PXI, switching boards causes the boot can´t pc

Similar Questions

• SINGLE HOME PC - SWITCHING PROFILES CAUSES THE TEMP PROFILE

  3 profiles on our PC (two admin, standard) - a profile of the user disconnects , then the next user log in profile there - sometimes (once a day) users of 2nd and 3rd get loaded into a temporary profile.

  Two profiles will still be assigned in this case - and with different combinations. One of the admin profiles will still be able to load ok however.

  A reboot solves.

  If we switch users without logging off the coast - it's not the case! (we have to connect to all accounts first thing for this workaround to work and do no work on profiles up to this that they are all running).

  Temporary user profile is also never a problem when a single user is was working alone and that a single profile is loaded up.

  What is the cause?

  Hi Toneclone,

  This isn't a problem of corrupted user profile, the event logs suggest the winlogon.exe process thread.

  I guess that you didn't try the tool that I posted last time. Try to install this tool and see if it is resolved
  http://blogs.technet.com/UPHClean/attachment/3145464.ashx

  This tool will add a user profile cleanup assistance service which should help the regular clearingup user profile service files while closing a session

  Check if the problem persists in safe mode, if there is no problem in safe mode, and then try to clean boot (see http://support.microsoft.com/kb/310353)
  If problem does not persist in the boot as well, then activate the starting points and a bit at the time of services and check, filter the right one and reinstall or remove the program.

  Hope this helps,
  Lava.

• Win 8 upgrade - the user can cause dual boot using the same license?

  Hello

  Thanks to MS for offers updated Win 7 for win 8 to 14.99 USD for all new buyers of Win 7 PC after June, 2012.

  I'm one of the eligible candidates for the upgrade at this price. However, I spent a lot of time, money and effort to put in place the Win 7 OS so that he could function at an optimal level I want.

  My understanding of an upgrade to win 8 is to lose everything I have Win 7 and replace the entire operating system to win 8 via a download from the MS. Download Center

  The problem is that I don't know if Win 8 is what I like and not sure if it is better than Windows 7. Reinstallation of Win 7 back takes time and effort.

  Do I know if the user can install Win 8 to another partition primary drive c during the upgrade, retaining the original Win7 (same license) to the other partition?

  If this is the case, it would be a great bonus for the new buyer of Win 7 PC, otherwise the user need to spend more money to buy to win a CD of Installation of 8 at the store and install t to separate partition.

  Thank you

  Low

  You can dual boot with the free upgrade, so that you upgrade to the eligible license, in this case Windows 7. If you want to dual boot Windows 7 and Windows 8, you must buy the full version license, what is Windows 8 Pro for use staff system

• How can I add an existing program for the boot menu (so that it is initiated when I turn on the computer)

  Long story, but I accidentally deleted the program pad track (DellTPad) to start the ritual.  So now I can not turn the touchpad switch.   How can I get the program in the start menu so that I can control the touchpad again?  I found the DellTPad program on the computer but I don't know how to get it back in the boot process.  I don't have a decent backup to restore.

  Send a shortcut on the desktop. Then, without letting go of taken, drag it to the Start button, all programs, in the startup folder and drop it.
   

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

  1. did you remove Bootcamp using disk utility?

  2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

• I lost my iPhone 5 and the "Cell" switch is off. How can I turn on it from another phone?

  I lost my iPhone 5 and the "Cell" switch is off. How can I turn back on from another phone so I can activate "Find my phone"?

  You can not. There is no method to remote turn on/off all the settings on the phone. The only thing you can do is put it in mode lost through the computer and it remains to be seen if the device connects to a known Wi - Fi network. Otherwise, you'll just go out and pick up the old-fashioned way. You have it in Mode plane, or you just disable cellular data?

• Re: Satellite A50 - how can I change the boot with BIOS password priority?

  I have a Satellite A50. I need to restore to factory default to recover DVD, how do I boot from the DVD?

  The default boot priority is the HARD drive and is more bootable has been formatted. My BIOS is password protected, how can I change the boot priority? After having inserted the password, its always boot from the HARD drive.

  Thank you

  The boot priority, that you can change in the BIOS.
  Go into the BIOS with ESC, enter your password and then you can change it.
  But don t forget to save the changes.

  That s all and then you can boot from the CD.

• Programming on Board on the PXI-6132

  Hello

  This is my first post, so please be abstain.

  Asked me to develop a Labview Vi for the acquisition of data. I must acquire and a number of disintegrations exponential (as happens during the discharge of a capacitor through a resistor) averaged for calculating the decay constant. My boss has already bought a chassis PXI-1073 with a PXI-6132 to acquire the data. My question is this: since the sampling rate must use is very high, I want to minimize the amount of data transferred from the PXi system to the computer, with my system (windows 7, LV 2011, nor-DAQmx?), so it is possible to "say" the PXI-6132 to isolate the data belonging to the decomposition of exponantial on average several decays, then send the data to the host?

  Thanks in advance for your help

  Channel counter in the example I did you, is the meter, you use to generate the clock signal. Therefore a finished with 30 pulse pulse train if you want to acquire 30 samples.

  This channel can be configured as redeclenchables and control 'Source', you must select the PFI where the trigger signal is wired. It depends on how you did.

  The clock signal is routed internally, which means that you don't need all cabeling, simply select the right source for your route of entry of the AI (for example. Ctr0InternalOutput if you selected against 0).

  So external signals will only be ounces you want to measure with Amnesty International and the trigger for the clockgeneration (counter) signal.

  In MAX, you can do a right click on the device and see the layout of the pins on your device.

• I can't connect wireless on the stage of the boot

  Hi all

  I hope that someone can help.

  I have a Pavilion G6 2002au and he died,

  I am trying to reinstall the windows 7 Home premium 64 on that.

  I can't connect wireless on the stage of the boot, it off when I was running for a recovery.

  dose - does anyone know how this can be done so the I can reboot the system.

  Hopefully reinstall the wireless drivers?

• HP Elitebook 8740w: How can remove the text / name of the company that is displayed during the boot process?

  Hello

  I bought my work laptop from my employer. During the startup of my employer's legal name is still displayed on the splash screen ' "(the screen with the HP logo).

  -J' already started back and ran the EREPLOGO. EXE utility to remove the logo (ereplogo.exe/e). The utility said that the logo has been removed;

  -in the BIOS 'view custom logo' is unchecked, so it will not use an image of the partition tools hp;

  However, during the startup the company name is still displayed on the top of the screen... :-(

  (1) how can I change this text to start or remove it completely?

  (2) what can I do to display the specifications of hardware during startup instead of this "splash screen"?

  Thanks in advance,

  SJW

  PS I have the latest BIOS (F.60 Rev.A, November 30, 2015)

  Hello

  I managed to change the line of text with the BiosConfigUtility64.exe.

  With "BiosConfigUtility64 getconfig:config.txt", you can write all the values in the bios and a text file with "BiosConfigUtility64 setconfig.config.txt", you can set all the values after you change the values you want to change. In my case, that I had to change the value of "property tag", which is the value that appears in the home screen during the boot process.

  Later, I discovered the tag 'property' can also be changed under the Security tab of the configuration of the BIOS (F10) normal... until I knew what the property tag, I associate the line of text to security so I did find the text before :-) field

  Best regards

  SJW

• I tried to write a script, the user can use. This return number file *.tiff associations back using the image viewer is caused each month.

  Original title: automation of file tiff without elevated rights association

  I tried to write a script, the user can use. This return number file *.tiff associations back using the image viewer is caused each month.

  Hi, Unclemarcus2002,

  You would be wiser to post on the Forum TechNet where there is COMPUTER experts.

  http://social.technet.Microsoft.com/forums/en-us/newThread

  Maybe using the ASSOC and FTYPE command in a script will do what you want? I think that these orders would also apply the association throughout the world, rather than on a per-user basis.

  ASSOC: http:

  FTPYE: http:

  Here is an example, that you can try.

  Let's say you have a text file called "foo.bar" and you want the extension .bar always open with Notepad. There is an association for text files, so get him by typing "Ftype | more' at the command prompt (it will make a major announcement). Finally, you'll see the line "txtfile". On mine, it's "txtfile=%systemroot%\system32\notepad.exe %1" without the quotes.

  First create your association: assoc .bar = FooBarText

  Now to assign your request to your file type association: ftype FooBarText=%systemroot%\system32\notepad.exe %1

  You should now be able to double-click the foo.bar file and it will automatically open in Notepad.

  If you already have a Microsoft Office Document Imaging association, I think that it should be relatively simple type of substitution. Use ftype /? for a little more help.

  http://community.Spiceworks.com/topic/119639-Windows-7-automate-file-assocations

• TravelMate 2480. I can't change the boot order.

  Hello
  I thought I posted this before, but I can't find the post.
   
  I have two laptops from Acer 2480.
  2480-2943 and 2480-2247.
  The 2943 is my laptop everyday.
  I keep the 2247 as a backup.
  Both running XP Home.
  I used the 2247 to clone my desktop hard drive.
  I need to change the boot order so that I could reboot from the hard disk and not get hung up on the USB hard drive.
  I put it to boot from USB before Primory hard disk a few years so that I can boot from a USB key.
  In the BIOS, when I try to change the boot order by moving the internal hard drive upward, using the ' Shift + ' I hear a beep and nothing happens.
  I changed the front boot order but now I can't.
  There is no password.
  So I tried e the same on the 2943 and found I have the same problem with that.
  I changed the boot on this one before order.

  Any ideas?
  Joe

  Instead of pressing "Shift +" to change the position, use the arrow keys to highlight the item you want to move and press F6 or F7 to change the boot priority.

• I can't get connected to Windows Live Messenger.__Everytime I connect happens __Can "Windows Live Messenger has stopped working, a problem caused the program to close down" help please

  I can not get connected to Windows Live Messenger.
  Whenever I connect it comes up "Windows Live Messenger has stopped working, a problem caused the program to close down."
  Can you help me please

  http://www.windowslivehelp.com/forums.aspx?ProductID=2

  They will help you with your WLM questions when repost you your questions in the Forums above Windows Live Messenger.

  See you soon.

  Mick Murphy - Microsoft partner

• The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more

  My daughter's office got fried during the last storm, even though she had a surge protector.  Obviously the power company line was bad.  The pc seems to have gone to a previous set point during the boot, but now she can not install software and doesn't seem to have Norton AV more.  When she tries to run a system restore it gets "extended attributes are incompatible."..: thank you for your help.  Debbie

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Run the scan tool (SFC) System File Checker and check if it helps.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.Microsoft.com/kb/929833

  Method 2:

  Try to clean boot, and then check to see if this helps you.

  How to solve the problem by running the clean boot in Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 3:

  Try the steps in the following Microsoft article and check if it helps.

  Problems installing and uninstalling programs on Windows computers:

  http://support.Microsoft.com/kb/2438651

  Hope the helps of information. Please post back and we do know.