Pull to refresh

Similar Questions

• Digital fax on computer - when the computer is offline, what is happening to the incoming fax?

  I have the HP all-in-one Officejet Pro 8600, and it is on the network.  I recently put to save incoming faxes as digital files on a computer on the network and it works perfectly when the computer is available.  My question is this: what happens to incoming, if the computer is offline or unavailable fax (as if someone shuts down the computer)?  I want to just make sure that faxes are not 'lost', and they will be printed or recoverable in some way.

  Hi Memjay,

  I understand that you have an Officejet Pro 8600 that you put in place the digital archiving of faxes to a network folder, and you have just a question about it. I will do my best to answer this question for you!

  If your computer shuts down, and the printer had to receive a fax while it was turned off, the printer should hold that fax in memory (can generally hold up to about 30 pages in memory) and then when your computer is back on and pull has refreshed (generally set to 5 or 10 minutes) faxes in memory should appear in the network on the computer file. This document of setting up digital fax HP to save faxes received on your computer has a before you Begin section that explains just that ideally, you want to leave the computer at any time, but once again the printer there little memory to contain faxes until the computer is back on and looking faxes again.

  I hope this helps to answer your question, have a great day!

• scrollTop property will randomly 0

  I implement a pull down to refresh the functionality of an application. I have used and tested the code of an example application here:

  https://github.com/BlackBerry/BB10-WebWorks-samples/tree/master/PullDownToRefresh

  During the test of the sample application and my request on a simulator bb10, I noticed that property scrollTop of the parent div that contains the div "pull to refresh" seems to pass 0 at random points. This leads to the animation of the arrow of jitter and sometimes causes demand to believe that the user pull is no longer.

  I think maybe it's because I'm using a simulator and the mouse is not correctly simulate a touch event but I don't know for sure since I don't have a z10 camera to test the application on yet. Everyone knows about this problem?

  I ran the sample application on a simulator and property scrollTop of the element "scroller" inside the listener of events scroll, here are the results:

  scrollTop: -29 app.js:3
  scrollTop: -33 app.js:3
  scrollTop: -36 app.js:3
  scrollTop: -38 app.js:3
  scrollTop: -46 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -54 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -64 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -76 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -84 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -88 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -89 app.js:3
  scrollTop: 0 app.js:3
  scrollTop: -88 app.js:3
  

  It seems that this div element's scrollTop property jump to 0 at random times when I pull it down. The same thing is happening with my application. I ran on the 10.2.1.1925 simulator. Version 10.2.0.1791 Simulator showed similar results.

• Missing blackBerry smartphone browser

  Device was scrub always upward (hourglass permanently) so I backed everything up and made a follow-up complete cleaning of a reload of the data.  Now, scrub-up problem has disappeared, but my browser disappear (as did my ability to receive emails from one of my email accounts, google maps, epocrates and my ability to delete emails from my email accounts with my phone - but these things I can probably just add or live without), so I can't get online.  Any ideas on how to get it back (preferably without gumming things upwards again if it was at all to blame)?  Thank you!

  The browser icon takes you to the interface for device for BIS? It's really really weird... Please check that... see this demo on what would look like the interface BIS and how it should be accessible:

  • http://NA.BlackBerry.com/eng/support/blackberry101/Setup.jsp#tab_tab_email

  If the icon browser really does that, then something is even worse...

  Also, try a restart appropriate batt-pull to refresh the operating system currently running:

  • Whenever random strange behaviors creep, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  If your messaging icons disappeared again after that, then do the first things.

  Best!

• The Android Version name is always "1.0".

  We build our app android using BMPS for the past years and a half and have not seen this issue. Since a few days, regardless of configuration put us in the config.xml file, built for android version still bears the name "1.0". We cannot update our app to play store because of this problem.

  Config.XML:

  <? XML version = "1.0" encoding = "UTF-8"? >

  < widget xmlns = " " http://www.w3.org/ns/widgets "

  xmlns:gap = " " http://PhoneGap.com/ns/1.0 "

  ID = "com.xxx.mobile".

  versionCode = "101".

  version = "0.9.54 - beta" >

  < name > XXX < / name >

  < description >

  / / DESC

  < / description >

  " < author href = ' http://www.example.com "email ="email"> "

  NAME OF THE APPLICATION

  < / author >

  < name of option = "android-versionCode" value = "101" / >

  < name of option = "xwalkVersion" value = "19 +" / >

  < name of option = "webView" value="org.crosswalk.engine.XWalkWebViewEngine"/ >

  < name of the option value="--disable-pull-to-refresh-effect"/ = "xwalkCommandLine" >

  < name of option = "xwalkMultipleApk" value = "true" / >

  < name of option = "loadUrlTimeoutValue" value = "700000" / >

  < name of option = "phonegap-version" value = "cli - 6.3.0" / >

  < = "permissions" option name value = "none" / >

  < name of option = value "android-build-tool" = "gradle" / >

  < name of option = "orientation" value = "portrait" / >

  < name of option = "android-targetSdkVersion" value = "22" / >

  < name of option = "target device" value = "universal" / >

  < name of option = "webviewbounce" value = "true" / >

  < name of option = "rentals-icon" value = "true" / >

  < option value = "stay webview" name = "true" / >

  < name of option = "detect types of data" value = "true" / >

  < = 'exit suspend' option name value = "false" / >

  < option value = "show-splash-screen-spinner" name = "true" / >

  < option value = "auto-hide-splash-screen" name = "true" / >

  < name of option = "disable-cursor" value = "false" / >

  < name of option = "android-minSdkVersion" value = "15" / >

  < = "android-installLocation' value = 'auto' option name / >

  < name of option = "StatusBarBackgroundColor" value = "#000000" / >

  < name of option = "BackgroundColor" value = "#000000" / >

  < name of option = "FadeSplashScreen" value = "false" / >

  < name of option = "ShowSplashScreenSpinner" value = "false" / >

  < name of option = "SplashMaintainAspectRatio" value = "false" / >

  < name of option = "SplashShowOnlyFirstTime" value = "true" / >

  < name of option = "SplashScreen" value = "screen" / >

  < name of option = "SplashScreenDelay" value = "6000" / >

  ... and so on

  Same Setup worked a few days back.

  Thanks in advance for any help. Is there anyone else who is facing the same question, too?

  Everything should be good to go now, sorry for the inconvenience.

• ADF Mobile | call web service from Java. non-reflecting values in the AMX page

  Hi all

  I am using JDEv11124 with ADF Mobile extensions39.62.64.

  My use case is as follows.

  1. my application has 2 Pages a. Login home b.

  2. in the user login Page between user name and click on the "submit" button.

  3. on the homepage I displayed the company they joined.

  4. in the "submit" button is clicked, action defined in the support bean method will be called.

  5. by supporting the action bean method, I'll call the method of the Web Service to validate the entered user name, if the entered user name is valid, that I have to post its company name in the home page.

  6. I am moving back from the web service of datacontrol in Home.amx page

  7. calling web services from Java as follows:

  GenericType = result

  (GenericType) AdfmfJavaUtilities.invokeDataControlMethod ("Comp", null, "getCompany",

  pNames, params,

  PTypes);

  System.out.println ("after the call to the service" + result.getAttributeCount ());

  8. in the Java class, I get the response correctly (as the company designating the username entered as 'SOCIETY'), where when I navigate to the home page, I don't see any results for the method return (name of the company that dropped like OutputText in Home.amx)

  Did I miss something for this. or something more that I need to do to make it work?

  Please suggest.

  Thank you

  Vieira

  Hi all

  I was able to achieve this by executing my method in bean support.

  This code is as follows:

  AdfELContext adfELContext = AdfmfJavaUtilities.getAdfELContext ();

  MethodExpression me =.

  () AdfmfJavaUtilities.getMethodExpression

  "#{bindings.retreiveLocationInformation.execute}".

  (, Object.class, Class [] {}) new;

  me. Invoke (adfELContext, new Object [] {});

  Thanks to Luc Bors WebLog Luc Bors Weblog: ADF Mobile: implementation of "Pull to refresh" model

  Kind regards

  Vieira

• The Collection Plan tables

  Hello
  
  Please let me know the tables which are filled during the Collection plan run. According to the functional behavior, the collection plan executes sub activities
  
  (i) all operations planning in ADS (Application Data Bank) are moved to the intermediate taking during program planning data table.
  (II) for the ODS load planning the entire transaction in the staging tables are moved to the ODS (operational data store).
  
  I need to know the activities of moving data in the tables during the planning data pull and program load planning ODS.
  
  Hope you understand.
  
  With respect,
  M.Raamjee

  During the collection process, Oracle first refreshes the snapshot on the EBS instance.
  Planning data pull then refreshes the CAWC st (staging) tables.  The tables are too many to list, but their names were inside st.
  for example, msc_st_system_items, msc_st_boms
  You can find them by

  SELECT * from all_tables owner WHERE = 'MSC' AND AS 'MSC_ST_ %' table_name order 2

  Load planning ODS treats st tables and load the tables of the CPSA.  In general, the name of the destination table is similar to table st (except _Pl)
  for example, msc_st_system_items-online msc_system_items
  msc_st_boms-online msc_boms
  etc.

  All the data collected in these destination tables a plan_id =-1 where the plan of real data had plan_id > 0

  Sandeep Gandhi

• Oracle of the MAF 2.2: pull down to refresh

  Hi all

  I use jdev 12.1.3

  Recently, I have updates the MAF Oracle at new 2.2 release.

  I'm exploring the new in version.

  When you use 'Pull down to Refresh', using amx: refreshContainer, I'm not able to map the required properties for the component.

  I don't know what to spend for the full "Refresh the Expression" value to amx:refreshContainer.

  I tried passing the true or false using expression EL, but it did not help me and stuck the cooling section and collapsed.

  Please let me know what could be the possible value in this property.

  If there is a working example of this component, please let me know.

  Kind regards

  KP

  no need to add anything, its depends on your company, if you use for example amx:listView inside the amx:refreshContainer you add the action to the level of amx:refreshContainer that call the java method that refresh the data in the list, it's like:

• Once I refreshed, when I go to pull down to a previous visit, it loads the address bar, but will not go on the site.

  Everything was going well until I refreshed Firefox. Since then, the address bar does not work. If I type in a website or attempt to use the drop-down menu to access a previous site, the site loads but does not "join the service or go the arrow." It is used to automatically load, now it won't load at all! I am running Windows XP

  You are running Firefox in compatibility mode for Windows 98 (NT 4.10) according to the user agent.

  • Mozilla/5.0 (Windows NT 4.10; rv:36.0) Gecko/20100101 Firefox/36.0

  Make sure that you are not Firefox running in compatibility mode.
  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• How to refresh the playlist on Android app

  There is a setting in iTunes/Windows to update the library to the cloud, it sends recent changes, but how do update you the library on the Android app so it pulls down the updates pending in the cloud? I saw him run updates from time to time, but it seems to do it randomly.

  Android app 0.9.9 version (245)

  LG V10 performer Marshmallow 6.0

  I noticed most sync of things more in a few minutes, but things like play counts can take about 24 hours to synchronize with devices.

  Also in the music of Apple on Android, when you're in the high level view of playlists you can drag and pull down to refresh.

• How to stop an application to become the highest after it refreshes?

  I'm in an application that refreshes every 60 seconds.   It should be.   I need to do.   BUT when I pull a top app I don't want to burst in the foreground, whenever it updates.    I read somewhere that it is in the foreground.    Is this something that is built into the app?  Is that a setting of I.E.8?   How can I stop it?

  [Moved from comments]

  http://pcsupport.about.com/od/WindowsXP/HT/stealingfocus02.htm

  This is for xp, you have xp?

• Error message: the selected task "{0}" no longer exists. to view the current task, click Refresh

  When I go to start Task Scheduler, I get this message "the selected task"{0}"no longer exists. to see the current tasks, click Refresh"so I go ahead and click on refresh and get the same error message. How can I solve this problem? Any help and any help would be greatly appreciated. Thank you!

  I spent a few minutes and tracked down the problem and a solution. This is a result of work files that exist in the tasks folders that do not have access to (probably) in the registry. Here's how I worked through the issue - will take time, but it has cleared up the problem completely for me:

  1. Open the Task Scheduler, and then click OK when you are prompted with the error. It may seem that you receive again and again the same error, but it is really because of the number of tasks that are broken. Make a note of the number of times that you are prompted by the error of the selected task '{0} '. This is the number of work files that are out of sync with the registry.
  2. Start with the first folder under Windows tasks (Task Scheduler (Local) \Task Scheduler Library\Microsoft\Windows), and then select each file in turn until you receive the error of the selected task '{0} '. This folder contains files that are not synchronized with the Task Scheduler.
  3. Open Windows Explorer and navigate to the folder of tasks (% SystemFolder%\Tasks\Microsoft\Windows) and look for the folder that corresponds to the folder in which you received the error.
  4. For some tasks, you will be able to determine which files need to be removed by comparing the list in the Task Scheduler with the list of files in the Explorer. Some tasks will be only one file in the Explorer, or, in one case, I had 2 and the first was absent. Once Task Scheduler encounters this error is no longer display the tasks so he does the work to get the two in sync a little harder. Once you have determined which files exist in the folder of files but do not exist in the folder of the Task Scheduler, remove these files.
  5. IMPORTANT - close and re-open the Task Scheduler. Once the error, Task Scheduler no longer displays the missions you have to close and restart in order to continue your effort of synchronization.
  6. Continue to select folders in the Task Scheduler under Windows taskbar until you encounter the error once again and repeat the process of determining which file exists on the file system, but not in the Task Scheduler.

  I had 6 files that were at odds with what was shown in the Task Scheduler. Once I deleted all the incriminated files, task scheduler has pulled up without problem.

  Good luck.

• End list ListView (Pull Up to load more)

  I have a Listview in which I would like to add more items when I am about to reach the end of the list. Currently I use onAtEndChanged signal to load more. But I would like to charge more when I'm about to reach about 80% of my list. I also use customized for my listview datamodel. The signal that will help me to get the row so that I can load more items specific row happened on my listview.

  I tried to apply it to C++, but I couldn't. Any help on this

  QVariant listitem::data(const QVariantList& indexPath)
  {
      int index = indexPath[0].toInt();
      return _itemList.at(index);
  }
  

  Hmm... More like "infinite scroll" as feature you are looking for then pull upwards to refresh. This solution load messages when scrolling an element in the view which is 12 of the bottom of the list. You could do math according to the size of your list to do 80 percent. In any case, if you just want to load more items at the end of your list, once you have scrolls some amount of your list, you can do this:

  //Connect a scroll state handler. BAM!
      ListScrollStateHandler::create(redditPostsList)
          .onFirstVisibleItemChanged(this, SLOT(onFirstVisibleItemChanged(QVariantList)));
  

  then proceed as follows:

  void App::onFirstVisibleItemChanged(QVariantList firstItem)
  {
      int listIndex = this->m_RedditPostsModel->indexOf(this->m_RedditPostsModel->data(m_CurrentFirstVisibleListItem), 0);
      qDebug() << listIndex;
          //load more posts when we are 12 posts from the bottom of the list.
      int threshold = m_CountOfPostsRetrieved - 12;
      if(listIndex > threshold)
      {
          //simulate pressing the load more button.
          callAFunctionToLoadMoreItems();
      }
  }
  

  Sorry if there are errors in this code. This is the code that I use, but I've simplified a bit I only use infinite scrolling in some cases. This solution would still be using infinite scrolling.

• My gmail does not refresh when I connect to my account.

  Original title: gmail is my sign into account but will not regenerate

  my gmail does not refresh when I connect to my account. I know I have mail in my Inbox because it is there on my phone.

  If your gmail email address is your user name Microsoft Account, it is not actually going to receive incoming emails by default.  For example, you can go to www.outlook.com and sign in with your Microsoft Account (your gmail address), but there is no email because the email is really going in the Google Web site.  There is one step more that it takes to get your gmail emails flowing through them so you options for how do.

  1. Configure your Microsoft account to 'pull' your gmail emails
     This method sets the upward so that the Microsoft Account connects to Gmail, downloads email and then displays them on your computer Windows 8.  You make this unique facility of inside Outlook.com.  I've written about how to do it on my blog here (I wrote it for a different purpose, but the steps are identical).

     If you perform this step, you can also delete your Google account from your phone and setup of your phone to synchronize with Outlook.com instead.  You will always get and send emails with your Gmail address, it uses just Outlook as server.

     or

  2. Add your Gmail for Windows 8 Mail App separately
     This option is easier to install, but I do not personally (just because of how Gmail behaves a little different). But there is no problem with him.  I've written about how to do it also with a video demonstration: Use Gmail in Windows 8.

     If you use this option, go to your Mail application settings and uncheck the "E-mail" to your Microsoft Account (the first listed email account) so that you do not have two accounts showing in your email application.

  I would like to know if you have any questions or problems.

• Partial page refresh eliminates the change table event

  I have a filter region where a user enters search criteria then a button that is defined by a da DA for the button that a refresh on a tabular presentation.

  The partial page refresh works fine, but the events of change on the fields in the form of tables fire. Once the page is submitted that those changes events start pulling again.

  We are on 4.2.2.00.11 and the latest Chrome.

  I tried Firefox and it behaved the same.

  Harry

  You make no mention of how change events when added to the fields in a table.  If they were done by a dynamic action, make sure that the scope of the event for dynamic action is set to "Dynamic" and not "static".

  -Jeff