PSU HELP CONSULTING

Similar Questions

• my cursor has a mind of its own-why?

  When you type in a word doc, I noticed that my cursor jumps all over the document while I type sometimes...? Why this might be happening?

  Most of the time your cursor jumps if in a laptop, the touchpad can be too sensitive.

  Check the laptop Touch Pad drivers are installed
  Go to control panel, click the mouse and then go to the TouchPad tab check the properties of the touch pad, and slow down the cursor.

  If this does not help, consult the website of the manufacturer of the computer.

  Sincerely,

  Marilyn

• PDF to print document web site

  For some reason, I cannot print a document pdf/file from a web site, Bank and supplier credit, card. When you try to open the document to print in Adobe reader and when you click on 'Open' a new window opens in Microsoft Picture Manager!  As if it was a photo...  I tried all kinds of help consultant at HP, nothing helps.

  Thank you.  Your advice worked...!

• Cannot print after reconecting the printer

  Original title: HP 6122 printer with 990c driver

  After disconnecting the printer from a computer Wndows7 and then in reconnecting, not even print a test page even if the HP deskjet 990c printer is listed as the default printer.  I have reinstalled the driver 990c, changed the port to a USB virtual port and back again to the LPT1 port. Still no answer.

  Hey Joe,

  Thanks for posting on Microsoft Community. I understand that you have a problem with printing.

  I suggest you follow the steps from the link below:

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to install the latest drivers for the printer from the HP website.

  You can check out the link below to do so:

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796821&CC=in&DLC=en&LC=en&os=4062&Product=83027&sw_lang=

  If this does not help, consult the following link:

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796821&CC=US&DLC=en&LC=en&os=4062&Product=83027&sw_lang=

  Hope that helps.

  To get help, after return. We will be happy to help you.

• Image error-

  Do not know who and how to report it, but 93884254 of the Image contains an error.

  There is no border between Nebraska and Kansas.

  I have a photoshopped in, but you might want to correct it in your records.

  HI Matt.steinruck,

  Thank you very much for the comments. We will certainly share it with our team.

  We hope everything works well.

  For help, consult:help Adobe Stock | Adobe Stock learn & support

• Where the ExtendScript Toolkit?

  I have CS5.5. Can't find it in my Applications folder. Please advise!

  You should be able to find it here

  system drive: Applications: utilities: Adobe utilities CS5:ExtendScript Toolkit CS5

  If this does not help, consult this link; - http://www.adobe.com/devnet/scripting/estk.edu.html

• I need help to upgrade my power supply 300W for a 650W PSU...

  Hello everyone, this is my first time on this forum and I have a material question that I hope someone here could answer for me? I recently bought a HPE-240f desktop PC and I want to improve my current Radeon HD5570 1 g GPU MSI 460GTX Cyclone 768D 5/OC, but unfortunately I have a Liteon PS-5301 - 08ha PSU and it is only 300W. So I think to him substituting a CORSAIR CMPSU-650TX 650W ATX12V and my question is; This power will be back in my case correctly or I have to go with an another 650W PSU? Can anyone here advice me what to do?

  Yes, I thought that I have really don't have a 650W power supply if I want a single power graphics card Nvidia 460GTX. And more I'm low on cash at the moment so the ROSWELL PSU fits in my budget. Thanks for your help, and I'll post again if I met more problems.

• Help PSU p6310y HP upgrade!

  I need to know what power supply (600W) corresponds to my case because I improve my 9100 the EVGA GTS 250 graphics card.

  any help would be appreciated!

  Thank you!

  Will suit most ATX power supplies. However, it is best to measure your exisitng PSU just to confirm and to get an idea of how much extra room is available.  A standard ATX power supply is 5.9 "5.5"to 3.5".  HP Mini-Tower cabinets are tight inside, so I wouldn't go too far outside the standard size ATX PSU.  Choose a modular power supply to help minimize wiring problems. The side of efficiency and the guarantee period are also elements to consider.  Look at the amperage + 12 volts to the PSU, you are looking to buy.  Not all power supplies are created equal.  www.Newegg.com

• HP Pavilion HPE 1090 t: could someone help me please... Desktop HP Pavilion HPE h8-1090 t CTO - PSU replacement/compatibiliy

  I just bought a new power supply (Corsair CS650M) because someone has suggested that it would be a good replacement power supply for my HP model which is HP Pavilion HPE 1090 t.   I need to know if this Corsair works and is compatible with my system, because something is not working with him directly or I did something wrong.    This is my first install and when it comes to the ins and outs of power amplification entry & exit and amperages I get so confused about this stuff.   But I think I took all the pluged connection correctly, at least when I re-plugin my old PSU after the installation to fail, I had the PC working again, what made me give confidence that I did the Corsair install correctly.  But what happens is after the installation of the unit from Corsair and turn the system he clicked power off after about 10 seconds or more and then restarted after a few seconds, then stopped again and turns off after another 10 to 15 seconds, and nothing would come up on top of the screen no more.   The first time I did the research what PSU would be compatible, I was getting conflicting results with a few places on the net saying that the majority of the HP out there (excluding some models such as the slimline) could be replaced by different manufacturers and higher power PSU, while other places I looked different.   Even the person who recommended me this power supply said in his post that he installed a Corsair HX650 model in its HP PC, and it worked very well for him.  Now, after the failure of the installation for the next few days, I did a lot more research and when I went on the site of HP and looked up the specifications of the model my PC I noticed under the power supply section, he had a heading that says "must select one of the following options" (in fact most of the different sections shows that the title too) and then he showed only two options 460W and 600W.  Then he asked me if it's the only option I get with my model.  And then I looked at my model number HP on the HP PartSurfer and under the section of the PSU, it also registers only 460W and 600W.   So who is?   I have to stay with only these options two HP or can I get a power supply with a higher power a bit then 600W from a different manufacturer that is what I want.    If I can get something that is compatible other than the options listed HP please let me know, or if this Corsair should work someone please let me know.   I need to return it otherwise.    My specs are below.

  Thank you Aaron

  HP Pavilion HPE series
  Model No.: h8-1090 t CTO Desktop PC

  Name motherboard manufacturer: IPMTB-TK Pegatron HP/Compaq name: Truckee

  PIC of the motherboard link: http://support.hp.com/us-en/product/HP-Pavilion-HP E-h8-1000-Desktop-PC-series/5080764/model/5117795...

  Original HP installed: AMD Radeon HD 6570 (Bronco) graphics card 1 GB Model: 648533-001, SP # 659355-001

  Link video card PIC: http://www.ebay.com/itm/111761368505

  Nothing has been added/modified recently real system.  Last change was the beginning of the year 2015, which was a new 2 TB HDD and added however problem memory only started about 3 weeks ago.  The Interior has been cleaned (diffuse can)

  600W Μatx Estar v5 HF PSU (Petrus)

  Information about the current hardware out of the Power Supply Unit

  Switching power supply
  Model: DPS-600WB A
  Part number: 633186-001
  600W power MAX

  Output: DC output rating (new Corsair PSU)

  + 12Va = output DC 16A = + 3.5V / + 5v / + 12v /-12v / + 5vsb

  + 12Vb = 18 a Max Load = 25 a / 25 a / 51 / 0.8 a / 3a

  + 12Vc = 12 a Max comb = 130W / 612W / 9.6W / 15W

  + 12Vd = 10A power Total Power 650W

  + 16 5.08V = side of AC input

  + 3, 3V = 15 a AC input: 100V - 240V

  + 2 5.08Vsb = current: 10A - 5A

  -12V = 0.3 frequency: 47 Hz to 63 Hz =

  Entry:

  100-127V ~, 50-60 Hz, 10 a

  200 - 240 v ~, 50-60 Hz, 4A

  You are welcome.

  Although there is a limit to the amount of power that is needed to power your computer, it uses only the amount of power it takes to power the computer correctly.  The extra power is kept in reserve for the purposes of art.  Thus, you cannot really bad the computer with extra power or amperage.  You can sleep on this point.

  Indianaak wrote:
  

  Thank you very much for your quick response, I wasn't getting anyone to answer the previous post.

  If your saying these HP spare parts are not exclusive to the company?  Some connectors may be owners, but most are not.

  It should work then?  Yes.  I've recommended hundreds of the PSU in the years I've been helping on the Forums; in fact since about 2002.

  How about the input/output & amperages of note that I registered?  As I understand not all this jargon, I want to assure you that I have / using correct notation for my system.  I don't want to fry one of my compondents with to much amperage.   Well, either I did something wrong installing or this power supply is a dud then.  Read my explanation at the top of the page.

  As I said before I pretty sure I had all the right connections, what can you tell me if it sounds right for you.  I have pluged in both connectors wired on the motherboard which were the main ATX 24pin power connector and the EPS/ATX12V 8 pin which I shared and pluged a piece of the cable labeled 'CPU' in slot 4 pins on the montherboard labeled ATX CPU.  Regarding the other split 4 pads, I don't see anywhere, it could be pluged into the motherboard.  If two 4-pin connectors were even marked, it should be good.  However, you can try to plug the other 4 pin instead of this, just to make sure that the right pair is connected to the processor power.

  My AMD Radeon HD 6570 1 GB graphics card is the type that is fed through the MB so I didn't use any of the PCI-E cables 6-8 poles.  It is very good.

  And so the only thing I had left that I have pluged the compondents of Sata cables that was my Bluray burner, my 2 TB hard drive and my USB 3.0 card.  They are very frank.

  Yet once again being installation of hardware in my system let me ask hopefully not a stupid question, but when you connect compondents Sata cable, you must have the plug-in in a particular order of wiring compondent or how do you?  I don't check the specifications of your power supply, but I think most of them have a single 12V rail.  If this is the case, you don't have to connect them to any order.  If there are two rails, it is best to divide the power of each rail.

  On my old PSU, it has an extension cable SATA used to connent card USB 3.0 which is pretty tightly squeezed between graphics card and sound card, so I guess I could use the extension cable with the new PSU POWER Sata wiring without any compatibility also publishes, right?  This should be no problem I can think of at this point.

  Thanks again for your help, I'll probably will try and plug it once more and see if I can make it work.  If this does not work for now, I strongly suggest that you contact Technical Support of Corsair for help.  They are the experts on their products and grab any errors that we do.  It is very difficult to diagnose a problem by far.  When you have done with this project, you will no longer be the excuss you are a novice. You will have a lot of knowledge that you did not when you started.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

  Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

  Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

  original title: DEVICE DRIVER has NOT been INSTALLED successfully.

  Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

  If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  J W Stuart: http://www.pagestart.com

• age of empires III ERROR 1603 consult windows install help (msi.chm) or MSDM for more information

  I tried to install age of empire III on my computer windows 7, but I got an error until I had to even insert the key (ERROR 1603 consult windows help install (msi.chm) or MSDM for more information). I tried to enter in the files and run the setup.exe as an administrator, but it did not help.

  Anyone know why this happens and how to fix it?

  AoE3 is fully compatible with Win7 and I had no problem at the facility, but it may not be compatible with

  your graphics accelerator if it's an older 'integrated' graphics chip.

  (This should show a different kind of error message, but sometimes Windows spits a seemingly unrelated error message.)

  Try to post on AOE3 forums below. There may be someone who has had the problem with the installation of the game-

  Age of Empires III heaven Forum

  Age of Empires Forums - Forums

  This thread is related to Vista, but you can find something useful-

  Installation of Age of Empires III on a Vista based computer - Microsoft Answers

  .

• In our Production, we can share the password of user of database 'Apps' with our consultants functional, although they would like to examine through fields by (help > Diagnostics > review) and here he asked the password of the user "APPS".

  In our Production, we can share the password of user of database 'Apps' with our consultants functional, although they would like to examine through fields by (help > Diagnostics > review) and here he asked the password of the user "APPS". We need to know the path where they can examine the field without knowing the password for user "apps".

  Check

  How to enforce password Protection to access the Menu help > Diagnostics > review? (Doc ID 1487534.1)

• Help! necessary for Pavilion a6210uk PSU upgrade please please...

  Please someone can give me any help in the choice of an appropriate power supply upgrade for my HP Pavilion a6210uk desktop, which, at present, has a power supply (I think that its ATX) power with a total power of 300 w maximum. What is the limit on this pc it would need additional cooling if I upgrade the PSU?

  I saw a unit ATX PSU only intrested im, its website online from Maplin England is what follows - CIT, N43GU, ATX 550W - and I already have an another PSU new in a box that I have not found out if its safe (compatible) to use in my Pavilion a6210uk pc, office

  Here are all the details of the PSU in unopened box - ACE, ATX 12v P4, version 1.3 / version2.03 switching power supply, entry CA: 230VAC, 10 has 50-60 Hz, DC OUTPUT MAX 400W (+ 3, 3V 18A) (+ 5V 20 a) (+ 12V1 8A) (+ 12V2 13A) (-12V 0. 3A) (+ 5VSB 2A) it also says on the side THIS CB FC En60950 RoHS the voltage on the box says 115Vac or 230Vac or 115Vac / 230Vac It is a British and is allowed to use in my pc above?

  I just want to be able to add a better graphics card for my pc so I can run Flight sim with higher settings, for the moment I have on board an ATI radeon Sapphire X 1650 512 MB PCI - e16 graphics card that is somehow ok with vista Home premium 32-bit base score of 4.4 graphics. I want this to be at least 5.0 or more... Please can someone give me advice thanks a lot a lot... Clivvers (England).

  CB, happy to help.

• Help: Added psu and don't remember what wires go to dvd player

  Power supply seems fine, but I don't remember what cables go abck to dvd player.   I have a black jack, like that used for power supply hard drive.   When I plug this in dvd power cable, the system does not start.

  It seems that the player requires a sata connector and power, but I want to be sure before you continue.

  The system is H8-1445.  Added Corsair 600w psu.

  Yes, it uses the same power as the hard drive connector.  Everything coming from the PSU sata power connectors will work with the DVD.

• ERROR:-1603 FATAL INSTALLATION ERROR. Consult the help of Windows Installer (Msi.chm) or MSDN for more information.

  I try to install the Microsoft Flight Simulator X game
  but I get the error message
  "ERROR:-1603 FATAL INSTALLATION ERROR.
  Get help with Windows Installer (Msi.chm) or MSDN
  For more information. »
  Can someone help me on this? I am using Windows XP Pro.

  Hello

  Can I know the computer brand and model?

  I suggest you follow these methods and check.

  Method 1: has access the below link and follow the steps mentioned and check.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package

  http://support.Microsoft.com/kb/834484

  Method 2: Refer to the following article and try the steps.

  Error message when you install a Microsoft game or a mapping program http://support.Microsoft.com/kb/258496

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  I hope this helps!