Q: how to set the parameters of entry and exit

Similar Questions

• How to set the parameters of width image scroller

  I followed a tutorial on how to build an image thumb wheel. In this tutorial the scrolling of the image extends from one side of the stage to the other, i.e. flash to the edge. I want to shorten in width, as 50 pixels or the other side of the stage. How to set these parameters? What would be a line of code to cut where I want? Here's what I have for the construction of the wheel:

  /////Build Scroller MovieClip to Contain Each Image
  var scroller:MovieClip = new MovieClip();
  var padding:Number = 10;//creating a var for padding to be used later on in easier calculations
  
  this.addChild(scroller);
  scroller.y = 600;
  scroller.x = padding;
  

  (I tried scroller.x - but he only positioned the scrolling differently on the stage. Once it scrolls on mouse over it yet completely jumps to the left, and in any case it doesn't take care of the right edge)

  Chances are that you only need to add a mask for the scroller object.  Create a rectangle that is as wide as you want the thumbs on the stage that it becomes a movieclip/sprite and assign it an instance name.  Then assign it just like a mask for scrolling using the: scroller.mask = masksInstanceName;

  You may need to adjust the code of a scroller for use limits of the mask instead of the scene if it currently specifies limits for scrolling.

• How to set the parameters of the Justification

  Hello

  I'm trying to set the parameters of the justification of a paragraph using a different Set of IJustificationStyle accessor methods, but the paragraph does not reflect the changes I put in the Set accessor methods. I can see using the IJusificationStyle-> GetWordspace method that the value has been changed.

  I tried to recompose the wax using IFramelistComposer-> RecomposeThruNthFrame() method after setting the values, but still the paragraph will not reflect the change in values.

  Any help is much appreciated, thank you!

  -Jeff

  Treat existing attributes that you got through query... () as readonly.

  For changes, use a command. See for example BuildApplyTextAttrCmd, Mike post.

  Dirk

• How to set the parameters of "Configuration ThinPro" via the HP Device Manager

  Hello

  Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from

  ThinPro Control Center-->

  Control Panel-->

  Setup-->

  Configuration ThinPro

  through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.

  I hope that I have forget something or you have another clue.

  Concerning

  Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.

  Concerning

• How to set the parameters of scanning on Officejet 6500 connected to a Mac?

  I'm trying to scan documents and pictures using the following:

  Scanner: HP Officejet 6500 E710n-z all-in-one
  Computer: Macbook Pro retina
  Operating system: OS X mount Lion
  Application: "HP Scan" (this application was provided by HP)

  Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

  I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

  Did anyone here know how to change these settings?

  Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

  HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

  Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

  HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

  If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

  To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

  When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

  Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

• How to set the parameters of release of flash 10.1

  Hello

  In the last Flash Professional CC, you can set the document to Flash 10.3 and more, but to download a Flash banner for advertisers, for example Google, it should be Flash 10.1 or lower.

  I see no possibility of downgrade my 10.1 file or lower.

  What should I do to fix this?

  Thanks in advance.

  GR, Marco

  Re: Flash Pro CC can publish for flash player 9?

• How to set the parameters of starting the server with WLST?

  I have scripts WLST create my WebLogic 10.0, managed servers, resources, etc. I want to add code to set the server start but I can't find the properties related to the launch of server as root, java House, arguments, classpath, etc..
  
  The relevant part of the script here I have at the moment is:
  
  def createManagedServer (d, noManagedServers, managed_server_port):
  Katia = DOMAINHOME + ' / ' + d
  readDomain (DOMAINHOME + "/" + d)
  x = 0
  While x < noManagedServers:
  MS = d + 'Man' + str(x+1)
  Create (ms, 'Server')
  CD ("servers /" + ms)
  LP = managed_server_port + (x * 10)
  Set ('ListenPort', LP)
  Set ('AutoRestart', 'true')
  Set ('AutoKillIfFailed', 'true')
  Set ('AutoRestart', 'true')
  Set ('IgnoreSessionsDuringShutdown', 'true')
  Set('GracefulShutdownTimeout',30)
  CD('/')
  x = x + 1
  updateDomain()
  closeDomain()

  Sorry, I forgot to say that we do in online mode.

  Online mode means that my server admin works and I've connected via connect() in my WLST, right?

  Yes, the server must be running.

• How to set the text to reveal and to scroll through the center of the screen?

  I need text "appear from nowhere" in the center of the screen, revealing a letter at a time as it scrolls by one-way or the other. NO scrolling on the screen.  I know how key framework to make the scroll, but do not know how to set up a mask (I guess) to hide the text until it moves beyond the Center. Please do not answer simply to use a mask, I get it!  I need to know how to implement that?  I can't find anywhere a tutorial that explains this.

  There are many ways to do it, one way:

  Set up and keyframe your type, and when you get to behave the way you want to, select the type of clip on the timeline and go to the menu Clip > nest.

  Click OK.

  Now, click the nested in the Assembly and in the effect controls panel, spin open opacity control and define a mask (it will probably interverti switched on) to hide the part of movable type you don't want.

  If you go back to the original item to make adjustments, double-click on the nested element.

  MtD

• How to set the number of unit and its maximum value in RDMS

  Hello

  I am trying to add RDM vsphere sdk using the code to return the controller below key and the unitNumber:

  public static int[] getFreeDevice (VirtualMachine vMachine, String deviceName) { }

  VirtualDevice [] vDevice = vMachine.getConfig () .getHardware () .getDevice ();

  System.out.println ("DPS->" + dps.length);

  int [retVal] = new int[2];

  for (VirtualDevice vd: vDevice) { }

  if (vd instanceof VirtualSCSIController) { }

  Vscsic = (VirtualSCSIController) vd VirtualSCSIController;

  retVal [0] = vscsic.getKey ();

  retVal [1] = vscsic.getDevice ().

  length +1 ;

  if (retVal [1] == 7)

  retVal [1] = retVal [1] + 1;

  return retVal;

  }

  }

  return null;

  }

  can someone tell me please:

  1 how to get units available, for example for example: 0-15

  2. how to get/set the limit (15)

  3. how to do ROW when the unitNumber reached 15

  4. how to ROW with the next value as SCSI1:0, after reached SCSI0:15

  Thanks in advance.

  Rohit

  Hello

  have you tried manually in your environment in order to add the new controller scsi as "scsi controller 1" for VM? First, try manually, then make sure that the scsi controller option is allow to add a scsi controller more for VM.

  And in your code

  scsiCtrl.setBusNumber (0); I think that the scsi controller 0 is already set. This is so it will be like this scsiCtrl.setBusNumber (1);

  scsiCtrl.setControllerKey (1000); This line will not come because after you add the scsi controller, it will generate key controller. It is not depends on user option

  Apart from that, I think that some description and label is not necessary.

  Thank you

• How to set the type of entry Action Message text programmatically.

  Hello
  
  I am trying to create an event of PPR on a Page Standard text Message entry.
  
  I'm extending the controller and try to define the Type of Action to firePartialAction and event to XXXX
  
  Is it possible to set these properties?
  
  
  Kind regards
  Krishna

  Re: Adding the new button in the seeded page
  Re: Adding a Message page Standard OTL box and turn the...

  Thank you
  -Anil
  http://oracleanil.blogspot.com

• How to set the parameters of the AKD with LABVIEW driver?

  Hello

  I am looking for a simple example to set or read the AKD with Labview driver settings.

  The AKD has ethernet communication and control is analog - AKD-P00306-NBAN-0000

  I want to use Labview to read the paramerters even as Kollmorgen WorkBench

  Thanks for your help

  Thank your for your help

  I found a solution with the TELNET Protocol

• How to set the parameters of the ipmi/ILO for feeding from a script management?

  I have an installation script entirely work for our guests esx4, the only thing missing is implemented ipmi/ILO settings.

  I searched and can't find answers for this, anyone know how to do it from a script?

  If it is ESX, so part of your kickstart could generate the thumbprint and download these results on a NFS server including vMA has access to perhaps a list of host names + digital fingerprint. You could write a small script which basically monitors a directory for updates and then automatically add to vCenter once the system is ready to go, you can probably do something similar with ESXi, but it will be more complicated that you have not a real way to "launch" the host. However, you can change the image and put your own scripts such as a python script to extract the footprint and again do the same thing by dumping at the exit of a volume shared including vMA has access to.

  If you are interested in editing script ESXi, take a look at 4 part of Maish's article on how you can configure the ESXi ping to a management host host - http://technodrone.blogspot.com/2010/04/esxi-deployment-solution-beginning.html

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Re: How to set the parameters of the screen?

  This computer screen is too bright. The manual is all in Chinese, which is not so useful for me. If anyone knows, please let me know.
  Thank you

  First of all, it would be interesting to know what model of laptop you have.

  Second, if you use the OS preinstalled Toshiba then the FN keys should work and so you can try the FN + F6 to decrease and FN + F7 to increase the brightness of the screen

• How to set the size of OpenFileDialog and make permanent

  Whenever I have use openfiledialog I need to resize again. Also when I select the 'details' mode it does not stick and I have to choose it again whenever I open it

  Hi EmadRamsey,
   
  When you select a particular display for files and folder, make sure that apply you the view to all folders.
   
  Follow this step to do the same thing:
   
  a. open the Explorer. The folder set to details.
  b. click on tools > Folder Options > (tab) display and select apply to all folders. Click OK.
   
  How to arrange files using folder views in Windows XP
   
  By default, Windows Explorer will remember the last window size before its closure.
   
  When you resize the box open the file, hold down the 'Ctrl' key, then exit the Explorer by clicking on the icon 'close' at the top right of the screen (not quit Explorer by clicking on exit on the file menu).
  Release the "Ctrl" key and then reopen the window and check.

• How to set the table rows spacing and line changing automatically if is limit

  Greetings,

  I use JDeveloper 11.1.2.4. By default, if you set (or not) the table width and the line is its width, it will create a scroll down bar.

  Is what I want to do, if the text inside each row its greatest width, to change the line inside his line. TO

  more to explain it, I'll demonstrate a small table below:

  MESSAGE ID

  1 Hello Philip

  2 Hello Philip

  3 How are yo

  u today?

  4 tries...

  This way, if the text in the column 'message' is the largest say width 40, to increase his height of line automatically if the text

  fits inside 1 row without creating a scroll bar.

  Thanks in advance for any help.

  Have you attempted to assign noWrap = "false" on af:column?

  Dario