pse11 don't make selections

Similar Questions

• I started to have some pop-under ads every time I run Firefox and uninstall instructions don't make sense, how can I stop these?

  In the last two weeks, whenever I run Firefox, a grandeur nature pop-under ad is also launched, regardless of which site I am browsing.

  The original ad was for a survey on You Tube and contains a link to coupondropdown.com, where there is a menu option for uninstalling. The uninstall instructions don't make sense, they do not mention what ad - control ads, and I can't work out what is responsible for the ads of my very basic range of ad - ons.

  The reason why I write, it is that ads increased by annoying but harmless, dangerous. The announcement today was conceived as a pop-up warning text says, ' detection: immediate Action required.» Fatal error in registry... click on 'Repair All' to eliminate all possible threats and clean your PC". I have screenshots of all the foregoing.

  I'm worried that another user, my son or mother, might take this warning seriously and install malware by accident. What can I do to prevent these ads? I expect this type of advertising malware on dubious websites, I get them when I try to access Hotmail, news, etc., so it is not the site that is originally.

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • TDSSKiller - AntiRootkit utility
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  See also

  • Cannot delete a plug-in (extension or theme)
  • Remove a toolbar that has supported your Firefox or the homepage search

• Can't 'make selection' multiple paths

  When I draw many traces, then click 'choose' it only selects the last. When I use "select path" to select all the paths, then click on 'make selection' I get "WARNING: no pixels are selected error.» It's really frustrating and I never had the problem on cs6, cs5

  See the image in the new tab or window

  

• Cannot make selections

  Hello

  I can't make selections under indicators made yellow in the timeline with the order of selection to make, but it is possible to make the same clips when setting to to use in out. But making a selection under a red light to help return the selections was possible.

  Did I miss something or someone has experienced something like this?

  I use first Pro CC 7.2.1 (4) on Mac and PC

  See you soon

  Kim

  Hi Kim DT.

  Please post on the Adobe forums,

  Please check this post, it will respond to your request.

  http://blogs.Adobe.com/PremierePro/2011/02/red-yellow-and-green-render-bars.html

  With this definition of preparatory of the road, what do mean the bars colored?

  • Green: This segment of the sequence has a preview of rendering that are associated with file. Playback will play using the rendering preview file. Full quality playback is certain to be in real time.
  • yellow: This segment of the sequence doesn't have a preview rendering that are associated with file. Reading will play in making each image just before that ICT reached it. Reading in full quality will probably be in real time (but it may not be).
  • Red: This segment of the sequence doesn't have a preview rendering that are associated with file. Reading will play in making each image just before that ICT reached it. Full quality playback will probably not in real time (but it could be).

  Kind regards

  Sandeep

• What to do when I plug an iPod classic and ikon under devices in iTunes don't highlight to make selections

  I have an old classic iPod and a brand new iMac from 2015. When I connected the iPod to download playlists, I had an ikon on the desktop, momentarily, but then disappeared. I have ikon iPod in the devices menu (version 12.3.3) iTunes, but it will not highlight to make the choice to download music manually. The computer told me something... What is the problem, and that, anyway, how I eject the iPod manually if I chose to...

  With the current iTunes, you do not select the iPod under devices in the sidebar.  The iPod appears as a button on the device on the horizontal bar that runs through the iTunes screen.  See screenshot below of the window of my iTunes (top left), showing the camera button for an iPod (circled in red).

  

  By clicking on the iPod touch is equivalent to selecting under devices for older iTunes.  You will see the settings screen for the summary of the iPod.

• Tools Page Firefox 42 Options cannot make selections

  When I select Options under the Tools menu of FF42, the page is in place but I can't make any choice - it's totally insensitive.
  Earlier versions had the box that worked. I don't like the Options does on a Web page tab or a box, I just need to make them work.
  Hate roll back 40 Firefox so that it can work.

  Hi Rondo123, your theme is very different from mine. A few themes isn't compatible with this page. What are you using it?

• 8.1 v clips in sequence only yellow.  Don't make it green.  Help!

  Working in the new V 8.1 and the clips in the order only remains yellow.  Cannot restore to the green.  Sequences of 4K using Red effects and had to be made so I can see how they work.  Any ideas?

  Thank you!

  Peter

  I thought about it.  Use encode > make it inside and out.   Do not use selection made or render effects in and out with the symbol back to the top.   They don't give you a fully rendered preview of a file.

• HP Envy 13: How to make selective print?

  Hello

  Is that possible think about selective print screen rather than the whole screen?

  Any shortcut key for this?

  Please do help me.

  Thank you.

  Rachel

  Hello @shingy21,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums, I would like to draw your attention to the HP Forums Guide first time here? Learn how to publish and more.

  I read your message on the print screen and wanted to help you!

  From my understanding, I don't think that is possible, but you can achieve your goal in using the tool at the following site: tool use capture to capture screenshots

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• HP Pavilion dv6 Notebook PC: what should be done to make the Pavilion dv6 PC support Miracast?

  Hello

  ------------------------------------

  Operating system: Windows Home 64-bit 10 (version 10.0, 10586) (10586.th2_release.151112 - 1900)
  Model: HP Pavilion dv6 Notebook PC
  Processor: Intel (r) Core i3 CPU M 350 2.27 GHz (4 CPUs), ~2.3GHz
  Miracast: Not available
  Miracast: Unsupported

  ------------------------------------

  Miracast protruding on windows 10 not cross. When I click on connect, it does not detect the Roku streaming stick when I click on "Connect". I ran a DirectX and the paper says "Miracast: not supported.

  Question: is an add on / care equipment I can reach to see that Miracast is supported? (In the same sense of how I stick to USB adapter that supports blue tooth)?.

  Seek the advice of knowledgeable people to make the lap top Miracast compatible so that I can get computer TV set.

  Thank you

  Hello @srinathkn,

  Welcome to the HP Forums!

  I read your message and understand that you try to use Miracast on your Pavilion dv6 notebook. As noted in your post and Maintenace and Service of Guide, Miracast is not supported by this type of laptop. There are a few third party options that don't use Miracast, more commonly known as transmitter and receiver HDMI systems.

  For more information please provide your product model using the link 'find my product'.

  Thanks, I look forward to your response with the result.

  If this post helped you, feel free to click on the thumbs up!

• Portable plasma via HDMI cable... Don't make any noise of tv.

  I read on many forums all weekend, this one being one of these forums, trying to figure out why I am unable to get sound from my TV when I connect my laptop up using an HDMI cable. I still have to find a solution to this problem so I created an account in the hope that someone can help me eventually. I've never tried this before so I am new to it... and my reason to do is I want to be able to take movies from my laptop and watch them on TV, so I don't have to burn it to DVD.

  I'm not very sure what information may be needed to help me with this so, if you ask please and I'll be more than happy to inform you all that I can.

  What I've done so far...

  HDMI output port on my laptop plugged directly into the HDMI 1 port on the back of my TV. I can get the picture on the tv very well... I went into panel/sounds...and control when the pc and the tv are connected I get a result of NVIDIA HDMI which shows works... the little icon thing left fluctuates up and down... But no sound coming from the tv. The default icon that displays in this area is not clickable for me and I don't know why. So I don't know what I have to do.

  If anyone can help me through this, it would be great. I'll help you in any way I can and give all information is necessary if necessary by.

  Thanks in advance.

  Shannon

  Hello

  Download the following graphic driver and Chipset drive and keep them both on your desktop.

  Driver Chipset

  NVIDIA driver

  Then, in Device Manager, open graphics cards, do a right-click on the graphics chip from Nvidia, and select Properties.  Click the driver tab, and then select uninstall.  Once completed, do the same for the for the Nvidia High Definition Audio Codec and high definition Audio Device under his video and game controllers.

  Return to the desktop and install the driver from the Chipset, then the graphics driver.  When you are done, reboot the laptop.  Check in the device manager that the Nvidia Graphics driver and Nvidia Hi definition Audio codec have reinstalled successfully and if you now see the Nvidia HDMI output option under playback devices.  Do not try to define as a device by default again, just connect to the TV and see if it works.

  Kind regards

  DP - K

• Don't make a left click or close the popup settings for Flash Player local storage

  New book from Surface, 200% display scaling. cannot left click or close the popup of local storage settings Flash Player (which is not scaled). Make a right click works, but cannot get rid of blocked dialogue. I see people saying Flash dialogues only work with the scaling to screen 100%, but this would make the screen of 3000 x 2000 pretty unusable. Is there a better solution?

  I just ordered a couple for the team the other day.  It took some time for our supplier of equipment start their storage.

  These dialog boxes are problematic for a number of reasons.  I'd love to see them disappear entirely.  In most cases, what you run is our protection fromclickjacking anti - being overzealous.  Flash Player is in an uncomfortable position, where it is difficult to ensure that we are the object of above and that our security dialogue box is not obscured by something malicious that tries to make you click on it.  This is particularly problematic if the dialog box appears on things that move, such as video.  Fixed bugs in the logic of clickjacking is a game of whack-a-mole, so usually set us on a config and finds that he has beaten another combination of factors of density/zoom screen/resolution.

  The best way to deal with the situation is to simply stop the dialog box to display in the first place.  The days when disabling Local Shared Objects in Flash you bought anything in terms of protection personal information are over long - HTML5 provides much more powerful functions to develop behavioral followed resilience.  The best approach in trying to stay private is to use only the browser incognito-private browsing mode.  This tricks Flash into thinking it has access to whatever he wants to write, but it happens in a temporary directory that is destroyed when you exit the private browsing session.

  Since Flash Player think actually that it runs with rein in Incognito mode, without dialog boxes to throw (unless you have set the default privacy preferences in the drive).  Incognito mode is far superior to management of granular controls of the Flash, because it also beats the approaches to monitoring of client - side HTML5 equivalent * and * is not usually degrade the user experience.  We do also some extra stuff to help the hurt to do server side footprints, like turning a very minimal list, sorted by alphabetical order of the policies in Incognito mode.  If you're curious about what can be done exclusively on the coast Server (and want to be depressed), check out https://panopticlick.eff.org/.

  Anyway, for this purpose, you can configure Flash Player to always allow sites to store local shared objects, or you can allow it on a site-by-site basis if it is a site of particular video or something that gives you consistent headaches.

  To do this, go to control panel > Flash Player > storage and choose an option.

  It is also interesting to note that there is a lot of superstition there since the beginning of the 1990s on the 'Flash Cookies' / shared/LSO local objects that holds true anymore.

  When you clear the cache of your browser, we remove our LSO.  The feature was scheduled for things like game save data and caching assets, but some smart marketing people find it useful to backup the data in the cookie of the user store, so that they had followed who survived a user to delete their cookies.  While the unfortunate and embarrassing, we corrected for a long time that, by adopting a behavior that we believe best match user expectations.  Unfortunately, once you get the stench on you, it is difficult to reverse.

  Hope that helps!

• can't make selection

  I can not make a selection with Photoshop elements 14, do you know what I'm doing wrong or how to fix this? Thank you

  Move the pen to 0 px (zero) in the tool options.

  

• Installation printer host desktop 9 - docs don't make sense

  I tried to install printer host on a VM Windows 7 x 86 desktop 9.0.1.  The documentation under the section titled "Add printers from host a to a virtual machine" just does not add up to - sems to Miss thing.  When I do this:

  Procedure «»

  1 Select the virtual machine, and then select VM > Settings.
  2 click the Hardware tab, select Add.
  3. in the Add Hardware Wizard, select printer and finishing.

  Default device settings are to connect the printer to the virtual machine when the virtual machine is running. »

  Step 3 when I select printer, I get a message saying "Maximum reached."   What does that mean?   I never added all printers before, this is my first attempt.   Should I remove the printer and try again?

  In addition, this last section has me confused:

  "In a print window, when you try to select a printer in Windows 7 virtual machines, you can see only the default printer, even if other printers are available. To see other printers, right click on the default printer and point to printer properties. »

  In the "Print" window I see, there is no option to right click.   If I select the properties of the printer there is another printer, it's just the Properties dialog box you wait - how the hell other printers appear in the Properties dialog box a specific printer?

  What I'm missing here?

  Maybe there is a problem with the installation of the VMware Tools on the machine.

  Try reinstalling VMware tools and make sure that the virtual printing component is selected.

• Help make selectable TileList... Code included

  I have a list with layout, TileLayout value. Without my itemrenderer, I get this behavior:

  As you can see I can choose the elements and they are highlighted in blue.

  

  However when I apply my converter component, a thumbnail is displayed and I can choose the thumbnails but they are not visually selected and are are more highlighted.

  How can I make my converter element changes color when selected?

  Also, I have allow_multiple_selection set to True. Are these items and then stored in a table? How can I access this list of selected items?

  Here is my list code

  < s:List id = "testlist" x = "198" y = "256" dataProvider = "{imageService.lastResult.images.image}" itemRenderer = "thumbrenderer" width = "912" height = "275" includeIn = "State1' allowMultipleSelection 'true' = >"
  < s:layout >
  < s:TileLayout requestedColumnCount = "3" horizontalGap = "10" verticalGap = "30" / >
  < / s:layout >

  < / s:List >

  And here is my review:

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:fx s:ItemRenderer ' http://ns.Adobe.com/MXML/2009 "
  xmlns:s = "library://ns.adobe.com/flex/spark".
  xmlns:MX = "library://ns.adobe.com/flex/mx".
  autoDrawBackground = "false" width = "250" height = "265" >
  
  < mx:Image id = 'thumb' x = '9' = "6" width = "250" height = "265" source = "{data.thumburl}" click = "thumb_clickHandler (event)" / > "
  
  < fx:Script >
  <! [CDATA]
  Import flashx.textLayout.factory.TruncationOptions;
  
  Import mx.controls.Alert;
  Import mx.events.ItemClickEvent;

  protected function thumb_clickHandler(event:MouseEvent):void
  {
  var ev:ItemClickEvent = new ItemClickEvent (ItemClickEvent.ITEM_CLICK, true);
  EV. Item = data;
  EV.index = itemIndex;
  Alert.Show (EV. Item.ImageUrl);
  dispatchEvent (ev);
  }

  
  
  []] >
  < / fx:Script >
  
  < / s:ItemRenderer >

  Try to set autoDrawBackground = "true" on the ItemRenderer.  If you want more control on the graphics and colors in each State Watch renderers here by one example: http://flexponential.com/2009/12/13/multiple-selection-in-a-spark-list-without-the-control - key /

  The selected items in a list are available through the selectedItems or selectedIndices property.

• Why don't make a click right in the menu bookmark work more? Why should I open a bookmark to change/remove favorite Manager?

  Before this update 29, I could simply right-click in the bookmarks menu on any bookmark and make everything I wanted as open its properties to change or simply delete directly from this menu. Now, all of a sudden, this context menu is all obscured. It is usable only when you go to the bookmark manager. Why was it necessary to ban people of deletion and modification of bookmarks in the menu bookmark? Why I now have to go through a few extra steps to open the Bookmarks Manager, then find the bookmark to edit or delete when I could do all this directly from the menu?

  Hello, you can try to reproduce this behavior when you start firefox in safe mode, once?

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox