purpose of freezing when clicking and then release after moving the mouse

Similar Questions

• Cannot not left/right, click anywhere for 1-3 seconds after moving the mouse to even. The mouse works fine with all other programs.

  Moving the mouse to any results on the ground in time. For example: when I moved the mouse to the "Détails" box, it was entirely 2 seconds before I saw an indication that I could enter data. What reading mail on Yahoo, if I want to mark an item to move, delete etc. I find the mouse cursor on the box for 1-3 seconds before I can click on the box. The problem occurs no matter wherever the cursor of the mouse is used. (Switch from one tab to another, ranging from one matter of Facebook to another, everywhere!) I should point out that I tried to run my Email, Facebook and all regular applications with Internet Explorer and I have not had any problems at all. I uninstalled and reinstalled Firefox. No help! I like Firefox and use it for years, it's only in the last few weeks that this problem has come. I really don't want change in Chrome or IE, but I can't continue with this problem. I'm not a technology expert, so I hope that there is a pretty easy fix.
  Thanks in advance,
  Chuck

  Sorry I should have to take a look at this earlier, but you have several versions of Flash installed. Having multiple versions of the same plug-ins can cause problems.

  Take uninstaller from here:

  • Windows: http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html

  And install the latest version here: https://get.adobe.com/flashplayer/
  Notice that the link is usually an 'optional' offer for the McAfee toolbar in the middle pane you can untick this box as it is not necessary to use a Flash.

• R60 freezes seconds after moving the mouse

  As the title says, my R60 freezes (no response from the mouse or keyboard) moving the mouse (that it either via USB mouse, touchpad or red dot-in-the-keyboard). Can I use the keyboard to navigate through the menus / use the computer normally, but as soon as I try to move the mouse, everything crashes after 2-3 seconds of movement and I have to force a shutdown, reboot and try again... same thing continues to be.

  This behavior started after I turned on my laptop this morning, after having for the night (~ 8 hours). I don't know what the cause could be because it worked perfectly normally until yesterday.

  After many gels and cold - reboot, I decided to press the ThinkVantage button a start and select "return to factory settings" to reinstall Windows. Everything went well, but as soon as I moved the mouse... you guessed it, everything froze as usual. =/

  I have no idea why this happens all of a sudden, as my laptop has been working well for about 2.5 years now. The only problem is that I have to keep plugged in to an electrical outlet whenever it is, because the battery dies, but I don't see how this would cause these repeated blockages.

  What could be the problem? I don't know what else to do because a new installation of Windows XP of course did not help. Fortunately I just build a new desktop PC is how I can even post here. =/

  Thanks in advance for any suggestions!

  -Eric

  Never mind!

  Here is the solution:

  http://Forum.NotebookReview.com/newreply.php?do=postreply&t=332545

  Anyway thanks, boards Lenovo!

• Edit the object and then save back causes the object to move?

  Hello

  I use Acrobat X 10.1.6 update. When you edit PDF documents in a right-click and then by selecting "Change the subject", I get my usual Illustrator pop-up window, change my color or anything else, save, moves back to Acrobat, and the object in question! This has only started happening recently and I have been using Acrobat on a daily basis in my work, as a device, since Acrobat 7 Professional prepress and never had this problem.

  Please tell us what is causing the object to move? I re-installed Acrobat today and being updated and no change. I also have several colleagues on the different versions of Acrobat from 9.5.3 to 10.1.6 who cannot reproduce this problem, even on the same PDF file?

  Thanks in advance.

  Tom.

  I have a feeling it may be a problem of Illustrator. That update?

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• When I complete and sign a form and then print it out, the form data does not print.

  When I complete and sign a form and then print it out, the form data does not print. The form fields are empty with the exception of any signature.

  Thank you. Depending on your answer, I have compiled a procedure:

  Fill & sign a form in Adobe CD and print the form fields:

  (1) open the document.

  (2) click on tools - prepare the form. All fields are displayed in a vertical list in the bottom right of the screen.

  3) click on the first field in the list, scroll to the bottom of the list and shift-click to select all.

  4) click on the first field in the document, make a right click, select Properties.

  (5) on the general tab, uncheck the box locked in the lower left corner. Under field properties common form, select Visible and uncheck the read-only box, close.

  (6) print out and save the file.

  Note: even if you select all the fields in the document in step 3, this procedure may work for the fields on page 1. In this case, repeat steps 3 through 5 for each subsequent page.

• When downloading using firefox I should save the download, and then must go to the download file to start the download. When I download using internet explore I can run a download at the time where as it is downloaded. Can I change a setting somewhere?

  I use Windows 7 with firefox as my default browser. When I download a program using firefox, I wonder if I want to save the file, and then must go to the download folder to start the download. When I download using internet explorer, I gives me the ability to run the download at the time where it is downloaded instead of save the download. Is there a setting I can change to allow me to run downloads when using firefox instead of record?

  Hi shortwedge3,

  You can use the OpenDownload2 extension for the run option when downloading files with Firefox

• I get a runtime error pop up and then shortly after that my computer stops. It only happens when I watch movies, shows or sports on line.__How can only solve this problem.

  I get a runtime error pop up and then shortly after that my computer stops. It only happens when I watch movies, shows or sports online.
  How can I fix this.

  I get a runtime error pop up and then shortly after that my computer stops. It only happens when I watch movies, shows or sports online.
  How can I fix this.

  Hey vickiesguy

  Here is a link to your other thread on this problem

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/658bb987-8680-4fcd-b07d-66ddbbd9cdc2

  Walter, the time zone traveller

• When I try to logoff, the screen starts to Flash as trying to load screen and then finally shuts down the computer.

  Original title: Windows 7 problem

  I will have questions all the time my office. When I try to shut down rather than get the loggin screen the screen starts flashing as trying to load screen and then finally shuts down the computer. I just bought the computer and it runs Windows 7. What could be the problem? Oh I forgot to mention that, after that I start the computer the configuration screen appears saying that windows did not close normally and if I want to start in safe mode.

  Hello

  Here are a few questions to better understand the issue:

  1 made only while off log?

  2. what happens when you restart?

  3 have you tried with different user accounts?

  4 you did changes to the computer before the show?

  Let us try the following and see if they help.

   

  Method 1: Check the event viewer for more details on this subject.

   

  Event Viewer is a tool that displays detailed information about important events on your computer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

   

  Method 2: Run the following fix:

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  Method 3: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

   

  Method 4: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

   

• I can disconnect from one of my two computers, for an hour or a day and log on to a computer "third party" to use photoshop and then log in to the original computer when I'm done?

  Given that I cannot use the product on two computers, I can disconnect from one of these two computers, for an hour or a day and log on to a computer, "third party" to use photoshop and then log in to the original computer when I'm done? I do a work one or two times a week to another place and I use the computer which is there. I already have Photoshop on my home and work computers, but I would like to sign out of one of these just for the day I'm away from my office and home and then sign in again when I'm done. I do that often.

  Hi Ryan,

  Yes, you can do it.

  As long as creative cloud is active only two computers, it will work.

  Once you have finished your work, you can disable the current computer and reconnect to the previous.

• When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."

  I bought a subscription to a cloud creative adobe Photoshop and Lightroom. When I go on the site of adobe and then try to download the software, a message appears saying that safari can't open a page that starts with "Mao."

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

• How can I select more than one bookmark at a time so that I can open and then several bookmarks - without the aggravation of back to the list and selecting and opening each one.

  My dozens of bookmarks, I often want to open 5 or 6 of them at the same time - maybe a couple of weather reports, a couple of radio stations, a couple of other Web sites. But I see no way to do this without laboriously find a bookmark, select it, opening the site, then return to the Favorites, find the second bookmark, select it, open the site and so on. There is probably a way for me to select several independent bookmarks, then open them at the same time. Thanks a lot for your help. Don

  Oh I see, when I read your question, my understanding is that you have Web sites that you are opening regularly you would like to open all at once. This is why I have proposed to create a folder with these specific bookmarks.

  However, your clarification, it seems that you want to open Web sites randomly here and there. So, essentially, you want to SELECT favorite sites and then open them at the same time.

  There is a way to do it. Access your bookmarks by clicking on the menu button drop-down orange Firefox (upper-left). It is:

  • Go to \Firefox\Bookmarks\Show all bookmarks;
  • Click on "Bookmarks Menu" (in the sidebar);
  • Use the CTRL key to select your favorite Web sites.
  • Right click and choose "all open tabs.

  It's always a bit laborious, but it's the easiest way, I could find, especially if you want to open several tabs at the same time.

• How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  How can I get Snipping tools im using Vista and this control panel and then enable or disable the thing pc isn't here. Help?

  Hello

  You don't say which edition of Vista you are using.

  Vista Home Basic Edition does not have the "snipping tool".

  If you have a different edition of Vista, read the information on how to find it:

  http://www.PCWorld.com/article/137099/activate_vistas_snipping_tool.html

  If you have one version of Vista, other than the Home Basic edition, you already have the Snipping Tool screenshot utility: click on Start, all programs, accessories, Snipping Tool. If you do not see here, it cannot be activated. Go to the Control Panel and open programs and features (you may need to click programs first). In the left pane, click Windows turn features on or off. If necessary, click continue when you are prompted by user account control. Scroll down the list of features, check the box next to Tablet PC optional components, and click OK. Marketing of these features gives you not only the Snipping Tool, but also input panel Tablet PC, Windows Journal and other features related to the stylus.

  "Install or activate the cutting tool in Windows Vista"

  http://www.mydigitallife.info/install-or-enable-Snipping-Tool-in-Windows-Vista/

  See you soon.

• Can I rent a movie from iTunes and then see it on the plane?

  Can I rent a movie from iTunes and then see it on the plane?

  In principle Yes. See about renting movies from the iTunes Store - Apple Support. Pay attention to this section:

  To watch your movie when you are disconnected, as on a flight from the airline where there is a Wi - Fi connection:

  • Download the whole movie before going offline.
  • Press play to start watching. The 24 hour timer starts even if you are offline.

  You may want to download rented movies before the day of your trip to make sure you have the time to download all the content.

  TT2

• Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Videos keep stopping and take a long time to restart and then stop after a single word still sometimes

  Hello C Johnston,

  Did experience you these issues when streaming video from any other website?
  It is possible that the servers of YouTube we perform slowly at this time here. This is the problem?
  You might try to optimize Internet Explorer to see if it helps at all:
  http://support.Microsoft.com/kb/936213