pure install E5-573-5653

Similar Questions

• I need the part number of optical drive for my new Aspire E5-573-5653.

  I need the optical drive part number for my new Aspire E5-573-5653, I bought it for my son without realizing he did not have. I would buy it and install it. Thank you.

  I contacted Acer technician. I hope it can help you (not the same Department).

  I understand your frustration... we don't have this problem in Europe.

  I'm not an employee of Acer. I'm just a volunteer / member.

• pure install win 7 rc

  I do a clean install of Windows 7 rc on my computer laptop doesn't need all the software of hp or just drivers?

  Please tell me what software I have to do a clean install

  Here are the specifications of your laptop Compaq Presario CQ57-319WM. Here is the page of Compaq Presario CQ57-319WM Notebook PC drivers for your computer. All the drivers you need must be on this page. As you do a clean install, there is no point in trying to install all HP software (most won't install anyway).

  Again, skip the software and install only the necessary drivers.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Pure install Mavericks running?  LINC Davis?

  I'm looking to do a clean install and I use the Mavericks.  I'm just following instructions on osxdaily.com.  It is saying I need to create a boot disk using a USB stick for OS X Mavericks... to download the Mavericks since the app store, then transfer it to the bootable flash drive, but the Mavericks is no longer available on the app store so that the option is not available.

  Basically I have a 2009 MBP running Mavericks 10.9.5.  I'm looking to wipe out completely and start from scratch.  I backed up my files using a Capsule temporal but also using Time Machine to backup to an external hard drive.  I also backed up my files manually to an external hard drive as well as the use of carbon copy clone to make a complete clone of my computer.

  What are the steps to follow to accomplish this new facility?

  In addition, should once completed I upgrade to El Capitan?  I'm just doing the first?

  Thank you

  If you downloaded the Mavericks since the Mac App Store, you can either re-download it from there, or reboot with the command and R keys and perform the new installation. In both cases, you will need to be able to sign in with a login Apple previously used to download.

  Otherwise, you must upgrade to El Capitan and perform a new installation of it. Whether or not you should otherwise depends on how you use the computer and If your software is compatible.

  (138137)

• Pure install Win 7 - hybrid hard drive

  I have a HP ENVY Ultrabook 6-1030sm laptop. It uses a hard drive (hybrid) combined with ssd. I want to install a clean version of Windows 7. After you run the installer, I get an error message indicating "no hard disk found. "Click on load a driver to provide a driver for installing mass storage. I tried to copy the drivers (both exe and extracted) on USB, but after scanning the content, he always says there is no hard drive found on the selected source.
  
  Google produces an idea that I should use diskpart, select one of the disks and clean it. DiskPart tells me that there is only a single disk with 7 GB in size. I guess it's the SSD HARD drive part.
  
  Please give me help on what I have to do to install a clean version of Windows 7 and always use SSDS. Thank you!

  Hello:

  Try this...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully W7 should install.

  I had also read that info since you have a hybrid drive.

  http://Forum.NotebookReview.com/HP-Pavilion-notebooks/676213-definitive-guide-clean-install-OS-MSSD-cache-equipped-laptop-dv6t-7000-dv7t-7000-Envy17-3200-a.html

• pure install 64-bit Windows 8 on Vista 32-bit

  I did a clean install of windows 8 64-bit on my old 32-bit vista and now my windows won't start. I had a USB bootable to my windows 8 pro file. Installation went well (sometimes screen was a bit messed up http://youtu.be/yo4XC6o9HJE). I was able to give user information and make adjustments, but when windows tried to launch for the first time it hangs after windows logo screen 8. It will be completely after a few tries, but with internet connection.

  After that I was able to start on a safe mode with internet connection and the screen is really messed up as in the youtube video.

  After having tried the AutoFix, it gives this information.

  c:\windows\system32\logfiles\srt\srttrail.txt

  My computer is hp Pavilion m8156. It has a new graphic card, nvidia GeForce 210.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c01113067&lang=en&cc=us&taskI...

  Does anyone have ideas what could I do to make it work?

  Thank you

  This seems to be a common problem with the Nvidia 210 and Windows 8. Have you tried to remove the map and using the integrated graphics card?

  http://forums.techguy.org/Windows-8/1065623-GeForce-210-Windows-8-a.html

  https://forums.GeForce.com/default/topic/527817/GeForce-300-200-100-series/is-the-210-Windows-8-compatible-/

  https://forums.GeForce.com/default/topic/527915/Windows-8-GeForce-210-graphics-are-glitchy-pixelated/

• upggrading a windows xp pro service pack 3 with the new card mother and pure install using the original disk of xp with service pack 2

  I have an auto build Windows XP pro with service pack 3 that is upwards and I feel the need to upgrade to a new motherboard and processor causes memory and I know that when I do a clean install with my original disk, I lose service pack 3 that will then lose me the Microsoft support is anyway that I can backup service pack 3 for use with what will be considered a brand new computer

  See you soon

  The site is authentic.  You have two options when you do your relocation:

  Method 1

  1. Download SP3 form the Microsoft site and burn it to a cd or copy it to a flash drive.
  2. Reinstall Windows with your original Windows XP CD.
  3. Use the copy of SP3 that you burned on the CD or copied to the flash drive and update the machine to SP3.  Note that if you have an original CD of 'gold' of Windows XP without service pack that you install SP1a or SP2 before you install SP3, SP2 is available here , download and save it with SP3 before making your relocation.

  Method 2

  1. Download SP3 from the Microsoft site and it wake to your Windows XP CD.
  2. Install Windows XP with your slipstreamed CD and your installation will be in SP3, when installation is complete you will not need to install service packs, you'll just have to do some other updates that have been released after SP3.

  The http://lifehacker.com/386526/slipstream-service-pack-3-into-your-windows-xp-installation-cd is legitimate, it only gives you instructions on how to create and burn a CD of SP3 slipstreamed Windows XP.  If this seems too daunting then use method 1 to install Windows.

  Both methods are very good but method 2 allows a nicer cleaner installation, everything is installed to SP3 level and there are no remnants of previous service packs.  While creating the slipstreamed CD may appear to be a time consuming task, in the end, it will be a time saver and afterwards if you ever have problems with the installation of Windows you may need this cd SP3 slipstreamed to all repairs on the installation.  You can create the SP3 cd now and do it ready and at hand for future needs.

  John

• Pure install Win Vista x 86 HP KB2079403, KB2479943, KB2536275 (fail 0x800B0100) and KB2536275 (not 0x8007065E)

  Clean instal Win Vista x 86 HP on new SSD now in SP2. The material is a Medion Q6600 on mother MSI7366 and NVidia GeForce 9300GS map.

  Will not install KB2079403, KB2479943, KB2536275 (fail 0x800B0100) or KB2536275 (not 0x8007065E).  Suggestions how to proceed?

  I tried each individually - how know one gives what error.

  Run Update Readiness Tool and it says everything is OK. You run MS Baseline Security analyze and downloaded packages individual but can not understand the correct syntax to invoke manually by hand using pkgmgr. I'm stuck with a new installation of Vista precarious missing 4 critical fixes :(

  I could go back and start from scratch, but I think I'll finish exactly in the same place again. Have also tried AV scans of bootable CD made on another system of trust and found no evidence of malicious software with three different products.

  Is it possible to get the best diagnosis of update of windows beyond "failed with unknown cryptic error."

  Any ideas what these patches have in common, which causes them to fail on my kit?

  Thank you

  Martin Brown

  Thank you very much! These well made the case.

  I had not had as much as to put on an AV so that it was not to blame. I have no idea why Windows Update had taken against these specific fixes - they work OK on the hard drive.

  They all performed successfully, according to the newspaper.  But I came to be stuck with a 'respect' in the automatic mode of updates for the last KB2536275 tag applied. He thinks that the patch should always be applied (and running it still does not work).

  Correction - it takes the system a heck of a lot of time to notice that the patch is applied and removed from the list (at least 2 reboots and the time it took me to write this letter) to do. Now, everything is good on the SSD and a nice green checkmark shows that there are no outstanding update!

  Thanks again it was exactly what I need.

  BTW How did you find these .msu files? When I went before all I could find were cryptic and opaque. CAB files with names absolutely inpenetrable, my question at the beginning was to know how to apply them as pkgmgr syntax is not really obvious from the help page.

  They are much more user friendly they are autonomous and run after the download.

• Pure install Windows8 on Dell XPS one 27

  Hey there

  I buy a Dell XPS 27 last week, unfortunately it is installed with a windows 7.

  When I try to install Windows 8 Pro I can not find any hard disk-> RAID is installed in cache Mode with the mSata card.

  Which driver should I use to do the 2 TB harddiscdrive visible in the installation menu?

  Thank you very much

  Reto

  PS: now I have upgraded Windows 7 installation with windows 8-> Windows Update service does not work (error triggered anytime I'll reboot the system)

  When you install the DELL XPS One 27 clean you MUST have the INTEL RAPIDSTORAGE driver on memoryStick.

  Use Windows 8 disc and start with F12 Commandbutton installation (Start menu)!

  Following the installation and use manuallinstallation option!

  Now that you see a clear list of the hard drives-> it's failure, but I have the solution!

  You can see the "Load driver" button on the left Push it!

  Now you can load your memoryStick with the unzipped driver of intel (x 64) rapidstorage!

  The installation routine find now a driver for XPS-> install

  After the installation of the driver-> all hard drives are displayed in the list.

  Best regards

• Pure install Dell Inspiron 14R N4010

  I'm having great trouble to do a clean install on my laptop. I have run all Diagnostics. I have the original installation disc and I even tried the Win7 Iso from microsoft. Thinking maybe the installation disc was bad. When I do the install, it goes through all but the final step. It restarts to resume Setup. But she keeps only the facility for a few minutes before he gives a BSOD. It then restarts and when it's done restart it says that cannot continue the installation. This happens every time. I worked on it for more than a week. I have no idea where to go from here. I have no idea what I can do wrong. I'm pretty good with computers and have never had difficulty making a facility like this before.

  I would greatly appreciate any help

  Bill

  It is without doubt the Malware that slowed the computer down and prevented reinstall it. Ubuntu has a format better that the Windows disc so wipe the malware and allowing installation.

  DBAN Darik Nuke and Boot and is a utility that securely erases the hard drive of all data. It is essentially the most through free format, and I advise to use it when its a Malware program was suspected or computer is given out or sold.

• Pure install the OEM Version of Windows 7 re-Boot Loop after the message "preparing system for use of handguns."

  Thanks in advance for any help...

  I tried to install the OEM version of windows 7, but after "successful installation" restart the computer and it posts, I see the Windows logo, preparing for the first time use... Nothing that he stops, then reeboots.

  My characteristics are the following: I have a motherboard ASUS P5KPL-CM, processor E5200 Intel Duo Core, 4 GB RAM, 1.5 TB hard and a Radeon HD 4870 graphics card. I built myself this PC. It was Windows XP, but I formatted the hard drive to do a clean install, so now I we a Creek so to speak. Help please?

  So I fixed it!

  I do not know what was causing the boot loop, but the solution was simple. I removed my second hard drive, my video card and 2 GB of ram. I've heard say that windows 7 like no more than 2 GB of ram to install. I reinstalled from the disk, and all is well. If anyone else has this problem, it's worth a try.

• Pure install W7 Pro 64-bit and activate with a product key and license of W7 pro upgrade.

  As part of the upgrade of the hard drive in my laptop, I want to do a clean installation of Windows 7 Pro 64 bit.  My current license is an upgrade to W7 Home Premium 64 bit I bought after getting the laptop (several years ago).

  Can I install the ISO Digital River Win7Pro64 I downloaded and activate it using my current license?

  Only if the Windows 7 Professional 64 bit license is an upgrade or full version, not an Express upgrade.

  If it is, then Yes, you can download Windows 7 Professional 64 bit from Digital River and use it with your product key.

  If your computer comes with a qualifying previous license such as Windows Vista or Windows XP and the certificate of authenticity is still attached to the machine in good condition, then the COST is reason enough to represent the compliance to the software license agreement. No previous required software installation, which means you can do a clean install with Windows 7 Upgrade disk.

  How to do a clean install with upgrade disc:

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Pure install new version (upgrade) at the old version (full) not installed?

  I just had a fleet of hard drive and so I wanted to reinstall Lightroom 6 but I received a message that it could not find lightroom 5 anywhere.

  It's because I had not installed.  Initially, I bought 5, then upgraded to 6.  The new drive I was trying to install the upgrade to 6 without installing 5 first (you know, 'clean' install).

  A clean installation is possible?  How? Or do I have to install 5 first and then proceed to 6?

  So nevermind, read the installation invites more carefully.  Complete when it cannot find the version that you select the one that bought you in a drop-down list, and enter the appropriate serial number.  So here it goes.

• Pure install mac without disabling, how to activate it again?

  Dear all,

  Today, I installed a clean version of Mac OS. I did not remove the creative cloud, or the installed application, and or disconnected / deactivated my account.

  On my macbook evrything works fine, but I'm not able to install photoshop etc. in normal mode on my mac.

  How can I solve this problem? Other recording cloud-based software offers a portal in which you can disable installed previous. Does Adobe offer something like that?

  I appreciate your help,

  Yours sincerely,

  Pieter Vliegenthart

  Hello

  Please see Learn how to enable or disable Adobe apps.

  If you encounter an error, please see solutions to the activation errors that may occur when you launch Adobe apps.

  Kind regards

  Sheena

• x 201-pure install no microphone after

  Hello

  After I did a clean install of win 7 x 64 on my x 201, I installed the connexant 20585 driver, but no microphone is installed. What can I do?

  I check in the BIOS and the microphone is Enable. In Device Manager, the connexant is there and high definition audio intel too.

  I search on the internet but no real answers. I read that maybe he can work with old drivers like 4.95.31, but I'm not... Can someone point me to a link?

  Thank you for your advice and sorry for my bad English...

  The only thing I can recommend is to go to Driverpacks.net , click on downloads, click on vista on the side, sort by 64 bit and try all the audio modules. I'd start first with the older packs. Most of the time vista drivers work on Win7.