SINGLE HOME PC - SWITCHING PROFILES CAUSES THE TEMP PROFILE

Similar Questions

• PXI, switching boards causes the boot can´t pc

  Hello

  I pxi-1044 with some pxi cards (pxi-4065 / 6509 / 2529 / 8431 / 8432 / 2576 (3 borads))

  and the pxi-8310 controller.

  When the system has been configured for the first time, it works well.

  but 2 of the borads (pxi-8432 / pxi-2576) must slot interchange (due to problems of space with their own, conectors)

  When the system power, both led (on pxi chassis) and together (led controller), but windows xp does not start,

  Led CONTROL switch to and restart the computer. over and over again.

  I remove all the advice and check that all are recognized through MAX except the two planks of switching.

  Change to a different location (never used) and the look of system work ok, pxi-8232

  this Council is recognized.

  What is the correct procedure to exchange some tips when MAX has a previos configuration?

  I would use the slot machines that I have problems with, is it possible?

  Thank you

  Insteading of delete here or trying to remove, we can always Dispatcher threads.

  Suite here. 

• Error "this program has stopped working. A problem caused the program blocking work properly"when you try to open the Kodak Home Center

  Original title: notice of work stop Windows

  I recently installed an update of Kodak Home Center version for my printer.  When I try to open the Kodak program and print photos, I get the Windows message: "this program has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available.  Does anyone have a solution to this problem?

  Hi JoeBuono,

  Follow the steps below:

  Method 1:

  Start your computer in a clean boot state and see if that fixes the problem.

  See How to solve a problem by performing a boot in Windows Vista or in Windows 7

  Note: Do not disable any program startup list Kodak when you perform the clean boot.

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.

  See also: troubleshooting install or uninstall programs

  Method 3:

  See:

  Message: "AiO Home Center has stopped working" when editing and printing photos

• Can I recover files and folders moved to the Temp profile

  Hello

  A user is logged on with a temporary profile on Vista.  They have seen their name in the start menu and assumed everything was fine.

  After having seen that their office was wrong, they went check 'My Documents', and obviously they weren't there.

  The user then crossed ' computer > C: > users and found their office and documents.

  Then they moved them (not copied) on the desktop and "My Documents" to the active profile.

  Now when they have logged off and back on, their original profile has been restored but their desktop and "My Documents" have been shortened just to the Temp profile.

  Is it possible to recover data from the user? keeping in mind that there is no backup of their data.

  Any help will be appreciated.

  Thank you

  Mark

  Hello

  A user is logged on with a temporary profile on Vista.  They have seen their name in the start menu and assumed everything was fine.

  After having seen that their office was wrong, they went check 'My Documents', and obviously they weren't there.

  The user then crossed ' computer > C: > users and found their office and documents.

  Then they moved them (not copied) on the desktop and "My Documents" to the active profile.

  Now when they have logged off and back on, their original profile has been restored but their desktop and "My Documents" have been shortened just to the Temp profile.

  Is it possible to recover data from the user? keeping in mind that there is no backup of their data.

  Any help will be appreciated.

  Thank you

  Mark

  Hey DRIVE brand

  It's not my computer or my documents as such in vista

  It is a term of xp

  they are the points of junction in vista read below

  http://www.Svrops.com/Svrops/articles/jpoints.htm

  These are vista forums where vista tips are given

  Here are the tips from microsoft on a temporary profile loading in vista

  "Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administrator. »

  http://support.Microsoft.com/kb/947242

  Walter, the time zone traveller

• How to turn off the switch profile and Auxilliary Metadata set on UCM checkin screen?

  We use webcenter content 11.1.1.6 with component installed on file management

  While trying to record a new document, a recording normal screen or to manage spare screen two options come at the top "Switch Profile and Auxilliary Metadata set.

  How these options may be disabled?

  lockDownProfile = 1 profile of switch turns off.

• Sort of the research, New Check-in and Switch Profile drop downs in UCM

  Hello
  IHAC who would want to research, New Check-in and the Switch Profile drop down sorted by alphabetical order. Has anyone done this before for a client? Have you created a custom component or was there a configurable option available?
  
  Thanks in advance,
  Ananta Ahluwalia

  We just released an update today has 11g compatibility as well as backwards compatibility with 10g.

  http://corecontentonly.com/2011/09/29/alphabetizemenus-11g/

  Jonathan
  http://redstonecontentsolutions.com
  http://corecontentonly.com

• In Win7, how move you or rename a single multimedia file or media files containing single file without causing the library of Windows Media Player become corrupt?

  I am trying to manually rearrange media in a way and records are arranged and named on my Win7 PC. I need to be able to move and rename files and folders individual.

  The problem is that the traditional method of doing such things (i.e. the cut/Paste and Rename commands in Windows Explorer) will cause the damaged Windows Media Player library. It seems that all the changes to the paths of the multimedia files must be made in the Windows Media Player interface. However, I'm unable to find options to move or rename files or folders in WMP.
  I am aware that there is a way to move and rename all the files and the folders that contain media files automatically, but not what I'm looking for. As far as I know, it does not allow me to select only the files and folders, and it offers very limited options for what could be the new places and names.
  What is the feature I want to exist in WMP? If not, is it possible to do outside WMP which will not cause the damaged WMP library? (Also, if not, why not, Microsoft?)
  Thank you

  Hello

  You can change the location of folders in Windows Explorer.
  After changing the location, I suggest you to rebuild the Windows media player library.
   
  You can check these links:
   

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-media-information-in-Windows-Media-Player

   

  http://Windows.Microsoft.com/en-us/Windows7/change-how-you-display-items-in-the-Windows-Media-Player-library

   

  http://Windows.Microsoft.com/en-us/Windows/explore/fix-album-art

   

• Switching sites causes DW to cling to 255 seconds. Only since the upgrade to DW2015.

  Since the upgrade to 2015 DW, I had an unpleasant experience whenever I go to another site of edition. This problem only occurs when you switch to a large site, for example with 1000 lots of files. I didn't have this problem with DW2014, or any version dating back more than 10 years.

  I'm using the drop sites in the files tab. When I go to a large site (e.g., 13 000 files) I get the quick note where it says "Open Site" and where DW account files.

  
  

  Then I get the beach ball, I hear my CPU whirring upward, and I have to wait * literally * 4 or 5 minutes for the control back. Some DW made, it is not being cached, because if I move away to a small site (which is instant) and then switch back to the same large site, I have to wait another 255 seconds for control to return.

  
  

  Is there some "typical" I can disable to make faster from sites DW? It is unacceptable when I want to make a 1 minute difficulty to a site, but must be DW to HANG it for 5 minutes to make this minute 1 difficulty.

  What happens if you clear the cache of the site for the offender in 2015 CC?

  Site > Manage Sites > click on the site you have any problem with > Edit > local news > uncheck activate the Site Cache

• Vista Home Premium Screensaver Aurora and the energy of Windows

  Since 3 weeks I have had really bad luck with 2 of your screensavers and my 4 graphics cards. I'm not sure what kind of screensavers guys do but 2 named Aurora and Windows energy should never have been released to the public without testing, including the impact on your GPU and overheating.

  In the last 3 weeks I was troubleshooting problem vista Home Premium 32 - bit Windows and freezing issues. Card provided with the computer was GeForce 6150 TO work for about 2 months and then computer began to do bad things, freeze, stop, don't work sometimes and some other questions. I thought it was bad GPU so I replaced it with my HIS ATI Radeon X 1950 Pro, this card gave me warnings 12 hours after it has been installed that card is running a little hot and the ATI software will lower FREQ map. This card lasted about 2 days and he died too, but this time model would be just weird points and not whole screen is unreadable. I installed the program called the fan speed to monitor and record what is happening with this card. Computer has been used for business only IE and a few other small programs where ran, no games or anything. Since my last card was fried I replaced it with my GeForce 7900 GT OC, this card gave me the nice amount of needed data, but at the same time, this card lasted only 3 days.

  I thought as the fans run at full speed and becomes pleasant cooling perhaps is the PCI-E slot which is a short or something, wrong.
  Today I went to the store to buy PCI card, got nice $65 GeForce 6200 and plugged in, the fan speed is ready to record everything, Idle temperatures where 41 C for 47 of the CPU and GPU. I was doing some defragment and antivirus, trying to run the CPU at 100% and record what is happening that I was also running Media player and other programs with Visual effects to see if I can push this cards Temp. above its limits, after 2 hours of messing around with this, I gave up and is gone to smoke a cigarette, returned screensaver has been running (Aurora btw) off and checked the temp. Newspaper.

  Fan speed showed warning and GPU temp to 85 C. Then I then and tried the same thing on the screen saver Windows energy and got the same results, just go inside the screensaver and clicking on Aurora screensaver will bring your cards temp at least 5 c in a second.

  Since I do not use Vista (and will never) on my home computer, I was wondering if someone with the GTX 200 series can try and test this point and see how many temp. changes on his rig during this operation. I my rig with windows XP pro and don't know if I can get Aurora or energy of Windows XP to test it on my GTX 260 sli.

  Thank you

  I would check the power supply. A screen saver will NOT cause to burn three cards. MCDST
  A founding member MCITP - technician Support Enterprise-
  MCTS - Configuration Vista - Charter Member
  MCTS - specialist licenses in Volume, small and medium-sized organizations - Charter Member
  MCITP - Consumer Support Technician
  MCTS - Windows Server 2008, Active Directory Configuration
  MCTS: Windows Server 2008 Network Infrastructure configuration

• Skype or last update causes the disconnection, accidents

  Have used Firefox for several years. Today, I was forced to upgrade to Skype 7.1. Immediately after the installation of Skype, Firefox would be is more to connect to internet or load web pages (tab "connection... ("say forever). Other applications and browsers work fine and there is no interruption to the internet connection of the PC. After about 2-3 minutes of this, Firefox will crash if left alone.

  After that, firefox.exe remains as a process and can never be completed. I try 'end process' and 'End process Tree' in the Manager of tasks without success.

  Firefox remains a task in the Manager of tasks forever, even when the browser window is closed. If I try to re - open Firefox from there, I get the error "Firefox is already running but is not responding". When I click on "Close Firefox", I get a new error message that says: "cannot load your Firefox profile. It may be missing or inaccessible. After that I'm 'OK' of this, I can't do anything else that to restart the computer to get rid of firefox.exe Manager tasks... and then the cycle repeats.

  Not sure if Skype is to blame that Firefox updated itself today. I blame Skype because it was the same Weird hanging in the Task Manager without ever closing until I disabled the video processing in Skype (and due to the suspicious timing).

  I tried clean re - installed, running Firefox with disabled modules and re - install Skype as well. Same behavior in all cases.

  Any suggestions? Note that I am submitting this from another machine.

  This may mean that a loaded program is causing the problem.

  What type of blocking programs do you use?

  Check the programs that are on your computer

  Windows: Start > Control Panel > uninstall programs.
  Mac: Open the folder "Applications".
  Linux: See your user manual.

  Go through the list. If you find something that you do not
  know what it is, use a search on the web.

  The problems of Firefox caused by malicious software {web link}

• All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer

  All of a sudden, the Yahoo homepage is different with Firefox. How to bring back the old home page? I prefer the one that is always displayed on Internet Explorer. I deleted Firefox and re-installed but the rest of the problem. Help, please.

  Well, it's a problem in your Firefox. To me this https://www.yahoo.com/ page looks like the screenshot of IE.

  Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Click the menu button

     

     , choose historic, then on clear recent history...

  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• A key using self-powered USB causes the base station go "off-line".

  I found that by using a USB drive self-powered, as the WD My Passport, without a USB powered, hub attached to the base of the station USB port has caused the base station go "off-line". In fact, using a powered hub does not always remedy the situation, but it is more reproducible without one.

  This is true for the AirPort Extreme and Time Capsule 802.11ac. The problem does not occur immediately, but it may happen over several days. The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  My question is if others have had the same results? ... and did you find permanent solutions?

  

  USB key "seems" less reliable on the airports of AC model than on previous versions.

  I tend to not use USB attached to routers because I think it's convenient mediocre and poor speeds. But I tested with previous models, and it seems ok...

  KT those a few posts here a me trial there. These are not self powered readers... who I have long recommended people avoid the use (without a powered hub)...

  Re: External backup drive down regularly

  In fact, the wire is different from what I remember... Age don't you know.

  But I did the test on an AC TC. The result has been very reliable. He did not cause the TC to close... but I lost the connection of the USB almost every day... except for a trial where I kept the USB drive mounted in the Finder... so that the USB drive wouldn't turn it down. He then worked for a few weeks... until what the noise of rotation of disk (sitting next to me) drove me crazy... as soon as he was mounted is more, he would pass the same existence as before.

  The previous model TC was barely big enough for the internal use of the power supply units. So powered car running disc was impossible.

  Provide EI (GEN 1-5) at 1. 8A and 12v was adequate, but the standard USB port is estimated at 500 my wrong to manage disks free power.

  You would certainly think AC 12v 5A power supply models would have a lot of power. Yet, power problems are a major problem still. Supply is extremely sensitive and stop easily for reasons I'm still to understand.

  Where the long threads on power issues to the AE.

  Now, I'm going to speculate... I think that SOME problems are associated with power.

  What is the USB port side in airports of AC? Is it still 500ma? Apple never seem to give easy to find info on these details.

  Do you know? I haven't measured it, but I can try timing the time it takes to charge a phone.  Assuming that it will immediately trigger.

  Then he will have problems with a self-powered drive. Even if the drive has less energy than quotes, current during starting is much higher. The restriction of the power on the USB port is managed by a self regulator recovery... Once you triggered it, you must stop the power... then reboot the machine to restore power.

  Then, I also did the test with hub powered... and like your results... It was better. Longer time between the drive disappears from the network. But it was not enough to stop it.

  There is another interesting effect using self-powered hubs... I discovered this on a computer running Mac OS lets say! The computer would not start with a powered hub connected to the front USB. Hubs self-powered cheap, showing a defect in their design. They can refer to the USB port. In this computer, it was enough to stumble on the good power circuit and prevent the supply, commissioning... As long as the computer is running, everything was fine... but if I turned off it would not start. I finally woke up I had to exit the USB every time. At one point, I made a "special" Cup USB cable 5v line so the hub can stay connected. You can probably just to isolate the 5v of contact in the USB. Regardless of the configuration of power USB in the AE or TC is as you can assume she's sensitive enough... and at any time when the 5V on USB hub exceeds the 5V in AE it could trigger.

  The symptom is that the player is no longer lies in the Finder, or the base station appears in AirPort Utility.

  Endangered of AU base station is not uncommon.

  It responds to the pings? I guess he still has lights but is he blocked? You still get internet through it?

  Try to open it manually in to THE... use of the file / configure from others and put the IP address of EI.

  Talk with me by e-mail... It is open in the profile.

• Satellite A60: Switch wireless on the side is taken on

  Hi I have a laptop Satellite A60, I want to turn on my wireless LAN but the switch on the side is covered on as it is just for show. I to believe I can turn it on, the symbol to the fron and the on / off on the side, but as I said is covered more and not a switch like showld be. Theis means I can't get a wireless connection or is it a fault in Notepad? Help, please.
  Thank you very much

  I don't have an answer, I just want to share your frustration. Recently I got a wireless home hub, but I can't go to this topic with my A60.
  I also have the light at the front and the switch sheets on the right and a manual that talks about wireless LANs in bright tones.
  I was led to believe it was active wireless, but it isn't!
  Sometimes even with a graphic 'research Wireless' but it is useless if it doesn't have what it takes to work [when it is in. the wireless Hub].

• OS update 10.11 El Capitan, causing the crash MacPro

  MacPro (mid-2010) 2.8 GHz Quad-Core with 32 GB of RAM ECC DDR3 and an OWC SSD 480 GB Accelsior, AMD Radeon HD 7950 graphics card.

  I tried to upgrade 10.10.5 to 10.11 three times with the same result - startup gets about 80% of fact and accidents with the information on the screen. Then goes through the same cycle over and over again. I also have a two monitor Setup, and a single monitor is active (when I recover 10.10.5 both work).

  Any ideas on what is causing the problem?

  

  Remove the CalDigit. I suspect it's a USB 3 PCle card. There is at least a CalDigit PCle card which is causing your problem.