Pump data to the directory import

Similar Questions

• BLOB data in the directory using UTL_FILE

  Hi all
  
  "I wrote a procedure to store BLOB data in the directory using * UTL_FILE.
  
  
  
  Using the package UTL_FILE, I created procedure below. Procedure runs successfully without any error, but the file is not written to the directory. Pls find my procedure below.
  * CREATE OR REPLACE PROCEDURE Write_BLOB_To_File
  AS
  v_lob_loc BLOB;
  v_buffer RAW (32767).
  v_buffer_size directory.
  v_amount directory.
  v_offset Number (38): = 1;
  v_chunksize INTEGER.
  v_out_file UTL_FILE. TYPE_DE_FICHIER;
  BEGIN
  -- | SELECT THE LOB LOCATOR
  SELECT an attachment
  IN v_lob_loc
  ATTACHMENT
  WHERE attachment_id = 720;
  -- | DISCOVER THE CHUNKSIZE FOR THAT LOB COLUMN
  v_chunksize: = DBMS_LOB. GETCHUNKSIZE (v_lob_loc);
  IF (v_chunksize < 32767) CAN
  v_buffer_size: = v_chunksize;
  ON THE OTHER
  v_buffer_size: = 32767;
  END IF;
  v_amount: = v_buffer_size;
  -- | OPENING A LOB IS OPTIONAL
  DBMS_LOB. OPEN (v_lob_loc, DBMS_LOB. LOB_READONLY);
  -- | WRITE THE CONTENT OF A LOB IN A FILE
  v_out_file: = UTL_FILE. FOPEN)
  location = > "EXAMPLE_LOB_DIR"
  filename = > "Test.doc."
  OPEN_MODE = > 'w ',.
  max_linesize = > 32767);
  While v_amount > = v_buffer_size
  LOOP
  DBMS_LOB. READ)
  lob_loc = > v_lob_loc,
  amount = > v_amount,
  offset = > v_offset,
  buffer = > v_buffer);
  v_offset: = v_offset + v_amount;
  UTL_FILE. () PUT_RAW
  file = > v_out_file,
  buffer = > v_buffer,
  AutoFlush = > true);
  UTL_FILE. FFLUSH (file = > v_out_file);
  -UTL_FILE. NEW_LINE (file = > v_out_file);
  END LOOP;
  UTL_FILE. FFLUSH (file = > v_out_file);
  UTL_FILE. FCLOSE (v_out_file);
  -- | THE LOB OF CLOSING IS REQUIRED IF YOU OPENED IT
  DBMS_LOB. Close (v_lob_loc);
  END; *
  
  
  I have provided the necessary privileges for the schema and directory. But the file is not written to the directory. can you please advise me

  OPEN_MODE-online 'w' change to open_mode-online "wb."

• storing BLOB data in the directory

  Hi all
  
  "I wrote a procedure to store BLOB data in the directory using * UTL_FILE.
  
  *
  
  Using the package UTL_FILE, I created procedure below. Procedure runs successfully without any error, but the file is not written to the directory. Pls find my procedure below.
  
  CREATE OR REPLACE PROCEDURE Write_BLOB_To_File
  AS
  v_lob_loc BLOB;
  v_buffer RAW (32767).
  v_buffer_size directory.
  v_amount directory.
  v_offset Number (38): = 1;
  v_chunksize INTEGER.
  v_out_file UTL_FILE. TYPE_DE_FICHIER;
  BEGIN
  
  -- | SELECT THE LOB LOCATOR
  
  SELECT an attachment
  IN v_lob_loc
  ATTACHMENT
  WHERE attachment_id = 720;
  
  
  -- | DISCOVER THE CHUNKSIZE FOR THAT LOB COLUMN
  v_chunksize: = DBMS_LOB. GETCHUNKSIZE (v_lob_loc);
  
  IF (v_chunksize < 32767) CAN
  v_buffer_size: = v_chunksize;
  
  ON THE OTHER
  v_buffer_size: = 32767;
  END IF;
  
  v_amount: = v_buffer_size;
  
  -- | OPENING A LOB IS OPTIONAL
  
  DBMS_LOB. OPEN (v_lob_loc, DBMS_LOB. LOB_READONLY);
  
  -- | WRITE THE CONTENT OF A LOB IN A FILE
  
  v_out_file: = UTL_FILE. FOPEN)
  location = > "EXAMPLE_LOB_DIR"
  filename = > "Test.doc."
  OPEN_MODE = > 'w ',.
  max_linesize = > 32767);
  
  
  While v_amount > = v_buffer_size
  LOOP
  
  DBMS_LOB. READ)
  lob_loc = > v_lob_loc,
  amount = > v_amount,
  offset = > v_offset,
  buffer = > v_buffer);
  
  v_offset: = v_offset + v_amount;
  
  UTL_FILE. () PUT_RAW
  file = > v_out_file,
  buffer = > v_buffer,
  AutoFlush = > true);
  
  UTL_FILE. FFLUSH (file = > v_out_file);
  
  -UTL_FILE. NEW_LINE (file = > v_out_file);
  
  END LOOP;
  
  UTL_FILE. FFLUSH (file = > v_out_file);
  
  UTL_FILE. FCLOSE (v_out_file);
  
  -- | THE LOB OF CLOSING IS REQUIRED IF YOU OPENED IT
  DBMS_LOB. Close (v_lob_loc);
  
  END;
  *
  
  I have provided the necessary privileges for the schema and directory. But the file is not written to the directory. can you please advise me

  Note the name of this forum is Developer SQL *(Not for general SQL/PLSQL questions) *, both for issues with the SQL Developer tool. Please post these questions under the dedicated SQL and PL/SQL forum only and not to repeat the discussions.

  Kind regards
  K.

• A data in the very important document, which I just changed in deleted email

  I can't believe bad luck indredible, a very long project that I worked on for weeks in an e-mail to aol using Firefox browser - I managed to complete my joy yesterday but incredibly to is did not last long - somehow all except 2 periods highlighted and deleted

  Y at - it a hope of recovery?  I didn't delete email, data that made up the e-mail have been removed.

  If this project exist right in the email? Maybe save this email as a project? I don't use a Mac, but I know that if I work in Outlook, the emails I create are saved as drafts until I send them. Someone who is familiar with email Mac would have to answer your question otherwise.

• Set deny delete the directory for everyone, but still killed deltree!

  Hello

  I have a directory that contains the important code and periodically it is cleared from my machine without my knowledge!  The directory is c:\build and for nmake reasons I subst e: c:\build.

  The removal seems to happen around the time I periodically uninstall programs I want to use the Control Panel - programs and features.  There are system restore points that correspond to the date of the directory disappears.

  I mention all the foregoing in the case where the situation tweaks reminder of someone of something obscure, like the interaction of subst with uninstall.  Note that programs that I chose to uninstall will interact in any way with my file generation.

  OK, now to the question of the subject.  I attempt to deny the deletion of the folder by following these steps:

  1. right click on c:\build and select Properties.

  2. click on the Security tab, and then click the Advanced button.

  3. click on change permissions, and then click Add.

  4 type everyone in the box enter the object name to select text box, and then click OK.

  5. change apply to: this folder only, and then click the check box delete in column refuse.  Note that I still want to be able to delete files (for example, old .obj files) so I don't want permission denied delete to extend to individual files.  I try to avoid any program / system utility deletes the entire folder!

  6. click OK, then apply to the parent area and then Yes to the dialog security of Windows and then on various dialog boxes open, OK buttons until I'm back at the office.

  Test my new Setup:

  -A open a "dos box" cmd.exe with administrator privileges.

  -typed deltree c:\build---BOOM the directory is removed.

  Thanks for your comments on what's going wrong here...

  'Everybody' group includes all users except for anonymous users.  If you connect to the machine, "Everyone" should wear on you.

  Ok...  Here's what I did...

  Right click on C :-> properties-> Security-> Advanced-> change permissions-> Add.

  In the window "Select the user..", typed in "Everyone"-> OK

  In the permissions window: click "Delete subfolders and files" in the column 'Decline', select "This folder only" in the window "apply to", then "Oked" my way, "continuous" past files that he had problems with...

  I then open the C: drive and created a new folder named 'Test' and put an empty file in it. then:

  Do a 'Testing' right click-> properties-> Security-> Advanced-> change permissions-> Add.

  In the window 'Select a user', typed in "Everyone"-> OK

  In the permissions window: you click on 'Delete' in the 'Deny' column selected "this subfolder of the folder and files" in the window "applies to the" and "Oked" my way.

  Then, I went in the C:\ directory and tried to remove "Test" by dragging it to the trash, and by selecting and hitting the 'Delete' key - as well as the removal of the command line.  In any case, he refused to delete for me.

  I don't know what you're doing differently, but for me, it works as advertised.

  HTH,

  JW

• ASO - file .dat in default directory

  Hello
  
  Our file .dat in the directory 'default' on our server is 209,715,200 that the sys admin said that we need to move it because it is too big for this directory. They are on the BSO cubes and identify a path where the 'storage '. However she does not see this option of ASO. This is not possible in the ASO and the .dat file must stay where it is? Or is there another method to store the .dat also file?

  You mean manage storage space? -http://docs.oracle.com/cd/E17236_01/epm.1112/eas_help/tablespc.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Differences between Data Pump and always by inheritance, import and export

  Hi all

  I work as a junior in my organization dba and I saw that my organization still uses legacy import and export utility instead of Oracle Data Pump.

  I want to convence my manager to change the existing deal with Oracle Data Pump, I have a meeting with them to keep my points and convence them for Oracle utility pump data.

  I have a week very convencing power but I won't miss to discover myself, I can't work myself and really a need with differences of strength against import and export, it would be really appreciated if someone can put strong points against Oracle Data pump on legacy import and export.

  Thank you

  Cabbage

  Hello

  a other people have already said the main advantage of datapump is performance - it is not just a little more fast exp/imp it is massively faster (especially when combined with parallel).

  It is also more flexible (once much more) - it will even create users with exports level schema which imp can't do for you (and it is very annoying that he could never).

  It is reusable

  It has an api plsql

  It supports all types of objects and new features (exp is not - and that alone is probably reason to spend)

  There even a 'legacy' at 11.2 mode where most of your old exp parameter file will still work with him - just change exp expdp and impdp print.

  The main obstacle to the transition to datapump seems to be all "what do you mean I have to create a directory so that it works", well who and where is my dumpfile why can't it be on my local machine. These are minor things to go well beyond.

  I suggest do you some sort of demo with real data of one of your large databases - do a full exp and a full expdp with parallel and show them the runtimes for them to compare...

  See you soon,.

  Rich

• ORA-39097: Data Pump job encountered the error unexpected-39076

  Hello world
  
  Today, I tried to take a pump dump to export my test database (specific table), the version is 10.2.0.4 on Solaris10(64-bit) and I got the following error message
  
  Work 'SYSTEM '. "" SYS_EXPORT_TABLE_23 "carried out at 09:51:36
  ORA-39097: Data Pump job encountered the error unexpected-39076
  ORA-39065: exception of unexpected master process in KUPV$ FT_INT. DELETE_JOB
  ORA-39076: cannot remove SYS_EXPORT_TABLE_23 work for the SYSTEM user
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." "KUPV$ FT_INT", line 934
  ORA-31632: main table "of the SYSTEM. SYS_EXPORT_TABLE_23"not found, invalid or unreachable
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." "KUPV$ FT_INT", line 1079
  ORA-20000: failed to send the e-mail message from pl/sql because of:
  ORA-29260: network error: Connect failed because target host or object does not exist
  ORA-39097: Data Pump job encountered the error unexpected-39076
  ORA-39065: exception unexpected master process in HAND
  ORA-39076: cannot remove SYS_EXPORT_TABLE_23 work for the SYSTEM user
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." "KUPV$ FT_INT", line 934
  ORA-31632: main table "of the SYSTEM. SYS_EXPORT_TABLE_23"not found, invalid or unreachable
  ORA-06512: at "SYS." DBMS_SYS_ERROR', line 95
  ORA-06512: at "SYS." "KUPV$ FT_INT", line 1079
  ORA-20000: failed to send the e-mail message from pl/sql because of:
  ORA-29260: network error: Connect failed because target host or object does not exist
  
  I hope that the export dumpfile is valid, but I don't know why I get this error message. One faced this kind of problem. please me tips
  
  Thank you
  
  Shan

  Once you see this:

  Work 'SYSTEM '. "" SYS_EXPORT_TABLE_23 "carried out at 09:51:36

  The Data Pump task is done with the dumpfile. It is some clean that is needed and it looks like something in the cleaning failed. Don't know what it was, but you dumpfile should be good. An easy way to test is to run impdp with sqlfile. This will make all import will do, but instead to create objects, he writes the ddl in sql file.

  Impdp directory of the user/password sqlfile = my_test.sql = your_dir dupmfile = your_dump.dmp...

  If it works, then your dumpfile should be fine. The last action of export, it is write the main table Data Pump in the dumpfile. The first thing that import is read this table. So, if you can read it in (which sqlfile impdp) your dump is good.

  Dean

• With the help of expdp/impdp in pump data

  Hi all
  
  I am newbie in oracle database through the use of data import and export oracle data pump. I use Oracle 10 g 2 on Windows 7
  
  After you create the directory object 'test_dir' and the granting of read, write privilege to user scott, I connect like scott to the database and create the table 'test' with two rows.
  
  Then I run expdp command prompt as follows:
  
  C:\users\administrator > expdp scott/tiger@orcl tables = happy test = all = TEST_DIR dumpfile = test.dmp expdp_test.log = logfile directory
  
  Export: Release 10.2.0.3.0 - Production on Monday, June 13, 2011 20:20:54
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  
  Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
  tion
  With partitioning, OLAP and Data Mining options
  Departure 'SCOTT '. "SYS_EXPORT_TABLE_01": scott/***@orcl tables = test content.
  = all = TEST_DIR dumpfile = test.dmp expdp_test.log = logfile directory
  Current estimation using BLOCKS method...
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  Total estimation using BLOCKS method: 0 KB
  Object type TABLE_EXPORT/TABLE/TABLE processing
  . . "exported"SCOTT" TEST' 0Ko 0 rows
  Table main 'SCOTT '. "" SYS_EXPORT_TABLE_01 "properly load/unloaded
  ******************************************************************************
  Empty the files together for SCOTT. SYS_EXPORT_TABLE_01 is:
  D:\DAMP\TEST. DMP
  Job 'SCOTT '. "" SYS_EXPORT_TABLE_01 "conducted at 20:21:02
  
  My question is why data pump seem to export the table 'test' without lines (that is to say the line: exported 'SCOTT'.) ("' TEST ' 0Ko 0 lines)? How can I do it with the associated export lines?
  
  
  I dropped the table test, then I ran the command impdp as follows:
  
  C:\users\administrator > impdp scott/tiger tables = content test = all = TEST_DIR dumpfile = Test.dmp impdp_test.log = logfile directory
  
  Import: Release 10.2.0.3.0 - Production on Monday, June 13, 2011 20:23:18
  
  Copyright (c) 2003, 2005, Oracle. All rights reserved.
  
  Connected to: Oracle Database 10 g Enterprise Edition release 10.2.0.3.0 - production
  tion
  With partitioning, OLAP and Data Mining options
  Table main 'SCOTT '. "' SYS_IMPORT_TABLE_01 ' properly load/unloaded
  Departure 'SCOTT '. "" SYS_IMPORT_TABLE_01 ": scott / * tables = happy test = all
  Directory = TEST_DIR dumpfile = Test.dmp logfile = impdp_test.log
  Object type TABLE_EXPORT/TABLE/TABLE processing
  Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
  . . imported 'SCOTT '. "' TEST ' 0Ko 0 rows
  Job 'SCOTT '. "" SYS_IMPORT_TABLE_01 "carried out at 20:23:21
  
  
  Then, after selection * test. No rows returned
  
  Please someone with an idea to this topic... What I expected after operation data in table view pump it could export and import table with the data if I'm not mistaken.
  
  Concerning
  Sadik

  Sadik says:
  He had two rows

  Export is disagreeing with you.
  have you COMMITTED after INSERT & before export?

• effect of pump or etl data on the materialized view logs

  Hi, we are mobile/upgrading an instance of 10g to 12 c, where one materialized view logs and expect to do one of the following:

  (1) extract/import the meta, only using data pump data and move data using an etl tool

  (2) comprehensive database extract/import using the data pump in

  are there questions that we must be aware of when the displacement of these with either scenario materialized view logs?

  Thanks for any information you can provide.

  > are there questions that we should be aware of when the displacement of these materialized view logs with either scenario?

  No problem

• Import metadata connects in online mode, but "view data" says the connection failed

  Hello

  My installation of obiee is on AIX (solutions for linux will be good). I installed successfully obiee. I created a connection odbc with no problems.

  I download and installed the dev admin too i.e. the stand-alone tool.

  Offline, the two 'import metadata' and after the table is imported, 'Examining the data' works without any problem.

  In online mode, I click on 'Import metadata' of the connection pool or file, both instantly connect. Once the table is imported, I select a column and say "Look at the data" and it says that the connection failed. Should the customer Oracle DB installed on the machine as unix? I tried to copy the file tnsnames.ora to my local computer to the OracleBI_1/network/admin directory, restart services and connected in online mode, BUT always "the connection failed".

  Could someone help me with this please? seems to be a known issue.

  Thank you

  Dan

  YES for the Oracle client.

  Check this parameter to the top of the Data Sources on Linux and UNIX - 11 g Release 1 (11.1.1)

  You can copy the admin folder or completely ignore

• import data into the different tablespace

  Hello
  
  I had exported a my schema of production data now I want to import data in the schema of the trial, I had mentioned the tablespace default for the trial scheme, but when I import data is not taking default tablespace of schema of its database taking default tablespace. How to import data into the different tablespace. In remap_tablespace where I can specify the touser.
  
  my version of oracle database:
  
  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production
  
  -------------------------------------------------------------------------------------------------------------------------------------------

  Raj wrote:
  Hello

  I had exported a my schema of production data now I want to import data in the schema of the trial, I had mentioned the tablespace default for the trial scheme, but when I import data is not taking default tablespace of schema of its database taking default tablespace. How to import data into the different tablespace. In remap_tablespace where I can specify the touser.

  my version of oracle database:

  BANNER
  ----------------------------------------------------------------
  Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
  PL/SQL Release 10.2.0.1.0 - Production
  CORE 10.2.0.1.0 Production
  AMT for 32-bit Windows: Version 10.2.0.1.0 - Production
  NLSRTL Version 10.2.0.1.0 - Production

  -------------------------------------------------------------------------------------------------------------------------------------------

  If your storage source and destination areas are different, you must use the remap_tablespace option.
  example:

  System $impdp / * directory = data_pump_dir dumpfile = logfile = schema_refresh.log remap_schema = Prd_schema:Tst_schema remap_tablespace = prd_TBS:tst:TBS schema_refresh.dmp

• Import ONLY the DATA without the firering triggers

  Hi, I'm on 10.2.0.4 on windows 2008. I did a (EXPDP) Export with data a USER ly, I want to import (IMPDP) data to the user with the option TRUNCATE.
  
  Everything looks ok before seeing that the trigger of my paintings are triggered because import no INSERTS...
  
  There are my settings:
  
  
  DUMPFILE = "DESTRUCTION_DATA.dmp"
  LOGFILE = "imp_DESTRUCTION_DATA.log"
  DIRECTORY = DATA_PUMP_DIR
  CONTENT = DATA_ONLY
  TABLE_EXISTS_ACTION = TRUNCATE
  JOB_NAME = 'xxxxxx '.
  
  What is the best way to EXPORT and IMPORT only the data of a user without when everything is triggered.
  
  What I want to do is to update my database to test with productiomn data. I don't want to DROP the user and re-create all of its objects.
  
  Edited by: Jpmill 2010-11-09 12:01

  As the destination tables have already created triggers, you must disable it manually before the impdp and allow it after.

  To disable triggers, simply run the output of the following query connected as the user owner of the data:

  SELECT 'ALTER TRIGGER ' || trigger_name || ' DISABLE;'
  FROM user_triggers;
  

  Or do the same thing with pl/sql:

  BEGIN
    FOR i IN (SELECT trigger_name FROM user_triggers) LOOP
        EXECUTE IMMEDIATE 'ALTER TRIGGER ' || i.trigger_name || ' DISABLE';
    END LOOP;
  END;
  /
  

  To allow them to return is almost the same, just change DISABLE to ACTIVATE.

  The steps are:

  1. disable triggers
  2 - impdp
  3 activate the triggers

  Concerning

• Can we import data to the server target directly without creating a dump file

  Hi all...
  
  We choose to pass patterns to the target server using the data pump in Import/export.
  
  
  in the normal case, I use that way
  
  
  1. export the drawings required in the dump by customer 10 g file.
  target 2 - required import patterns directly to the server.
  
  
  
  but when I'd rather pump data is faster and easier.
  
  
  but I have a problem here when I export the file from the server only and this file is large (schematics size 80 GB) of data.
  
  
  then I need move this file to the target. I don't like it. It will take more time.
  
  
  
  I heard of network link. Can I use this function to import data directly to the target server.
  
  
  My big concern here time.
  
  
  
  
  Thanks in advance

  Yes, if you use the option NETWORK_LINK that no dump file is created on the source server or destination. I would say that the time to complete the task is directly related to the infrastructure of network between the source and destination hosts.

• change the date on the imported photos

  I added & appoint my 175 GB of photos by digital date.  My catalogue includes a good number of photos scanned from the "old days".  To save space HARD drive on my iMac, I import photos photos as referenced photos, but they import according to the date of the analysis of the name I had given him and not and when I look at my Photos, analyzed those peaks are scattered everywhere.  I plan to remove all the photos in my pictures and then re-import them.  Is it possible to set the time of creation of an entire folder to reflect when they were actually taken vs when they have been digitized?

  I plan to remove all the photos in my pictures and then re-import them.  Is it possible to set the time of creation of an entire folder to reflect when they were actually taken vs when they have been digitized?

  You can select several photos in pictures for Mac at a time. Then use "Set Date and Time" in the picture menu.

  This setting of the selected photos capture date and time by the same fixed increment change.

  It works well, if the selected photos have been scanned roughly at the same time.  So, choose photos that were analyzed at the same time to adjust.

  If you have a photo album with a variety of scanning of the dates, but want to put all the photos on the same fixed date, use an Apple script. I posted a script in the section user Tip (Photos for Mac) that I use for my scans, see: batch Change Date and time on a fixed Date