publication of CS3 settings

Similar Questions

• Publication of skin selection substitutions in CS3 settings?

  Hello

  I imported an FLV in Flash CS3 and chose my deployment option "Progressive Download from a Web Server".

  It seems none of the skins stocks make no provision for a deployment in mode 'pause', so I thought that I would just clarify that in Publsh settings. It also seems that during deployment in this way, all (or many) publication settings are under substitution or by invisible code in the generated small .swf file or in the .swf from the skin file.

  Is anyway published where the film generated loads in the browser other that integrate the video into a .swf paused and playing in the timeline? I hope I was clear enough. :-)

  Note: I did not understand what version of Actionscript as I've used in this application.

  Thanks in advance!

  Select the FLVPlayback component on the stage, go to control panel parameters of components (or components Inspector) and change the 'autoPlay' false setting.

• Publication in FCPX settings... IS THERE A WAY TO MAKE EDITING THE PARAMETERS EASIER TO HAVE FCP TO PUBLISH EACH SCHOOL SETTING? IS THERE A WAY TO "PUBLISHED IN THE WORLD" A WHOLE PROJECT OR AT LEAST PARAMETERS?

  IS THERE A WAY TO MAKE EDITING THE PARAMETERS EASIER TO HAVE FCP TO PUBLISH EACH SCHOOL SETTING?

  IS THERE A WAY TO "PUBLISHED IN THE WORLD" A WHOLE PROJECT OR AT LEAST PARAMETERS?

  Is it wise to publish all THE settings of a plugin?

  I prefer to reduce the options, for example I'm rigging 'size' to distribute only one of them-in my eyes - range 'useful '; or create by rigging the drop-down menu 'plans', for example for the color selections...

  In any case...

  'Major settings' as Transform or filling or 3D can be published, just click Reset arrow, and all the "sub menu" get published too... can't imagine how to make the publication easier...

  BTW: CAPS means YELLING on the boards...

  be nice... what goes around, comes around ...

• Publication of Flash settings

  I hope it's a simple question:

  When I test one by pressing "ctrl + Enter" flash file it creates a .swf in the same directory as my .fla

  So - the resulting .swf file really use the selected publish settings of my FLA file?  Or when you create a .swf by "ctrl + enter" does only use a parameter "default"?

  Thank you

  Hello

  When you press Ctrl + entry, it is equivalent to only publish the SWF file (no other formats even if they are selected in the publication settings dialog box) based on your publishing settings. If your FLA file is already registered, then your file under publication settings location info > Format tab for SWFreflects the path name & swf (same as your fla name & path). You can change these attributes in the publication settings dialog box, and they are reflected in your next Ctrl + Enter.

  Thank you!

• Transfer the Dreamweaver CS3 settings

  I would like to know if there is a way to transfer all my saved settings (info by FTP access, extracts, etc.), from one computer to the other. I use Dreamweaver CS3 and will soon buy a new computer. It's a simple matter to copy a folder based on the App, or something is more complex? Windows Vista 32 bit
  
  Thank you.

  Thank you all for your quick responses. I have tracked down the files and folders necessary and think that I should have no problem when the time comes. Thank you once again.

• Flash CS3 publishing settings

  In the command file/publication of Flash CS3 settings, Flash tab, there are "local playback security" which may be 'access local files' or 'network access only '. What does this parameter? Relates to know if the SWF file is located on the local computer or on the web?
  
  This is a trivial question, but I would appreciate a response. Thank you.
  

  Some of this information is out of date (IE - you can no longer use getURL ("javascript:somefunction ()");), but this page explains in detail what you are looking for.

  http://www.Adobe.com/devnet/flash/articles/fplayer8_security_04.html

• VARs in CS3?

  I can't edit Vars in ActionScript 3 in Flash CS3, it is said to have published setting for AS 2.0 or 1. So, how can I do this in AS 3.0?

  Yes, do publication for AS2 settings, remove the name of the variable and return to AS3

  and Yes, you can not use these variables more. Use the text property of the object.

• Problems of CS3 with the registration for the web and devices

  Recently, I had a problem to save my files for the Web and devices and the problem I have is that when I save the file, it registers in a version very very crisp illustration pixelated, I created.  I can easily copy and paste the file from Illustrator into Photoshop and save it like that but I would much rather just save in Illustrator.

  I'll get the CS5 package little time, however I was not sure if this problem continues also in CS5.

  It should not be a problem in CS 3 either, certainly not in CS5.

  Try this

  PC

  1. quit Illustrator.
  2. rename the AIPrefs file (for example, to AIPrefs.old) user / AppData/Roaming/Adobe/Adobe Illustrator CS3 Settings(user)folder.
  3. launch Illustrator. Illustrator creates a new preferences file.

  Also, here must be a backup of the Web folder as well trash who should also be in the same directory.

  Mac

  1. quit Illustrator.
  2. go to user/username/Library/Preferences/Adobe illustrator CS4 Settings and parameters, the entire record of the trash not only the contents of the folder...
  3. launch Illustrator. Illustrator creates a new preferences file.

  Also here must be a backup of the Web folder as well trash who should also be in the same directory

  

• Migrate from the actions of CS3 to CS4

  Hello

  I want to migrate my actions of CS3 to CS4. The CS4 is a new installation on a Windows 7 fresh, CS3 settings I only have a backup of my drive before installing new. This backup, I checked the "C:\Users\ < username > \AppData\Roaming\Adobe\Adobe Photoshop CS3\Presets\Actions" folder, but it is empty. In my CS3, I had a lot of actions, sorted into different folders. Other presets (as for turns or the mixer channels) are there, so I'm pretty confident that my backup worked correctly.

  Am I missing something here and find the CS3 stock elsewhere or are they gone for good?

  Thanks and regards, Robert

  Different folders like in different action sets in the Actions Panel, right? have you actually used the Save Actions command in the Actions panel menu? If you don't back up then try to copy this file: C:\Users\\AppData\Roaming\Adobe\Adobe Photoshop CS3\Adobe Photoshop CS3 Settings\Actions Palette.psp in the same place but with CS4 instead of CS3 in the path

• Need help with AS3 on Radio button Quiz

  I am trying to set up a quiz question multiple choice of radio button, but I have problems with some of the ACE and hoped that some of you could help me. I'm fairly new to ActionScript, but I'm trying to pick up quickly. The code is listed below. The lines of errors have been increased in size.

  Import fl.controls.RadioButtonGroup;

  
  

  var radioGroup1:RadioButtonGroup = new RadioButtonGroup ("QuestionC1");

  var totalScore:int = 0;

  var totalCorrect:int = 0;

  var totalWrong:int = 0;

  
  

  cpr1a.label = "" Complete a resuscitation ";"

  cpr1b.label = "" cardio a resuscitation ";"

  cpr1c.label = "" cardio a Revival ";"

  cpr1d.label = "" Complete a Revival ";"

  
  

  cpr1a. Group = radioGroup1;

  cpr1b. Group = radioGroup1;

  cpr1c. Group = radioGroup1;

  cpr1d. Group = radioGroup1;

  
  

  submit_btn.addEventListener (MouseEvent.CLICK, submitClick);

  
  

  function submitClick (MouseEvent): void {}

  If (radioGroup1.selection == null) { }

  return;

  }

  If (radioGroup1.selection.label == "Cardio a resuscitation") { }

  status_txt.text is radioGroup1.selection.label + "is correct!";

  totalCorrect ++;

  score_txt.text = "Correct number:" + String (totalCorrect) + "\n"; "."

  score_txt.appendText ("wrong number:" + String (totalWrong));

  }else{

  status_txt.text is radioGroup1.selection.label + "is incorrect. I'm sorry. » ;

  totalWrong ++;

  score_txt.text = "Correct number:" + String (totalCorrect) + "\n"; "."

  score_txt.appendText ("wrong number:" + String (totalWrong));

  }

  }

  I don't see where this error could occur except perhaps for a case where a radio AS2 is used because it seems that they do not have a group property, but an AS3 radio button.  Make sure that your publication of Flash settings are set to use AS3.  AS3 errors normally have error numbers that also made the mistake that you mentioned ring of a scenario of AS2.

  Here is a link to the file that I made based on your code that works very well and does not display the errors you mention.  It is a CS3 file.

  http://www.nedwebs.com/Flash/AS3_Radios.fla

• The SCORM standards for the Multi-SCO mode

  Is the only standard of SCORM 2004, which works with the Multi-SCO mode?

  The Multi-SCO mode don't dismiss other standards through publication of Captivate settings.

  It works with the two SCORM 1.2 and 2004 but not AICC or TinCan/xAPI.

• Using "Include in Quiz" to determine the completion

  Hello

  Well, that's a pretty abstract position. Here's what it is.

  Using of Cp9, I created a 'course' that does not quiz questions. It runs on a LMS system, and I want the LMS in order to return a result ' complete/incomplete.

  Under publication of Captivate settings > Quiz > Reporting, we find (1) achievement benchmarks and success criteria (2). As I understand, our LMS includes the former but not the last.

  As the course contains no quiz question, I could set up reports using views to slide. (User access sets the bar too low.) However, there is a problem being given during the course, participants various choices "branching" and so never visit all slides. I can work around this in two ways by using views of drag:

  1. I can choose 100% and branch of knowledge.

  2. I can indicate a number of slides that is less than or equal to a minimum number of slides that will go to any participant.

  However, both options present problems (on which I will not anymore).

  So I came up with one another (and simple) solution. I would like to ask those who have more experience if they see traps, that I may have missed.

  My solution is as follows. The course is divided into sections, where each section is accessible only after the previous one has been completed. (There is a table of contents, but it is blocked until that the participant fills the course - and then unlocked for review.) On the last page of the last section, there is a next button. This button, I chose "include in the questionnaire. Then, in the publication settings > Quiz > reports > performance criteria, I selected 'good for the Quiz.

  I tested this at various times on cloud of Scorm, and so far he's purring along. I wonder, however, if it wouldn't be a problem hidden here. (A lot of my 'solutions' were found to have such problems, issues that came to light in very specific situations).

  The course is one of a number of courses, and since they all use the same device, a problem here would be a headache.

  Thank you.

  Best regards

  Marvin DuBois

  Hi Marvin,.

  It was exactly the same solution I would (and have) suggested several times in this forum.

• Pixelated lines when exporting .mov

  Sorry that if this is a dumb question (I'm pretty new to Flash animation), but everytime I try to export an animation I did the final .mov seems pixelated and blurry. When I view the Flash animation, it seems clear, but the exported version is just the opposite. My document is 1920 x 1080 and 24 fps and the publication of all settings seem to them. I would really appreciate if someone could help me. Thank you!

  I think you can zoom in on the video and think that it will always be vectors. It is bound to look pixelated, if you are > 100% and you will see anti-aliasing on the big screens.

  I did a test where I took a screenshot of your MOV, your FLA running in a SWF, then I tried the code quality and grabbed the MOV and SWF for this too. I put them in four layers in Photoshop, and then assign the surface layer of Subtract. If I moved this image on one of the other three, the area became black Uni. In other words, they were all identical.

  So, I don't know why you see pixelated. Even on my non - retina 27 inch monitor anti-aliasing is difficult to notice.

  Also, what program you are viewing the MOV in?

• Operating instructions for the flying Cubes?

  Hi, can someone give advice on how / where a tutorial is for the next idea?

  I would like to create cubes 3D (possibly with a hand-drawn aesthetic) flying in a group. The idea is that the Group of cubes swoop and flies like a bird.

  Is it possible in After Effects or is it more a cinema 4 d / 3Ds MAX project type?

  Thank you!

  You can create cubes in AE using 6 squares 3D solid or shape layers, parent layers for a 3D no and then fly the autour null in a 3D space. You can also create cubes and add textures in C4D lite, do driving around the animation in the 3D application. If you want to add the swarming of behavior like a flock of birds using certain automatic behaviors and you are on a budget, then using a 3D opensource as Blender (http://www.blender.org) application will give you a bunch of tools. I think you want to make a single object of that kind of looks like a bird with a bunch of cubes, some for wings and maybe a few others for the body, and then to rig the cubes on 'bones' so that you can create wings will require complete application 3D as Blender or the version of complete C4D because C4D lite has a very limited tool set. All 3D approach will require some textures or tweaking or plug-ins to simulate hand-drawn effect.

  If you want a look designed to hand and you have some rudiments of drawing and want to learn the technique of cell animation then you can hand draw cells in Illustrator or Photoshop or same æ and then doing 2D animation there. There are a few software solutions to make animations drawn by hand, including Flash Professional (which is provided with a subscription to the CC), but there is no open source apps I know dedicated to hand-drawn animation techniques. Commercial applications run from a few dollars to a few thousand. Good technique depends on your skills and your experience, the time available yo got work on the project and what you want the project looks like when it's done.

  The best way to make a cube from 3D layers must compensate for the z value of the anchor of the same value as X and Y, then rotate the multiple faces of 90 ° 5. For example, suppose you want a cube that is 600 pixels high. Here is a step by step.

  1. Create a new publication using the settings of composition standard square pixels (HDTV 1080 29.97 for example) which is quite long to include the entire shot, you try to create
  2. Select the rectangle tool
  3. Select the fill and stroke to use
  4. While holding down the SHIFT key to draw a shape of rectangle anywhere in the model
  5. Press U twice to reveal all the modified properties of the rectangle
  6. You should see something like this:
     
  7. Set the size of the Rectangle traced 1 to 600, 600
  8. Reset the position to transform Rectangle 1 0.0 to center the rectangle in the composition Panel
  9. Click the Add button to the right of the shape 1 layer content and add paths to squirm and make some adjustments to give your cube glimpses caught something like this:
  
  
• Press the a button to reveal the anchor point of the shape layer
• Make the layer 3D shape
• The anchor point must be 0,0,0 (Note: If you use a solid 600 X 600 300, 300, 0 is the anchor point)
• 1-way Rectangle as 600, 600, that you'll want to set the z value for the anchor point to the half of the width of the rectangle then adjust the anchor of layer 0, 0, 300
• Duplicate the layer of the form 5 times
• Select all 5 layers and press the r key to reveal the orientation and rotation of each layer property
• Let the shape 1 layer to the default rotation value
• Rotation 90 ° 2 layer shape in there, 180º 3 shape layer in there, 270º 4 shape layer in there, shape layer 5 90º in x, and 270 ° 6 layer x shape so watch the layers like this:


• Add a null value to the composition and make 3D null and name Cube 1
• The value null is now at the center of the global space of composition and 6 layers as a group are arranged around the null value
• Make sure that the Parent column turns in the time line (make it visible by right-clicking in the column name bar)
• Press r or u close the layer properties, and then select all shape layers and set the parent to 1 Cube and then lock the shape layers, so your timeline looks like this:
  
• Now, you can animate the position and rotation and adjust the scale of the null value to control your cube. Add a 3D camera and have fun.
  v
• To set up a herd of these cubes or build a body unlock all layers and start duplicating. [The best way to do that is to select all six shape layers, press Ctrl/Cmnd + d then Ctrl/Cmnd +] to move duplicates to the top and repeat. When you have made all the copies that you want to lock the camera layer, press Ctrl/Cmnd + a to select all layers, hold down Ctrl/Cmnd key and select all the controllers of null and shy then all layers form like this:
  
• Click the shy skin layers third icon from the left at the top) and you have only your cube controllers to animate. Now, you can size, scale parent animated and even these together to create your bird like this:
  

This should give you an idea of the creation of a bird in flight in AE. Personally, I would probably use Blender or the full version of C4D, then import the project into AE to the final composition. Mixer has some large shader effects drawn by hand and it is much more easy to rig and animate an element like a bird.

• Cut the comp to work area

  I cut through the work area and now I want to cancel it. Is this possible?

  Cancellation of the press.

  If you have already registered and closed the program, you can adjust the length of your publication from composition settings, but you may need to move all your layers in time also.