PXI-6509 does not attach to the ribbon cable screw

Similar Questions

• We have acrobat 11 and 13 offices.  In word, the Adobe tab does not appear in the Ribbon

  We have acrobat 11 and 13 offices.  In word, the Adobe tab does not appear in the Ribbon

  You need to upgrade AA XI to work with the AA 2013. You must also open the OFFICE tools and activate the Add-ons. There is no tool in some OFFICE applications. You can view the list in the folder of PDF Maker in Acrobat.

• Satellite A120: Microphone does not work when the power cable is unplugged

  I have a Toshiba Satellite Pro A120, which has just begun to play up...

  I regularly record music of my DJ Mixer in microphone of my laptop entry, recording in Adobe Audition.

  Because the power supply makes a buzzing sound, I can't register with the power cable plugged... If I always record with the unplugged power cable, running off battery.

  I've never had any problems before, but what has caused the problem, I now, was earlier the battery ran out while recording, put the laptop into hibernation mode.

  Since then, I can't register with the power cable disconnected. He recorded only with the cable - which is not a good cause snoring.

  It is not a problem with hearing, because in Windows Vista its implemented the problem proved too. As soon as I unplug the power cable, microphone disappears from view.

  I used to work in IT support, so I'm not a technophobe - but I can't for the life of me works why it would suddenly start to occur, power is not related to the entrance it is micro... !

  One of you lovely people have ideas? I checked power options and the Device Manager to see if theres no hardware issues, but there isn't.

  I also reinstalled my sound card drivers.

  It's strange. I guess you tried a boot cold fresh. Hibernation can sometimes cause problems with the devices.

  Try to update the BIOS.

  If all else fails, you may need to reinstall Windows. (Backup your data and run recovery by holding down the button reset during power on)

• G62X-400 (ld642av) does not load, power button ribbon cable could be damaged.

  Laptop of the friend's daughter had a problem with the cable going to the LCD.  When opening it I noticed a few missing screws of the machine near the back and the middle. I disassembled and made the display cable stressed I guess because the flex of the missing screws and when pressure is applied, the screen would come. I replaced the cable and all right, or so I thought.

  Problem is that the tablecloth of the power button seems to be a bit funky as well.  Wouldn't really go back in the connector zif or flip back connector and the small bar on the connector ended detach.  I thought I got it on, it came on, but I didn't know it was apparently no longer take a charge.  Bottom line is that the laptop ran until the exhausted battery.  If the power button is damaged, preventing powering the laptop or charge the battery or something else?

  The answer is Yes - when I force the cable using the pressure, it charges the battery and agrees by the charger.  I'll have to get a new power ribbon cable, because he seems to have lost some of the metal contacts on the bottom.

• Nokia PC Suite does not work on the Satellite A100-234

  I installed the Nokia PC Suite in my laptop (Satellite A100-234) Unfortunately his does not work. The same cable and Mobile is to connect with other computers.

  Please send your valuable suggestions.

  Hello

  Could you please be more specific?
  Did you get the error messages or something else?

  Maybe something is wrong during the installation procedure
  So I recommend removing this Nokia program and try to install it again.

  In addition, I would recommend checking the PC Suite FAQ on the website

• Test Panel does not work with the PXI-6541/6542/6551 in PXI-1002

  Ripping my hair out trying to get the Test Panel can work with system as described below:

  1002-PXI chassis with controller PXI-8176.  In the three places available (from left to right) PXI-6551, PXI-6542 and PXI-6541.  They come in NIMAX, they self test, reset and to calibrate.  But when I try to open a Test Panel, I get an error as follows:

  nidmfpan.exe - Application error

  The application failed to initialize properly (0xc0000142). Click OK to close the application.

  I uninstalled, re-installed, modified and repaired everything NIDAQMX (15.0.1) 15.0 HSDIO, NI-VISA (15.0.1), etc.

  Original symptom is that when I pressed the button on the test Panel, nothing would happen.  Then, the next symptom is that MAX has said MFC90.dll (not found) and MSVCP90.dll (not found) and MSVCR90. DLL (not found).

  I can not find help topics or the forum messages that cover this.  Very annoying.

  Hi fully,

  Sorry to hear that!  Nidmfpan.exe is the process that opens MAX test panels and MFC90.dll is a Windows wrapper.  Combinations of driver reinstall or copy other MFC90.dll files in System32 are unlikely to solve the problem.

  You are on XP?  Try to navigate to C:\Windows\System32 and rename the nidmfpan.exe.manifest to nidmfpan.exe.manifest.back and after close/reopen MAX file and try to open a test Panel.  Is it effective?

  Note that the file you want to rename is nidmfpan.exe.manifest and NOT nidmfpan.exe.

  If not immediately successful, close and reopen the MAX and try the test panels a few times more.  If after several attempts it still does not work and the correct manifest file has been changed, it can point to a deeper problem of Windows that requires a reformatting of the OS.

  Really that's hope!

  P.S. you might get more visibility to a problem as it is in the sections "PXI" or "Digital i/o.  VXI and VME are not widely used these days, so this section of the forums is probably not too much traffic.

• Save for precedent: the "Attachment" object does not exist in the previous version

  I'm trying to save a very simple VI from LabVIEW 2013 SP1 to LabVIEW 2009 but I get this strange error.  The VI contains only basic ex that are available in all versions of LabVIEW (shift logical AND Select,<=, u8). ="" when="" i="" try="" to="" save="" it="" for="" labview="" 2009,="" it="" gives="" me="" the="" following="">

  Missing object.  The "Attachment" object does not exist in the previous version.

  I thought first of all it had to do with being possessed by a lvclass, but even after that I removed the class (and unplugged from the lvclass) it always gives me this warning.

  When I try to open it with 2009, it will fail to load the schema-block (error 6).

  The next thing I tried was to copy the block diagram for a new VI and re - create the connector pane, but that doesn't change anything.

  Any ideas?

  Maybe "attachment" made reference to an attached comment (the arrow of a free label for an object on the diagram). I don't expect the presence of attached comments to cause a SFPed VI to not open, but it's the only thing I can think of. Try to remove any comment attached to your diagram and SFPing and see if that solved the problem.

• My library 'Photos' of Mac does not appear in the menu of left iMovie.

  My library 'Photos' of Mac does not appear in the menu of left iMovie.

  What version of iMovie using you?  Only iMovie 10.x.x can view the photo library. Older versions of iMovie are incompatible.

  My library 'Photos' of Mac does not appear in the menu of left iMovie.

  The library never showed?  Check if your library currentPhotos is attached to the photo library of the system.

  Pictures of launch and open the preferences. The button "use as system library" must be grey, as shown in this screenshot. If the button is gray, click it, and then restart iMovie and Photos or restart your Mac.

  

  It may take some time after you set up your library of Photos, before it becomes visible in the media browser.  Photos needs to create previews, and's done it by background processes, let it run overnight.

  If the library does not appear, repair the photo library, as described here: https://help.apple.com/photos/mac/1.0/index.html#/pht6be18f93

  Is your photo library a library of iCloud? Fix library will be to download again to iCloud. Fix it only as a last resort.

• Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.

  Firefox does not (Cup) of the lower edge and the right edge of the graph. IE10 does not work.
  Office Windows 7 2009 service pack 1 Firefox 26 Internet Explorer 10
  Flash player version 11.9.900.170 plugin 11.9.900.170 activex version used by Firefox

  Problem began late November when Miniclip.com forced updated flash player to version above
  -C' was when they started to play a video advertising in the game box before you could start.

  Have screen shots of IE10 and Firefox26 side-by-side clearly showing the problem - how these can be downloaded for see you? E-mail? Web site? This place seems to be text only?

  In the meanwhile the grandchildren and self have learned to use IE10 instead of Firefox that we prefer.
  Their House of Windows XP has same Flash Player in Firefox and it works fine.

  Downloaded two screenshots on Media Gallery.

  You can not attach a screenshot in the first row who starts a thread, but you can do it in subsequent responses.

  Try disabling hardware acceleration in Firefox (you will need to close and restart Firefox).

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  See also:

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Reset the zoom of page on pages that are causing problems.

  • View > Zoom > reset (Ctrl + 0 (zero); 0 + Command on Mac)
  • http://KB.mozillazine.org/Zoom_text_of_web_pages

• Max of tasks is does not display in the tree

  I don't know if it's good advice or not, but it is not a Council of MAX.

  I'm having a problem in Max where I can create a new task, save it and it does not appear in the tree of the task, but I can access in the browser window in Labview. I attach 2 images below to show the problem. Thanks in advance for your help

  This looks like a MAX Database corruption problem, the following link contains steps on how to fix corruption of the database:

  http://digital.NI.com/public.nsf/allkb/2C7480E856987FFF862573AE005AB0D9?OpenDocument

  Let me know if it works for you.

  Nathan P.

• LV TEN F5 SP1 does not appear in the components for deployment...

  Hello

  Just migrated my x 32 to x 64 TS2014 TS2013 LV2013 & apron & LV 2013 x 64. I'm now trying to build a new installer for deployment for my test stations, but LV RTE SP1 F5 does not appear in the components for deployment, even if it is properly used as adapter labview Teststand sequence editor... why?

  I can see RTE SP1 F3, but not F5...

  If please see attached picture to see my setup teststand (showing the labview adapter) and the list of parts available in the deployment utility.

  Thank you very much for the help.

  C.

  Hello

  Thank you for the information.

  As a temporary solution (as of 2014-12-04), I manually installed the SP1 LV F5 RTE 2013 on the test station.

  Here you can find the downloadable version:

  http://www.NI.com/download/LabVIEW-run-time-engine-2013-SP1/4539/en/

  Thank you and have a great day,

  C.

• HELP - read file that VI does not stop at the end of the WAV file

  Hello

  I am a beginner and I'm working on a project that opens a .wav file and it plays (with volume control). I found all the associated examples sounds extremely useful and I can just edit the audio file to output.vi his example to my project.

  I'm running into a problem where the vi does not stop at the end of the wav file, and it seems for a while loop. the wav file I am using ended a long min (and it has been converted to a data file in a wav file, if it matters). I have attached my vi modified here and appreciate any help.

  Thank you!

  Christy

  The OP and the æ OR

  Please go to help on the toolbar. Then select examples and search for sound. Locate the sound file "for his Output.vi.

• Case Structure sequence does not move to the next iteration

  Hello

  I am trying to create a multifunction data acquisition and control of a laboratory instrument. As shown in the attached VI, I finally 3 different modes: simple, door double door and GC, each with their own functionality. So far, I worked only on the Mode of the door, so that the rest are empty. However, trying to make the system to wait for the interactions of the user, if the key 'only start door mode', it moves in this case without problem, and if there is no hurry, he waits, bike to the tab control like I want it. However, after execution of the VI with the pressed button, it will not return to the 'Wait' case, he freezes in "aquire" and refuses to return to the case "wait." I'm sorry if this is confusing, I think it will be clear when running highlight is used, it freezes just after the correct number of iterations in the loop for. thank you for your help,.

  <><>

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  Hi Eric,.

  I think the sequence works as you want.  When I run it on my computer on my computer he is turned down for the case of waiting as you want.  I don't have to open the VI called single door Pulser.vi and manually, click on the button to stop inside the VI but after doing that it moves to the cae of waiting.  Also, I noticed that you have a constant wired up to the judgment of the outside loop while. This isn't really a good idea because it forces you to use the button abandon.  The button abandon does not stop correctly the VI and could cause other problems.  I suggest you to have a stop button on the front panel somewhere to allow the judgment of the user of VI.

• Problems with my installation of Windows XP and my computer does not start on the CD.

  Hi, I need BIG help here please!... I wanted to do a fresh install of Win XP Pro, but my PC didn't boot from the XP CD... I changed the BIOS settings, the sequence start on CD, restart my PC and he kept boot from the HARD drive and the PC does not recognize that there is a CD-ROM drive. Once the start-up of the PC from the CD, I wanted to delete the partition and format the HARD drive, but it says "Setup could not format the partition...". "something like that... so what I did I have the PC from the boot CD, click in the command line and 'R' for repair, I wrote"format c:"and after that, I wrote" diskpart remove C:' so I deleted the old partition, create a new and when I wanted to install XP on it, I could not because the PC does not start from the CD... how can solve this? "

  Thank you!

  original title: HELP for the installation of Win XP.

  Hi Jorge,.

  So the only thing I can think is that it is a sort of master/slave thing.

  Your IDE HDD will be a Knight, probably alongside where the power cable is inserted, to dictate whether the player will be considered to be a master, slave, or cable select. Assuming that it is the only HARD drive in the PC, make sure it is designated "master". Then, in the BIOS, make sure that the boot order is specified as HDD0 first (as opposed to HDDx where x is greater than zero).

  In addition, assuming that the data cable is the new type of Ribbon with strands of 80, make sure that the blue connector of the IDE data cable is in the motherboard and that the end of the black connector is in the HARD disk and, if it is a two-disc data cable, do not use the gray connector.

  Tricky

• The course that I did for the OCP certification in Oracle Database 11 g does not appear on the list of courses on the pearson Web site view.

  The course I did for the OCP certification in Oracle Database 11 g does not appear on the view list of courses on the pearson Web site, I sent an email to [email protected] < deleted by the moderator e-mail address > , no response within 7 days since 01/28/2015, enamel is lower, the title of my course is in Portuguese.  What should I do in this case?

  ------------------------------------------------------------

  Dear Oracle.

  I send you this mail because recently I passed the exam 1Z0-053-Oracle Database 11 g: Administration II, which is the last review necessary to acquire the OCP Certification. However, in the path to certification, I need to prove that I participated in an official Oracle training.

  Research for the course on the site to view pearson, I did find the name of course on the list. So I'm sending you this email with the courses required for certification information. I attended the course at FIAP College (http://www.fiap.com.br/en/conheca-a-fiap/parcerias-estrategicas/), in the city of São Paulo (Brazil) of March, 2010 until March 2011. The above link is possible to check that the University is a partner of Oracle. The title I had was "Graduate in Oracle Database Management".

  In this e-mail, I have attached a copy of the certified course FIAP (front.jpg, certificate Back). I also send my profile data in the site view pearson (Pearson VIEW - my profile.pdf) and my scores on tests for certification of OCP (1Z0 - 051.pdf, 1Z0 - 052.pdf, 1Z0 - 053.pdf).

  If you need additional information just let me know and I'll give you.

  Please acknowledge this information and give me the OCP certification (Oracle Database 11g Administrator Certified Professional).

  Kind regards.

  Italo Moises dos Santos.

  Oracle ID: < deleted by the moderator test >
  

  ------------------------------------------------------------

  I did this way, because the https://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP link has not worked, I sent my class even without knowing if it will be accepted, so I exchanged a few emails and my journey has been accepting.