ISE 1.2 - begging CWA provisioning with anchor WLC

Similar Questions

• The WLAN with anchor WLC - problems of roaming

  Hello

  my wireless network is 3 WLC 4402 who manage 40 APs.

  I have a fourth WLC that I installed it on my DMZ for comments vlan anchorage authentication and web.

  Everiting works fine but I have a problem:

  If my client is associated with a gateway and then I authenticate I'm willing to do traffic. As soon as my client passes to a managed by a different WLC access point, I need to authenticate again. If I wander to the first access point, I need to authenticate again.

  In my WLAN guest, I use WEB authentication provided by the web server internal to the WLC anchor.

  Thnks everyone

  Here are my conclusions, I have attached. This should solve your problem. First thing to do is change the VIP of wlc1, wlc2 and wlc3 to 1.1.1.1, then restart of the wlc. You can keep the VIP wlcanchor as 1.1.1.4. Look at the other suggestions I posted.

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• Personal warping of music with anchor points?

  I need to get a model of very specific chain with a musical score (2 measures). When I take the steps and back up I can use string functions that do not include a precise control. I would like to take 2 measures, like a 'flag' warp and twist with anchor points, but this does not seem possible. Any help?

  Make art artbrush out of it. Draw a curved line, and then apply to the brush.

  You can also refine a deformation of the envelope using the gradient mesh tool. But it does not work when you apply the deformation under effect. It only works when you apply good object > envelope.

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• Drop-down menu used with anchor on the long table of data links

  Hello

  I have a page on our site where we used a drop shape with anchor tags to let the visitor easy access to specific locations within a long table of data on the same page. Recently, I noticed that the anchors are walking around is no longer the tags in the page but only the beginning of the table anyway. I don't know if over time a few additional codes may have been added to the page that is not in conflict with the form of drop down menu, or if it's something else. I've been agonizing about this for awhile now and unable to fix. I'm hoping a new set of eyes will revisit the issue. the url is http://www.vectron.com/products/saw/saw.htm

  Thank you

  Looks like there are a good number of errors html on this page, some of them have to do with using the code of the named anchor.

  Looks like you have placed the anchors between the openingand the child of the opening. Content cannot go there, move them in theTags and see if that helps.

  It could be something else however, html errors are one of the main causes of the problems of display/functionality. Visit the validator to http://validator.w3.org to clean up your errors. If you work with the code clean and correctly positioned anchors, after return and we can take a closer look.

• The site drifting to the left when you browse with anchors

  Hello.

  I have set up my site to muse on a single vertical scrolling page with a top-nav than links to anchors throughout the body further to the bottom of the page. However, when I saw in Muse or preview in the browser and click on a link in the horizontal nav top site skid to the left as it scrolls to the bottom of the page automatically the anchor.

  It seems do not depend on where the anchors are aligned horizontally on the page but I can't get a consistent behavior to help out the.

  I started with anchors all lined up on the left guide. which produces the initial problem.

  Then, I tried with them along the edge of the document pane at the outer edge of the margin and got a little less drift.

  I tried aligning with left alignment tool and that put them right on the edge of the page where it meets the margin, but I always drift.

  It seems that if I align one or 2 anchors more left the others I have it does not derive between them, but only to those who are more to the right. If they are all aligned on the same place but then she drifts left each time.

  Any help would be greatly appreciated. I've been playing with this thing for far too long.

  Hey, I had same issue and put a verticle guide in about 100 pixels to the left. Then I arranged all the anchors is perfectly centered on this guide, that I scrolled to the bottom of the page. I'm used to a layer called "anchor" and each of them keeping there and nothing else. It clears up completely moving in all browsers. Hope this helps your project as well. I don't know why it worked, but it did.

• How to add textframe with anchor at each end of para

  I want to add textframe end each of paragraphs with anchor. Can anyone help on this?

  Hi N! evil,

  Please try the JS code below.

  app.activeDocument.stories.everyItem().paragraphs.everyItem().insertionPoints[-1].textFrames.add()
  

  THX,

  csm_phil

• AP groups with anchor comments

  Hello

  I need to use groups of AP for guest ssid and this is a scenario of controller of anchorage. Is it possible to configure an ssid for comments and this ssid is put in different groups of ap in different VLANS on the controller local and anchored on the anchor comments controller? How can I configure this anchor? Can I put different corresponding interfaces on the anchor wlc and make several for different groups of ap dhcp scopes?

  concerning

  Joe

  Joe,

  Currently, you cannot base the anchor on the AP group.  It is based only on the SSID.

  Now, do you really need to split the guest in different subnets?  Or are you concerned about groups of AP?

  If you really want to break the prompt to different subnets, then you will need to create a different SSID on the inside and controller of anchorage.  Anchor, then link to the appropriate interface.

  If you are concerned about the AP group, don't be.  Everything simply because you use the AP group, doesn't mean that all the ssid of comments cannot bind to the same interface, they can.  You can even create a dummy interface on the internal WLC, so that if the anchor does not work, they do not have an address.

  See you soon,.
  Steve

  --

  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• Requirements of the mobility for the comments of anchor WLC group

  Hello-

  I always assumed that you cannot create a tunnel between a local WLC and an anchor WLC comments that are in different groups of mobility.   However, I was told recently (no more details) that it is possible.  So I put to test this.

  I'm trying one of my local WLCs SSID comments point to an anchor of WLC comments in a different group of mobility.   I have a forthcoming maintenance window and I'm looking to anchor clients on a campus at anchor WLC on the campus on the other for the customer service does not lower.   Each campus is that it's mobility group.   Trying to set up I went to the "mobility anchors" screen for the SSID guest on one of the local WLCs and I cannot add anchor WLC on campus on the other because it is not in the drop-down list.  This is because it is not in the same mobility group.   So my question is how do customers of anchor across a local WLC in a group of mobility to a WLC anchor in another group of mobility?

  To me it seems not possible without major configuration changes.   I don't want to reconfigure / rebuild mobility groups.

  Thank you

  Chuck

  Not only is it possible, that I recommend. However, you can be confusing to some concepts.

  The mobility group is different from that of the field of mobility.  Generally, I am referring to group mobility as these WLCs with the name of the default mobility group and the field of mobility than the entire list of mobility (where you can set up to 72 controllers belonging to various groups of mobility).

  The point is that GroupA and WLCs of to WLCs 1-10 11-20 are GroupB, anchor to work, you at least need to add anchor to the mobility list wlc abroad and vice versa.

  If you notice, when you add an entry of mobility to the list, it should ask you for mobility group. If you leave this field empty, it must default to that of the WLC, but on controllers GroupA, you could define GroupB controllers (and specific group b) and then you should now have the mobility between your controllers and configuration of the anchor will be your anchor in the menu...

  Who is?

• With the help of new access points with old WLC 4100; LWAPP layer 2 switching 3-tier

  Hi all

  We currently use two solutions Wiresless LAN - a 10 AP1230 access points-based autonomous (5 years) and a solution based on a Cisco WLC 4100 (4112, running 3.2) with 12 AP1010 LWAPP access points.

  First thing, we are considering to replace the stand-alone solution with the WLC one. However, I'm not sure if we can use the new access points such as the LAP1041N or the LAP1252G with our current 4100 WLC. Access reported data sheets 'Cisco Unified Wireless Network Software Release 7.0 or later version' 'software '. Does this mean that these access points can only be used with controllers running 7.0 or later?

  If we are unable to use the new access points with our current WLC and need to buy a new controller: can we use access points AP1010 current with a new WLC as the Cisco 4402?

  Second thing, it is that we want to expand the networks configured on the WLC 4100 to another site that is connected via VPN wireless. Wireless Setup guide indicates that the LWAPP mode can be changed from Layer 2 to 3 layers so that the access points can be configured with an IP address, which allows you to place access points basically anywhere as long as IP connectivity exists between the AP and the WLC.

  Y does it as described in a document with the change of mode LWAPP layer 2 to 3 layers? Or ist just the following steps (if I understand correctly):

  -Change the Mode of Transport LWAPP on the controller of layer 2 to 3 layers

  -Creation of a PA-manager interface with an IP address in the same subnet as the management interface (tried that, without changing LWAPP mode transport first and not was not possible - error)

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Is it really just as simple as that? All information about it is very appreciated!

  / edit: I would also like to know if the 1260 series access point are backward compatible with 802. 11B. Whereas it is stated in 1040 and 1250 for example series data sheets, it is not particularly mentioned in 1260 data sheet.

  Thank you

  Michael

  Well, let's start with the simple question/answer

  With regard to different sites:

  -Configure option DHCP 43 with the IP address of the WLC or DNS with CISCO-LWAPP - CONTROLLER.localdomain

  -Make sure that the interface ap - manager can reach points on the different site

  Yes, it's as simple as that.

  As for other issues, looks like you would be better served with a forklift upgrade.  New controllers and new AP.

  Now, the AP 1230/1240/1250. all work on the 4.2, 1140 code starts with 5.2 and 1040/3500/1260 are 7.0

  The AP 1000 series is not supported after 4.2 code.

  Refer to here for the complete list of the AP and taken codes supported:

  http://www.Cisco.com/en/us/docs/wireless/controller/release/notes/crn7.0.html#wp610751

  From what I see, the 4100 is not supported after the train of 3.2.

  So, it really depends on what you are trying to accomplish with the upgrade.  If you are looking for a 80.211n support, you really want to be 5.2 or better, we had some problems with MRR + 40 Mhz channels, 4.2, 5 GHz band only.

• Cisco ISE 802.1 X Client Provisioning

  Hello

  I have a customer requirement ISE provisioning for Windows and mac. I have the following configuration:

  1 2 SSID, comments and employees

  2. guest of free access

  3. employee is 802.1 x eap-peap (name of user and password)

  I was wondering if the client local administrator privilege is required for 802.1 x windows client provisioning? Consider me it necessary for MAC OS however not too sure if it may be required for Windows?

  Example employee a. connect the SSID and redirection to the web portal of comments. During his connection, they will be presented with the device registration portal. To be presented by the ISE on the wizard of supplication, they will be asked for administrator/local domain admin privilege install wizard begging package/supply agent successfully?

  Any suggestion is appreciated.

  Thank you.

  Yes, you need admin rights to install agent

• Cisco ISE posture assessment and client provisioning

  Hello

  I have the Cisco ISE and Cisco IOS device. I configured the RADIUS between these devices.

  Also, I configured RADIUSbetween ISE of Cisco and Cisco ASA. Now I want to know that how to posture assessment for these devices (ISE of Cisco and Cisco ASA or ISE Cisco Cisco IOS). Please give me the steps together for assesment for cisco ios device posture in Cisco ise.

  In addition, please give me related to posture assessment and the provisioning client logs.

  Thanks in advance.

  You can go through the list link below to download a PDF link

  Assessment of the posture with ISE.

  http://www.Cisco.com/Web/CZ/expo2012/PDF/T_SECA4_ISE_Posture_Gorgy_Acs.PDF

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• Safari freezes on link with anchor

  Hello

  https://translate.Twitter.com/Forum/forums/English-UK/topics/7000?page=5#post-54 600

  Note that this link has a #anchor at the end. When I try to open it with my mini iPad Safari browser (iOS 8) it causes app to freeze and when reopened, it freezes again if you try to do something. At the opening of the story, it is empty; When you try to type in a URL, the entry does not work.

  It's really annoying and I'm trying to avoid, but if I accidentally type one, I have to delete ALL data, cookies, etc., which is the worst because you have to connect to all your Web sites over and over again.

  Apparently some people have had this problem with Desktop Google Chrome too, so it's definitely a problem of coding the site.

  This happened to you too? What can I do to fix the freeze without deleting anything? I have tried the lock + home force shutdown, but it does nothing. Do you know where I can ask someone to examine what is causing the anchor all plant? I'm not a computer or coding knowledge, so if you understand how it works I got appreaciate if you look in this.

  Thank you!

  'Works for me.' You are using Safari on iOS 9.3.2. You say that you did a restart, but it does nothing. Do you mean it does not restart, or it does not help? Looks like it is a problem with your iPad, and not on the site.

  You have a reason to not update to the current iOS?

• Secondary ISE cannot join the head node with error message

  Hello

  I just installed the secondary ISE and made the following points, but when I try to reach the head node, I received the cannot authenticate the primary ISE, please check the server or the certificate and try again.

  -promote the secondary image of autonomous primary

  -export the seconary cert self

  -import the cert in primary school

  -try to add not on the used secondary IP and host with super admin user name

  I noticed one thing that instruction on the ISE 1.1.1 import cert on mentioned primary section:

  1. Choose Administration > system > certificates.
  2. In operations of certificate on the left navigation pane, click certificate authority certificates.

  but there is no certificate authority certificates in the left pane. I chose to store the certificates instead

  

  any suggestions?

  Hello

  Did you put the primary secondary node? You tried to save the node in the wrong direction. To register with the primary node of a node, the application for registration must be initiated from the primary node.

  Thank you

  Tarik Admani
  * Please note the useful messages *.