Prompt values not reflected in reports.
HelloI created two reports both with two columns. The first column is the main dimension (an id that represents a specific entity) and is invited, the second column is the first colum with a filter in the standings. In this filter to the ranking, I also specify a ranking. So, if I specify grade 1 column 2 filter looks like this: WHERE (RANK ("-"USER.USER-ID ') = 1). In the second report, I specify the row 2.
Then I create 2 new reports that have also the same ID column and other columns. These two reports are my 'real' reports In the id column I Specifies a filter as being a filter based on the results of another application. As you can guess, I choose the corresponding reports already mentioned as reference reports. I then place these 'real' reports on a page of dashboard with a command prompt. The prompt is set to the ID, the reports as a column and is of type "multiple selection".
This was built to be able to show separate reports for the ID that I specify at the command prompt. Say I select id 100 and id 200 in the prompt, the dashboard shows two separate reports, one for id 100 and the other for the id 200.
Now the problem:
For some identifiers, however, the report is not generated. Although I'm sure that the identifier exists, the dashboard is back with the message:
No results
All data is not cause to the specified criteria. This is often caused by the application of filters that are too restrictive or contain incorrect values. Please check your filters to ask and try again. The currently applied filters are listed below.
Rank (ID) is equal to 2.
Does anyone know what could cause this?
Thanks in advance.
Hello
This is called a bug of OBIEE, try using RCOMPTE instead of RANK.
Concerning
John
http://obiee101.blogspot.com/
Tags: Business Intelligence
Similar Questions
-
Value not autoscaled in report
Hello
I have problems with the values that aren't autoscaled in a report. I'm referring to a Common value: number of function groovy in a report. The column is defined to use vmware AutoScale Renderer with vFoglight, but it is not suitable to the device not showing the correct device.
Tried to change the groovy function to return a metric, metric or even a LogicalDisk object, but nothing does not to get the scaling value. Someone at - it an idea of what type of data I need to give the Auto scale converter is converted to the correct size/value?
Best regards
hEINER
As a general rule, autoscales work outside the integers or doubles. What exactly do you do or have generated?
-
How to display multiple prompt values selected in the report
Hello
I have a LOV: SELECT DISTINCT CO. V_MOVEMENT. ORIGIN_BRANCH_CODE CO. V_MOVEMENT ORDER BY 1
and a setting associated with it, which is the selection of several permitted. The name of the parameter is P_BRANCH.
When I view P_BRANCH the top of my report (RTF), it is showing only one value, while I need to display all the selected values like separated by commas.
Help, please.
Thank you and best regards,
AntaraUse this:
,
Thank you
Bipuser -
prompt value fades is not in the report sometimes
Hello
I use obiee 11g, one thing I noticed that I have a dashboard that has lots of pages. On every page I have guests.
The problem I've noticed sometimes is, I used guests from the column, after application guests value in the report which I select the prompt
value, then I click on apply and then the report is updated and then I go to the next page or can make a sign, sometimes the prompt value is preserved.
IE in the report of the filter so that I would have used the particular column column is invited, but to my surprise, I see that whereas he could hold some value.
as the column is worth less then and there still I have him as a guest?
Why something like this should happen at all?
Thank youHello
To add a tag in the instanceconfig.xml file to achieve this.
Stop services and placed with the tag below in instanceconfig.xmlFAKE The tag can be placed anywhere between the server in instanceconfig.xml instance.
Restart the services and the opening of session in enforcement and control by setting values in the guests.I hope this helps.
Thank you
Oldia... -
Capture the moment of execution prompt values to use in the formula of financial reports
Hello
I need to ask two things:
1. we create a report (via Hyperion Financial reporting tool) in which the user will select a month (through the execution of a command prompt) for which data should be displayed.
We need calculate and display in the report, A-T-D average until this month for which we have to count the chosen month (for example, our fiscal year starts from July, July count = 1. Y-T-D avg in October = A-T-D value until October/4). Therefore, to get this number, we need capture the value of the prompt of what month the user has selected.
There are several other cases where you need to capture the prompt values selected by the user.
2. can we compare the current value of a dimension with a string in the IfThen() structure in the reporting tool hyperion financial? I was not able to achieve the same thing with success. Also, I need to get the value of a cell to use in an IfThen() State, but it only supports line or column number and not a cell (for example IfThen([1]=0,1,2) and not IfThen([1,B]=0,1,2)).
The pointers will be highly appreciated.
Thank you and best regards.
Published by: N.S. April 26, 2011 01:31Hi NS
Have you seen the Workforce Planning or Capex Palnning for Hyperion Planning modules? They contain called members calendar TP-Index and Fiscal TP-Index (or something similar), these are members the value dynamic calc and their sole purpose is to return an index value for a given for use in formulas in Essbase reporting period (or as I've used them repeatedly in the reports).
If you set these to the top then in your report, you can use the command prompt to call the TP-Index for OCTS, for example 4 tax value in one column and the guest even recover your CDA value in a second column then in a third column simply divide one by the other. You could even do the calculation in Essbase so if needed and just get it back.
I do not think that the IfThen en function a text value.
Hope this helps
Stuart -
value of the linked report prompt
Hi all:
I encountered a problem. There are two reports, we will appoint Report1 and Report2, they have different applications but even invited, report 2 is bound to report 1. My problem is when I chose a prompt value and link to the Report2, the 2 quick report value is by default but not the value I just chose. Is there a solution or idea about it.
Thanks in advance.
PS: report 2 is hidden and show as a new window. The prompt scope is level dashboard.The problem is that you use the link or Image object. The idea is that you said that the second report opens in a new window, one of its interesting features. The problem is, guests dashboard are not placed using this object.
You use the Guid. NAV object. This will move the prompt of the dashboard saved in your PV to the second report.
-
How to use the prompt value in the column of the report
Hello
I have a quick report column which is 'Adj Type' that contains values 10,20,30, and when the user selects Adj Type = 10, this value should be passed on to the column of the report.
For example. Value in column 1 is 10 and this should multiple with the prompt value and production is expected to be 10 * 10.
Ideas how to capture the prompt values in the column of the report for the calculation.Hi hsekar,
(1) declare a presentation online in the section variable set Variable--> Variable--> P_var presentation
(2) in Fx Table_name. Your_column * @{P_Var}
@{P_var} {20} (20 is the default, it replaces when a user selects the value in the command prompt
Thank you
Saichand.v -
Get-vmhost does not reflect the number of correct hosts on a few scenarios
Hello members of the community.
When I try to use the cmdlet get-vmhost against a cluster that has one or no hosts in there, I don't get the number of correct hosts. Here are some lines for this information.
foreach ($objDataCenter to $objColDataCenters)
{
$objColClusters = get-Cluster-location $objDataCenterforeach ($objcluster to $objColClusters)
{
$Details = $Null
$objClusterBaseRP = $objHosts = $objDataStores = $objVMs = $Null
$intNUmDatastores = $intNumHostCPUs = $intTotCPUMhz = $intTotUsageCPUMhz = 0
$intTotMemMB = $intTotUsageMemMB = 0
$CPUStat = $CPUStatMax = $MemoryStat = $MemoryStatMax = 0
$intTotMemGB = $intUsageGB = $intMemResGB = $intMemLmtGB = 0
$inttOTDiskCapacityMB = $intTotDiskFreeMB = $intTotDSCapacityGB = $intTotDSFreeGB = 0
$intTotVMMemGB = $intTotVMCPUMhz = $intNumVMCpus = $intTotVMMemMB = 0
$intTotVMProvisionedSpaceGB = $intTotVMUsedSpaceGB = 0$objHosts = get-vmHost-location $objcluster
$objHosts.Count
}
}
code above produce white for clusters that has one host for all other groupings that has 2 or several hosts results are correct. I know that there is no point of having a single node cluster or not, but the result does not reflect his decent stats.
In the same way under lines also produce incorrect information to the cluster that has no HOST or a single HOST that is in maintenance mode and has no inside VMs
$objVMs = get-VM-location $objCluster
$objVMs | %{
$intNumVMCpus += $_. NumCpu
$intTotVMMemMB += $_. MemoryMB
$intTotVMProvisionedSpaceGB += $_. ProvisionedSpaceGB
$intTotVMUsedSpaceGB += $_.usedSpaceGB
}When I print the values of all the variables above, it should report 0 instead I have the chance to see some numbers. Please note I have explicitly assign values $null to all objects and 0 in all other variables at the beginning of the loop for clusters.
Any help to solve this is greatly appreciated - thanks
Kind regards, Philippe
Hello, Ramkrish-
Welcome to the communities.
For the first part, the number of hosts in a cluster with zero (0) or one 1 host - there are a number of things happening there.
When the Get-VMHost call returns only one host, and you then try to access to the. Property of the count of $objHosts, you try to access this property on an object VMHost, not an array of length 1 with a VMHost inside. And, since the VMHost object has no property '. " Count' you get a return of the 'white' or null.
And when Get-VMHost will return no host, and you are trying to access. Count on $objHosts, you effectively type '$null. "Count", since $objHosts - eq $null at that time.
Two ways to handle these cases would be to use the Measure-Object cmdlet or explicitly to a table, even if zero or one VMHosts are returned. As:
## using Measure-Object$objHosts = Get-VMHost -Location $objcluster($objHosts | Measure-Object).Count ## correctly returns 0 or 1 (or greater)...## or## forcing an array, even if 0 or 1 items returned$objHosts = @(Get-VMHost -Location $objcluster)$objHosts.Count ## correctly returns 0 or 1 (or greater)...
Regarding the behavior you're seeing with the statement Foreach-Object with $objVMs, I suspect that the behavior of the Foreach-Object statement when you're running an empyt null him is at stake here. In other words, while you can imagine "$arrEmptyArray | % {'Hello'}' to produce anything, happening actually by an interation of the loop (really - try - the). So to avoid this, you can delete the unnecessary part that stores the output of Get - VM in the variable "$objVMs" and combine the lines to channel the output from Get - VM directly to the Foreach-Object statement, as:
Get-VM -Location $objCluster | %{ $intNumVMCpus += $_.NumCpu $intTotVMMemMB += $_.MemoryMB $intTotVMProvisionedSpaceGB += $_.ProvisionedSpaceGB $intTotVMUsedSpaceGB += $_.usedSpaceGB}
By the way: while we're updating this code a little, another way that you could get these totals is again using the Measure-Object cmdlet, this time with the parameter - sum, as:
Get-VM -Location $objCluster | Measure-Object -Sum -Property NumCpu, MemoryMB, ProvisionedSpaceGB, usedSpaceGB
Much more compact and allows just of PowerShell do the work. Although you then maintain the return of the object of measures, depending on the situation, it is quite practical.
How about that?
-
Ask in the dashboard as link can filter based on the prompt values?
Hi all
In a dashboard, in a section using the prompt of commands and other section with the image object or the link and the given path was for a query created in the responses. The dashboard looks like a prompt command and below the link to the application.
If I enter the prompt value, click on the link-> the pop up window and view the report but does not filter the data according to the prompt value.
So, it is possible to do like that? If it is please share how to do this?
Thanks in advance!Do not use the link or Image. Use the Guid. NAV. oppose instead. Link or Image may open in a new window, but the guests are not passed. GUID. NAV. object passes guests, which is what you want, but can not open in a new window.
-
Display prompt then navigate to another report
Hello
I have a first report that display values. When I click on the value I navigate to another report. I have a problem. When the second report is open, guests are not display so my second report is too long and irrelevant.
Can you help me to find a way to do it. The best would be to show the second report, based on the value of the first report. (the value of the first report is considered to be a command prompt).
Kind regardsWhen you create the second report, you want to create a filter on the column with the value "is invited". Then when the user navigates on the second report, it will be filtered according to the value that drill down on a user.
For example, if the user explores the activity Id, the second report would have a filter on the activity Id and the operator is set to "Is invited".
Good luck
Thom -
Hard drive is not reflected in the list of disks
Device Manager recognizes a disk but the disk management does not show in the list of disks (affected/not allocated). You want to set up and assign a drive letter. Thank you. Russ
< original="" title:="" disk="" management="">
Hello Russell,
Thanks for posting your query on the Microsoft Community.
With the publication of the description, I understand that the hard drive is not reflected in the list of disks on your Windows 7 operating system. I will certainly help you get this problem.
This problem can occur because of incorrect settings. In order to solve the problem, I would suggest trying the following methods and check if this is useful:
Method 1: Troubleshooting hardware and devices
Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:
1. open Control Panel
2. click Troubleshooting and select the option to display all on the left pane.
3. click Troubleshooting of hardware and devices and follow the prompts.
Try Method 2, if the problem persists
Method 2: Make sure that the drive is enabled
Follow the below mentioned steps to make sure that the drive is enabled:
1. click on start and type device manager in the search box
2. click on Device Manager in the control panel list
3 locate the drives item in the list, and then click the small arrow to the right to expand the list of readers
If a disk is disabled you will see an icon with an arrow pointing down on the icon of the hard disk
If you see an icon with an arrow pointing down on the hard drive icon, double-click the icon and click on the button Activate peripheral
4 then click on activate a device dialog box, click Next, and then click on finish
5. click Close, and then close the Device Manager window
Note: If you do not see your hard drive in the listed readers, the player is not detected by Windows.
Note: If you receive an error message when the hard disk is activated, you can have a bad hard drive.
Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.
-
Popup LOV selected the value not in session state
I have a pop LOV element on a page in my application. Once the item has been selected in the list presented, I would like to use as part of a select statement. Select statement failed. It turns out that the value I want the popup THAT LOV is not being saved in session state, so of course the select statement fails. I determine this by clicking on the session menu item in the developer bar - the item itself presents itself, but the value is empty.
What would cause a popup LOV value choice not finish by in session state, and how do I make sure he gets there?
Thank you!
If you need the value in a SQL report, you can just set "Elements of Page to submit" in your report to your LOV element definition. Otherwise, create a dynamic fire action when your LOV is changed with a set of pl/sql null process action; then set Page elements to send to your LOV element.
Alternatively you could do it manually with your own function/Manager javascript using the '$s' Apex API by creating a dynamic action that JavaScript is triggered then the loading of the page:
$("#PXX_YOUR_LOV").on('change',function(){ var getValue=$(this).val(); $s('PXX_YOUR_LOV', getValue); });
Changing the value in LOV only updates the HTML code, the element must be submitted to the server so that the value that will be put in session state. The gurus can explain more, but the above methods are what I use depending on the situation.
see you soon,
John
-
vCOps 5.8.4 not reflecting is not some changes to the VMS in vCenter
Hi all
Number of things I've noticed since this new facility. I'm a bit new to the product so go easy on me.
When I make a change recommended that a computer virtual based on an oversized VM report, for example, the change is not reflected. The changes took place 24 hours ago, I expect to see that, in a new report, I would think. Also, if I migrate virtual machines from 1 host to another host that the change is not reflected in the tree. The only way I could get this show had to restart the GUI admin vCOps. I have waited days after the vmotions and don't see anything. Any ideas on that?
Thanks, Jake
You can clear your Java Cache also although I suspect that this may be the culprit.
https://www.Java.com/en/download/help/plugin_cache.XML
See you soon,.
-
Display a value or another on reports 6i
Hello world
I made a report using reports 6i and I have a field where I would like to display a value of any of my 2 formulas I created, but if one of my formulas brings an empty value, then I want this field to display the value of my alternative, but if the two have a value not empty so I want to show that I want.
For example:
I have a field named credit in my layout and I have 2 formula named columns: Formula1 and Formula2. If Formula1 is empty so I want show Formula2, but if the two are not empty, so I want to just display formula1.
This is the code I use in formula 1:
This is the code that I use for Formula2:function CREDITOSFormula return Number is RETURN NUMBER(10,2); begin DECLARE t_credQ1 NUMBER(10,2); CURSOR c_credQ1 IS SELECT SUM(CREDIT_VALUE) FROM TABLE1 A, TABLE2 B WHERE A.SCHOOL_ID =:SCHOOL AND A.CREDIT_STATUS = :STATUS AND B.STUDENT_ID = :STUDENT AND B.PERIOD = :SCHOOL_YEAR AND B.GRADE_Q1 IS NOT NULL AND A.CLASS_ID = B.CLASS_ID AND A.SCHOOL_ID = B.SCHOOL_ID; BEGIN OPEN c_credQ1; FETCH c_credQ1 INTO t_credQ1; IF c_credQ1%FOUND THEN CLOSE c_credQ1; :PLACE_CREDQ1 := t_credQ1; ELSE CLOSE c_credQ1; END IF; RETURN t_credQ1; END; end;
function CF_1Formula return Number is RETURN NUMBER(10,2); begin DECLARE t_credQ2 NUMBER(10,2); CURSOR c_credQ2 IS SELECT SUM(CREDIT_VALUE) FROM TABLE1 A, TABLE2 B WHERE A.SCHOOL_ID =:SCHOOL AND A.CREDIT_STATUS = :STATUS AND B.STUDENT_ID = :STUDENT AND B.PERIOD = :SCHOOL_YEAR AND B.GRADE_Q2 IS NOT NULL AND A.CLASS_ID = B.CLASS_ID AND A.SCHOOL_ID = B.SCHOOL_ID; BEGIN OPEN c_credQ2; FETCH c_credQ2 INTO t_credQ2; IF c_credQ2%FOUND THEN CLOSE c_credQ2; :PLACE_CREDQ2 := t_credQ2; ELSE CLOSE c_credQ2; END IF; RETURN t_credQ2; END; end;
user626836 wrote:
Hi Pradhyumn and thanks for your reply,
Is it possible to use only a single domain where I can show just two values? For example:
If the value of: CREDITOS is null, and then view the value of: CF_1 or if the value of: CF_1 is set to null, and then view the value of: CREDITOS
Is this possible to do?You can anyway.
1. create two ranked in the same position where is the first source of field: CREDITOS and the second is: CF_1
2. Select filed and press F11 to go the code editor for the classified: CREDITOSTo write
if :CREDITOS > 0 then return (true); else return (false); end if;
Ditto for: CF_1.
I hope this works...
Hamid
-
based on the prompt value see the FDF anayasis
Hello
I have a situation like this
I use obiee 11g
Based on the prompt value in him would like to show 3 different analayses.
I mean that if the value of guest in the page has as abc data it should show the anlaysis1
If the prompt value data as def it should show the anlaysis2
If the prompt value data as the IGS, it should show the anlaysis3
If the prompt value data as jkl it should show the anlaysis3
Why 3 diff analysis is because I have my list 2 columns in each anayaiss and they are 3 different tables.
One more thing
Obiee do we have a show and a return value for a radiobutton/drop-down list. As show us abc how invites and returns 1. is possible?
Thank you
Published by: user123 on July 12, 2011 12:29You can have n number of reports, simply use the union all in the dash prompt sql results and this will give you the choice to select any report you want.
Maybe you are looking for
-
Photos. In the app Gallery are black
If anyone has experienced this? Is it possible to recover photos? In the section the app Gallery, all photos since on film July (photos may be 140 or almost) are simply black and white photos. Ditto the auto-sauvegardes to Google. Any help would be a
-
Battery problem: HP Envy 6-1006sa sleekbook
Hi guys forum newbie here just want to ask you a few questions. I recently bought a second hand HP Envy 6-1006sa sleekbook and I love it. It was installed at that time, I bought and showed a remaining time of Windows 7 "'8.5 hours" 100% charge on 'po
-
Question about fix Windows XP install on laptop with connected screen
The laptop is a Dell Inspiron B130 with Windows XP Home SP3. I got to a little old lady after the display has stopped working. The laptop works fine hooked up to a monitor and the display still works sometimes. I tried to replace the inverter and
-
The time on the clock continues to change at the wrong time.
The time on the clock continues to change at the wrong time. First of all, make sure that your clock is set to the correct time zone. Right click on the clock. Select adjust date and time. Then select change time zone. If your time zone is correct, y
-
I use a Dell Dimension e521 computer. the program is windows Vista Home Basic. The web page, the Internet is too large for my monitor. Y at - it a correction for this. My typing is slow.