Protect the MSP path is in alarm

Similar Questions

• Display the full path to the extensions?

  Hey there,
  I just found out that you can do the full path of the visible plugins in topic: config, it's useful to get rid of some annoying plugins, I don't want or need.
  Now I wonder if it is also a way to activate this for extensions? I know that the 'good' extensions settle in the profile folder, but those sinister (I didn't want it installed in the first lane) are not located there.
  One of the extensions would be "Browsing Protection 1.10". I know that I can turn it off, but I want deleted, no idea where to find the correct files however.

  Firefox usually detects these extensions installed in the world via an analysis of the registry.

  • https://developer.Mozilla.org/en/Installing_extensions
  • https://developer.Mozilla.org/en/Adding_Extensions_using_the_Windows_Registry

• Error code: 0 x 80070035 the network path was not found.

  Hi all

  I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
  Windows cannot access \\hyd02
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035 the network path was not found.
  
  
  I did the settings below:
  (1) file and printer sharing are enabled in both systems.
  (2) firewall is disabled in the systems.
  (3) in the center of security and network, the network is private.
  and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
  Off, media sharing turned OFF.
  (4) the name of the task force in both the system is the same.
  Can someone help me solve this error...
  Thank you
  Sylvie G

  Hi Sylvie G

  Thanks for posting on Microsoft Answers.

  Are the same username and password on both systems?
  What is the share name you are trying to do on the XP machine?
  Let's say that the share name is music, you would get to it by typing \\hyd02\music

  Can you do a Test PING since the Vista PC on the XP PC?
  Go to a command prompt and type ping followed by the IP address of the computer XP

  Please post back the results... Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.

• What is the current path before the login for file (image)?

  Hello
  
  Once I login, I get the background images providing paths relative to the tag in the page, as follows:
  

  inlineStyle="background-image:url('Images/welcome.jpg');

  that points to:
  C:\Myproject\public_html\Images\welcome.jpg
  
  Note that I have not specified any root "/" in the above path. This works.
  
  Now the problem is before sign you, it's in the login page. Here, for some reason, the image above is not find and load.
  
  The curious thing is that once I am logged in, if I go back to the opening page of initial session with the back button of the browser, now the image is found and loaded! Of course, now the only difference is that I don't have a current session, since I am already connected.
  
  For this reason, I think that I specify an another relative path, since the paths vary depending on the State of the session (no current session vs session) or perhaps paths must be absolute (but different from/Images/thanks, since it does not either)...
  
  You have an idea?

  Your web.xml would be this tag in this case that protects the unauthorized root access-

  
  
  allPages
  /*
  
  
  valid users
  

  By https://blogs.oracle.com/jdevotnharvest/entry/solving_jdeveloper_11gr2_issue_with
  Protect the path Java EE application root against unauthenticated access means however also that the resources of the web such as photos or stylesheets or deferred loaded JavaScript libraries.
  are blocked until the user is authenticated. For the same reason clients often report absent from the images on their web login pages.

  Or you can remove the tag above if you don't really care about unauthorized access or add the following line to your web.xml file
  **
  images*.
  /images/images*.
  **
  **
  valid users
  **
  **

  Published by: detrilles on May 18, 2012 Sudipto 17:16

• Showing the full path of the file in the Save as dialog box

  I'm a relatively new for MAC OS and I took the habit of intelligent services on Microsoft file manipulation, in particular to the Save as dialog box. Who has a little smart "arrows" and "buttons" allowing you to ask around the system of files easily, but I faced something else in the MAC operating system.

  Finally, I was able to pass on the path of file bar in the Finder (basically, that nice, small bar with the name of folders/sub-sub-sub-folders you can switch to and it shows "where you are both in the file system"), but I don't miss the Save as dialog box. I tried to find it in the settings to turn it on, scoured the internet, talked with experts at Apple, also called the central phone number, but I couldn't learn all solutions to get the bar path of file under tension to the Save as dialog box.

  And believe me, it's very annoying, when you create a file structure when you register under ' week/Tuesday/XY client Documents/work/approvals/journal/2016/August/2nd /' a file and for the recording of the version changed the same file under the same path, but not to not only return to the file a subfolder creation there AB of the customer, I have to click again through the whole lot.

  The arrows 'story' don't help because when I click on the it puts me directly to record under the folder where I have the last recorded the previous file, or help click on the drop-down above, where records are listed because I could never find the subfolder where I want to go back to there.

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  ..., and I don't want to keep a Finder opens just to copy..., on the way to the record, which was the same effort and has been even more professional!

  I would like to just turn this simple file path bar,..., even that which is available in the Finder!

  Any ideas would be appreciated, thanks for sharing your thoughts in advance, Ian

  Imre of Glen Waverley wrote:

  Are there solutions to get the path of file under tension to the Save dialog box under?

  Or is there a plan to get it in the new version of the operating system?

  It is the same on the open file dialog box...

  1 NO.

  2. we are all just users here and have no info about Apple's plans.

  If you do not want to let Apple know your feelings, you can send your comments here.

  http://www.Apple.com/feedback/

• The shortcut error message: the specified path is not; Maybe reinstall Firefox whenever I want to use.

  When I install Firefox, it works very well. Installation does not include a shortcut on my desktop, then when I try to start it again, I go to "all programs." Next, I get the message "the specified path does not exist. I think it has something to do with the confusion between two hard disks. C: drive, a small SSD, contains the operating system and other software. D: drive is my data disc, contains other applications, photos, music, etc. The way referred to in the error message is D:\Program Files (x 86) \Mozilla Firefox\firefox.exe.

  Firefox does not have the ability to choose a disk for installation. Is it possible that it is automatically installed on the C: drive, the shortcut continues to send on the D: drive?

  If you have any ideas or suggestions, I'd like to hear them.

  Using your file browser, look for Firefox in c:\Program Files (x 86)
  After, look in other files of the program (x 86)

  Once you find it, click with the right button on Firefox.exe and create a shortcut.
  Move it to your desktop. It work?

  Note: In the creation of shortcuts, you can without spaces. Instead of use;
  c:\Program Files (x 86), you should use; "c:\Program Files (x 86)".

• I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?

  Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.

• I can't have a cap of spare (protecting the legacy lightened) to my Apple pencil

  Where can I get a replacement for a lost Cap (protecting the legacy lightened) to my pencil of Apple. To the Denmark all great Apple dealers tell me to buy a new pencil from Apple?

  Call the AppleCare. It was reported that they will send you a replacement for a small fee.

• I store some sensitive information in my Notes app. The password can I protect the Notes application?

  I store sensitive information in my Notes app. The password can I protect the app?

  N ° may not be password protected.

  Do not share your password.

• How to protect the old tickets in the iphone 5 with ios 9.3?

  I managed to password protect the new notes in my Iphone but how to protect notes taken before also in my Iphone?

  You can only the password protects the new notes. I suggest 'Copy and paste' transfer of old notes in a new note, and then delete the old note. May take some time according to note how much you have, but it will work.

  Note that you can not protect note also with PDFs, audio, video, etc. show in this article.

• ProBook 4440 s: HP install can not protect the tool on Windows 8.1

  Hi support them.

  I use Probook s 4440 and install windows 8.1 pro x 64,.

  I want to install hp protect the tool for fingerprinting, but then I have install this Setup program got an error message "Microsoft .net framework3.5 is required. In fact, I have already installed .net framework 4.5.

  CLEA

  Install security HP Client Manager

  Please read the Solution

• Remove the flange in the POSIX path quotes

  Hello

  I use quotes from the POSIX path form for an AppleScript script to move files in arguments to a script shell (a process automator (see automator man)).

  When the process is complete, I would like to pass the result to another action, but the chain is cited like this:

  "(

  \"/Users/conmeubonailleuco/temporaire/converted/01.one way Ticket. mp3\ «»

  \"/Users/conmeubonailleuco/temporaire/converted/02.knockers.mp3\".

  )"

  Instead of:

  (

  "/Users/conmeubonailleuco/Temporaire/converted/01.One way Ticket.mp3."

  "/ Users/conmeubonailleuco/Temporaire/converted/02.Knockers.mp3".

  )

  What is the function to use to do?

  Thx a lot.

  Use code such as:

  points-2 '\"/Users/conmeubonailleuco/Temporaire/converted/01.One Way Ticket.mp3\' 2' as string

  (139074)

• AppleScript to obtain the physical path of a picture in the Yosemite photos app

  In iPhoto, we had this nice XML file with the metadata for each image in iPhoto.

  In the Photos of Yosemite application, there is no file.  So, I wrote an Applescript script that loops on each folder, subfolder, album, etc. and write the details to an XML file.

  When code loops, I have:

  Repeat with img in each media element of myContainer

  and I get these details:

  • file name: 2011-07-10 020. JPG
  • Keywords: 2011-07-10
  • name: missing value
  • Description:
  • favorite: false
  • Date: Monday, July 4, 2011 at 12:34:30
  • ID: 9XCpq6SzSD666TwlCHW8HA
  • height: 3240
  • Width: 4320
  • altitude: missing value
  • Location: valuemissing missing value

  But nothing in these attributes tells me where the actual image file is on the hard drive.  Anybody know a way in AppleScript to obtain the physical path of a picture in Yosemite photos app?

  Thank you!

  There are two categories of images within a library of Photos: 1) copied - no external location information stored (by default) and image is stored in the photo library and 2) referenced - only the pointers to the location of external images are stored in the photo library, and location information to real image from the file menu and context menu as file referenced in the Finder menu item slide show can be found.

  In pictures preferences: general Board, there is an import: box - copy items to the photo library. Apparently, this option is enabled by default, as it was the once Photos migrate my iPhoto library. It also means that I don't have category 2 above and the menu items are gray, because there is no location of external file stored in the photo library.

  More on that here on different application.

• 765 and for Thinkpad 760XD BIOS updates are missing in driver matrix and 'use the fast path.

  BIOS update for ThinkPad 760XD and 765 all are not in the download area of Lenovo - the matrix driver , or using the fast path.

  I have found the BIOS 2.13 HXET60WW 09/12/99 hidden in the Lenovo area download by trial and error:

  The README file:

  http://download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/spsdhx60.txt

  The update of the BIOS can be found here:

  Download.Lenovo.com/ibmdl/pub/PC/pccbbs/mobiles/spsdhx60.exe

  These are versions of BIOS:

  1.00 HXET23WW 11/01/96 file not available
  1.01 HXET27WW 11/12/96 file not available
  1.02 HXET31WW 18/02/97 file not available
  2.00 HXET51WW 15/08/97 file not available
  2.01 HXET53WW 25/09/97 sytph201 README: "an error occurred during the processing of your request."
  2.10 HXET57WW 21/05/98 sytph210 README: "an error occurred during the processing of your request."
  2.11 HXET58WW 30/03/99 spsdhx58 README: "an error occurred during the processing of your request."
  2.12 HXET59WW 07/09/99 spsdhx59 README: "an error occurred during the processing of your request."
  2.13 HXET60WW 12/09/99 version README

  I submitted a request by e-mail to ask for inclusion in driver matrices.