailability of the network, but brief?

  Thank you

  Close the loop on this.  You tap the CSCto00715bug.

  Symptom: New MAC address is not learn on vem in the l2 table even though the mac address table is not overflow yet. vemcmd show l2-emergency-aging-stats | grep "Number of entries that could not be inserted:" will show extreme large number. Conditions: Nexus1000v VEM running on SV1.4 release. There are two CPU cores on the host. This issue may happen at race condition. Workaround: Reboot the ESX/ESXi host. 

  This problem is corrected in the 1. 4A release.

  Kind regards

  Robert

• Printing problems with MAC OS x 10.7

  I have a new MAC with LION installed and I got a curious experience involved printing with both my HP printers: CM1312nfi and C1120n.

  In the first instance, after one by one by apple-store settings, printers worked, after a few days, they could be detected, but print gave an error.

  After the call apple and all they suggested (reset print and adding them again, either via USB to wifi) tried nothing has changed.

  A few days later I tried the steps suggested and got a new behavior: a software download.

  But at the end of the download and installation, the following message appears:
  "the software for printing has been installed correctly. Please reinstall the software from the manufacturer. »

  My printers are currently supported by the LION, but the problem is that HP has NOT not any software for any of them to download from the report:

  "With the release of OS X 10.7 Lion, HP provides software and updated printer drivers." These updates are available via Apple software updates in Mac OS X."

  My questions are:
  How to get a driver to work for them?
  Will I update the firmware?
  Maybe 10.6 against pilot would be nice as well? If so, where to download?

  Hello

  Normally, the software must be downloaded on Apple software update exectly.

  With the help of a software package intended for other operating system is not recommended, may not work and may affect the performance of your Mac as well.

  Let's try the following steps:

  First, enter the printer preferences > print & scan, right click in the background printers area and reset the system of printong once more.

  Launch Applications > utilities > disk utility, select your operating system to partition and click the repair disk permissions button located under the first aid tab, in order to be sure, there are not any permissions issue that caused the failure of the software update.

  Download and install the full package of HP printer software 2.7, the installation contains all the HP drivers available by Apple Software Update:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers2.7.2.dmg

  Enter once more printing & scanning, click the sign more, add the HP Color LaserJet CM1312 MFP Series , and then try to print.

  On the C1120n model you mentioned, could you please specify the exact model?

  Looking for HP and google I could not locate this model for any printer series.

  Just trying to add the printer as for the CM1312, hoewever please specify model correct you, we will be that there is no comprehensive software available for the specific model.

  Please let me know any progress

  Jean-François

• Problems with MAC WET11 cloning features

  Hello

  I'm having a devil of a time to set up my v2 WET11 to allow my XBOX be fully connected. I can configure and connect the bridge, ping, ftp files to XBOX etc. Only problem is when I try to play bound. I can see the game in progress on the second XBOX but cannot participate. Related game works perfectly when Xbox is wired to the router.  I know that play bound depends on each game console broadcasting their MAC, so I need to clone the MAC address of the XBOX to use the bridge.

  Unfortunately the WET11 web configuration interface I cannot do. Under Settings/Advanced cloning Mode, all controls are disabled - greyed. This includes the control that allows you to turn on cloning.  I took a shot the script behind the page and it seems that it checks to see if 'disable cloning' is selected and if so, disables all controls of cloning, including one that would allow me to get back on. Since the default value is disabled, it is the programmatic equivalent to lock the keys in the car. You can take a look at here emulated interface:

  http://UI.Linksys.com/files/WET11/v2/advanced.html

  Of course, the demo is fully functional and do not exhibit the problem...

  Many people have described solve their XBOX related play questions by cloning the MAC address of the XBOX and see change settings using the web interface.

  I tried different versions of the firmware 2.06 and 2.07, 2.08 USA 2.08 EU. Same results. Tried the Installer Wizard 1.06 worm, but he does not even include the MAC settings.

  Had two cats different with online support agents and the two seem as puzzled as I am.

  Am I missing something obvious? Depends on the availability of cloning parameters options elsewhere in the config utility?  Is the interface designed for cloning taking place without intervention of the user on the v2 and v1? (doubt)

  Has anyone else seen elsewhere?

  I know that people have written code to pull the strings of parameters off the unit then maybe the reverse is true and I can write the script to directly change the settings.

  Any suggestion would be appreciated.

  Rick

  Well well well - apparently the firmware is not totally compatible with IE7. Downloaded Firefox and the interface works as advertised.

  Rick

• Problem with Mac OSX 10.7.5 Scan HP1536dnf

  I just installed the driver download HP online for my Mac (Mac OS x 10.7) and the subject of HP 1536dnf MFP; When you try to use the function HP1536dnf Scan of my MacBookPro; I get the following message:

  192.168.0.6 is currently unavailable. Make sure that your device is turned on, check the connection and make sure that your network is working properly. If these conditions are correct, restart the device and try to scan the image. I have check the router and Mac configurations without solving the problem.

  My MacBook Pro is connected to a cable Modem wireless Motorola & Gigabit Router (model SGB6680) via a wireless link, and the HP1536dnf is connect through the router Motorola (192.168.0.6) Lan connection.

  NOTE: I am able to print to the HP1536dnf of the Mac, but I am not in a position to operate the scan function wirhout to get the above message.  This brings me to understand the Mac connection to the router and the local network of the HP1536dnf works correctly.

  Please suggest items to check or a solution for my problem.  Thank you!

  Hello Ray1536dnf,

  Thanks for the post.  With this scanning is a process more complex printing we can have some other issue here.  I might suggest to take a look at the below document specifically solution 3, assign a static IP address.  Good luck!

  http://support.HP.com/us-en/document/c02790693

• a problem with the display of window margins and columns

  Hey there,

  I have a problem with my window margins and columns. Whenever I open it, it stuck in the upper right of my screen and I can't press OK.

  I tried to switch between workspaces, notice to update my program, restart the program, restart my computer, unplugged my second screen, rest again... nothing helps. Does anyone have an idea? It drives me crazy.

  

  Reset preferences also probably won't help, but worth to try: replace your preferences

  I'm a Windows user, but is there any command on Mac that allows you to move dialog boxes by using the arrow keys on the keyboard, as Windows users do?

• Problem with vibrations of the Iphone 5 and SE

  Hello, my name is Alexander, im of the Brazil and I speak very well English. I owned an Iphone 5 purchased in Italy in September 2012 and I used it until today 02/08/16 when I decided to buy a SE 64 GB my iphone because Iphone 5 was a problem that could not be resolved. I used it and noticed the battery was swelling and suddenly the Iphone 5 continues to vibrate in all operations. I took it to the interview and they changed the vibrating motor and the power cable, cable, but does not work. I thought it might be a problem with the motherboard by the blown battery occurried. So I decided to buy a SE 64 GB and when I restored the Iphone 5 in SE, it runs with the same problem. The store give me another a 64 and after the restored backup, the same problem occuried. They had upgraded the operating system, but the only way to solve it was a complete reset of fabric and make a backup of restore contacts and photos through the Icloud

  Can someone help me?

  There are a few app couldn't stop the iphone vibrates? without all my applications and files, the SE Iphone works fine

  I don't know if you want vibration on or off. Anyway, this is the setting you are looking for...

  Settings > general > accessibility > vibrations