Proxy for ERPIntegrationService

Similar Questions

• Transfer of licenses of Proxy for the UC phone to ASA newest

  A few questions about the issuance of licenses for the ASA and the licenses UC phone Proxy.

  1 if I buy a block of 24 licenses UC phone Proxy for the ASA 5510, I am able to add more than 24 blocks needed?

  2 can if/when tire upward to the ASA and ASA 5510 5520 or 5540, I transfer phone licenses Proxy to the ASA again?

  Thanks in advance.

  1. Yes, you can buy licensed user CPU upgrade for ASA 5510, with up to 100 users for ASA5510 UC. You can not buy however a user 24 existing UC to be added to the license of the 24 user license. You must acquire a license from 24 to 50 or 24 to 100-user license upgrade.

  Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  (Article 'Lines additional guidelines and Limitations', fourth ball point)

  2. No, the license is linked in the serial of your ASA no existing, and it is not transferable. Here is the URL for your reference:

  http://www.Cisco.com/en/us/docs/security/ASA/asa82/license/license82.html#wp194956

  (Section 'Guidelines and additional Limitations', second indent)

  Hope that answers your questions.

• Create proxy for the image sequence

  Hey guys,.

  Today, I was delighted to see the newly implemented for PremierePro proxy workflow.

  Unfortunately I have not yet figured out how to apply this workflow for image sequences.

  Is this possible?

  Background:

  We do not stop motion animation and all our images always comes into frame sequences with each frame being 20 MP. We want to keep the resolution up to photo-serrure, because we would like to keep the possibility to crop and zoom into images.

  So far, we have created lowquality of sequences of images as proxies (in the same resolution) and they use them for editing in a FullHD timeline, where we can evolve and frame (and of course change) images. After picture lock replaced the original media. Once the images is online and the harvest is final, we create a FullHD prores file for VFX and editing.

  But this process is error-prone.

  When I now import a sequence of images in the creation and create a proxy for her, a mov with only the first image file is created.

  Which is obviously useless.

  My question:

  1 would it not possible to import a sequence of images and create a sequence of images of proxy (with the same interpretation of the images, i.e. of framerate) from the original image sequence?

  2. the sequence of images proxy perhaps erred in lower resolution (original image in format 5760 x 3840 px, resolution 1920 x 1080 proxy), and once I pass the proxy to original scaling is adjusted accordingly.

  Really looking forward to some tips to achieve this!

  Thanks and good luck

  Max

  I had a little further:

  I made a mistake by creating templates in the MediaEncoder:

  I created a coding model and not a model of ingestion (who both the end of the .edr file), which should in fact have been obvious.

  So now I have:

  1 has created a file of 5760 x 3840 Prores4444 out of sequence of images

  2 imported the first PorRes4444

  3 creates a proxy using my own template (ProRes 422 Proxy 1920 x 1280) with aspect ratio 3:2.

  It works, BUT:

  When I play the file on the timeline proxy, the proxy file is adjusted differently than the original file (proxy disabled), but only during playback.

  It is probably a completely different question, I'll create another post for this.

• Can I use IBM HTTP Server as Proxy for WebCenter content?

  When I worked in development, I used Apache 2.2 as a Proxy for WebCenter content.

  I would use the WebLogic Server plugin 'mod_wl_22.so' in Apache to redirect the request of WebLogic.

  In Production, I need to use IBM HTTP Server (IHS) as a proxy.

  I couldn't find any plugin WLS for IBM HTTP Server.

  When I looked at the note of support Doc-ID 1111903.1 , it does not included of IHS in the list.

  This means that IHS is not supported as a proxy for WebCener content?

  If not, can someone tell me where I could download the plugin, please?

  I tried to use the same configurations for Apache 2.2 to the IHS.

  Startup is fine, which means that IHS could load the module 'mod_wl_22.so '.

  But I got error 403 for the connection.

  I couldn't see any access connected the WLS, so I guess that the connection failed introduce to the IHS.

  Any suggestion, please?

  If you want to use for the work of pure http proxy that I don't see why it wouldn't work. However, I didn't a study on this specific topic. However, you may need to do more things manually in the configuration box, and it cannot be officially supported. The unsupported part is often a point where I suggest you use another product that is supported.

  Kind regards

  Johan.

• vRealize Agents of Proxy for the Automation Center

  Hello

  I have a vRA 6.2 installation, installed a proxy for Hyper-v agent and tried to set up the same as an endpoint. I'm running into two issues during the process.

  Question No. 1:

  When I try to create an endpoint after you create the proxy agent, the ability to choose "Hyper-v", as the type of the end point is missing. The only option I see is "vSphere. Now, this makes me think there is a problem with the initial installation of the vRA framework. I enclose the screen turned to the message.

  Have any one seem this before? What are the condition that the final option please (even before configuring it)? Already checked the licensing part. Support attaches to understand. The proxy agent shows online and very much. But there is some instance where to choose "Super v" as an endpoint is available even before you install agents. (including VMware lab)

  Question 2:

  Even after uninstalling the proxy on the server of IaaS agents, agents are still displayed in VRA-> infrastructure-> setting-> agents, prevents us from make the trials more that we are not able to add the same "Compute resource" with a proxy agent different, even after uninstalling the proxy agent. It's just the multiplication of the obsolete entries that support is still studying on it as well. Is there a way we can force delete the reference agent proxy in the VRA? I have uninstall agents using Windows Add or remove programs and cannot find the appropriate steps to uninstall a proxy agent.

  For some reason, I think the two issues can be interrelated. I restarted the server several times to verify.

  I appreciate all the help from your past experience. Thanks for the time.

  Your Correct, after spending some time with support, it has been the granting of licenses, when we entered VRA Advanced Suite licenses. It worked.

  Her reason why we discarded before licenses, there was another case where the same key is used option Hyper v was available, the only difference is the species has been headed as VCAC and put at level VRA. So technically if you VCAC instance with vCloud Advanced suite you will have the option to go to the top of endpoint of Hyper v, and you upgrade that instance to VRA with the same license key, the endpoint options are preserved. (Not so smart)

  Regarding the "Incidents2":

  It seems REALLY have no feature that would automatically dsregard uninstalled proxy agents. You need run a SQL query that is provided by helping remove computers that aren't actiuve. So best approach not to install agents in VRA unless absolutely necessary.

  The question did not help the reputation of VRA.

• sec_error_bad_signature only through proxy for https Web site

  Hello

  I tried to open the website https through the proxy of the company, but it does not work.

  It happened only with firefox. Chrome & IE is quite fine.

  Thanks for teaching.

  Khoa.

  I was suggesting to the certificate information link, but there is a clue that you are using Zscaler. We had a thread indicating that you can export the certificates from the Windows (via IE or Chrome) certificate store and then import them into Firefox: https://support.mozilla.org/questions/986876

  I'm not sure whether that is documented in detail anywhere, but please note:

  • In the certificate Viewer, IE or Chrome, click on cert Zscaler you want to export in the Certification Path tab and use the button view the certificate to open it directly.
  • Click on the Details tab, and then click the Copy to file button. This will start the Export Wizard. Use the DER format and save to a convenient location.

  When you are finished with all exports needed to complete the chain in the Certification path, you can import the certificates into the References of Firefox tab:

  • "3-bar" menu button (or tools) > Options > advanced > mini-onglet Certificates > "View certificates" button > mini-onglet References > button "import".
  • I suggest allowing the certificate for Web only, unless your IT suggests otherwise

  Fixing a few screenshots for reference.

• How to check the proxy for android settings

  Hello... When I try to go on youtube in mozilla android, it will not at all and it gives me a message to check my proxy settings... I tried as I can... could not find or know what proxy change... see no network as my "Windows computers" option... I put for 'no proxy'... too bad... I added a lot of features to firefox and cannot go on youtube and a few other too.*john sites

  Hey John,
  I'm sorry to hear that on mobile Firefox for Android requires to verify the proxy server. This happens on several networks?

  If there is a proxy must be included in all: networking. That plug your url and see if there is a proxy listed.

  There is also a nice add on Mobile Proxy that might be able to list them.

• Proxy for HP Envy 17 "laptop touch screen settings

  Today - 13/12/2015 @ 16:25 (Pacific) - laptop bought 14/12/2014 @ Costco

  10 months - issue began

  2015-01-27 - 09:00 - 10:00

  After the installation of Citrix Receiver v4.1 (by my employer), I noticed a Trojan virus was detected by McAfee and quarantined.

  Then, I had problems connecting to Citrix with the new responsible application.

  Then I noticed that I couldn't access the Gmail e-mail

  Then I noticed that I couldn't reach MSN.com or other websites - possibly firewall blocking access - maybe after Trojan has been discovered

  Was responsible for checking the Proxy settings under the spell of settings PC settings > network > Proxy and I noticed a duplicate entry.  (Win 8.1)

  I removed the redundant entry and click SAVE.

  http is 127.0.0.1:49239;. http = 127.0.0.1; 49239

  Don't know what to do next.  Icons and shortcuts seem to lock up and nothing doing on occasion, and I can't access the internet.

  I renewed my McAfee LiveSafe - since Internet Securty, performed a full scan with no problems reported. However, I get a notice that McAfee wants to quarantine some Soft Adware that wants to run.

  I applied all the patches from HP recommended for my laptop computer and rebooted several times.

  After a few fixes, none of my windows would work, but I could click on it.  Now, after a few updates, I can click on my windows again and applications appear to run.

  I need to access the internet or this laptop is useless for me!

  How to reset my laptop to factor settings or fix this proxy?

  Is possible with HP remote support?

  Costco extended my warranty of 2 years.

  I have a case of office help Costo Concierge #, but they sent me on to www.support.hp.com (800) 474-6836.  So far, I'm just going around in circles and do not receive a lot of useful support.  I hope that this Forum will help going me in the right direction.

  Thank you!

  TAD0JAZZ

  It is a solution very full; However, I have chosen to reset to the factory settings and set to level to a Windows 10 in the process. Who decided most all my problems.
  
  My next challenge is to get the Beats Audio drivers updated. I have very little control volume with the audio driver by default that it installed when I upgraded.
  
  I accept your solution.
  
  Thank you!
  
  Todd

• Proxy for waving emulator (BB WebWorks 10) settings

  Hi all

  For construction and the terminal app to order package, I am executing the command as below:

  bbwp xyzzz - buildId 10 g C:\Users\rj\Desktop\TestProject\TestProject3.zip params - params.json o C:\Users\rj\Desktop\TestProject\output

  If I will not params.json here, it won't be able to run and will be asked to provide the parameters of proxy here.

  I want to use same file for emulator while waving param.json build and packaging app by ripple. Every time, I want to build & packagae, I use open network (another way to coonect my network like dongle system) because of the proxy settings.

  Is there any way for waving too as we have to control terminal. While it would be possible to provide proxies here too, so we won't have to use another way to conncet to the network.

  Thanks in advance

  Unfortunately by the way params.json is not currently supported by Ripple build and deploy services. For now, you can use the command line to build your application.

  For the development of the BlackBerry 10, gives us a new tool to build and deploy GUI, config.xml edition, etc., which is currently available in beta. We will add in favor params.json in this tool in time for the release of gold.

  Thank you!

• Convert PDFs using Document Cloud is blocked by proxy.  Please provide the URLS to ignore the proxy for the conversion

  I've already included *. Adobe.com*, but this does not solve the problem.  If I disable the proxy, there are no conversion issues.  The error I get with proxy is error contacting server.

  EDIT: Just for clarification, we use a proxy.pac file

  As you've identified, your proxy is the problem. Only you can provide the fix.

  Be well...

• Configure the HTTP Proxy for ESX4i

  Hey all,.

  I am fairly new to the virtual technology so excuse my ignorance. I just finished the training of PCV and I get some hands on experience using laboratory of my company. The laboratory network restrictions allow only internet access (and any other) my ESX hosts through a proxy server where I have to enter my credentials. (I need internet access for the NTP settings - for now).

  I tried to understand this for about 12 hours and I am very close to madness... I'm either missing something obvious like: 'you can't' or something that is not easy to find for someone like me.

  Thank you, Derek.

  Welcome to the Forums - I don't think it's possible to provide the proxy settings for your ESXi host - the around who is to create a virtual machine where you can configure the proxy settings that need to connect to the NTP source and whether your NTP Server internal -.

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Workaround for JRE proxy for local addresses always bypass proxy

  Hi all
  
  I am currently dealing with an issue with the proxy in java configuration.
  
  Situation: I need a proxy server to connect to the internet, and I have a few addresses configured in Internet Explorer that bypass the proxy server.
  example of how I have it set up: *. Google.com; * 212.115; 62.69.179.198
  
  The address at which I am trying to achieve is not in the list of circumvention, or beaches excluded in the bypass list.
  
  Initially, I got java set up using the browser settings. I thought he didn't pick up the settings of the browser at all.
  However after you have configured the proxy manually in java it still did not work.
  
  During the search, I came to the conclusion that as soon as I activate the "bypass proxy server for local addresses" in Internet Explorer, or manually in java.
  Customer JRE automatically bypasses the proxy and always uses "proxy direct =". As soon as I turn off this feature, he began to use the proxy server.
  
  I have no idea why this is happening?

  Why do you need to check this option then? Simply configure Java/browser to use the proxy and add it to your list of exception/bypass. That should do it. "bypass the proxy server for local addresses" is a bit ambiguous and depends on the way your network is configured and what is defined as a local address. Is your LOCAL proxy server as well or you are using an external proxy server?

• HTTP proxy for AS2 delivery channel

  Hi all
  
  During AS2 delivery channel configuration, there is a checkbox "Use proxy". Where can I specify proxy details? In addition, for the additional http headers, which is the standard that must be followed?
  
  Kind regards
  Praveen

  Hi Praveen,
  Ideally the Proxy setting is done while installation.
  If you missed during the installation and you want to use proxy B2B then you can try to give below property when you start the managed server:
  -http.proxyHost = - Dhttp.proxyPort =

  Rgds,
  Nitesh jegou

• How to configure the proxy for firefox androidversion?

  How to set parameter for android version of firefox?

  Thank you

  Hello

  I have had a look and found this page that should help you.

  If this is not the case please come back here and we'll see what we can do to help.

• How to "automatically detect the proxy for this network settings" and "Use system proxy settings" work behind the scenes?

  How can I see what the firefox proxy actually uses when I check either of these two options?
  There go to Internet Explorer?
  They are stored somewhere in the registry?

  Hi conectionist,
  This is taken if there is a proxy configured in the network settings on your operating system. If you want to test there may be further on:

  • https://addons.Mozilla.org/en-us/fire.../?src=search

  Please feel free to research to find a better if necessary.