"PWBKBACK MFC Application has encountered a problem and needs to close."

Similar Questions

• the application has encountered a problem and needs to close

  I build the LV, a request using the tabs, the FPGA dll and DLLs that communicate with devices CAN, GPIB, and PCI.

  The apears program to work properly, but sometimes and I can't see the patern, it crashes with the error "the application has encountered a problem and needs to close...". »

  Sometimes the error apears when I'm trying to exit the program, other times it hangs before that.

  I can't find the error because the program can work well for several hours and then crash or it hangs after 5 minutes of work with it.

  Clues about what goes wrong?

  Kind regards

  Daniel Coelho

  I'm still going through the example, but since the error ocours sporadicaly this could take some time to identify the error.

  I was browsing the code and I was wondering about simple things, like:

  -J' have many local variables, could it be the cause protected by some kind of error?

  -Since I use dll on my code, is there a way to make sure that all DLLs are loaded and unloaded properly?

  My program has a TAB with a simple UI of TestStand and when I change the tabs I close the user interface for teststand. When I use this UI I have load and unload DLLs of same that I use on other tabs, i. e., when you use the UI I load all DLLs that communicate with devices and when I change the tabs I unload all DLLs because on each separate TAB I can control these indicidually devices.

  It's a little hard to explain, but I think I managed

  Is there a grain of truth on my questions? If so, what could I do?

• Audio Board error, "IDT audio system tray application has encountered a problem and needs to close" at startup

  On startup, I get "IDT audio system tray application has encountered a problem and needs to close." How can I fix it?

  By replacing the file mixer...

  Right click on my computer > in the drop-down list on the left click on explore > in the menu bar, click Tools > File Options > see tab (or display) > 'Show Hidden files... ". "is ticked > stand c:\windows\system32\dllcache and right-click on the sndvol32.exe file and copy > paste here c:\windows\system32 and replace the existing file if requested > re - start.

  The error should disappear.

  If, for some reason, it does not disappear and you have no sound, download, then reinstall your audio drivers on the PC/Laptop manufacturers website.

  See you soon,.

  Jerry

• Assistant charger blackBerry Smartphones Pocket Application has encountered a problem and needs to close. We are sorry for the inconvenience.

  I get this message when I connect my new Bold 9900 and started doing on my curve 8330 a few months ago. I have the latest version of the 6.0 Desktop Manager installed on my laptop and my PC. The strange thing is that it works perfectly on my laptop, no error to a phone message. Just the new "BOLD" last week, connected to the PC, same error. I did a lot of reading through the forums and tried to uninstall and reinstall the Software Desktop 3 or 4 times. Even tried the upgrade of the OS on the curve and "BOLD" on the laptop. Plugged into the PC and the same problem. I can't force the Loader.exe to start the PC when I clicked on the C:\program Files/Common Files/Research in Motion/Apploader, block immediately. Even tired a method describes how to remove registry entries, etc., and tried. Does anyone have new ideas or more detailed in order to solve this problem. Seems to be question of Office Manager as no problem with the same features on laptop.

  I wish you to check the other pocket computer "error: link

  http://supportforums.BlackBerry.com/T5/desktop-software-for-PC/handheld-application-loader-wizard-HA...

  I spent some time trying the different charger and discovered versions this version 6.0.1.15 charger seemed to overcome the problem of error. The idea is to replace your current version of loader.exe 6.0.1.37 that comes with DTM 6.1 with the old 6.0.1.15 version I found on the page to download software of device bell for the torch 9800. It is necessary to install this device software temporarily and then copy this version charger in a location of your choice, say the office and use it later when the dust of the installation is installed.

  See page 3 of the link above for the rest of the info and tell us if it worked for you with some techi-comments.

• HotSync® Manager Application has encountered a problem and needs to close. We are sorry for the inconvenience.

  Hello

  I have a Palm T | X, Palm OS Garnet v.5.4.9 running

  Last night, I tried to install ConvertCalc - CodeThought, Inc. the OS5 version, and it blue-screened my office. (XP Pro)

  Now, Hotsync Manager does not - either at startup, or if I try to start it manually.

  I uninstalled Palm Desktop (v6.2.2) and tried to re - install, but when it comes to HotSync Manager, it crashes with the error in the subject line.

  Clues?

  Thanks a lot for your time!

  Based on another thread and a WyreNut post, I changed my PalmDesktop 4.2 - and am all set...

• LifeCam .exe has encountered a problem and needs to close

  Im trying to use my lifecam on my xp computer, but it does nothing, but saying lifecam .exe has encountered a problem and needs to close. That's all he does whenever I open it help me!

  Hello

  Thanks for joining us out on Microsoft Community Forums.

  According to the description, you get a message error "Lifecam.exe has encountered a problem and work stoppage.

  1. are you aware of changes to the computer before the show?

  2. What is the model number of the device?

  3. What is the brand and model of the computer?

  Method 1:

  I suggest you perform the steps mentioned in the article.

  From Lifecam software "Application has encountered a problem and needs to close. We are sorry for the inconvenience"error message.

  http://support.Microsoft.com/kb/2027807

  Method 2:

  Put the computer in a State of boot is a way to know which application is causing this problem.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  Step 1: Follow the steps in the link below to do the same thing:

  How to configure Windows XP to start in a "clean boot" State

  Note: After troubleshooting, be sure to set the computer to start as usual as shown here:

  Step 2: To configure Windows to use a Normal startup state

  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.

  a. Click Start and then click Run.

  b. type msconfig and click OK. The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.

  d. When you are prompted, click on restart to restart the computer.

  Hope this information helps. Get back to us if you have more queries about Windows.

• "Receive the error message" Microsoft (R) HTML Application host has encountered a problem and needs to close, etc. "when you access user accounts

  Original title: I can't access the accounts of users (XP).

  I can not access (XP) user accounts.  I get the message: "Microsoft (R) HTML Application host has encountered a problem and needs to close etc.."  The APPname is mshta.exe. I have this msg when I click on anything in the user accounts.

  1. What is the problem?
  2. what should I do to fix this?

  Hello Eric_984,

  Thank you for the question!

  It is disheartening to know that have problems you with user accounts. "As I understand it, you get an error message" Microsoft (R) HTML Application host has encountered a problem and needs to close etc. "when you access user accounts.

  I need to ask you a question to help you best.

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  Error message when you try to open the item user accounts in Control Panel on a Windows XP-based computer: "Microsoft HTML Application host has encountered a problem and needs to close."

  Answer to us if you are having problems with user accounts or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  Each time after clicking the icon of user account on windows xp to change a password is crashes with this error message: Microsoft (R) HTML Application host has encountered a problem and needs to close.

  There is a Microsoft Knowledge base article which sets up a few steps to perform in the computer in order to solve the problem you are experiencing, read the article that you find on the link I am mentioning below and see if it helps the measures mentioned:

  http://support.Microsoft.com/kb/919751

• HPSF.exe has encountered a problem and needs to close

  using pavilion hp Elite desktop, windows 7 Edition 150ff Home premium, receive a HPSF error message. EXE has encountered a problem and needs to close. I tried to download it again from the HP website, but I get a message saying "your system does not meet the minimum requirments for this update, update has been cancelled. (1602) my computer has a hard disk of 1 terabite with 8 GB of ram and I have very little installed above with the exception of 4 songs and microsoft office and student that I bought and Norton Internet Security.

  Someone can tell me why I get this message and how do I fix the problem, my office is wired but my printer is wireless, I have high speed internet and I have also a HP Envy 700-019 again at Christmas last year, which has a HD 2 terabite with 12 GB of ram and windows 8, desktop computers are 64-bit. Not used at the same time.

  This message means that the HP Support Assistant had a problem.

  I recommend to uninstall the application from the--> utility Control Panel programs & features and then put it back. You can use the charm of the search and the type of programs & features. Click on the above icon to call the utility.

  You can reinstall from the Recovery Manager.  Invoke the charm of the search and type in recovery and click the icon.

  

  Find the Recovery Manager from the list of drivers and applications and put a checkmark in the box to the left and then click install in the lower right corner.

  

• "WMI has encountered a problem and needs to close."

  Windows Server 2003 SP2 (virtual server) get this popup error every few minutes: "WMI has encountered a problem and needs to close."
  In the application log:
  Source: Application error
  Event ID: 1000
  Category: (100)
  Failing application wmiprvse.exe, version 5.2.3790.4455, failed module ntdll.dll, version 5.2.3790.4937, address 0x000415f7 failure.

  Any ideas?

  Hello

  Your question is about Windows Server 2003 SP2. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
  I hope this helps!

• How can I fix error Pure Networks Platform Service has encountered a problem and needs to close. We are sorry for the inconvenience.

  Whenever my computer load I get this darn error. Pure Networks Platform Service has encountered a problem and needs to close.  We are sorry for the inconvenience. I also get a pop up nmsrvc.exe Application error. The statement as "0x66f23ff0" referenced memory at "0x00000000". The memory could not be 'read' PLEASE HELP!

  Hi heat110,
   
  -What is the brand and model of the router you are using?
   
  -You "Network Magic" software installed on your computer?
   
  Method 1: As a first step, try to restart the service of Pure platform of networks on your computer.
   
  Follow these steps to do the same thing:
   
  a. Click Start. Click run. Type Services.msc and press ENTER.
   
  (b) in the Services window, search for Pure Networks Platform service.
   
  c. right-click on the service and click on restart.
   
  d. restart the computer and check if you have got rid of the error message.
   
  Method 2: Uninstall Network Magic software and then re - install the software by downloading from the website of the manufacturer if necessary.

• "NTVDM. EXE has encountered a problem and needs to close"error after installing the update of security KB2707511

  After you install the update of security KB2707511 when I try to open a ms - dos 16-bit program, I get the following error: "NTVDM. EXE has encountered a problem and needs to close. " Application does not start. I can run without error command.com. Uninstall KB2707511 in Control Panel, add & delete, the application works. Install KB2707511 error occurs.

  I have a lot of customers running a 16-bit MS-DOS - program that receives the same error.  It seems not to be a malware problem, as it is homogeneous across many machines (unless, of course, all have the same problem of malware).  By uninstalling the KB2707511 and the KB2709162 they all work. Something in these updates is in conflict with something in these dos programs causing the "NTVDM. Erorr EXE'.

• At startup, Error Message: dd.exe has encountered a problem and needs to close

  Every time you start the Error Message is: dd.exe has encountered a problem and needs to close. Close.

  "dd" is - in this list.  Looking more far over the line to SD in this list...

  What is the 'command' that launches the application (perhaps to widen the column to see everything) and what is its 'location' (perhaps to widen the column to see everything)?

  (Only for the DD.)

  You could uncheck here, restart and see if it happens again (it will not).

  Then, with the information that I just asked for, there's the real 'location' and remove the 'command' begins with manually to get rid of it permanently.

• "Any new name for the program" has encountered a problem and needs to close. Sorry for the inconvience

  Whenever we try to install something new, that settles it, but when we get the same error message

  "the new name of the program" has encountered a problem and needs to close.  Sorry for the inconvience

  We can't get anything to run now

  Hello

  1 is this problem limited only when installing an application?
  2. what application are you trying to install?

  Method 1.
  I recommend you to reregister the Installer engine.
  Here's how:
  a. Click Start, click Accessories and then click command prompt.
  b. at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister
   
  MSIExec/regserver

  Method 2.
  For other methods, see the article below.
  How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
  http://support.Microsoft.com/kb/2438651/en-us

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Media Player has encountered a problem and needs to close, heartbreaking.

  Recently, while ripping the cd to Windows Media Player 11 on XP Service Pack 3, I'm frequently getting the message "Windows Media Player has encountered a problem and needs to close."  It happens usually during the second or third disc.  I then close and reopen and am immediately able to rip the CD.  Sometimes the player will immediately be closed as soon as I click on "start rip."   Any ideas?

  The same thing happens if you rip to MP3 or WMA?

  Post here the technical details of the accident. Go to Start- run , type eventvwr.msc , and then press ENTER.

  In Event Viewer, access to the application log and look for an error in the list, there should be two entries for the last crash. Double-click on these two events and copy/paste their description in your post.

  Tim Baets
  http://www.BM-productions.TK