PS Edit CS6 controls grayed out for copy / cut items and diapers?

Similar Questions

• cs6 PS why the command copy is grayed out - cannot copy obj?

  PS cs6 cc:

  Why the command copy is grayed out - cannot copy obj?

  

  lsepolis123 wrote:

  If press Ctrl + A selects all the psd doc... or (when the selected layer - in the Panel layers) in the tool move or the selection tool, well?

  While the ants marchimg shows the layer limits what you write the entire document. Only the pixels of the target layer are selected.

  Here are two screenshots.

  I have two documents open in Photoshop. There are three top ob Basemap layers layer a red, a green and a blue.  Second teas of the same size but only a white background layer.

  I aim for the Green layer made a Ctrl + A to select the green channel any note the dotted moving line describing the composite view of the entire document. I followed the Ctrl + A with Ctrl + C (copy).

  I then passes to the second document just a white background layer and did a Ctrl + V after the background screenshot shows the results.  Only the green pixels have been copied to the Clipboard.

  

• default account option is grayed out for my main account

  My original main e-mail account used to be the top of the drop-down list (thus by default) for the creation of new messages. As I added a few gmail accounts, one of them appears first under Inbox and is now the top of the drop-down list. I can't figure out how to get my old primary account returned as default. In the account settings, it says my account desired by default is "" a special account and has no identity associated with it '. " In the menu Tools-settings, "set as default" option is grayed out for this account. What does 'special' and how can I find this account to be my default "from"?

  In this case, you use what is normally called local folders which is a special Pseudo-compte of private sector for offline storage.

  Somewhere there is an e-mail account real, but if it uses POP and has been set to use the global Inbox, it can be difficult to see.

  Define view | Records | All the and see if can be found. If not, you will need to go to Tools | Account settings and look at its properties there.

  I guess at some point you've changed 'Local Folders' to something else, that will make giving you advice difficult, and will follow more difficult advice for you.

• in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  in Acrobat 8 Standard advanced editing tool is grayed out in Windows 7 and Windows 10 but works with the same pdf file in Windows XP Professional. Why?

  Perhaps because Acrobat 8 is not compatible with Windows 7 or 10.

  Friday, October 9, 2015 at 22:11, thosdelaney [email protected]>

• Configuring settings grayed out for Advance Options

  Can someone tell me why the Configuration settings for the advanced my ESXi environment settings are grayed out for all of my VM?

  Hello and welcome to the forums.

  The Configuration Settings button is grayed when virtual machines are turned on.  You shut down VMs that behave in the same way?

  Good luck!

• Bug 7372061 R12 APPROVAL INITIATE BUTTON IS grayed OUT FOR THE BILLS WITH WI

  Hello
  
  Is it patch available for > > > > Bug 7372061 R12 APPROVAL INITIATE BUTTON IS grayed OUT FOR THE BILLS WITH TAX WITHHODLING
  In workbench Bill initiate approval checkbox is grayed out for the Bills with the withholding tax.
  Fixed apinvutb.pls 120.44.12000000.15
  
  
  
  I tried to search on metalink but theres no such fix name.
  
  
  Thank you

  Hello

  I think that you have nothing to do at the moment. As suggested before, log a SR and do escalate the issue.

  Good luck!

  Kind regards
  Hussein

• Odd - Print/print only one copy is grayed out for a specific PSD, so I can't print it!

  I have worked on a few images for a competition, a print and then to print, but the print menu option is grayed out. How is that possible? What would cause a Photoshop to "decide", it can not print a picture? How can I get around it?

  Photoshop CC 2015, Windows 10, Alienware M14x (16 GB of ram, Intel i7 - 3rd Gen), Epson R3000.

  Discovered the answer 'somehow' it had been converted to 32-bit, and when returned, the print options were available.

• CS6 multicamera grayed out

  Hi all and thanks in advance.

  I have CS6 with all patches installed.

  I took a prior project and exported several clips to AVI uncompressed.

  Then, I created a new project and imported these uncompressed AVI clips.

  When I've lined up in a sequence and went to do a multi-camera editing that I found in gray.

  I deleted the project, recreated and tried again.  It is always grayed out.

  Can someone tell me why it will not allow the multi-cam edit function and how to fix it.

  The multi camera function has worked in the project clips have been exported since.

  Thanks for your help,

  Mel

  You must align not only clips in a sequence.  You must nest this main sequence in a second sequence, then right click will show several cameras in option.

• Accessibility issue 508 in Acrobat; accessibility controls grayed out

  Hi - I have to check the PDF in two different versions of Acrobat.  On my computers, accessbility features work very well.  Then when I went my other office on my laptop, I tried to check the accessbility and all controls of same on the other computer are grayed out.  I'm quite intrigued by this so I do not know if the laptop has a kind of blocking permissions (I do this work for a government agency) or what.

  Here is a screen shot side by side versions of two computers of Acrobat

  

  Can someone tell me why these controls are grayed out and I have to do to light?  Thank you.

  Hi Michael,

  Is one of the Standard versions (the pictures are a little blurry, I can't say)? Accessibility features are available on Pro.

• Printers under the original user have the printer properties grayed out for new users, even if they are members of the Administrators group

  Windows 7 Pro 64 bit (and 32-bit) Setup on the domain.
  The domain users group is added to the local Administrators group.
  Printers are installed under the first domain user.  These aren't the printers shared, but local usb printers or printers attached to the tcpip port and driver installed.
  All right.
  Users in the second domain is connected to the computer.  They are part of the local Administrators group, because they are part of the domain users group.
  They're going to look at the properties of the printer and almost everything is grayed out.
  Why?  Because they are part of the local Administrators group, they should not have full access?
  I look at security for printers and I don't see the first person in the list because it was created with their profile, but I also see local administrators that this new user belongs to a group.  Now I can take everyone and increase the rights and then log in as a new person and they can then change the properties, but why can't new users "who are admins the" does not alter the properties?
  Thanks in advance for your help.

  Hi Gsaunders,

  If the computer is connected to the domain network then the question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro&filter=AllTypes&sort=lastpostdesc

  It will be useful.

• Console Remote button grayed out for M605 blades seen CMC

  Hello

  When connected to the CMC and look at a preview/properties/server status, M605 blades show the Remote Console as grayed out button, but the button iDRAC is normal.

  At the start of the iDRAC a blade, the Console tab can be selected and the Console launched very well. So nothing wrong with the connection to the console.

  • How the key of Remote Console can be enabled from the CMC? Why is greyed out?

  (BTW, in a chassis mixed with M610 and M605, of the M610 all show the button Console remotely normally, but the M605 are greyed out)?

  Thx for your help,

  John Bradshaw

  John,

  The M605 is a blade of more early liberated. The M610 is actually cut, everything that follows the M610 will support the launch of the Console remotely from the CMC. The M600 and M605 does not support, but can be launched from the Drac.

• Enable 3D Support box grayed out for Windows Server 2008 R2 vm, not for the Windows 7 virtual machine

  Hello

  IM wondering why the 3D feature is not available when I select Windows Server 2008 R2 as a type vm.

  For testing purposes, I have created a machine virtual 64-bit Windows 7 and the 3D box is not grayed out.

  I wonder why this is the case?

  Welcome to the community,

  3D support are not available for all guest operating systems. Please press the 'Help' button to find out what OS comments are supported.

  André

• "Straighten the lines' grayed out for multiple lines MLD

  SDDM v4.1.0.866

  The selection of several relationship lines in a diagram of LDM created with an earlier version (4.0.2.840 and perhaps earlier too well but I have not tried), straighten lines is now grayed out and not available. It is activated when I select a relationship line. It happens that LDM non-relational diagrams (i.e. in diagram relational, I can select several lines of FK constraint and straighten the lines can be used).

  This behavior is also now seen with v4.0.2.840 (when I load a design created with this same version), where it is used to straighten the lines on several front lines. I certainly would have noticed this if present behaviour earlier, since it is such a waste of time. I think that it has appeared since the installation of 4.1.0.866.

  On a new design created with 4.0.2.840 or 4.1.0.866, the usual behavior of allowing to straighten the lines on several lines is fine. The problem appears only when loading existing diagrams of LDM.

  Any suggestion would be appreciated,

  Patrick

  Also, I was able to reproduce and logged a bug.

  You have found the good workaround.

  Philippe

• Scheduling option is Grayed Out for Discoverer user

  OracleBI Discoverer 10g (10.1.2.1)
  Oracle Business Intelligence Discoverer Plus 10g (10.1.2.48.18)
  ===============================================
  
  I have a user who has shared a relationship with another user. When the second user click on file > schedule..., the 'Calendar' button is grayed out.
  
  I'm a newbie at this, any help would be appreciated. Thank you!

  Hello

  The second user does not have the correct privileges set.

  Log into the Admin of discoverer, click privileges, search the second user and check the box that says "Appendix workbook."

  Kind regards
  Lloyd

• Why Export button grayed out in first 10 items?

  I'm trying to export (in a file on a disk in the end) an excerpt from a minute to 10 minute video in my calendar.  In earlier versions of PE I went simply to file > export and picked up one of several options (film, etc.).  The export option is grayed out in 10 EP (which I use on the Mac).

  No idea how I can activate it?

  Thank you.

  Just place the work area bar to cover the range you want to extract and select only WAB in the dialogues on part.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children