Provisioning of users from different areas, based on a user IOM attr field

Hi all

We have a requirement where we are supposed to supply to the users of a particular resource under certain conditions.
The scenerio is like:

In the screen of the user of the IOM, we get an attribute, for example say "Organization Id" which can have so-called values 'A', 'B' or 'C '. If the Id of the Organization has a so-called value 'A', then we need to check if the user is a case of rehire or not. Additional logic must be added if it is the case of rehiring. Once the complete logic is enabled, it must then assign the user to a particular group of which the user through the access policy will be put in service a particular resource to say 'ABC' FIELD.

If said the Organization Id value 'B', then we want directly to the user to be placed in service to a different DOMAIN, say "XYZ" once again using an access policy applied in a group.

Can you please let me know what would be the best possible approach to achieve this.
All entries will be very appreciated.

Concerning
Nikhil

There are several ways to implement your requirements.

I would use an adapter of the entity to implement the Organization and to rehire logic check. Then I would put the user in different groups IOM with enclosed access policies provides the resources (see http://iamreflections.blogspot.com/2010/09/oim-howto-target-system-group.html)

To the different areas, you can either use an object resource with the domain set up in the ITResource or you can clone the connector and use a resource by domain object.

Best regards
/ Martin

Tags: Fusion Middleware

Similar Questions

Select from different tables based on results

How to do this in a select
4 paintings
T3 and t4 are identical in structure, but different data
Select the id of the t1
If exist in select t2 id
Then select the data on t3
on the other
Select the data on t4
create table t1 (ID);
create table t2 (ID);
create table t3 (varchar2 (10) col1, col2 varchar2 (10));
create table t4 (varchar2 (10) col1, col2 varchar2 (10));
Insert into t1 values (1);
Insert into t1 values (2);
Insert into t2 values (1);
Insert into t3 values('DATA1','DATA2');
Insert into t4 values('DATA3','DATA4');
commit;
Ive had the values 1 and 2 in t1. ID = 1 exist in t2, for this record, I want I want the values of t3 but where id = 2, the t4 values.
Possible in a select? Ive been playing with case statement but not anywhere near him

Try this

Select *.

T3

where exists (select 1 from T1 t where t.id in (select t2.id T2))

----

Union of all the

----

Select *.

T4

where does not exist (select 1 from T1 t where t.id in (select t2.id T2))

-----

Ramin Hashimzade

Apex 5 schedule: different color based on the value of data field

Dear Experts,
I need to have a different color for each record on the calendar based on the value of the data field (eg. category).
How can I achieve this?
Thank you!

See: -.

You don't have to wait for APEX 5 integration FullCalendar ~ Blog of Doug Gault...

Played from different sites of videos are choppy

Played from different sites of videos are choppy - stop and start. I have a new video card, but the problem anyway. I confirmed that my driver is good. What could be the problem?

Hello

Thanks for posting your query in Microsoft Community.

According to the description of the problem, I understand that you are facing the issue with online videos.

I will certainly help you in this matter.

1. which web browser you are using?

2. What is the operating system installed on your computer?

3. were there any changes made to the computer before the show?

If you use Internet Explorer, please follow the steps in the link

The video problems when you use Internet Explorer

http://support.Microsoft.com/kb/2532294

Using the windows-related issues feel free to post on the Microsoft Community Forum.

Area text entry - different results based on different inputs?

Hello
I am trying to find a way to use the text input box (if there is a better tool for go, let me know) in order to show a particular legend with a particular response box. Thus, for example, in a text entry box standard, I have listed 4 possible "correct" answers, and for this example, I'll just say answer 1, answer 2 and answer 3 answer 4. I would like every answer to bring up a box of different caption with a different statement based on what answer they type in. Basically:
Response-> Caption 1
Answer 2-> Caption 2
etc.
All I ever get is for each right answer answer the same standard buttons, success, failure, etc.. I can't add a new button that would pop as the standard, or, as I would prefer, legends instead. Any ideas?

You should be able to do it with a tip action.

Create captions that you want to display for each variable and uncheck the "visible" box for each.

Disable the button for the ETB. Add a separate button and set the "success on ' to execute advanced action. Create a conditional action that checks if the variable associated with the ETB and shows the legend you want based on the variable.

The way I tested it, I had an 'if' statements for each variable.

Devices of BB 2 Smartphones blackBerry (operators from different countries), 1 email BES cloud account

Hello

I have my companys to 365 of Microsoft email accounts and I use the Cloud of BlackBerry service for users of my BB.

A user's MAC computer and 2 BB devices. One of Romania and Greece.

The Romanian operator (VOdafone) is configured to sync with the Cloud Service of Blackberry Wireless.

He now wants to also have the e-mail to the Greek operator.

issues related to the:

(1) can I have the Cloud of Blackberry Service - I think that BES to 2 simultanuesly devices?

(2) otherwise I can implement BIS to the BB of the Greece device? Who will work. Only to receive emails. No need to sync calendar and contacts.

(3) if the No.2 above is possible, I'll download the Blackberry Desktop for Mac to synchronize manually if possible.

THx in advance

Hello

I have not used the exact service you are trying, but I'll see if I can give what I know...

kouliscon wrote:

(1) can I have the Cloud of Blackberry Service - I think that BES to 2 simultanuesly devices?

If it is indeed BES, then usually a BES environment can have one and only one, BB integrated by BES account. So the answer would be no. (but, again, do not have used the exact function you specify...)

kouliscon wrote:

(2) otherwise I can implement BIS to the BB of the Greece device? Who will work. Only to receive emails. No need to sync calendar and contacts.

BIS is actually documented as an access method for the service. Under BIS, each BB functions very similar to a typical email (POP, IMAP, OWA) client... and you can have multiple clients access the mailbox via integration BIS. See this:
- KB31310 BlackBerry Internet Service and Microsoft Office 365 services
- KB27422 BlackBerry Business Cloud Services for the provision of Microsoft Office 365
Yet once, all my answers are based on the typical BIS and BES services... I don't know if, at 365, things are different. You may also search public KBs, for additional articles that might be helpful in your situation. Of course, you should actually try to implement what you want... and see what happens.

Good luck!

How can I change the graphics in different areas of a movie?

I have a project I have been working for a flooring company. They want a Flash animation that allows the user to change the appearance (color and product) of the different areas of the floor.
I have a menu on the side left which refers to the three different areas of the floor. I have the two products as well as samples of color on top. I currently have each of the three areas as separate movies loading in a main movie.
These films from three region each contain samples of color on top like buttons to change the color of this area using actions ' on release > go to image tag "that displays each of the different colors. These films each load on another plan, based on the selection in the left menu.
I want the user to be able to go to each of the three areas and change the attributes of the product and/or the color without losing what they had already done. For example, if they choose the PRODUCT A in RED for ZONE 1, then they want to change the product and/or color on ZONE 2, I still want to film on view A PRODUCT in RED for ZONE 1, etc..
The problem I encounter is that when you go back between the three areas, navigation controls that this film is the highest level and does not allow the user to return to a previous area and change the product and/or the color attribute.
Keep in mind, I'm a designer, not a developer. My Actionscript knowledge is very superficial, to not throw a bunch of "geek talk" look at me ;-)

We don't know how you have arranged design timeline-wise, but what you need to do is to get out the chronology by as much as using clips. Each zone as a movieclip different that you control with the selection buttons. In this way, change the current image of a movieclip does not interfere with another.

focus on different areas inside a handler, depending on how the Manager is registered

I have a screen with a vertical area manager that has two fields:

A field. Another Manager of vertical field with several text fields

Two filed. a button field.

Upon entering this screen from another screen, the focus is on the first field to text field. Which is very good.

But when a user moves the focus to the field of button down. If he tries to move the cursor to the top, the focus moves to the first field of text in a field. Instead, I would like that the focus moves to the LAST field of a field, when the cursor moves the button upwards.

How can I do? Focus on different fields on a field, depending on whether a field is entered the base or not.

Thank you

Protected override Sub onFocus (int direction) in your manager and, if (direction< 0),="">

Integration of the TPM with 2 different areas AD

Hi people,
We have an obligation to incorporate 2 different areas with OVD AD and provide a single view of the data from the announcement of foreign principals of the follow-up to the announcement that the Member in the Group AD1 attribute value is set to the AD2 user objectSid.

I created the maps below and custom plugin as part of the implementation:
- Created an AD adpater to AD1 Directory(AD1 Group adpater) Active traction groups - main card
- Created an AD adapter to users to get AD1 Active Directory (adapter user AD1)
- Created an AD adapter to users to get AD2 Active Directory (adapter AD2 user) - link adapter
- Created join adpater so that data on top 3 adapters can be provided in a single view (join adaptor)
- Custom plugin was created to replace the Member of the group attribute in AD1 containing the value objectSID with the corresponding user DN AD2
- Custom plugin extends the BasePlugin interface and the inti() and postSearchEntry() method overides
The custom plugin triggers when I connect to OVD through any LDAP browser and navigate the view and the custom plugin does its job to replace the member attribute in AD1 with the DN of the user of AD2, but when I run the ldapsearch to OVD to return the Member for any particular user (Member = cn = < UtilisateurDN >) I do not see my custom plugin to trigger and the ldapsearch is passed to the AD1 where it has no Details on the user DN but only the objectSid of the user.
After investigation, implemented the get() method in my custom code to transform the search filter incoming (Member = cn = < UtilisateurDN >) with the objectSid (Member = cn = < objectSid >) and past the filter changed to the chain.nextGet () method.
In the journals of backend, I can see the custom plugin is triggering and turning the filter and passing to AD1 and custom plugin print groups that belongs to the user, but I don't see any results for the ldapsearch command.
Counsel on this will be highly appreciated.
Thank you
Simo

You will still need to run super.get () when there is any result to add.

EPMA planning application migration: no synchronization with the provisioning of users
Hi all
We are migrating Production applications to dev. We have a planning EPMA and Essbase application in both environments.
We migrated artifacts in the file system in PROD (Shared services, EPMA, planning, Essbase) and Reporting. We have copied and pasted into the folder what in DEV.
Then, we try to migrate objects in DEV file system applications. First of all we did successfully EPMA artifacts in the migration status report, and then we deployed the application in the planning without any error. (msg showing as synchronized deployment). After that we had shared services, it is not
MSG for error report status of migration:

+ 28:6571:Application < xxxxx > does not exist in the target. 28:6571:application < xxxx > does not exist in the target. 28:6571:application < xxxx > does not exist in the target. 28:6571:application < xxxxx > does not exist in the target. 28:6571:application < xxxx > does not exist in the target. ...+

When I try to open the planning application, I get the error message: unable to synchronize with the commissioning, user see Planning journal for more details
HyS9planningsyserr.log details:
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
[INFO] RegistryLogger - REGISTRY LOG INITIALIZED
Rebinding of RMI thread creation
com.hyperion.planning.DuplicateUserException: another user with hypadmin name already exists.
com.hyperion.planning.DuplicateUserException: another user with hypadmin name already exists.
com.hyperion.planning.HspRuntimeException: synchronization with the provisioning of users failed. Check the journal planning for more details
at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
at HspLogOn.Handle (unknown Source)
at HspLogOn.doGet (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.lang.RuntimeException: errors occurred during synchronization: [com.hyperion.planning.DuplicateUserException: there is already another user with the name of hypadmin.]
at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
at HspLogOn.Handle (unknown Source)
at HspLogOn.doGet (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.lang.RuntimeException: errors occurred during synchronization: [com.hyperion.planning.DuplicateUserException: there is already another user with the name of hypadmin.]
at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
at HspLogOn.Handle (unknown Source)
at HspLogOn.doGet (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
com.hyperion.planning.DuplicateUserException: another user with hypadmin name already exists.
com.hyperion.planning.HspRuntimeException: synchronization with the provisioning of users failed. Check the journal planning for more details
at com.hyperion.planning.HspJSImpl.synchronizeUserWithProvisioning (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HspJSImpl.login (unknown Source)
at com.hyperion.planning.HyperionPlanningBean.Login (unknown Source)
at HspLogOn.Handle (unknown Source)
at HspLogOn.doGet (unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:283)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3241)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2010)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:1916)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1366)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
java.lang.RuntimeException: errors occurred during synchronization: [com.hyperion.planning.DuplicateUserException: there is already another user with the name of hypadmin.]

Thank you
Mady
Hello

I have the solution for this problem with the support of the Oracle.

I have restored the database and migrated artifacts using LCM. a method is enough to make the migration of Planning (from Support of Oracle) applications

Thank you
Mady

How to install correctly the Provisioning of users DB management
Hello!

As a beginner, I try to configure the provisioning of users for Oracle 10g DB.
Software installed:
-Oracle Database 10g (10.2.0.3)
-Oracle WebLogic Server 10.3
-V9.1.0.1 oracle Identity Manager
I put everything in a virtual lab on MS WinServer 2008 environment to test things...

I am going through these steps (IOM connector database management © 9.0.4 User Guide):
http://download.Oracle.com/docs/CD/E11223_01/ doc.904 /e10425/toc.htm

My PROBLEM:
1. I completed all the steps from the Documentation until the "Connector feature 4 tests:
http://download.Oracle.com/docs/CD/E11223_01/ doc.904 /e10425/testing.htm#CEGDGBDA

2. I edited the "config.properties" like this (according to the documentation):
http://img2.imageshack.us/img2/3743/ConnectU.PNG

3. then I run OIM_HOME\xellerate\XLIntegrations\DatabaseAccess\scripts\DBAccess.bat

* 4. And the test is a failure, see below for the error: *.
http://img527.imageshack.us/img527/994/error2l.PNG
http://img79.imageshack.us/img79/3647/errori.PNG

Your response is greatly appreciated!
I thank very you much in advance!
Hello

There is a notion of 'reconciliation of search' you need to understand.

To any target system if there is no field for which there is a set of predefined values (only these values must be fulfilled here), then we write a kind of reconciliation looking to schedule a task. In the backend code will link actually to the system target, reads all the valid values and then fills these values for corresponding in the IOM associated with this field of the process shape.

In 'Database UserManagement' connector 'Rôles' are the type of fields that have a research associated with it. The latest connector pack for it is 9.0.4.5. If you need to find a scheduled task that must reconcile these values of the roles of the target with the IOM by deposit in the attributes of required task. Once these values are filled to the IOM, you can very well use these values in the screens configuration of workflow for this resource by clicking on the icon of the field search.

Let me know if you need more information.

Sunny

I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and the communication

I have a question why U removed the session of keyboard spelling checker is a very useful sit Apple give it in products. It helps a lot in communicting with others from different countries, even in our studies and communication with our teachers.plz it back... .hope you will do

Nothing has been deleted. Perhaps if you explain better what it is you are looking for, a person might be able to help. You mean maybe predictive text? All these settings are in settings > general > keyboard.

Satellite Pro M10 - horizontal lines on the screen in different areas

Hi all

I hope someone can help.
My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
Perhaps a cooling problem? Or problems of motherboard?
The motherboard has been replaced twice, hoping that this isn't another mobo problem.

Any advice would be great.

Thank you.

Hello

I m not 100% sure but to me it looks a bit like an overheating problem
Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

I wonder how you were able to replace the graphics chip on the motherboard? :|
If I m not wrong not the chip is fixed and the replacement is very easy and difficult

It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

Sorry, but that's all I can suggest.

Best regards from my friend

can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

can I use 2 Mac Pro, the old and the other from different locations with the same apple ID?

Yes. The only problem that I see if Macs were different countries. The method of payment in the account/ID must be associated with the country where the unit is located and you can only buy Apps from the store of the country where the computers are located