Puts an end to Apple's iWork and iLife?

Similar Questions

• iWork and iLife is not free, whether it was before

  Recently, I downloaded pages free. It was a week ago, and then other applications like garageband, iMovie, Keynote apple and etc.

  were too free. Now it says they cost € 9.99 each. I am always signed the same Apple ID you could help me with this problem?

  Thank you!

  Hello

  If you them before to download for free, even though it now has a price, when you try to download and set your password, it will say: this update is free because you have an earlier version of this article. To get this update now, click OK. "So, basically, it's free.

  Hope this helps,

  Aaron

  

• I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  I got a Apple Watch yesterday and since put in place and paired him and everything, but now I can not unlock it or look at anything on the watch because it won't let me.  Any ideas as to what is wrong or what I am doing wrong?

  Hello

  If you have not already done so, it could be that you want to configure your watch with these settings:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > General > detection of wrist - it lights up.

  -On your iPhone, in the application of Eve, go to: Watch My > password > code turn on (choose a password Simple or more complex).

  -Also on the password settings screen, select Unlock with iPhone.

  After putting on your wrist, your watch don't unlock then after whatever you do first: unlock your watch manually (by entering the access code) or unlock your iPhone.

  Then, it will remain unlocked (including when the screen is idle) until you remove it from your wrist. When you remove your watch, it locks automatically.

  More information:

  https://help.Apple.com/watch/#/apd748b87e2a

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• I put my date of 01/01/1970 and my iPod 6th Gen has not worked since. I tried to put it in DFU mode and it has reset, but remains on the apple logo.

  I put my date of January 1, 1970 and as soon as I rebooted my iPod (6th generation) he never returned to my home screen, but instead, he stayed on the apple logo. I tried to drain the battery, but he always did. I even connected it to my computer and put it in DFU mode to reset, but it froze at a very small percentage of loading and no progress has been made.

  Given that the DFU mode does not work, then

  If you have this problem,contact Apple technical support.

  If you have changed the date of May 1970 or earlier and cannot restart your iPhone, iPad or iPod touch - Apple Support

• Outlook Express error: 'your server suddenly put an end to the connection. Error: 10053 and error number: 0x800CCC0F. »

  original title: problems outlook express

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Object ", account: 'pop.windstream.net', server: 'smtp.windstream.net', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 10053, error number: 0x800CCC0F

  Your server suddenly put an end to the connection. The possible causes for this include server problems, network problems, or a long period of inactivity. Account: "pop.windstream.net', server: 'pop.windstream.net', Protocol: POP3, server response: '+ OK 3787 bytes', Port: 110, secure (SSL): no, error number: 0x800CCC0F

  There was a problem connecting to your e-mail server. Your password was rejected. Account: "pop.windstream.net" (1), server: 'pop.windstream.net', Protocol: POP3, server response: '-ERR user name or password.', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC92

  Connect with your e-mail server. They know what is your password.

• The new iWorks and macOS doesn't just :(

  The new iWorks and macOS does not work correctly. For example in the Pages I can no longer work. Its grip MUCH. Its almost unsusable. Please fix this quickly. I use a lot of Pages. This is a new problems that the macOS upgrade NAS and the last iWoks apps.

  You talk to Apple here, just other users.

  Menu > Pages > feedback: provide Pages

  And give much more detail that you have here, so Apple will know exactly which versions, where to look and when and under what circumstances the problems occur.

  Peter

• Cannot put an end to calls on Skype for WP 8.1

  Hi all

  I can't put an end to calls to fixed/mobile phones on Skype for WP 8.1.

  I have the touch screen and it just goes black (as it is in standby mode) while my finger is on it. Screen appears again when I remove my finger. Appeal does not end. The only way is the other person to end the call or me to turn off my phone.

  All solutions? Looks like a pretty major bug.

  Thank you

  Hey,.

  and thank you for your additional info/effort.

  After some research, we have learned that it is a problem experienced with the Lumia 630/635 and she's been fixed to WP8.1 update 1. Wp8.1 update 1 deployment was launched and it will come to the Lumia 630/635 so.

  You can check if it is available by going to settings-> check updates to phone for updates.

  BR

  Jake Kunnari

• Some performances are not completed to help put an end to everything in the model of parallel processes

  Hello

  This question confued me recently, I would use a parallel process of model and to finish running at the same time.

  If there are action steps in order, it seemed that will put an end to the execution of all.

  However, I put a wait instead of steps of the action function, there are a few executions not interrupted while I pressed the button finish everything in the toolbar.

  Hope someone can give me help. Thank you very much.

  PS. the number of testsockets has the value 9 in my teststand.

  I ran your sequence again, and I have reproduced the issue.

  It seems the action of the polls Test for success/failure of the VI at full speed.

  It will consume your CPU resource to 100%.

  So I add some delay in the VI to prevent election full speed.

  Please see the following block diagram.

  

  I tried and it seems resolved the problem.

  Ting

• Press any key to put an end to an exe BACKS run in system.exe VI

  Hi I am running some old programs exe based BACK.  Two programs that run one after the other, loop and redo (variables are modified for each loop) the first exe program requires the user to "press any key" to put an end (close window CMD.  When I start my VI using the sub - VI system.exe to run DOS programs I have to "Press any key" to close the window and leave my VI to continue a loop.  Or if I use the option 'Until the end', I find myself with a bunch of Windows CMD to close at the end.  There must be a simple way to "simulate a key shot" Plan B is to train a monkey to sit in front of the key board...

  I using Labview 2013 under windows XP / 7

  Thank you

  Check out this post.  If this does not work for you, you can try to use SendKey in a Powershell script.  Good luck.

  Full disclosure, I did none of these, can't vouch for their usefulness.

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Cannot put an end to the programs

  Whenever a program crashes on my computer, and I try to put an end to this program, I can't do it.  It's as if the pane "end of program" also blocks.  So, I have to turn off the machine.  Anyone know what I can do?

  Instead of finding ways to put an end to the program when your computer crashes, I recommend you to understand why your computer is locking up and fix it in place.

  If turn you your machine (I guess than the power button), you will soon have a new post that looks like this:

  My system does not boot and I see a message like this:
  Windows XP could not start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM

  Then someone will offer to you try to repair your system with KB307545 and which will not help you either.

  XP has a built-in mechanism that is designed only to help diagnose the locking systems, freeze or crash, and it is very useful.

  I suggest to use (that's what it is) after general troubleshooting basic steps are exhausted.

  You know - easy as questions... What is the program that is locked?

  I would also say everyone with blocking XP problems starting their own new topic so they can be worked separately, or this thread is going to be annoying quickly.

  Thankfully, I'm not a moderator (Fortunately, I don't have no control on the operation of this forum).

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  What you see you don't think you need to see?

  What do not you think that you should see?

  Fill in the blank: my system worked well until: _.

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

  Perform scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  They can be uninstalled later if you wish.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Error code: 0x800CCC0F, your server suddenly put an end to the connection when sending emails with attachments

  Original title: send Inbox problems

  If I attach a pdf file to my outgoing mail, it lies in the Outbox and will not send then I get an error message, send e-mails with no attactments is no problem

  If you have your anti-virus value analyze them, disable the e-mail scanning.
  It is redundant and doesn't interfere with the transmission, especially with Windows
  Mail.
   
  --
  Dave N.
  MS - MVP (Mail)
  Windows 7 Ultimate 64
  Get it: http://download.live.com/wlmail
  Get Help: http://www.windowslivehelp.com/product.aspx?productid=15
  "wynnieboy" wrote in message
  News: * e-mail address is removed from the privacy... *
   
  After my rarlier question if I add an attachment to an e-mail, it will be
  do not send and this is the error message
   
  Your server suddenly put an end to the connection. Possible for causes
  It include server problems, network problems, or a long period of
  inactivity. 'A last try', account: 'imap.aol.com', server:
  'smtp.aol.com', Protocol: SMTP, Port: 465, secure (SSL): Yes, Socket error:
  10053, error number: 0x800CCC0F
   
   

  Windows 7 Ultimate 64

• Disable "Do you want to put an end to this process?" pop up

  What is a necessity to do to eliminate that pop-up of the elimination of the unnecessary process (do you want to put an end to this process?) that anyone gets any time we use the Task Manager to remove a process? Do it!!

  I was unable to find a way to remove the warning message - I think that it is incorporated into the code.  I searched the registry and found no entry to complete the process and nothing meaningful for same Task Manager - so it must be controlled by a system file which, if we could find the same, cannot be changed by all the means available to us (which means that you or me or probably anyone outside the development of Microsoft).  I suspect that they put there to make sure that a process or service, or that is not finished by accident (which could cause the system to crash).  In fact, despite the annoyances (like you, I too would turn off if it were possible, because I am convinced that what I'm doing), I agree here because the consequences of a mistake can be severe, and too many people are not careful enough when you press the buttons.

  Then I tried to use another program, Process Explorer, http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx which is an improved version of the Task Manager. However, when I went to kill a process, I had again a confirmation warning message - if this isn't a way to bypass the confirmation message.

  Sorry if this isn't what you wanted to hear, but this confirmation message cannot be disabled.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The application is not responding. The program can meet again if you wait. You want to put an end to this process

  Whenever logged on windows 7, I get the following message:

  "The application is not responding.  The program can meet again if you wait.
  Do you want to put an end to this process"with the choice of the end of the process and cancel.
  When I type complete the process the screen shows my wallpaper and not icons or the bar of windows at all. When I hit Cancel, the message of disappears for around one minute and shows up again.
  I can't use my phone at all in this way, so I hope you can help me.
  Sven

  Reboot the PC by using the F8 key at startup, this time select command prompt, and then follow the instructions for restoring the system;

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Select a restore point to a period where it was all is OK