Protection of execution for Dat WMI

Similar Questions

• Table of indexes for execution of data

  Hello

  I have data running in real time, and I'm reading some points with Index Board. This is for data that are already collected, or y at - it another way I can collect data that are powered?

  Thank you

  Andrea

  
  

• Download Itunes on my laptop just before, it starts to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation

  original title: Itunes and DEP

  While downloading Itunes on my laptop right before you start to install, I get a message saying that windows Explorer stops because the prevention of execution of data has stopped installation.  Is there any solution for this?  I'd like to install itunes on my laptop.

  Hi Steve681229,

  Thank you for using the Microsoft Answers forum.  Here's what worked for someone else.  Thanks Kevin

  Hi thrivenformore,

  Please use the forum for Support of Vista,

  You could try to add iTunes to the DEP exception list.  However, this behavior is not normal.  Go to the support forum of Apple for iTunes for Windows, search on DEP.  There should be a thread "How can I turn off DEP for iTunes?" or it Prevet planting iTunes? "which provide troubleshooting steps you might want to try before adding it to the list of exceptions."

  How to add the program to the DEP exception list:

  1. Press Start, right click on computer and select Properties.
  2. in the window that appears, click Advanced (on the left panel) system settings.
  3. in the first box that says Performance, click on the settings button.
  4. in the window that opens, click the Data Execution Prevention tab at the top.
  5. There should be a box of exceptions in the middle of this window. Click the Add button and navigate to the C: drive, then Program Files, then the iTunes folder, and then choose the iTunes exe.
  6. Add the exception, and then click OK in the window of the DEP.

  Hope this helps, Kevin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• This show is phishing for data.

  This show is phishing for data...

  Hi Charles,

  Phishing (pronounced "fishing") is a type of online identity theft. It uses the e-mail and fraudulent Web sites designed to steal your personal data or information such as credit card numbers, passwords, data, account or other information.

  I suggest you try the steps from the following link:

  Scams by e-mail or web: how to protect yourself (this to do if you think you were scammed)
  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• How to protect my plugin (for the player) before the application of Adobe

  Hello

  I would like to know how can I protect my plugin technology before showing it to Adobe employees through the application process. Is there a risk of having the stolen idea? Thank you

  You need ot the document than the parts where it interacts with the drive itself.  We want to make sure that you are not adding features to the reader that are already in Acrobat.

  From: Adobe Forums [email protected]<>[email protected]>

  Reply-To: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Date: Wednesday, October 26, 2011 04:30:47-0700

  To: Leonard Rosenthol [email protected]<>[email protected]>

  Topic: How to protect my plugin (for the player) before the application of Adobe

  Re: How to protect my plugin (for the reader) prior to application of Adobe

  created by DevAcrohttp://forums.adobe.com/people/DevAcro> in Acrobat SDK - see the discussion complete onhttp://forums.adobe.com/message/3990776#3990776

• SetCtrlVal on "control of the string" request execution 'int' data

  Hello

  We at KPIT Cummins use LabWindows for one of our automotive projects. We have a GUI with multiple tabs and one of our boxes of string text is emerging the error (also attached jpeg) below.

  FATAL ERROR: 'Temp.c', line 2642, col 38, id thread 0x00000F4C: invalid argument type: found "pointer to char", should "int".

  We tried to debug this project, and we believe that the line which gives us a question is:

  ret_val = SetCtrlVal (h_Tab_Intgd [INTGD_CFG_DATA_TAB], INTGDTAB_ACCXSCALE, aa_uc_Temp_Array);

  where,

  h_Tab_Intgd [INTGD_CFG_DATA_TAB] is an array of handles of the form (stores all handles to the tabs)

  INTGDTAB_ACCXSCALE is the name of the string object (exactly the name of constant as it appears in the file .h created constant LabWindows GUI)

  aa_uc_Temp_Array is an array of characters. ("0.000000\n" which currently occupies)

  There is another form in our code with similar functionality, but with a different constant ID... and the SetCtrlVal seems to work for this form. We do not understand why it gives an error of execution for this particular form.

  The code in this project is a big piece of code, and we cannot currently share the project because of a confidentiality clause. You can help us find exactly the problem with what little information shared us?

  Thanks for the snippet of code... the error was in the tab page handles... we are grateful for your help.

• How to connect computer lane ina for data entry work

  I want to connect computer in my office for data entry so culd anyone help me to solve this

  Narendra salvation,

  You can ask your question in the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/home

  Thank you.

• How to set up a timetable to VI for date selection?

  Hi all

  I need to implement a calendar in my VI for date selection to view historical data like we find on the Web sites of travel agencies?

  & also guide me how to get this kind of calendar...

  Please guide me...

  Thanking you,

  See the other thread I posted...

• Branch 5505, 1 circuit ISP, Dual - peer VPN Configuration for Data Center &amp; Track Options

  Hi all

  I have a data center with two lines of ISP redundancy and two ASA 5520 for redundancy VPN to my branches.  Each of my branches has 1 ASA 5505 with a base license and 1 ISP circuit. Currently all my VPN tunnels are built for data center main circuit ISP only, so if one goes down, I'm toast.  I need to fix this. Problem is, I don't know how I can control failover on 5505 with 1 single line branch.  Please see my picture for an example of how he looks at it right now.

  So the problem is that the data center LAN my branch has to go to is identical regardless of which circuit of data center is in the. And I know the ASA rules say only 1 VPN tunnel can be active at a time if flow are the same.  So in this case, I know you usually do:

  card crypto outside_map 1 set 12.x.xxx.20 50.xxx.xx.190 counterpart

  and then configure route followed to control when cut down the primary counterpart and turn back up by peers. But where I have only 1 ISP on the side of the branch, I'll only have 1 default route: route outside 0.0.0.0 0.0.0.0 3.3.3.2 1, will be used that the active end counterpart is the primary or the secondary data center. Also, since I did not have a second track, I can't configure followed on the main road with an SLA that defines the trigger conditions, because there is nothing to ensure the follow-up of the routing.

  How is - a would handle a situation like this? Are there other features that can be taken off the roads?  I really need to be able to define "num-package 5 ' in ALS so my sites are not beat all day, but once again, without something to follow, I can't really set up a meaningful SLAS.  Any help is appreciated.

  Thanks for the additional explanation. It helps to clarify your environment. EIGRP running on the Remote would be a nice option, but I'm not sure that it is supported on the SAA. I ran EIGRP to remote peers using IOS routers (using the two ACCORD with IPsec and VTI tunnels tunnels) and it was very effective. But on the SAA, I believe that we must seek an alternative.

  It seems to me that using reverse road Injection as part of your VPN site-to-site should work. With IPP the ASA inserts a static route to remote resources when the VPN tunnel is negotiated and traffic can flow. If you redistribute the static in EIGRP EIGRP then must learn the ways of any ASA a currently active tunnel. And who should provide the dynamic rollover you need.

  HTH

  Rick

• Oracle will consider the creation of a day 2 hands on the documentation for Data Guard?

  Hello

  Oracle will consider the creation of a documentation of son of hands 2 day for Data Guard?

  There is already an OTN 2 day of CARS and performance tuning documentation.

  Thank you

  Updated - she sent the link to this topic for the Product Manager Data Guard.  As a result, Oracle may or may not consider creating 2 days hands on Data Guard documentation, but no doubt they consider at least considering creation day 2 hands on the Data Guard documentation.

• How to write a script for date get to the Clipboard

  Hi experts,

  How to write a script for date get to the Clipboard.

  the date format will be like this:

  05 - may

  respect of

  John

  Thanks guys, thanks Sanon

  I finally use the .bat doc

  like this:

  @@echo off
  for /f "delims =" % in (' wmic OS Get localdatetime ^ | find ".") "") Set "dt = %% a"
  the value "YYYY = % dt: ~ 0, 4%.
  the value "MM = % dt: ~ 4, 2%.

  If MM % is 01 set MM = January
  If % MM == 02 set MM = February
  If MM % is MM value = March 03
  If MM % is 04 MM value = April
  If MM % is 05 MM value = may
  If MM % is 06 MM value = June
  If MM % == 07 set MM = July
  If MM % is MM value = August 08
  If MM % is MM value = September 09
  If MM % is 10 MM value = October
  If MM % is 11A set MM = November
  If MM % is game MM 12 = December

  the value "DD = % dt: ~ 6, 2%.
  the value "HH = % dt: ~ 8, 2%.
  the value "Min = % dt: ~ 10, 2%.
  Set "s = % dt: ~ 12, 2%.

  Echo DD - MM HH % %% % Min | Clip

  It works

  respect of

  John

• Database is configured for Data Guard

  I'm lance a UTF8 conversion on a development database, which has been cloned from Data Guard. There is a warning in the Migration status: "database is configured for Data Guard" which is looking at DMU to determine this? The database is opened in read-write mode and it behaves like a primary database (I have the MISP scanner and run updates to address representations not valid). I would like to know what I need to update the settings.

  This prevent me to convert tables using DEC? When I try to select this option for all tables I get the message, "CDS does not support conversion method"Copy data using CREATE TABLE AS SELECT"for tables that are involved in a process like capture Oracle Streams, or apply.". Another method of conversion available for the table.

  Thank you

  Ben

  CDS checks if the DG_BROKER_START parameter is set to true.

  The problem with the ETG is independent of the Data Guard. The CDS is true for tables which:

  -are asynchronous stream capture source, or

  -update conflict managers have, or

  -DML managers have, or

  -conflict resolution settings have

  The above tables are considered to be configured for Oracle Streams and are not supported by the method of conversion of DEC. This is because the DEC method creates a copy converted the table and falls from the original. The CDS is not able to move the configuration information from the old table to the new flow.

  Thank you

  Sergiusz

• Publish with the help of af: Message for date validations ADF

  Hi Experts,

  I get the following error message when you use adf date using af: message instead of a Note window. As you can see int right below the screenshot, what happens is invalid when date is entered once, while a single error message appears below the component, but when the user clicks on the date picker icon after that every time a message is added under each time as shown below.

  

  I use Jdev 11.1.1.5. Please let me know if there is a solution for this using java script or a property in jsf.

  < af:inputDate label = 'test' id = 'dat' >

  < / af:inputDate >

  "< af:message id ="m1"for =": dat ">"

  The solution to the above problem is,

  function errorMessClear (evt) {}

  source var = evt.getSource ();

  AdfPage.PAGE.clearMessages (source.getClientId ());

  }

• Connection verification failed for data source - mysql.jdbc.Driver

  I get this message when you try to add a mySQL (don't ask) database in CF Admin checking the connection failed for data source: shownets java.sql.SQLException: no suitable driver available for shownets, please don't check the configuration in the file resources, pilot error: com.mysql.jdbc.Driver

  
  The root cause was that: java.sql.SQLException: no suitable driver available for shownets, please don't check the configuration in the file resources, pilot error: com.mysql.jdbc.Driver I tried all sorts of messages instructions and nothing seems to work.  It's on my 32-bit platform. Tryng to get out all the bugs before I installed the 64-bit version.
  
  TNX a

  It seems that you have recently installed Coldfusion. I say this because recent versions of Coldfusion no longer ships with JDBC to MySQL driver. You must therefore download and install it yourself.

  To do this, go to the download page of the MySQL JDBC driver. Select the platform independent as a platform connector. Download the ZIP file independent of the platform mysql-connector-java - x.x.xx.zip. (x.x.xx represents the version number)

  Extract the ZIP file. Open the folder that results and search for the driver. It is a JAR file called mysql-connector-java - x.x.xx - bin.jar (x.x.xx represents the version number). Copy the file in the directory lib to Coldfusion.

  Restart Coldfusion. Voila - you're ready to go.

• How can I configure a guest of execution for a web forms.

  where can I find details on how to set up a guest of execution for a web forms.

  SPTR is created on the rules or rules calc Manager or business, if you want to understand more, first of all, go to http://docs.oracle.com/cd/E17236_01/epm.1112/hp_admin/frameset.htm?ch06s09.html
  There is also a link from this page on run time application.

  See you soon

  John
  http://John-Goodwin.blogspot.com/