pure install win 7 rc

Similar Questions

• Pure install Win Vista x 86 HP KB2079403, KB2479943, KB2536275 (fail 0x800B0100) and KB2536275 (not 0x8007065E)

  Clean instal Win Vista x 86 HP on new SSD now in SP2. The material is a Medion Q6600 on mother MSI7366 and NVidia GeForce 9300GS map.

  Will not install KB2079403, KB2479943, KB2536275 (fail 0x800B0100) or KB2536275 (not 0x8007065E).  Suggestions how to proceed?

  I tried each individually - how know one gives what error.

  Run Update Readiness Tool and it says everything is OK. You run MS Baseline Security analyze and downloaded packages individual but can not understand the correct syntax to invoke manually by hand using pkgmgr. I'm stuck with a new installation of Vista precarious missing 4 critical fixes :(

  I could go back and start from scratch, but I think I'll finish exactly in the same place again. Have also tried AV scans of bootable CD made on another system of trust and found no evidence of malicious software with three different products.

  Is it possible to get the best diagnosis of update of windows beyond "failed with unknown cryptic error."

  Any ideas what these patches have in common, which causes them to fail on my kit?

  Thank you

  Martin Brown

  Thank you very much! These well made the case.

  I had not had as much as to put on an AV so that it was not to blame. I have no idea why Windows Update had taken against these specific fixes - they work OK on the hard drive.

  They all performed successfully, according to the newspaper.  But I came to be stuck with a 'respect' in the automatic mode of updates for the last KB2536275 tag applied. He thinks that the patch should always be applied (and running it still does not work).

  Correction - it takes the system a heck of a lot of time to notice that the patch is applied and removed from the list (at least 2 reboots and the time it took me to write this letter) to do. Now, everything is good on the SSD and a nice green checkmark shows that there are no outstanding update!

  Thanks again it was exactly what I need.

  BTW How did you find these .msu files? When I went before all I could find were cryptic and opaque. CAB files with names absolutely inpenetrable, my question at the beginning was to know how to apply them as pkgmgr syntax is not really obvious from the help page.

  They are much more user friendly they are autonomous and run after the download.

• Pure install Win 7 - hybrid hard drive

  I have a HP ENVY Ultrabook 6-1030sm laptop. It uses a hard drive (hybrid) combined with ssd. I want to install a clean version of Windows 7. After you run the installer, I get an error message indicating "no hard disk found. "Click on load a driver to provide a driver for installing mass storage. I tried to copy the drivers (both exe and extracted) on USB, but after scanning the content, he always says there is no hard drive found on the selected source.
  
  Google produces an idea that I should use diskpart, select one of the disks and clean it. DiskPart tells me that there is only a single disk with 7 GB in size. I guess it's the SSD HARD drive part.
  
  Please give me help on what I have to do to install a clean version of Windows 7 and always use SSDS. Thank you!

  Hello:

  Try this...

  Download the drivers from this link below (first or second file listed - 32 or 64 bit depending on the case).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=23060&keyword=Intel+RAPI...

  Extract the files on a usb flash drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and hopefully W7 should install.

  I had also read that info since you have a hybrid drive.

  http://Forum.NotebookReview.com/HP-Pavilion-notebooks/676213-definitive-guide-clean-install-OS-MSSD-cache-equipped-laptop-dv6t-7000-dv7t-7000-Envy17-3200-a.html

• Can I install Win 7 Home 64 bit on Win 7 Pro 32 bit

  Current running Win 7 Pro 32 bit, need to upgrade to 64 - bit and can not really afford to pay the Tagus almost $300 price for Win 7 Pro 64.  What I peux/how to install Win 7 Home 64 bit on my machine?  Do not really need the Win 7 pro feature.

  You must perform a 'custom' / pure install the 64-bit version because there is no "Upgrade" path

  This means that you must back up all your important data (Documents, music, photos, video, Etc.) to external media. In addition, you will have to reinstall your applications once installed the 64 bit version of Windows, so round up all the media application you and product keys before you start.

  Also create an image backup of your version of 32-bit as a fallback option just in case there are questions.

  Then, download the device drivers 64-bit on the web support site you PC from the manufacturer and burn them on a CD.

  Now you are ready to start the 64-bit installation.

  No need to buy the home Premuim

  If you have a business retail or OEM of Windows 7 Pro version, you can download the. ISO file listed below, create a bootable DVD using Image Burn and then install the 64-bit version of Pro using your existing 32-bit product key located on the bottom of your laptop or on the side of the cover of a desktop PC to activate Windows by phone if necessary.

  =================================================

  Download Windows 7 proper. ISO file (must match for your product key version)

  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  After you download the .iso file using ImgBurn or gear to create a DVD ISO bootable.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (The steps are the same, except that you do not create a repair disk but complete an installation DVD)

  Note: Always use DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Boot camp install Win 7 on iMac 27 "(ultimo 2009)"

  Hello

  I am experiencing a problem installing Win 7 on my iMac 27 "(ultimo 2009)." I got this version installed two years without a problem, but now it concerns me.

  When you create the partition, bootcamp and starting from the Win 7 DVD I am able to install it without problem. When the PC reboots after you download windows support on my USB, install windows and is about to start Windows for the first time, it freezes and the screen is all black.

  I read on the support site you need to create and image of the Win 7 dvd which should be used in conjunction with boot camp, but I can't choose this option (it simply is not here) "disk image", when using boot camp.

  So what to do?

  /

  lanieldk

  Please see Boot Camp: iMac displays a black screen during installation of Windows 7 - Apple support .

• Since I installed Win 8 How can I get the + for new tab show?

  Since I installed Win 8, + new tab is more to the right of the line of the tab. How can I get that back? Any help would be appreciated.

  Right-click on the taskbar and press 'Customize' or reset the toolbars by removing a file localstore.rdf.

  See:

  • The back, home, bookmarks navigation buttons and recharge are missing
  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Cannot install Win 8 - Satellite Pro C660 does not detect HARD drive

  Hello

  My HARD drive died, so I decided to upgrade my Satellite Pro C660 - 1 9 to an SSD.
  I made a USB bootable with Win8 and starts very well.

  The problem is that it does not detect my SSD, so I can proceed with the installation.
  SSD appears in BIOS but not in Windows Installer.
  He said that there is a missing driver.

  I downloaded the AHCI drivers (XP, only ones available) and even in this case, after you have selected the only rider that appears, it says no new device found.

  I tried to change the SATA from AHCI mode to compatibility mode and it's the same thing...

  What can I do?

  Thanks for the help.
  Best regards
  Bruno Moreira

  More old Windows XP need a driver AHCI Intel's but I think this isn't a problem with SATA driver missing because as far as I know Windows 8 as well as Win 8.1 already contains the drivers to recognize the SSD or HARD disk drive.
  In addition, the installation of the OS should be possible even if the driver would be added for this procedure, you must use the "compatibility" mode
  As you say, the compatibility mode is not working too, so I think there is another problem.

  However, page driver Toshiba also provides a driver Intel RST (Intel Rapid Storage Technology) (Windows 8 - updated) you can try to add during the installation of the OS.

  But I m wondering if you would be able to install this Win 8 on common SATA HDD.
  Have you tried to format the SSD using a different computer, then install Win 8?
  Give it a try.

• How to install Win 7 on Satellite P300?

  I have a laptop Toshiba Satellite P300. When I bought it, I had to this topic Vista Edition home premium. Now, I tried to install Win 7.
  I have the DVD of Win 7 Professional but when I want to boot from the DVD win 7 it wouldn t accept and the boot PC always from the hard drive even when I changed it on the BIOS as it doesn t recognize. I tried with another Win 7 DVD to format the hard drive and install Windows 7 as the normal procedure, but Toshiba doesn't recognize any DVD Win 7, it acknowledges that its original DVD system (hddrecovery files that combines the win vista and all the drivers of Toshiba for laptop, as you know).

  So, how to format the pc and install Win 7 (if you run the installer of win 7 on the computer I install Win 7 but I can t pc format and I still keep old files and I put t like) so please help me if you have a solution for that I thank you!

  I installed Win7 on P300 s brother without any problem. I don't understand what the problem with your drive in Win7.
  Are you using the original installation disc for Microsoft?

• Impossible to install Win 7 on Satellite C50-A-1JT

  Hello

  You just buy new C50-A-1JT which came with an installation of Linux Mint, I won't, because it's for my mother in law who barely knows windows, and even less to ask him to learn to use Linux.

  I tried to make a bootable USB key with win 7 installation (that I would do on a normal pc).
  The windows installer seems to load fine, but when I press Windows Installer, I get "a required CD/DVD drive device driver is missing. If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

  The problem is that my laptop did not contain driver disks, so I wonder what I can do to install Win 7 on it.

  Thank you
  Mark

  About this error message, see Microsoft Knowledge base article:

  http://support.Microsoft.com/kb/2755139/

  This problem occurs for the following reasons:
  The installation DVD is removed during the installation process.
  A bad quality DVD has been used to create the installation DVD.
  The speed at which the installation DVD is burnt was too fast.
  The DVD drive cannot read media.
  The ISO file is corrupted.

  Given that you don t use the installation disc but a USB flash memory stick, I suppose that the image on the USB flash memory stick file is corrupt or there is a problem with the support of USB flash memory

• Can I install Win 7 on NB105?

  Hi all.

  I have a NB105, with 2 GB of Ram and 160 GB of HARD drive.

  Can I install Windows 7 on this laptop?
  And what kind of version I install?

  The ultimate or home basic or premium.

  Need to answer as soon as possible.

  Thank you very much.

  Hello

  Of course, you might be able to install Win 7 on NB105.

  The min system requirements for Windows 7 is:
  -Processor 1 GHz or faster 32-bit (x 86) or 64-bit (x 64)
  -1 GB of RAM (32-bit) / 2 GB RAM (64-bit)
  -16 GB of disk space available (32-bit) / 20 GB (64-bit)
  -Processor graphics DirectX 9 with WDDM 1.0 or higher driver

  Here you can find more Windows 7 system requirements to use certain features of Windows 7

  http://Windows.Microsoft.com/systemrequirements

  See you soon

• Satellite L300 - 18 d - cannot install Win XP and Win 7

  Hi people,

  I inherited from my brother a Satellite l300 - 18 d...
  He has no BONES. When I try to put an XP installation disc I know work it crashes as soon as it gets to the first windows loading a party Executive.

  I'm trying to use the Win 7 disk, I also know the work and he gets the original file little 30 seconds loading, then it comes up a column just the letter h like that
  H
  H
  H
  H
  H

  ONLY THING I CAN THINK OF IS HARD DRIV IS GOOSED, BUT I DON'T WANT TO REPLACE SO EASILY CORRECTED.

  Hi mate

  I know that you would not be able to install Win XP without previous installation of the SATA driver.
  Another option might be changing the SATA mode in the BIOS
  Go to BIOS and change SATA AHCI compatible mode mode.
  Save the changes, and then try again to install Win XP.

  PS: it s recommended using a Win XP with at least SP2 or SP3 disk

• R850-14 t - FN feature satellite lost after installing Win 7

  Hey,.

  After Installing Win 7 32 bit, I had no functionality of FN.
  I tried to find and also tried some drivers on the homepage, but I don't have the right one.

  If some know what driver I need exactly?

  Thank you!

  Hi mate

  Did you install VAP (value added package)?
  If this is not the case, to do this. After that, restart the laptop and check the functionality of the FN button.

  If the FN button would not work, install utility Support Flash Card which you could find in the box driver for other portable computer laptops; for example L500

  Greetings

• PROTECTED M800-10v: how to install Win XP Pro

  Hello. I'm french, sorry for my bad English

  I protected M800 with vista installed pro.
  I can't install win xp because I have the blue screen.

  Can I install XP?

  Thank you

  Jean-Marc

  Is the BSOD 0x0000007B code?

  You must go into the BIOS and change SATA "Compatibility" or "IDE" mode

  Or, if this option is not available, you should use the F6flpy driver is in the Intel Matrix Storage driver package.

• Install Win 2000 on Tecra S2 - peripheral unknown

  Hello

  I try to install win 2 k on my Tecra S2.
  I have download all the drivers and I have read the order of installation, but now I have an unknown PCI device.

  I try to check all devices such as:
  -Modem
  -Lan card
  -Wireless network card
  -Card bus
  -Audio

  etc etc (including the irda driver, mobile extension, power save the driver driver touchpad...)

  I also try to re install all the driver but I ' have already the unknown PCI, the only factor device that I have not installed is the Bluetooth.

  Please can someone help, please

  The only solution for you to find your way through this download one
  Freeware called "Unknown device identifier" of this site: http://www.zhangduo.com/udi.html

  This program will allow you to easily locate the correct device description as well as the
  pilot coresponding.

  Hope this will sort things

  Concerning

  chain

• Qosmio G30-163. Try to install Win Xp Pro on the new HARD 120 GB drive

  Hi all

  I am trying to install Win Xp Pro on a new 120 GB HARD drive, but windows setup does not recognize the HARD drive.
  I have only to install a (formatted) HARD drive on the laptop as main.
  The secondary place for HARD drive is empty.

  Can you please help me with this?

  Thank you in advance.

  Hello

  Rose is right you need RAID driver.
  Download from the Toshiba download page and load it before installation of WXP starts using the diskette drive/USB stick and F6 option.

  On this forum, you can find many threads with exact explanation how.