Put the food in a HP G5283sc desktop PC

Hi, I have a HP G5283sc desktop PC. The power supply is only 300W, and I need to uppgrade to install a better graphics card. I understand that there is something fairly simple to install a new PSU, but is - it possible that I need to upgrade other components as well? I was looking for a 600-700W power supply. I'll be more grateful for the helpful answers!

According to the power requirements of the video card you are considering, the Corsair CX500, CX600, CX500M, or CX600M should meet your needs. These power supplies are highly recommended and are known to adapt to most HP consumer PCs. You will need to should not improve anything else in the computer. Please avoid the latest and best PCIe x 16 v3.0 graphics cards, as seems to be incompatible with many computers that are a few years old.

If you have any other questions, feel free to ask.

Please click the White Star of KUDOS to show your appreciation

Tags: HP Desktops

Similar Questions

  • How can I put the butterfly of Windows on my desktop icon to launch the innernet connection?

    I have the Vista operating system reinstalled on my computer and I lost the butterfly icon who took me to the page that took me to the homepage MSN internet connection, and I don't know how to get it back.

    You have reinstalled IE9? It should be in the bookmarks bar. If Favorites does not display the icons, do a right-click on the toolbar on the shortcut menu that appears, click on "Favorites" to put a checkmark in front of it.

  • XPS 8300: Can I put the food?

    I would like to upgrade my power supply for my XPS 8300 to something with 500W or later. Exceeding of several internet forums, it seems that some people were able to do, but they need to change in order to adapt because the exclusive Dell power is shaped differently.

    I opened a discussion with Dell and said then that the "maximum power to the system would be 460w", which means that I have no option to upgrade.

    Can anyone else confirm this? It seems fairly ridiculous that Dell would bother someone to upgrade their system this way.

    BadgerKing

    Yes, generic ATX power supply can be installed, with a power of 20 + 4 pin main motherboard, or 24 pins as the XPS 8300 has a panel back open, with or without the on/off switch.

    You should be able to buy a compatible power supply either a local computer or online store.

    Note: A power supply with four SATA power connectors, is necessary.

    It was reported that it is better to buy a PSU with a depth of approximately 5.9 ".

    Bev.

  • I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?

    I had to put new hard shore Studio dell with vista. How can I put the toolbar back across the top of the desktop? I thought it was called a Ribbon?

    A question = a post in these Forums.

    http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/465e87c6-5289-4027-B414-7251bdfecc0e

    Answered in another Thread.

    Mick Murphy - Microsoft partner

  • How can I put the XP Azul Office on my new Windows 7 Desktop?

    How can I put the XP Azul Office on my new Windows 7 Desktop?

    How can I put the XP Azul Office on my new Windows 7 Desktop?

    Hello

    If you mean that the Azul desktop wallpaper, yes you can.

    Just add this image to C:\Windows\Web\Wallpaper folder.

    I hope this helps.

    Thank you for using Windows 7

    Ronnie Vernon MVP

  • How can I put the IE icon on my desktop

    How can I put the IE icon on my desktop?

    Hello

    Create a shortcut to

    %ProgramFiles% (x 86) %\Internet Explorer\iexplore.exe

    or

    %ProgramFiles%\Internet Explorer\iexplore.exe

    -or-

    Click on start, click on and hold the Internet Explorer icon with the right mouse button, drag it to the desktop, release the button and click Create shortcuts here.

    -or-

    MSKB: The Internet Explorer icon is missing from your desktop

    http://support.Microsoft.com/kb/945402

  • I dreamily put frozen food right next to my laptop, so condensation it could damage?

    I put frozen food right next to my MacBook Pro so that food was touching the front edge of the laptop it (it was wrapped in plastic wrap and a cardboard container), so condensation it can cause damage inside, or are there no place to worry?

    If no liquid got on the computer, then it is fine.

  • I refreshed Firefox, now all my Add-ons disappeared and worst parameters associated with them are gone too. Where I could find to put the 'old'?

    At the suggestion of Firefox, I refreshed, now all my Add-ons disappeared and worst parameters associated with them are gone too. Where I could find to put the 'old'?

    When updating Firefox, it creates a folder on the desktop called "old Firefox data." According to Firefox, it's when my old settings were saved. The question to the community, it is where I can move some of these old settings (and what are those FireFPT) to restore my old settings. Time Machine using nothing else that place an old version of FireFox in my app folder.

    I have several clients and staff that need to be restored as soon as POSSIBLE.

    Thanks for any help you can offer.

    Scott

    The best recommendation I can do for your plugins is to visit:

    https://www.Mozilla.org/en-us/pluginCheck/

  • How can I put an icon (shortcut) back on my desktop?

    I had the icon for my printer (RGC 2400EN.exe) driver on my desk and now it is missing and I want to put the icon (shortcut) on my desktop... I use it (by double clicking) to reinstall my printer driver, when my printer refuses to print.  How can I put the rear driver icon?

    RGC 2400EN.exe

    Are you sure that's the correct name?
    If so, start button > Search box, type RGC 2400EN.exe > RGC 2400EN.exe should appear in upper-left, done right click it > click on Open File Loaction > it will lead you to the RGC real 2400EN.exe > righ click Home > Send to > desktop (create shortcut)

    PS Ce is not the right forum for the question of the computer. It is a forum for Feedback.

    If what I suggested above does not work, move your question to the Performance and maintenance forum.

    One last thing. ALWAYS specify your operating system before you begin to describe the problem.

  • Age of Mythology of installation met a disk error when writing in the file C:\Users\(my name)\Desktop\aom\textures\textures.bar

    Age of Mythology of installation met a disk error when writing in the file C:\Users\(my name)\Desktop\aom\textures\textures.bar. Make sure that your hard disk is not full, and that the file is not in use

    Original title: AOM moved only to 94%

    When I install Age of mythology, I have put on disc 1, do all the stuff, he moved to 45%, and then it asks me to put in disc 2. I do, and he moved to 94%, which is the stage that she calls 'Copy texture.bar' then it stops and I can hear the disc turn and stop repeatedly. After about 10-15 minutes, I get an error message and it said:

    "Age of Mythology of installation encountered a disk error when writing in the file.

    C:\Users\(My Name)\Desktop\aom\textures\textures.bar.

    Make sure that your hard disk is not full, and that the file is not in use. »

    I know that my hard disk is not full, because I just got this computer a month ago. In addition, when the disc is, it vibrates and makes a buzzing sound that only stopped when I put my finger on the space between the disc and the side of the laptop.

    Could you please help me?

    See if it's in the download of the demo. http://AOM.HeavenGames.com/

  • Windows wants to install 6 updates every time that I log out or put the computer in mode "Eve"

    I can't stop or have food options on.  I expect the updates to install.  It is said that they have installed and the next time I start there they are.

    Hi Happygrammy,

    Welcome to the Windows Vista answers Forum!

    This could happen if the update that you are trying to install are damaged during the process. To prevent this all the time you need to maybe uninstall the updates, and install them one at a time.

    To do this, you will need to make a list updates that are the cause of the problem, then go to install update history and uninstall them manually. Then download these updates and install them in clean boot mode.

    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    Steps to put the system in clean boot include:

    1 log on to the computer using an account with administrator rights

    2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue

    3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

    4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

    Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

    For more information about the clean boot, follow the below given link:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    1. click on start, type msconfig.exe in the start search box and press ENTER.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. on the general tab, click the Normal startup option, and then click OK.

    3. When you are prompted to restart the computer, click on restart

    You will need to maybe reset the Windows Update components, download the Microsoft fix - it from the link and run the wizard that automatically resets the windows update components, if it does not, I recommend that reset you manually update windows components from the link: http://support.microsoft.com/kb/971058

    These steps should solve the problem, give it a try and check if you are able to perform windows updates.

    Hope this information is useful.

    Amrita M

    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • DV6 quick launch button mute does not work properly. He puts the speakers muted, but does not change color.

    Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color.  It's still orange, not mater if your speakers are on or off.   His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.

    I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there.  The problem is about 2 weeks old.   Have not added any new software that I know.  But computer installs updates as received.

    Simon

    Hello

    First download the audio driver by using the links below and save the installer to your desktop.

    Audio driver - Windows 7

    Audio driver - Windows Vista

    Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version.  Once the installation is complete, restart the laptop.

    Kind regards

    DP - K

  • When I put the PC in each Stand By, or Hibernate the PC often comes back to life his own, without my mouse movement

    original title: problems with Stand By and Hibernate

    I have a desktop Compaq 6140EA with BIOS current under XP SP3 (updated) and all driver updates applied.  When I put the PC in each Stand By or Hibernate the PC often comes back to life on its own, without my mouse movement / hit a key (Stand By) or touch the power button (Hibernate).  I have reset the BIOS to default settings. no improvement.  I've selected all the power management always we and tried the ACPI fixed feature off installation and power button / stop.  No improvement.    The problem seems to occur less if I turned off my modem broadband Ethernet connected before entering Stand By / Hibernate.

    I wonder if I got bad wake-on-LAN and if so, how to disable it?

    Thanks, but I already did those things.  But I seem to have found the answer: I pointed out that the problem seems to be related to the modem broadband.  I found KB/810719 related to this issue.  I followed the instructions: in Device Manager / network adapters / properties / power management check only allow management Stations to bring the computer from sleep mode.  That fixed it.

  • How to activate the Sleep function to put the computer to sleep if a program is open?

    I have Windows Vista basic on a desktop Dell 530.  I found that if I have a program or application running (such as I-tunes or windows media player) then the Sleep function will not put the computer to sleep.  How to activate the Sleep function to replace these programs and put the computer to sleep?

    Note: This is how it was with windows XP, the Sleep function would put the computer to sleep no matter what was running, he was reliable, if you left the computer and I forgot that you had something running.

    Thanks for your help.

    Hi kevino4130,

    If you disable sharing on your computer (not only the power settings) of media, it should allow him to enter the mode 'sleep'.

    See if that does not solve your problem and let us know.

    Dave D

    Dave D
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • You put the toolbar of office back at the top of the screen?

    How can I put the toolbar 'Office' back at the top of the desktop computer, you know the tool bar with music, internet and so on? Help, please

    On Friday, April 23, 2010 22:05:43 + 0000, keith50 wrote:
     
    > How can I put the toolbar 'Office' back at the top of the desktop computer, you know the tool bar with music, internet and so on? Help, please
     
     
    If I understand what you are asking the subject, is not a
    Feature of Windows 7, but the Dell Dock, something provided by Dell.
     
    Dell how to put in place.
    Ken Blake, Microsoft MVP (Windows desktop experience) since 2003
     

    Ken Blake

Maybe you are looking for

  • Photos 2.0 crashes after ordering a photo book

    By ordering a photobook (100 pages), Photos crashes after a few minutes and the current percentages (40-60%). Repair of that photo library does not help. The library has 250 GB of data... Here is the log file: Process: Photos [1060] Path: /Applicatio

  • Update Installation Error Code 66 has

    I am installing a major update but its showing an error 66 a. Code I tried to install several times but without success, can anyone tell what I can do. I tried the pages but once again unsuccessfully in case of problems.

  • Canon LASER CLASS 510 all-in-One Printer

    Is there a driver Windows 7 for my old Canon Laser Class 510 printer all-in-one? I have a new computer with Windows 7 and cannot get my Canon 510 to work.Thank you.

  • Output of the projector Dell Inspiron

    Hi all, have a new Dell Inspiron, but big problems trying to connect to my LCD tv using a VGA cable.laptop locks, or black screen, while saw no output on tv. After a few experiences, with assistance from Dell, the problem was solved by using a differ

  • helps the system restore

    Hello I have my IBM T - 42 2373-DC2 for awhile now. A year ago, I installed linux Ubuntu. I never noticed until now, I can't launch the rescue and recovery to factory settings: 1. Select the recovery in the Grub to the boot partition, which has alrea