Question of the UI thread

Similar Questions

• Question about the event thread

  Hello world

  I need to perform a lot of Http 'Get' and 'Post' requests If I'm not directly interacting with the UI (event thread), then I need to put the class managing http requests in its own thread?

  Any advice would be appreciated, thanks!

  You should not run any operation (such as an HTTP GET or POST request) blocking or no matter how long processing thread in the case. If you do, you run the risk of allowing the event queue overflow while you have this thread do something else, which will cause your app ending with the system.

  You must always start a worker for any HTTP operation thread.

• Question on the Thread

  Hi all
  
  
  Had a doubt while implementing threads, so I thought to do it erased before that I make progress. I have a method from where the new thread is called, and in the next line, I return statement.
  
  Method() {}
  
  Thread call ();
  return the declaration;
  
  }
  
  What happens here? I want to say is that the parent process ends before the child process?
  
  Thank you
  Simi

  user11138361 wrote:
  I have exactly the same meaning

  int foo() {}
  Runnable r = new MyRunnable();
  Thread t = new Thread (r);
  t.Start ();
  Return 1;
  }

  My question was if the child process runs then how will end the process (Px) parent?

  There is no child process. You create a thread, not a process.

  This point aside, I do not understand your question. The current thread and the new thread are totally independent of each other. Why wait we can't finish while the other is still ongoing?

  Note also that the parent thread is NOT the same as this method foo(). The thread doesn't necessarily stop when the foo() method only. It can, however, and I don't know why you would think otherwise.

  EDIT: My guess is that what you're really confused about is, ' how can end when foo() method one of its 'no' (in other words, the new thread) is running? The answer is that all its steps are made, even if the other thread is still ongoing.

  stage of foo () of appeal t.start () is finished. This does not mean that the new thread has finished, however. The start() method says: "create a new, + independent + execution thread and turn it on." As soon as he does that, start() is done, and now the new thread is allowed to run (or run) regardless of the current thread.

  Imagine that I have a list of chores: taking out the trash. Washing dishes; Show empty. This list is the foo() method. You are a new Thread object. After I wash the dishes, I tell you ' go to the store and buy some apples, milk, eggs, chicken and bread. " Let you do your work, and as soon as I told what to do, I continue with my duties. We do our work independently from each other, and I can't finish the chore on my list without waiting for you to come back on the store.

  Edited by: jverd March 21, 2011 11:27

• Under 'My Questions', to the question "cannot preview before printing in Windows Live Mail?", it shows a response, but when I click it, the answer is not there.

  Can't find an answer

  Under 'My Questions', to the question "can't preview before printing in Windows Live Mail?", it shows"last reply December 22, 2011 | by frank dem", but when I click it, it isn't there."

  Usermcw

  This is because it was deleted December 22, 2011. Looks that they cited just your original post, so she was removed because she had nothing to do with the thread.

• Deleted question from the Forum?

  Is someone deleting messages from this forum?

  I asked a question on the backup of the computer and the question is no longer available?

  Markus

  Hello Huaraz,

  We will investigate the removal of the thread and I see that you have created a new thread here. I went with you on your question there as well.

• Question about the strength of password

  (do not ask questions about the recovery of the password, so please do not report this thread)

  OK, I heard that the virus can change the password on a computer.

  But if you have a password very complicated (for example, one with a lot of numbers and other things), it will be more difficult/less likely for the virus to be able to change your password?

  Yes.  A strong password is, it is more difficult to crack.  For more information, see create strong passwords on the Microsoft online safety site. Boulder computer Maven
  Most Microsoft Valuable Professional

• When you try to create the new thread in a discussion forum, the browser closes and I'm back in the office.

  I tried to create a new thread in a Discussion forum.  Closing the browser window and I was back on the desktop.  I did a system restore, which not only does not solve the problem, but deleted my internet security software.  Has worked with people of tendency to reinstall the software, but I get a message tht says: «Unable to extract the installer...» ».  I have a class of the internet this week and I need this computer.  Can someone please?

  You can undo the last restoration of the system using: http://www.vistax64.com/tutorials/76256-system-restore-undo.html.  This may fix your problem with security software that has uninstalled when you did the system restore (using a date that probably existed before the installation of trend).  I don't know if it works now that you have done other things to try to reinstate the program, but it's worth a try.  I sincerely doubt that this process could help with the problem of browser (and there not so undo it reverses your efforts).

  You use Internet Explorer?  If so, please repost your question in Forum Internet Explorer: http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/threads where the IE specialists will be more than happy to help you with your problem.

  If you are using another brand of browser, please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where experts in programs other than Vista or IE will be more than happy to help you with your problem.  You can also try to go to the web site of the Explorer and contacting their technical support staff (or post on a forum if they support a).

  Only trend can help you with installation problems you encounter through their program.  Perhaps it didn't uninstall completely during the restoration of the system.  Check if the trend has a removal tool and use it to uninstall the program, then try to re - install again.  If this does not work, you will need to work with their technical support to solve the problem.

  I hope this helps.

  Good luck. Lorien - a - MCSE/MCSA/network + / A +.

• An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".

  The error was: "an existing connection was to be closed by the remote host".
  (0 x 00002746 WSAECONNRESET error code)

  The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.

  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this helps

• Blocking the UI Thread

  Hi all

  I wrote a utility class to make sure that at some point there is at most a dialog box showed and avoid duplication (this can occur because the application is made of many threads and each one can need alert the user).

  This is the code:

  public class UserDialogUtils extends Thread implements SystemListener2 {
  
      private boolean isForeground = false, isBacklightOn = false;
      private final Object screenLock = new Object();
  
      private boolean newDialogRequestPresent = false, lastDialogClosed = true,
              lastDialogResultConsumed = true;
  
      private static UserDialogUtils instance = null;
  
      private UserDialog currentDialog = null;
  
      private UserDialogUtils() {
          super();
          isBacklightOn = Backlight.isEnabled();
          isForeground = Application.getApplication().isForeground();
      }
  
      public static synchronized UserDialogUtils getInstance() {
          if (instance == null || !instance.isAlive()) {
              if (instance != null) {
                  Application.getApplication().removeSystemListener(instance);
              }
              instance = new UserDialogUtils();
              Application.getApplication().addSystemListener(instance);
              instance.start();
          }
          return instance;
      }
  
      public synchronized void popupAlert(String msg) {
          while (!(!newDialogRequestPresent && lastDialogClosed && lastDialogResultConsumed)) {
              try {
                  wait();
              } catch (InterruptedException e) {
              }
          }
          currentDialog = new UserDialog(UserDialog.DIALOG_ALERT, msg, 0);
          newDialogRequestPresent = true;
          lastDialogResultConsumed = false;
          notifyAll();
  
          while (!(!newDialogRequestPresent && lastDialogClosed))
              try {
                  wait();
              } catch (InterruptedException e) {
              }
          // int res = currentDialog.res;
          lastDialogResultConsumed = true;
          notifyAll();
          return;
      }
  
      public synchronized boolean popupYesNo(String msg) {
          while (!(!newDialogRequestPresent && lastDialogClosed && lastDialogResultConsumed)) {
              try {
                  wait();
              } catch (InterruptedException e) {
              }
          }
          currentDialog = new UserDialog(UserDialog.DIALOG_YES_NO, msg, 0);
          newDialogRequestPresent = true;
          lastDialogResultConsumed = false;
          notifyAll();
  
          while (!(!newDialogRequestPresent && lastDialogClosed))
              try {
                  wait();
              } catch (InterruptedException e) {
              }
          int res = currentDialog.res;
          lastDialogResultConsumed = true;
          notifyAll();
          return res == Dialog.YES;
      }
              // Implements method from SystemListener2
      public void backlightStateChange(boolean on) {
          synchronized (screenLock) {
              isBacklightOn = on;
              screenLock.notifyAll();
          }
      }
          // Called by main UIapp when switching fgd/bkgd
      public void setForeground(boolean isForeground) {
          synchronized (screenLock) {
              this.isForeground = isForeground;
              screenLock.notifyAll();
          }
      }
  
      public void run() {
          while (true) {
              synchronized (instance) {
                  while (!(newDialogRequestPresent && lastDialogClosed)) {
                      try {
                          wait();
                      } catch (InterruptedException e) {
                      }
                  }
  
                  newDialogRequestPresent = false;
                  lastDialogClosed = false;
                  currentDialog.manage();
  
                  notifyAll();
              }
          }
      }
  
      public synchronized void dialogClosed(UserDialog closedDialog) {
          if (closedDialog == currentDialog) {
              lastDialogClosed = true;
              notifyAll();
          } else {
              // shouldn't ever happen
          }
      }
  
      private class UserDialog {
          public static final int DIALOG_STATUS_SHOW = 1;
          public static final int DIALOG_INFORM = 2;
          public static final int DIALOG_ALERT = 3;
          public static final int DIALOG_YES_NO = 4;
          public static final int DIALOG_OK_CANCEL = 5;
  
          private int type = 0;
          private String msg = null;
          private int millis = 0;
  
          private int res = 0;
  
          public UserDialog(int type, String msg, int millis) {
              super();
              this.type = type;
              this.msg = msg;
              this.millis = millis;
          }
  
          public void manage() {
              synchronized (screenLock) {
                  while (!(isBacklightOn && isForeground)) {
                      try {
                          screenLock.wait();
                      } catch (InterruptedException e) {
                      }
                  }
  
                  UiApplication.getUiApplication().invokeLater(new Runnable() {
                      public void run() {
                          switch (type) {
                          case DIALOG_STATUS_SHOW:
                              if (millis > 0)
                                  Status.show(msg, millis);
                              else
                                  Status.show(msg);
                              break;
                          case DIALOG_INFORM:
                              Dialog.inform(msg);
                              break;
                          case DIALOG_ALERT:
                              Dialog.alert(msg);
                              break;
                          case DIALOG_YES_NO:
                              res = Dialog.ask(Dialog.D_YES_NO, msg);
                              break;
                          case DIALOG_OK_CANCEL:
                              res = Dialog.ask(Dialog.D_OK_CANCEL, msg);
                              break;
                          default:
                              break;
                          }
                          dialogClosed(UserDialog.this);
                      }
                  });
  
              }
          }
  
      }
  
  }
  

  I can't understand how and why, but sometimes it can cause a blockage (I believe that the lock of the event).

  Essentially, in some cases, UIApplication will never call the executable content in the UserDialog instance manage() method.

  This means that, when it happens, the screen freezes as if it were before a popup methods (UserDialogUtils.getInstance () .popupAlert ("Please do not freeze")) was called.

  What Miss me?

  Thank you

  Luca

  I appreciated that the question you were worried but not specifically related to the UserDialogUtils code, but I thought there is no point in studying something depends on the UserDialogUtils until UserDialogUtils is processing properly.

  I could be missing something, but isn't sync it on methods prevents actually several Threads displaying dialog boxes at the same time?

  You only need the loop because manage() returns before the dialog box was dismissed.  And this happens because you use invokeLater and not invokeAndWait.  Your dialogs block the Thread event at some point, I'm not sure that your workaround (loop) here is really necessary.

  But to be honest, I haven't looked hard in the code.

  In any case, I have the answer to your problem I think.

  fieldChanged() is called on the event Thread.  If you hold the event walking till it ends.  Now in your treatment, that you never come back of popupAlert until something got the wire of the event, specifically the dialog box.  If you are in a bind.

  Short answer, do not call the methods in UserDialogUtils while holding the thread of events.

• Application with the background thread

  IDE: Blackberry JDE Version 4.5.0.7

  Simulator: About us - Smartphone BlackBerry 2.9.0.52 Simulator

  Model: BlackBerry Curve 8310 smartphone

  Hi all

  I have an application that, after installation on the BlackBerry must be selected in the application menu only once and will run continuously until it is uninstalled from the device. Code looks like this: -.

  public final class app_name extends Application {   private BackGroundThread _thread;
  
     public static void main(String[] args) {        app_name app = new app_name();        app.enterEventDispatcher();    }
  
      public app_name() {        _thread = new BackGroundThread();         _thread.start();    }
  
      private class BackGroundThread extends Thread {
  
           public BackGroundThread() {            /***initialize parameters in constructor*****/        } 
  
           public void run() {             while(true) {             /*****do stuff using parameters*****/             sleep(10000);           }         }     }}
  

  This code works well. Now, I have to add a user interface that allows the user to change some of the parameters that are used in the thread.

  (1) as a first step, I have to change application to UiApplication to allow pushScreen to use. Since it's a subclass, I would have no problem with this law?

  (2) to get the UI goes, my plan was to declare another class (extends screen) within app_name. What is the right way to go?

  (3) parameters must be manipulated such that there is no risk of conflict of data didn't pack the thread class and the class screen try to access settings at the same time. So using the semaphore will be a good strategy?

  (4) any other questions I may be brought to face or is it better to do this quite differently? I wonder if the instance of the thread class will actually be run side-by-side in the user interface and if the user interface to stop smoking will actually affect the Backgorund thread anyway. It might be better to create a completely separate application for the bit of UI that can access this application settings, but I don't know how to do this.

  My apologies for the long post. Any help will be greatly appreciated.

  Hello

  PersistentObject is synchronized, so that it will not conflict data. You can search for "BlackBerry_Application_Developer_Guide_Volume_2" which has the details of the store persistent in the section "persistent data storage.

  Thank you.

• Question no doubt multi-threaded

  Greetings!

  Don't know what kind of problem I face, but still very interesting.

  I have a UiApplication who starts a thread to listen to incoming SMS and respond automatically. This same class implements PhoneListener as below:

  public class SMSSenderReceiver extends Thread implements PhoneListener {
  
      private static DatagramConnection _dc;
      private static int _callIdIncoming;
      private static int _callIdAnswered;
      public static String _phoneNumber;
  
      static {
      try {
          _dc = (DatagramConnection) Connector.open("sms://");
          } catch (IOException e) {
              System.out.println(e);
          }
      }
  
      public SMSSenderReceiver() {
          super();
          _callIdIncoming = -1;
          _callIdAnswered = -1;
          Phone.addPhoneListener(this);
      }
  
      public void run() {
          try {
              for (;;) {
                  Datagram d = _dc.newDatagram(_dc.getMaximumLength());
                  _dc.receive(d);
                  String address = d.getAddress();
                  if (address.startsWith("//")) {
                      address = address.substring(2);
                  }
                  String answer = getResponseByPhone(address);
                  if (answer != null) {
                      answer.getBytes();
                      Datagram returnpacket = _dc.newDatagram(_dc
                              .getMaximumLength());
                      returnpacket.setAddress(d.getAddress());
                      returnpacket.setData(answer.getBytes(), 0, answer.length());
                      _dc.send(returnpacket);
                  }
              }
          } catch (IOException ioe) {
              System.out.println(ioe);
              Phone.removePhoneListener(this);
          }
      }
  
      private static String getResponseByPhone(final String phone) {
          TextResponses tr = TextResponses.getInstance();
          MultiMap mm = tr.getResponses();
          Enumeration valuesEnum = mm.keys();
          while (valuesEnum.hasMoreElements()) {
              String element = valuesEnum.nextElement().toString();
              if (mm.containsValue(element, phone)) {
                  return element;
              } else {
                  continue;
              }
          }
          return null;
      }
  
      //  public void missedCallSMSSender(final String address) {
      //      try {
      //          if(_callIdAnswered != _callIdIncoming){
      //              //              if (address.startsWith("//")) {
      //              //                  address = address.substring(2);
      //              //              }
      //              String answer = this.getResponseByPhone(address);
      //              if (answer != null) {
      //                  answer.getBytes();
      //                  Datagram returnpacket = _dc.newDatagram(_dc
      //                          .getMaximumLength());
      //                  returnpacket.setAddress("//" + address);
      //                  returnpacket.setData(answer.getBytes(), 0, answer
      //                          .length());
      //                  _dc.send(returnpacket);
      //              }
      //              _callIdAnswered = _callIdIncoming = -1;
      //              //_phoneCallsHash.remove("" + _callIdIncoming);
      //          }
      //      } catch (Exception e) {
      //          System.out.println(e);
      //      }
      //  }
  
      public void callIncoming(final int callId) {
          if(_callIdIncoming != callId){
              UiApplication.getUiApplication().invokeLater(new Runnable(){
                  public void run() {
                      _callIdIncoming = callId;
                      PhoneCall phoneCall = Phone.getCall( callId );
                      _phoneNumber = null;
                      try {
                          _phoneNumber = phoneCall.getDisplayPhoneNumber();
  
                          String tempNumber = null;
                          for(int i = _phoneNumber.length() -1 ;i >= 0; --i) {
                              if(Character.isDigit(_phoneNumber.charAt(i))){
                                  tempNumber = _phoneNumber.charAt(i) + ((tempNumber == null) ? "" : tempNumber) ;
                              }
                          }
                          _phoneNumber = tempNumber;
  
                          System.out.println("**bleep** Phone Number: " + _phoneNumber);
                      } catch(NullPointerException npe) {
                          _phoneNumber = "0";
                          System.out.println("NULL!!!!" + npe);
                      }
                  }
              });
          }
      }
  
      public void callAnswered(int callId) {
          _callIdAnswered = callId;
      }
  
      public void callDisconnected(int callId) {
          UiApplication.getUiApplication().invokeLater(new Runnable(){
              public void run() {
                  //System.out.println("**bleep** Phone Number: " + _phoneNumber);
                  //SMSSenderReceiver.this.missedCallSMSSender(_phoneNumber);
                  String address = _phoneNumber;
                  if(_callIdAnswered != _callIdIncoming){
                      //                  if (address.startsWith("//")) {
                      //                      address = address.substring(2);
                      //                  }
                      String answer = getResponseByPhone(address);
                      if (answer != null) {
                          answer.getBytes();
                          try {
                              Datagram returnpacket = _dc.newDatagram(_dc.getMaximumLength());
                              returnpacket.setAddress("//" + address);
                              returnpacket.setData(answer.getBytes(), 0, answer
                                      .length());
                              _dc.send(returnpacket);
                          } catch(Exception e) {
                              System.out.println(e);
                          }
                      }
                      _callIdAnswered = _callIdIncoming = -1;
                  }
              }
          });
      }
  ...
  

  The goal is to send an SMS for each missed call. Thus, on incomingCall while I get caller Id and phone number assign them static variables. If the call is answered I catch the call id also. Once the call is disconnected I just check the id of appeal responded and id entering in case they differ from each other, I got a call from miss and I send a SMS.

  The problem is once the callDisconneted is called, I don't have the value of _phoneNumber. On incomingCall I could see the number, but not after all. Why? Seems to be a fundamental basis on the multi-thread.

  Anyone know what is happening?

  Thanks in advance!

  --

  This question probably has to do with the fact that the listener to call is actually coming in your code on the phone application thread. Each application gets a copy separate from the static context. As a result, you won't see the same data when you access this variable in your own application process.

  You can probably here either: (a) send yourself a form of global event listener call, then pick up the event in your own process, or (b) use the runtime store to keep the value so that the two processes can * see * it.

• Dial the two thread simultaneius http

  In my application I want a main (UI) Thread and two other thread that runs at the same time, now in both the wire I want HttpConnection appeal, so it is possible for both the thread do HttpCall?

  I want to know - is it possible?

  Because if one thread calls Http between another thread also do Http call connection so that it will give the error as "Stream already open" because the first thread was opened the stream and before the closing of the first stream son second thread will open the stream, so please help me on this...

  Thank you

  There is nothing on the Blackberry that will prevent both two threads made http URLs of connections to the same (or other) at the same time.

  So the answer to your question is 'Yes it is possible. "

  Ok?

• Question of the NEX Time Lapse app with fashion bed and the rising of the Sun.

  NOTE: this problem was first mentioned by me in the other thread about the app of time works do not (a thread "solved").  Wanted to separate this issue in its own thread so I hope this is seen and worked on...

  NEW PROBLEM?  I starts with the NEX - 5R regular automatic mode 'Greens', start the application of time and run in mode 'Sunrise' .  I then begin firing sequence before the sun rises.  It takes about 40mins (I use all the parameters of "sunrise" by default) and when I check the results I see that the exhibition was "locked-in" with the first shot taken.  That means the video created in the device starts properly exposed, gets brighter as the Sun starts to come will then completely saturated white until I see clouds of beautiful Sunrise 'red '!

  What is the way in which the mode of "Sunrise" is supposed to work?  I'm doing something wrong?  I think that with the changes in the brightness of the scene, the camera would be re-meter each image taken on not to bleed the scene as the sun rises.

  Everyone knows this too?

  Moderator: you can report?  (BTW: the Sunset function does the opposite for me also: scene will just completely black too fast as the sun sets.)

  Thank you

  Mike

  At the time of writing, we have no information if there is an update for this application. We can refer to this post and try the steps to see if this will fix the problem.

  If this post answered your question, please mark "accept as a Solution.

• Restart causes the 'system thread unhandled exception '.

  Freezes in Windows 8.  Restart causes the 'system thread unhandled exception '. Windows restores successfully to earlier restore point start, but the questions is recurring.

  3 crashes so far because the computer was purchased at the end of February, 2014.

  All 3 minidumps are available at:

  https://onedrive.live.com/redir?RESID=7B6D641161EAE33%211120

  This disturbs my work whenever I need to reactivate my license of office until I can get back to where I was.

  How can I avoid this problem happen again and still be able to fully use my computer?

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
  It is a very common bugcheck.  Usually the PIN address of exception
  the driver/function that caused the problem.  Always note this address
  and the date of the picture link / driver that contains this address.
  Some common problems are the exception code 0 x 80000003.  This means a hard
  coded breakpoint or assertion was hit, but this system has been started
  / /NODEBUG.  It is not supposed to happen as developers should never have
  breakpoints coded hard in retail code, but...
  In this case, make sure a debugger must be connected and the
  system startup/DEBUG.  This will we will see why this breakpoint is
  happening.
  Arguments:
  Arg1: ffffffffc0000005, unhandled exception code
  Arg2: 0000000000000000, the address that the exception occurred at
  Arg3: fffff880031a2938, address of Exception report
  Arg4: fffff880031a2170, address of the context record

  USTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  Nom_processus: System

  CURRENT_IRQL: 0

  Error_code: (NTSTATUS) 0xc0000005 - the instruction at 0 x % lx 08 referenced memory at 0 x % 08 lx. The

  memory could not be %s.

  EXCEPTION_PARAMETER1: 0000000000000008

  EXCEPTION_PARAMETER2: 0000000000000000

  WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff800d4fd3168
  Unable to get nt! MmPoolCodeStart
  Unable to get nt! MmPoolCodeEnd
  0000000000000000

  FOLLOWUP_IP:
  nvkflt + 37 c 2
  fffff880'03e187c2?              ???

  FAILED_INSTRUCTION_ADDRESS:
  + 37 c 2
  00000000'00000000?              ???

  STACK_TEXT:
  fffff880 '031a2b78 fffff880' 03e187c2: fffffa80'0d67d950 fffff880 '031a2e00 fffffa80' 0d67d950

  00000000'00230047: 0 x 0
  fffff880 '031a2b80 fffffa80' 0d67d950: fffff880 '031a2e00 fffffa80' 0d67d950 00000000'00230047

  00000000' 00000000: nvkflt + 0x37c2
  fffff880 '031a2b88 fffff880' 031a2e00: fffffa80'0d67d950 00000000'00230047 00000000'00000000

  00000000 00000001': 0xfffffa80'0d67d950
  fffff880 '031a2b90 fffffa80' 0d67d950: 00000000'00230047 00000000'00000000 00000000'00000001

  00000000' 00000000: 0xfffff880'031a2e00
  fffff880 '031a2b98 00000000' 00230047: 00000000'00000000 00000000'00000001 00000000'00000000

  fffff8a0'05c3b700: 0xfffffa80'0d67d950
  fffff880 '031a2ba0 00000000' 00000000: 00000000'00000001 00000000'00000000 fffff8a0'05c3b700

  fffff880'031a2c78: 0 x 230047

  nvkflt.sys

  Driver Description: Filter driver NVIDIA Graphics

  Driver update site: http://www.nvidia.com/Download/index.aspx

  Make sure all your display drivers are updated and if this does not work, uninstall and perform a clean installation.

  Guide on how to install the NVIDIA Windows 7/Windows Vista display driver (even in windows 8)

  http://NVIDIA.custhelp.com/app/answers/detail/A_ID/2900/~/guide-on-how-to-install-the-NVIDIA-display-driver-under-Windows-7%2Fwindows-Vista

  Good luck

• Quick questions on the CC student kit

  I tried to search the FAQ or customer support, but couldn't really find something where I could just after a small question about the recognition of things so... If you know what I'm looking for already feel free to guide me where to look for it.

  I was therefore interested to the kit of the CC student which includes all applications a year. (think it says about 2000 Swedish kronor, which is roughly around 200 euros).
  And so I saw was one of the best idenfications using your email from the school which includes stuff like ".edu".  The problem is that I have one, but only use us it as a registering or connect the credentials for our orders online. If this isn't an email that I can receive emails since then, so I'm just wondering if all I had to do was use it as a registering or the legitimacy that I am a student, or if it must be signed using this specific e-mail. I could talk about technology in school and get it set up, but he mentioned that it is somewhat lengty and or boring process then advised me to see if it was as a registering first egible before again us.

  If you know where I could have found this info in FAQ or similar stuff please let me know, otherwise I'd like a few quick answers to this. See you soon!

  Hi Nyom,

  I order to buy creative cloud subscription, you must have a valid email ID where you can receive by e-mail sent by Adobe.

  Given that the address you have is not where you can send or receive e-mails, you can go ahead and use a personal e-mail ID.

  If you purchase the subscription using an ID, you may be asked to provide additional proof of eligibility.

  Please see the shared document:student software discounts, the eligibility of the student. Adobe

  Please update the thread in the case of all other applications.