This show is phishing for data.

Similar Questions

• converter shows wrong size for data warehouses

  The size of data warehouses is not updated in the converter. I made some space on data warehouses but converter displays always old size. all ESX hosts show the right size, so that the converter look at... How do update you?

  Nevermind, I reread the hosts and it shows correct now.

  Moderators or OP, you can mark this thread as answered because it appears that OP has solved the problem.

• Need help! Just got a message window on startup, which reads "path of data execution: to help protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.» Can anyone help?

  I just got an error message at startup, which reads: execution of data path: to protect your computer, Windows has closed this program: name: request for logon Userinit, Publisher: Microsoft.  My pc is under Windows XP SP2. I think that different multiple verisons of software "virus protection" began to appear in the Explorer. I know that they do not belong on my computer. I tried to close them, but they just kept moving forward. I'm trying to find some help to solve the problem. Moreover, when I close the window of Data Execution Prevention error message, I have my bottom, no other other icons for one of my programs are on the screen. Help... This can be corrected?

  Thanks in advance.

  Carter2009,
  If you started having 'Magical' Antivirus programs to appear on your system that you do not install, then you are infected.  Some people may be painful to remove, to others not so much.  I recommend http://www.malwarebytes.org/ for malware protection and http://www.microsoft.com/Security_Essentials/ for antivirus.

  But now you're in a bit of a place.  I download Malware Bytes and put it on a USB key.  Then see if you can boot in safe mode and run MalwareBytes.  If you're not in safe mode, take a look at this: http://support.microsoft.com/kb/318027

  Hope these helps. QQ learn manage!

• Always pop-up - blocker does not block s pop up this show up in new tab or that I was.

  I am running the latest firefox.

  Add it on the of I'm running are the plu adblocker and adguard and ran the announcement of block

  I'm under advast and until this problem has started I was running it on my firefox as well too.

  I already ran Microsoft scan, System Advast, Advast startup scan full scan, I scanned the Fire Fox. As well as Adcleaner as cccleaner to.

  I am running 7 pro 64-bit Windows computer and everything on this front is up-to-date.

  I have a few other browsers on my computer. (Internet explore and Crome) Both came with my computer when I got it. Out of these two, I know that Crome does the same just only at the beginning of use. But I use it only when I run a browser with multiple game accounts.

  I have also updated firefox more than once, and always the same questions, to show the top. At first, I thought it was just a site when it turns out he did for others as well.

  I have no error message or anything.

  The image is of my extension.

  I would have responded earlier. But I had someone look in the computer and check it out. They could solve this I spent time yesterday, making sure it was still very good. Thank you nevertheless.

• I bought a new iPhone SE. My iCloud account still shows my old iPhone data use. How can I erase it from my ICloud account?

  I bought a new iPhone SE. My iCloud account still shows my old iPhone data use. How can I erase it from my ICloud account?

  Do you mean that you see your old data use on the new iPhone?

  Go to settings > cellular > [scroll down to] Reset Statistics

  Otherwise, where exactly do you see this use?

• All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY?

  All of a sudden, after a update of firefox, I get "this connection is untrusted" for Facebook, no matter if I use http: or https:, WHY? Here are all the details of the error message:

  This connection is Untrusted

  You asked Firefox to connect safely to facebook.com, but we cannot confirm that your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove that you're in the right place. However, the identity of this site cannot be verified.
  What should I do?

  If you normally connect to this site without problems, this error can mean that someone is trying to impersonate the identity of the site, and you should not continue.

  This site uses HTTP Strict Transport Security (HST) to specify that Firefox didn't connect safely. As a result, it is not possible to add an exception for this certificate.

  Facebook.com uses an invalid security certificate.

  The certificate is not trusted because the issuer certificate is unknown.

  (Error code: sec_error_unknown_issuer)

  (Also included a screenshot).

  COR - el said

  You can check the date and time and time zone in the clock on your computer: (double) click on the clock icon in the Windows taskbar.

  • https://support.Mozilla.org/KB/secure+connection+failed

  You can retrieve the certificate and check details such as WHO issued the certificates and the expiration dates of certificates.

  • Click on the link at the bottom of the error page: "I understand the risks".
  • Let Firefox recover the certificate: "Add Exception"-> "get certificate".
  • Click on the button "View" and inspect the certificate and the Coachman, who is the issuer.

  You can see more details like the intermediate certificates that are used in the Details tab.

  If you cannot inspect the certificate by "I understand the risks", then try this:

  Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:

  • chrome://pippki/content/exceptionDialog.XUL

  In the field location type and paste the URL of the Web site

  • retrieve the certificate via the button 'Get certificate '.
  • Click on the "view..." button. "to inspect the certificate in the certificate display

  Check which is the issuer of the certificate.

  You can get more details like the certificate chain in the Details tab of the certificate display.

• This download is available for a Tablet Asus Android and what is the latest version/version?

  I can't access my account of electricity because my Firefox version is earlier than 3.6. When I check the downloads available for my Asus tablet that runs Android, it shows the version of Linux available and when I look for the Android version, it indicates that it is for phones using Android. The (mobile) phone work on my Asus Tablet and what the latest version/version?

  You can use the "On Firefox" button in preferences to check which version of Firefox you are using.

  If you try to access a web site that requires Firefox 3.6, you can try to install the Add-on "Can" and then go to the Firefox preferences and change the 'User Agent' option to 'desktop Firefox. This will make Firefox for Android pretending to be Firefox 3.6.

• HP COMPAQ 8200 Elite Micro Tow: Can you tell if this system has slots for SSD or hdd adapter necessary - & gt; SSD?

  Can you tell if this system has slots for SSD or hdd-> ssd adapter need?

  WIN INITIAL 7pro

  i5-4-core - 16GB - RAM - fresh install [new 1 TB HDD] 8.1pro win 10pro Win

  HP COMPAQ 8200 Elite Micro Tower

  P / N:XY139EA #AB7

  PURCHASED 07/03/2012

  For w10pro c: / recommend reinstall to ssd or migrate ssd or even is...?

  SSDS all have sons the same size and holes threaded on the bottom and sides.  They all use the same fine metric threads live short (short, so they don't lower).  These screws must come with the adapter, and I live in general using the lateral holes.  Parts of the adapter have threaded, 3 holes and you will use the back ahead and away from those for channels of the drive Bay.  If you look at each side of a standard 3.5 "HDD, you will see the same same spacing holes.

  Some jobs need the SSD to shift to the left so the orientation of the SSD SATA power and data ports match exactly where they would be if the current drive was a 3.5 "HARD drive clutter.  An example is the drive in a Z620 of drawers which accept 3.5 form factor devices "and slides of drawers in the deep part of the case and automatically mesh with ports of power/data SATA back inside.

  Jobs that fuel just a loose cable and the data cable for the SSD is really doesn't matter much if the SSD is an adapter which keeps it more centered or offset to the left.  I've seen cases where a disk HARD 3.5 "given in the lower Bay and a centered SSD is in the upper drive Bay and there was nearly not enough cable length to reach easily shifted left for drives staggered in the Center.  You can see in the photo below that the Garland of feeding on the HARD drive has two unused SATA power below connectors, and there is not a lot of room between them.

  The card you chose seems good... solid metal.  For the HP 8200 Elite CMT I have access to screws 4 total special 6-32 UNC silver HP threaded screw threaded back ahead and away from the screw holes on both sides of the adapter, and then you use the extraordinary end threads metric short screws mentioned above to fix the SSD to the adapter, as shown in the pictures of Amazon.  These HP silver screw 6-32 no metric I'm talking using Torx or flat screwdriver and their leaders are trained to slip into the channels of the drive Bay.

  There are also other designs which are designed specifically for some HP workstations that include mounts insulation rubber with the sliding mechanism.  I don't think you have that... Here is a picture of eBay one of the 8200 Desktop Elite CMT demonstrating the existence of space on the left for 8 of these silver screw to store, which 4 are missing and used on 3.5 "single drive, you see there.  Don't throw those... they are not something, you can go to Ace hardware and buy.

  

• How to connect computer lane ina for data entry work

  I want to connect computer in my office for data entry so culd anyone help me to solve this

  Narendra salvation,

  You can ask your question in the TechNet Forums: http://social.technet.microsoft.com/Forums/en-US/home

  Thank you.

• How to set up a timetable to VI for date selection?

  Hi all

  I need to implement a calendar in my VI for date selection to view historical data like we find on the Web sites of travel agencies?

  & also guide me how to get this kind of calendar...

  Please guide me...

  Thanking you,

  See the other thread I posted...

• Can't get on to the website of Irish supporters League that it closed for maintenance three days ago while my friends are on the websight it shows still closed for someone could please

  Can't get on to the Irish League supporters websight that it closed for mainenance three days ago while my friends are on the websight it shows always closed for me could someone please help

  Hi colinsewell,

  1. what browser do you use?

  2 are you able to access other Web sites correctly?

  If you use Internet Explorer, you can follow these methods & check if it helps.

  
  Method 1

  You can follow this link and check if it helps.

  Some sites Web may not behave as expected in Internet Explorer

  
  Method 2

  You can also add the Web site to the trusted sites in Internet Explorer and check to see if you are able to access properly.

  For more information, refer to this link: How to use areas of security in Internet Explorer

  Hope the helps of information.
  Please post back and we do know.

• Can I watch a show that is currently recording in Windows Media Center since the beginning of this show?

  I use Windows Media Center to record TV shows.  Suppose I record a show in an hour at 6:00, and I decide to 06:10 I want to watch this show from the beginning. (while it's recording)

  Is it possible to do this in Windows Media Center?  The media file of the recording of the show is not accessible until it is 100% finished recording.

  I am looking for a way to watch a show while it's recording, but to do so since the beginning of the show (after the start of recording)

  Thank you

  Hello

  Im sure that you can watch TV recordings during live TV recording, but you can't watch a program during its course of recording.

  See also:

  This management recorded TV in Windows Media Center: frequently asked questions

   

  http://Windows.Microsoft.com/en-us/Windows-Vista/Managing-recorded-TV-shows-in-Windows-Media-Center-frequently-asked-questions

• This Bios is not for your laptop!

  First I started having this massage of error at startup 'System Fan (90 b)'

  I searched HP's site and found several tips to resolve this.

  one of the tips was to check your Bios version and to the most recent update.

  I followed the steps carefully.

  1 check my bios version / date.

  2. check my cpu model.

  3 open the HP website and let it detect my laptop model (and it does correctly).

  Laptop HP ENVY 14-2136nr
  Model: LM764EA #A2N

  4 select my operating system (Windows 7 X 64)

  5 - Check the Bios Driver and download it.

  6 - everything seemed perfect and once I try to install the driver I get this massage of error (this bios is not for your laptop!)

  HOW IS IT?

  HI @ibraham-hashem.

  I see that you have a laptop of HP ENVY 14-2136nr and that you receive 90b fan error. One of the suggestions is update the BIOS, but when you tried you have received the message that it was not for your laptop.

  First of all, I ran the HP Support Assistant to help with updates and solve problems.

  Have you checked against viruses and malware?

  I try to restore the bios, and then retry the update. Restore the BIOS

  If it is not successful, I would go to the bios screen, and when you look down, you should see an option to restore the default values.  Please restore the default values.

  Now, try to install the update to the bios.  Updated the BIOS

  I hope this helps.

• Branch 5505, 1 circuit ISP, Dual - peer VPN Configuration for Data Center & Track Options

  Hi all

  I have a data center with two lines of ISP redundancy and two ASA 5520 for redundancy VPN to my branches.  Each of my branches has 1 ASA 5505 with a base license and 1 ISP circuit. Currently all my VPN tunnels are built for data center main circuit ISP only, so if one goes down, I'm toast.  I need to fix this. Problem is, I don't know how I can control failover on 5505 with 1 single line branch.  Please see my picture for an example of how he looks at it right now.

  So the problem is that the data center LAN my branch has to go to is identical regardless of which circuit of data center is in the. And I know the ASA rules say only 1 VPN tunnel can be active at a time if flow are the same.  So in this case, I know you usually do:

  card crypto outside_map 1 set 12.x.xxx.20 50.xxx.xx.190 counterpart

  and then configure route followed to control when cut down the primary counterpart and turn back up by peers. But where I have only 1 ISP on the side of the branch, I'll only have 1 default route: route outside 0.0.0.0 0.0.0.0 3.3.3.2 1, will be used that the active end counterpart is the primary or the secondary data center. Also, since I did not have a second track, I can't configure followed on the main road with an SLA that defines the trigger conditions, because there is nothing to ensure the follow-up of the routing.

  How is - a would handle a situation like this? Are there other features that can be taken off the roads?  I really need to be able to define "num-package 5 ' in ALS so my sites are not beat all day, but once again, without something to follow, I can't really set up a meaningful SLAS.  Any help is appreciated.

  Thanks for the additional explanation. It helps to clarify your environment. EIGRP running on the Remote would be a nice option, but I'm not sure that it is supported on the SAA. I ran EIGRP to remote peers using IOS routers (using the two ACCORD with IPsec and VTI tunnels tunnels) and it was very effective. But on the SAA, I believe that we must seek an alternative.

  It seems to me that using reverse road Injection as part of your VPN site-to-site should work. With IPP the ASA inserts a static route to remote resources when the VPN tunnel is negotiated and traffic can flow. If you redistribute the static in EIGRP EIGRP then must learn the ways of any ASA a currently active tunnel. And who should provide the dynamic rollover you need.

  HTH

  Rick

• Oracle will consider the creation of a day 2 hands on the documentation for Data Guard?

  Hello

  Oracle will consider the creation of a documentation of son of hands 2 day for Data Guard?

  There is already an OTN 2 day of CARS and performance tuning documentation.

  Thank you

  Updated - she sent the link to this topic for the Product Manager Data Guard.  As a result, Oracle may or may not consider creating 2 days hands on Data Guard documentation, but no doubt they consider at least considering creation day 2 hands on the Data Guard documentation.