Purpose of the auxiliary instance in TSPITR

Similar Questions

• My experience and a further debate on "the previous instance is still active.

  Hi, expert,

  I came across this problem to my application UI last a day and spent some time in this. The reason of the root, I discovered, is that the code does not call a code specific to one of the close method (last screen), so the following will not be cleaned:

  1. my entire user interface application is put into running store

  2 global envent listener for my application Ui

  After debugging, I discovered that this is due to the #1.  However on debugging time, I found that this problem is actually very difficult to debug because reproduce is inconsistent. So, even every time, I don't clean my application user interface of the store of my last screen of UI runtime user close, the will of "the previous instance is still active" appear after a certain (it seems to me that I should also leave my open screen for just a little bit time as well). So although I could not reproduce this problem anymore after the method of the last screen you add code to clean up close, I can't say 100% here that I solved the problem.

  It would be appreciated if someone would confirm the reproduction behavior of his that I've seen here.

  In this position, he also spoke against putting the entire application in the TERM store:

  http://supportforums.BlackBerry.com/T5/Java-development/UiApplication-put-into-RuntimeStore-vs-make-...

  I think that I should remove the code to put together Ui App store time anyway.

  I also searched the forum, I think the following 2 positions are most useful:

  http://supportforums.BlackBerry.com/T5/Java-development/previous-instance-still-active-issue/TD-p/37...

  http://supportforums.BlackBerry.com/T5/Java-development/help-with-quot-previous-instance-still-Activ...

  In the post, he said that he should be careful with the external auditor. For my purposes of background, I used the earpiece of the phone and found out that he would be called to the phone application. However, other headphones I've used as follows, I haven't not because they are called to external applications (must be in the thread principal current substantive application event)

  SystemListener2

  CoverageStatusListener, RadioStatusListener, WLANConnectionListener

  CodeModuleListener

  ApplicationMessageFolderListener

  Should I bother with the earphone as well?

  I suggest to cancel the registration of all and each listener when your application stops.

• RMAN-05520: name of database incompatibilities, auxiliary instance a SANDBOX, command specified SANDBOX

  Hello

  I get error rman-05520 while trying to replicate the database by using the active database method.  You want to clone the dev to sandbox without catalog database using the current database.  Target and auxiliary databases are connected, kept auxiliary in nomount pfile, then use command below, but get error below.  Can anyone help on this.

  Thank you

  RMAN > current database of target for sandbox database duplicate nofilenamecheck.

  From 30 November 15 Db double

  using the control file of the target instead of recovery catalog database

  allocated channel: ORA_AUX_DISK_1

  channel ORA_AUX_DISK_1: SID = device type 1510 = DISK

  allocated channel: ORA_AUX_DISK_2

  channel ORA_AUX_DISK_2: SID = device type 1887 = DISK

  allocated channel: ORA_AUX_DISK_3

  channel ORA_AUX_DISK_3: SID = device type 2264 = DISK

  allocated channel: ORA_AUX_DISK_4

  channel ORA_AUX_DISK_4: SID = 2641 type device = DISK

  allocated channel: ORA_AUX_DISK_5

  channel ORA_AUX_DISK_5: SID = 3018 type device = DISK

  allocated channel: ORA_AUX_DISK_6

  channel ORA_AUX_DISK_6: SID = device type 3395 = DISK

  allocated channel: ORA_AUX_DISK_7

  channel ORA_AUX_DISK_7: SID = device type 3772 = DISK

  allocated channel: ORA_AUX_DISK_8

  channel ORA_AUX_DISK_8: SID = device type 4149 = DISK

  allocated channel: ORA_AUX_DISK_9

  channel ORA_AUX_DISK_9: SID = device type 4526 = DISK

  allocated channel: ORA_AUX_DISK_10

  channel ORA_AUX_DISK_10: SID = device type 4903 = DISK

  allocated channel: ORA_AUX_DISK_11

  channel ORA_AUX_DISK_11: SID = 5280 type device = DISK

  allocated channel: ORA_AUX_DISK_12

  channel ORA_AUX_DISK_12: SID = device type 5656 = DISK

  allocated channel: ORA_AUX_DISK_13

  channel ORA_AUX_DISK_13: SID = 3 type of device = DISK

  allocated channel: ORA_AUX_DISK_14

  channel ORA_AUX_DISK_14: SID = 379 type device = DISK

  allocated channel: ORA_AUX_DISK_15

  channel ORA_AUX_DISK_15: SID = 757 type device = DISK

  allocated channel: ORA_AUX_DISK_16

  channel ORA_AUX_DISK_16: SID = 1134 type device = DISK

  content of Script memory:

  {

  clone of SQL "create spfile from memory";

  }

  execution of Script memory

  SQL statement: create spfile memory

  content of Script memory:

  {

  clone to stop immediately;

  startup nomount clone;

  }

  execution of Script memory

  Instance Oracle to close

  connected to the auxiliary database (not started)

  Oracle instance started

  Total System Global Area 36344233984 bytes

  Bytes of size 2227112 fixed

  16911434840 variable size bytes

  19327352832 of database buffers bytes

  Redo buffers 103219200 bytes

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command duplicate Db at 30/11/2015-14:57:21

  RMAN-05501: abandonment of duplicate target database

  RMAN-05520: name of database incompatibilities, auxiliary instance a SANDBOX, command specified SANDBOX

  Make sure remote_login_passwordfile = 'EXCLUSIVE '.

  and pfile orapwd is sycn with primary

• OCR and voting disks (vd) are in ASM, I can stop the ASM instance?

  Hello
  
  I have two RAC nodes in the program of production installation and test setup. OCR and voting disks (vd) are in ASM, I can stop the ASM instance?
  
  -Kumar

  Hi Kumar,

  No, we can't.

  Best practice is that you need to stop the battery Oracle Clusterware on the node on which you must stop the Oracle ASM instance.

  Use "crsctl stop cluster node_name - n" or "crsctl stop crs" for this purpose.

  It could be that useful...

  Thank you
  LaserSoft

• Get the syntax error when you try to reproduce in the auxiliary database

  I get the following error message when you try to duplicate an instance:
  
  D:\ > rman target sys/xxx@hr3 rmancat/xxx@rman AUXILIARY catalogue.
  
  Recovery Manager: release 9.2.0.7.0 - Production
  
  Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
  
  connected to target database: HR3 (DBID = 3470722132)
  connected to the recovery catalog database
  connected to the auxiliary database: CLONE (unassembled)
  
  RMAN > DATABASE of TARGET in DOUBLES at THE CLONE until TIME ' TO_DATE (February 24, 2011 0:00:06).
  (0 ',' JJ-MM-AAAA HH24:MI:SS') ".
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01005: syntax error: found 'clone': expected an a: 'double-quoted-string '.
  identifier, single-quoted-string ".
  RMAN-01007: 30 line 1 column file: entry standard
  
  Is it because I named the cloned database "CLONE", and that is a reserved word for Oracle, or is this something else that I missed?
  
  Thanks for any response...
  / Ronny

  Hello

  Is it because I named the cloned database "CLONE", and that is a reserved word for Oracle, or is this something else that I missed?

  Fix this error related to the keyword.
  You can run into a new problem in function if your configuration is incorrect.
  (backup items available on the clone host, file systems, settings etc..)
  Rgds,
  Tycho

• Change the color of the button instance with actionscript?

  Someone knows how to change the color of an instance of button with actionscript? If I'm in a default variable I want to change this to a different color key.
  
  
  

  setRGB() still works for the purpose of the color of the buttons and it is easy to use:

• Multiple sites using the same instance of CF?

  Hi Gang-
  I have a client who has recently improved CF Pro to Enterprise and they use in a relatively simple way as an intranet. They would like to help me configure a second instance for the purpose of a staging server, but I noticed after they revealed they do not have the link of Enterprise Manager in their CF Admin screen.
  
  They need to reinstall CF using the MultiServer installation version to be able to deploy a second instance of CF? Need to uninstall and reinstall? Ugh...
  
  Can't they just create a second site under their web server, using a different port and you worry about the second instance of CF? Best practices for a moment, remember, they do not necessarily expand on this server, it is intended to be a staging server.
  
  Any ideas on the best and fastest way to handle this?
  
  Many thanks in advance,
  Rich

  Many questions, many answers. :-)

  Yes, rich, they would need to install the version multiserver for you to see this Enterprise Manager option in the CF Admin. But no, they would not need to uninstall the server deployment (what you did) to add to the MultiServer deployment. They can coexist (although it is not something most would do in general).

  The best news for you is that, Yes, they can indeed just set up a second site on their web server, and who also point to the deployment server CF one you have installed. It is, of course, assuming that they are running a web server that supports multiple sites. If it's Apache, you're good. If this is Windows, then as long as the Windows Server 2003 (or 2008 or Vista), you're good, too. (Just to be complete, for other readers, XP does not allow you run multiple sites at the same time.)

  If during the installation of the CF tells you that there all sites on the web server with CF, you need do nothing again create site. It should be immediately able to run pages CF. If you said that it is in CF link to a site, then you will need run the server web Configurator again. You can do it manually, even after installation. See the CF Admin and Config docs to learn more about it, as well as on this issue. (I know many like to just run things and hope that the interface is pretty clear, but as this issue shows, for some things anyone installing CF will be well served by looking at this collection of Miss often.)

  Hope that helps, Rich. It is not a RTFM response. :-) Suffice it to say that if you need more that what I said, it's in the manual. Yet, I am happy to answer follow up if I can.

• How to use multiple profiles within the same instance of Thunderbird

  A month ago, I got Thunderbird set up with three profiles,
  and all three could be used in a start only one of
  Thunderbird. That the PC is now gone. I've reconfigured the three
  profiles on a new PC, but can't do all three
  can be used in the same instance of Thunderbird. Can you help me?
  Both computers are / were only Windows7 64 bit.

  Thunderbird opens on the default if a profile
  or
  The Profile Manager is responsible to ask at startup it will allow you to choose which profile to open if it opens the last used profile...

  Thus, it shows a profile at a time within a single instance of Thunderbird.

  However, only one profile can have multiple e-mail accounts.
  for example: I run 4 e-mail accounts in a profile.

• What is the purpose of the files the (Inbox, trash, etc.) who are also in the default account?

  What is the purpose of the files the duplicate (Inbox, trash, etc.) who are also in the default account?

  Check here

  • http://KB.mozillazine.org/Local_Folders

• What is the purpose of the "this is awkward window?

  What is the purpose of the "embarrassing window" at startup. Why can not simply open the page in the homepage as in the past? Thank you.

  If you have submitted reports of incidents, so thanks for posting the ID of one or more reports of recent incidents that have a prefix 'bp ':

  • BP-xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

  You can find the ID of the submitted crash reports on the Subject: hangs page.

  • You can open the Subject: hangs page through the address bar, you open a Web site, or open this page through the "help > troubleshooting information.

  See:

  • http://KB.mozillazine.org/Mozilla_Crash_Reporter
  • https://support.Mozilla.org/KB/Mozilla+Crash+Reporter

• Windows says FireFox must be updated but cannot be because the two instances are running, which is not true. It happens everytime I open FireFox

  Windows says FireFox must be updated but cannot be because the two instances are running, which is not true. It happens everytime I open FireFox

  This has happened

  Each time Firefox opened

  == June 28 2010

  Firefox 3.6.6 came out on 26/06/2010 to solve problems that some were plagued with the new crash protection feature introduced in Firefox 3.6.4. NOTE: Version 3.6.5 has been used for another product, so there is a "jump" in the version numbers.

  You need to update to the latest version, Firefox 3.6.6.

• What is the auxiliary pins use in 6602 counter card

  I want to know the use of pins 6602 counter\timer auxiliary card.

  Hi Julie,.

  The auxiliary line of 6602 meters can be used for many different tasks, such as mentioned in the 660 x user manual (page 38 of the .pdf).  If you use our driver, the most common way to use the line to THE is like a line up/down for a leader board.  What do you need specifically to do with the 6602?

  Best regards

  John

• Purpose of the "Signal Reset" bulk "Simulate Signal"

  Hello

  What purpose of the "Signal Reset" in the block "Simulate Signal".

  I searched, which once activated, it affects the default value, which is 0 in the output of the block "simulate Signal".

  But it seems that the functionality of the 'reset' Signal is different.

  On figure 1 - Schematic of my installation with pushbutton "Reset Generator" below on the left.

  On Fig. 2 and Fig. 3 - the output of the 'Simulate Signal' block and some derivatives of signal with 'Reset Generator" OFF and WE accordingly.

  As you indicate, in the case WE , the output is not 0.

  Thanks in advance for the clarification

  Pavel

  Fig. 1

  

  Fig. 2

  

  Fig. 3

  

  The reset is used to "reset" the phase of the signal to its default value when the value 'True '.  If you leave the value of "reset" to "false" and you run the Simulator signal in a loop, you will get a contineous waveform, even when your signal Simulator does not generate a whole number of cycle (combination of signal frequency, sampling frequency and number of samples).  If you set the "reset" to "true" the waveform will be interrupted (the stage will be set to its default value in each iteration).

  Here is an example:

  

  "RESET" = FALSE, see chart below:

  

  'RESET' = TRUE, see the chart below:

  

• What are the changes that the installation of BizTalk has on the SQL instance?

  Original title: BizTalk.

  Hello.

  I want to install BizTalk.
  BizTalk and SQL are different servers.
  I would like to know what are the changes that the installation of BizTalk on the SQL instance.
  Can anyone help?
  Thkz

  Hello

  I know it's late to answer this question, just in case someone else look through this issue.

  BizTalk installation does nothing to SQL Server, but make BizTalk Configuration. When configure us BizTalk on any SQL Server (same or different), it creates the required databases and SQL Server works on this server.

  Here is a series of articles on installing and configuring BizTalk Server: http://sandroaspbiztalkblog.wordpress.com/2013/05/16/biztalk-2013-installation-and-configuration-install-and-configure-biztalk-server-2013-part-9/

  Thank you!

• What is the purpose of the function Array Index in the example attached?

  Hello

  I'm fighting with the Array Index function. I found the attached VI on the OR site which was exactly what I wanted to do, but rather than simply accept that it works and use it, I wanted to understand.

  What is the purpose of the function Index of table inside the while loop? If I put a probe on part and on the other, the values are the same, but if I remove the service and connect directly to the > function, I get an error.

  I do not understand the tables but I don't understand what is happening here. Any help would be appreciated gratefully.

  Thanks in advance.

  

  It is just picking the first reading of the table in the waveform.  If it's good enough (I'd take at least the average of N samples), why not cela?