psc1510 shows as disconnected even if it prints

Similar Questions

• I bought a 1 year subscription, but it's show have expired even if the 1 year is not yet up.

  I bought a 1 year subscription, but it's show have expired even if the 1 year is not yet up.

  The order purchased on

  05/05/1

  is cancelled. The new order has yet to be set. Please disconnect & reconnect the CC Office application to activate the new CC.

  Concerning

  Stéphane

• FF28 upgrade & all the addons are showing that off, even if they are enabled

  Upgrade to FF28 & addons all + userscripts show that disabled, even if they are enabled.

  I already tried to delete:
  addons. JSON
  Compatibility.ini
  Extensions.ini
  Extensions. JSON
  Extensions.SQLite

  All that done as a cause of Firefox go in a "reboot several times 50 times more than one by one and each time asked me to manually install each addon. The process took more than 5 minutes and left me very impressed by the ability of Firefox bugs.

  End result? I am still sitting with the same problem. All the addons are showing that off, when they are turned on in fact. I cannot change them, uninstalled them or install new addons.

  PS. Oh and I write of Sleipnir not Firefox because Firefox has refused to work with the buttons on this page for some reason any (yes I'm allowing scripts in NoScript)
  PPS. Oh and my old account here for some reason some refused to open a session, even though I wrote the user name and password and I tried using the user AND email for the login process. Overall, very impressed with the services of Mozilla for now. I really want to move to a different browser.
  PPP. I have over 300 tabs open in Firefox, so can't go on the road to reset, because Firefox has no way to record a session.

  Honestly, Firefox must be transportable by default. What the point of having a browser that you spent 12 months + customization with 300 + tabs open, if your Windows partition is damaged and you cannot retrieve your tabs because it is installed? I will never use the installed version of Firefox again because it is impossible to save. If I had been using portable Firefox at the time where I could have accessed my XP partition corrupted with Ubuntu live USB, back up the folder and be good to go on my new install of Windows 8. Instead I had to start from scratch. That's what you get for not using of portable software.

  This is resolved. The steps that I followed:

  1. Ignore all the Internet advice and find a way to do it myself because no one else seems to know anything about Firefox.
  2. Save the entire Firefox portable folder making it a 7zip file
  3. Disable all addons
  4. Download the latest mobile Installer
  5. Install using the portable Installer but navigate up to the existing installed cell phone directory
  6. Open portable Firefox after updating
  7. Update all addons (do not select all again)
  8. Restart Firefox
  9. Now activate the addons, then restart Firefox

  Note: installing addons now I find that I can't add using the button 'Download' for the addon, I have to copy the URL of the button, paste it in a new tab and press enter

• Pavilion G6 2302 ax battery cell no. 4 tension showing o mV even after charging is complete.

  Hi guys,.

  My Pavilion g6 2302ax cell no. 4 battery voltage showing o mV even after a full charge.

  I baught my laptop 2 months before and its hardware works very well so far, I've noticed this problem. I've attached a screenshot of the HP support assistant screen. Please take a look.

  

  If anyone has an idea about this help please.

  Hello dipuab,

  Your battery test shows 0 on the fourth cell.

  There is nothing wrong with the battery, the test is designed for only three of the battery cells, test one of the tests will display 0.

  Here is a link to another post that had the same problem. Message 7 of 7.

  Hope it will be useful.

• Dell vista hp deskjet 6980 printer. printer will not print, even not a print page

  message says that there is a network connection. I don't have a network connection. In addition, message says hpdeskjet 6980 is ready, but I can not print even not a printed page. I even inserted my printer disc, but nothing happens.

  Hello

  ·         What happens when it prints a test page?

  ·         It gives an error message?

  ·         Were you able to print before?

  ·         Was there any recent changes to the computer?

  ·         How the printer is connected to the computer via USB or wireless?

  I suggest you follow the methods below and check if it helps.

  Method 1:

  I suggest to follow the steps outlined in the article below regarding The Add Printer Wizard and check if this can help resolve the issue.

  Run the Fixit tool described in the article below and check if it helps solve the issue.

  http://support.Microsoft.com/kb/314876

  Method 2:

  Also check out the link below and follow the troubleshooting steps and check if that helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  I hope this helps.

• New portable Windows 8 does not recognize the printer, even if the printer says that it is connected.

  My old laptop fried, so I bought a new laptop which had Windows 8.  My printer is a Photosmart 5510 series B111A #CQ176A and at first my printer was not compatible, so I downloaded the software from the HP that make compatible site.  It worked, but then I was printing my grades I dreamily turned off my laptop.  The printer stopped at halfway, so I turned on my computer laptop back but the printer does not continue.  I cancelled the event and tried to reprint it, but then my printer not responding.  All my reprints AND the original print stuck in the queue and my microsoft word (2013) says the printer is offline, but the printer itself said it was online and connected.  I tried the HP Scan doctor or what it's called and it said nothing was wrong and it printed a test page. However, when I tried to copy my notes he would not answer.

  Finally, I uninstalled the software and reinstalled.  He said that my printer connected successfully, but microsoft word does even not list my printer even if my printer says that it is connected.

  Nobody knows how to help me?  I'm not very technical so please, if you could provide easy to follow instructions, I would be grateful, thank you.

  Take a look at this linkHP.

• I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  I have Adobe Reader XI with the package that allows me to send a PDF file and convert PDF files to Word. When I open a pdf file and you try to find the search shows no match, even if the word I'm looking for is in the document. Suggestions how to search?

  A scanned document is an image; You can't find a picture.

  If the image contains text, recognition of characters (OCR) will convert the 'text' in the image in real text (searchable, editable).

  OCR can be performed automatically when converting a PDF to Word, using the ExportPDF service.

  To run OCR inline in a PDF document, you will need Acrobat.

• I had a breakdown and even if my host has been turned off, he showed only disconnected and HA na not kick in.

  The trouble is, my Dev Environment has worked well, showing does not and HA worked, then that my production did not.

  The cause of the blackout was a power failure that the power off switch.

  The production host is a 3850 M2 and development hosts are HS21 blades in a BladeChassis.

  What would cause the server show disconnected?

  Due to the floods here, I am unable to work and check power redundancy, or if the House of all the server went down or just simply switch.

  How storage is configured on the server that is located behind the failed switch.  It is also configured the switch failed (iscsi or nfs), or is it fiber attached?

  If its fiber attached and the other virtual machines were running, the other guests could not power on the virtual machine because files would still be locked.

  What is the configuration of your HA settings on the cluster?  Leave power on or power off the power?

  If they all leave it turned on, and then only a physical fall of the server or SAN connection would allow an HA event succeed (because file locks would be then released).  otherwise the VM running isolated, but no other host can power on the virtual machine.

  It is probably a good event to happen because it caused a power failure but not a serious enough to make your life hell, it should give you more reason to push redundant switches on the side of production to ensure that a single switch failure is not bring down the environment.

• Unified junk folder don't show Yahoo mail even when added manually

  I put folders for unified. This shows the single folder of junk mail with the name of accounts as its subfolders.

  The list in the left pane is a bit like this:
  Junk
  -GMAccount1
  -GMAccount2

  All accounts are IMAP accounts.

  I also have Yahoo IMAP account where the Junk folder is designated as mass mailings.

  Default thunderbird does not believe in junk e-mail, so what I do is:
  (1) right-click on the unified junk e-mail folder and go to properties
  (2) the title of "Select records to search" I manually add the mail folder in bulk for Yahoo accounts.

  After adding, I expect that the inscription on the left side would become:

  Junk
  -GMAccount1
  -GMAccount2
  -YahooAccountName

  But it does not show YahooAccount as a subfolder. (Even after you restart thunderbird)

  But surprisingly, when I click on the unified junk of top-level folder, then it shows emails in "Bulk Mail" in the right pane.

  Which means there's a minor display bug that does not display the folders included in the unified folder.

  Please let me know if there are good solution or please fix the bug.

  Thank you.

  I found a solution:

  Goto YahooAccount properties
  Junk mail settings
  Destination and retention
  Check the movement new unwanted messages to:
  Other: Bulk mail on YahooAccount
  Restart thunderbird

  This average thunderbird knows it of the junk mail folder, then starts it displays under folder "unified Junk."

  This solves the problem, but I guess this shouldn't be necessary.

  Any account mentioned in "Select records to search" (in the properties of the unified folder - as mentioned above), should appear under this "unified record."

• What would cause a Subvi show its FP even when it is not defined to show (by default)?

  I have a Subvi suddenly decided to show even when it should.  What kinds of things would cause this?

  Thank you!

  
  

• Police problem - all fonts show as "BOLD" even if the bold has not been successful.

  No matter what I chose to compose e-mail, for example, Times New Roman, size: 12 Pt, police the selected font will appear as if I clicked on the B for the bold. The only size font which DOES NOT appear as "BOLD" is the 8pt font. This problem of police comes little matter the type of font, I chose. For a short time today, the appearance of the police showed that the type was in CAPITAL LETTERS, even if the CAPS LOCK SHIFT key was NOT enabled. I could not return to the low case letters, so I restarted my computer, and only the UPPERCASE function had returned to normal. The "BOLD" type always appears any police, I chose, UNLESS I reduce the font size to 8 Pt, for each single font from the list of fonts in Outlook Express. Can you please explain how it happened, and most importantly, how to fix? Thank you.
  Barbara Lowell

  Hello

  Try to check and clean boot:

  http://support.Microsoft.com/kb/929135

• Whenever I try to print, I get an error of execution of data that causes the crash program (before I even chose my printer).

  It happens in Word, Adobe, IE, Chrome. I tried to turn off DEP for these prgrams, no luck. I am running XP with SP3.

  Hello

  1. What is the brand and model of the printer?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the links below.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  http://support.Microsoft.com/kb/875351

• Shows scrambled text and images when printing in line

  Hello. I have Windows XP Home Edition and using Internet Explorer 7, I have problems with printing online internet - it shows images and truncated text. I tried printing in Microsoft Word and it prints fine. It's just a problem with the printing of pages online that I'm having a problem with. I use a Canon color printer. Please help me on this. Thank you!

  Download of Firefox <-->

  The last Canon PIXMA iP1700 drivers for WIndonws XP are 26/09/07, so as long as you buy a decent time AFTER that--you probably use those.

• I want to print the data on the screen, even when the print command is not available

  When I active Meadia Player I'd like to be able to print a list of the songs in the library, Playlist, etc.

  Hi Whitepolarbear70,

  Thank you for visiting Microsoft Answers.

  I have some steps that may help you.

  Method 1

  Try to take a screenshot of the library. To do this, follow these steps:

  1 open Windows Media Player.

  2. open the library and click on the following combination of keys
  -Alt + PrtScreen/SysRq * (PrtScreen/SysRq is usually right next to the F12 key).

  4: open Paint or Microsoft Word, and then press the following key combination
  -Ctrl + V which will stick to the screenshot that you took
  3. adjust the size n PRINT

  Method 2

  You can try export playlist of media information by an application word by following the steps in the link below:

  http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/mediainfoexp.aspx

  We inform you that you will install Media exporter info. This exporter is basically designed for Media Player 9 and would work for Media player 11.

  The process is a little different:

  Follow this workaround solution to install the exporter of media:

  Step 1 - Download and install Media exporter Info

  You can try to run the program in compatibility mode for Windows XP.

  Make older programs in this version of Windows

  http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx

  Step 2 - use of the exporter to export of information media

  Open Windows Media Player.  A small Media exporter Info window must already be open.  If not, you can open it manually: on the Tools menu, go to plugins and choose the exporter of News Media.  If you do not see the Tools menu initially, just right click somewhere on the blue bar dark near the top of your window of WMP.

  Click Properties to select where the file is saved and what application to load it in.  Will the file be formatted differently depending on the application you choose, but Excel is the best option if you want to clean it to show only the artist/album names (see below).

  Click Export.   The file will be exported, but it will contain much more than just artist names and album information.

  See the link given below where the user had a similar problem.

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/adc55535-e1a5-42E7-9EA1-f93c6334b523

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless network tray icon shows yellow stars even if its wireless network.

  Hello

  The network icon used to display the star yello when wirless networks were available but not connected to wireless.

  These last days, it shows the yellow star even if the network is connected and the ToolTip, see connectivity.

  Hello

  You use Windows Wireless Management or another Manager?

  No matter what do not use that one, if there is a second turn it off.

  Jack-MVP Windows Networking. WWW.EZLAN.NET