QNetworkReply: uploadProgress ends almost immediately

Similar Questions

• Most recent game crashing almost immediately on the launch titles.

  Just got a new system.  The old songs that I installed (WoW and Crysis) work very well.

  Three new titles that I bought (Dragon Age, Just Cause 2, BF:Bad Co. 2) crash almost immediately on launch.  I'm afraid to buy new software that I'm afraid that they do not work on Windows 7!  A title closes just without any error message.  The other two titles give messages like this:

  Signature of the problem:
  Problem event name: APPCRASH
  Application name: DAOrigins.exe
  Application version: 1.3.11253.0
  Application timestamp: 4b7057ab
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  Fault Module Timestamp: 00000000
  Exception code: c0000005
  Exception offset: 6ad1c770
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789

  I can't tell you how much work I did try to correct these errors.  Ive contacted the manufacturer of the computer, game developers, posted on the Nvidia forums, followed on 1 billion troubleshooting suggestions, but no one seems to be able to precisely identify WHERE exactly the problem is, so I'm just shooting missles magic into the darkness.

  Currently the manufacturer of the computer (Digital Storm) is blaming Nvidia, Nvidia says it's the games themselves, the game developers are to blame the manufacturer of model and Microsoft, particularly of directx, but more important still, nobody works actively for a solution except me.  I made the mistake of throwing a lot of money to play the latest titles and cannot.  Any ideas or suggestions that are new, I'll try.

  The system is:

  Windows 7 64 bit

  Directx11 (downloaded library runtime dx and redist as suggested by others

  NVIDIA GTX 470.  I have tried both drivers latest drivers 197,75 and 257.15 beta.

  EVGA x 58 the with Intel i7 930

  memory of triple-channel 6 gb 1600 mhz (tested)

  Just Cause 2 has been downloaded from Steam, DA was downloaded from the EA store, BFBC2 is a dvd.

  Any help appreciated.  Thanks in advance

  Fixed, he appears in addition to the question of Dx11 at the beginning that it was also a synchronization problem in the CMOS.  A digital storm rep called and accompanied me through the evolution of the tensions, multipliers and speed clock and everything seems to work fine now.

  Thanks for the help and concern all.

• Screen disconnects almost immediately reconnects (electric disconnection) every time I am in full screen (watching a video, play a game, etc.)

  Hi, my monitor disconnects almost immediately reconnects (electric disconnection) every time I am in full screen (watching a video, playing a game, etc). This problem occurs randomly, and sometimes even too the point of disconnection every 5 seconds if I am in full screen, there are times when I'm not in full screen. However, the sound continues to play.

  I turned off the screen saver, changed the HDMI cables and the cables that connect the power on the monitor.

  My OS:

  Manufacturer: Lenovo

  Model: Lenovo Windows7 PC

  Processor: Intel Core i5-2320 CPU @ 3 .00GHz

  Installation of memory (RAM): 4.00 GB

  System type: 64 - bit Operating System

  Thanks in advance for your advice.

  Hi, thanks for you advise.

  I think I have found the cause of the problem, I tried to change my monitor one another, (from an old CPU), and it worked! Maybe it's just a faulty monitor that I guess and not a problem with the central unit. Thanks for your help!

• Adobe Audition CS5.5 is compatible with Windows 8.1?  Installation freezes almost immediately.

  Adobe Audition CS5.5 is compatible with Windows 8.1?  Installation freezes almost immediately.

  Hello

  Please pass by Adobe Creative Suite and Windows 8 "Caveat Lector .

  You can also read the FAQ | Adobe Creative Suite for compatibility queries.

  Kind regards

  Sheena

• Conversion of Linux P2V to ESXi with Vmware Converter 5.5 5.5 fails almost immediately on 1%

  Hello

  When you try to convert a physical Linux host on the Vmware ESXi 5.5 Server I get an error almost immediately after the beginning of the conversion, when trying to convert a physical machine to windows on the ESXi server there is no problem.

  Someone at - it ideas or suggestions?

  Here's the exact error:

  [task, 379] [task-12] - ERROR - convert: vmodl.fault.SystemError

  -> (vmodl.fault.SystemError) {}

  -> dynamicType = < unset >

  -> faultCause = (vmodl. NULL in MethodFault),

  -> reason = "DiskLib_Open failed on ha-nfcssl: / / [datastore1] plop / [email protected]:902! 52 ed 90 da 52 33 dc a5 - da 41 92 3 c 2d with error 22 b5 b7 one of the provided parameters is not valid. »,

  -> msg = ""

  ->}

  Thanks in advance

  Concerning

  This problem was solved when I used version 5.5.3 Vmware Vcenter Converter Standalone Client build-2183569

• ErrorString QNetworkReply "premature end of the document.

  Everyone knows about this problem?  The answer comes back correctly for smaller responses (i.e. https://developer.blackberry.com/cascades/files/documentation/images/model.xml), but for larger responses, the response contains data answer, but not all (and I get the errorString "Premature end of the document").  Here is an example URL for a greater response: https://api.twitter.com/1/statuses/user_timeline.json?include_entities=true&include_rts=true&screen _...

  The errorString seems to come from the QXmlStreamReader, but the fact remains that the QNetworkReply has an incomplete answer.

  I followed the tutorial of Communication HTTP almost exactly.  Here's a relevant code:

  main.cpp:

  void ApplicationUI::initiateRequest(QString username, QString password) {
      // Start the activity indicator
      mActivityIndicator->start();
  
      // Create and send the network request
      QNetworkRequest request = QNetworkRequest();
      QUrl url("https://api.twitter.com/1/statuses/user_timeline.json?include_entities=true&include_rts=true&screen_...");
      request.setUrl(url);
      mNetworkAccessManager->get(request);
  
  }
  

  void ApplicationUI::requestFinished(QNetworkReply* reply) {
  
      // Check the network reply for errors
      if (reply->error() == QNetworkReply::NoError) {
  
          qDebug() << "\n reply is: " << reply->readAll();
  
                  QXmlStreamReader xml;
  
                  QMLByteArray data = reply->readAll();                xml.addData(data);
  
                  while(!xml.atEnd() && !xml.hasError()) {                      // parse here                }
  
          /* Error handling. */
          if (xml.hasError()) {
              qDebug() << "\n errorString is: " << xml.errorString();
          }
  
          xml.clear();
  
          mActivityIndicator->stop();
  
      } else {
          qDebug() << "\n Problem with the network";
          qDebug() << "\n" << reply->errorString();
      }
  
  }
  

  applicationui. HPP:

  // Default empty project template
  #ifndef ApplicationUI_HPP_
  #define ApplicationUI_HPP_
  
  #include 
  
  using namespace bb::cascades;
  
  namespace bb { namespace cascades { class Application; }}
  
  /*!
   * @brief Application pane object
   *
   *Use this object to create and init app UI, to create context objects, to register the new meta types etc.
   */
  class ApplicationUI : public QObject
  {
      Q_OBJECT
  public:
      ApplicationUI(bb::cascades::Application *app);
  
      Q_INVOKABLE void login(QString username, QString password);
  
      /*!
       * Initiates the network request.
       */
      Q_INVOKABLE void initiateRequest(QString username, QString password);
  
      virtual ~ApplicationUI() {}
  
  private slots:
      /*!
       * Handles the network reply.
       */
      void requestFinished(QNetworkReply* reply);
  
  private:
      ActivityIndicator *mActivityIndicator;
      QNetworkAccessManager *mNetworkAccessManager;
  };
  
  #endif /* ApplicationUI_HPP_ */
  

  applicationui.cpp

  // Default empty project template
  #include "applicationui.hpp"
  
  #include 
  #include 
  #include 
  
  #include 
  
  using namespace bb::cascades;
  
  ApplicationUI::ApplicationUI(bb::cascades::Application *app)
  : QObject(app)
  {
  
      QmlDocument *qml = QmlDocument::create("asset:///main.qml").parent(this);
      qml->setContextProperty("app", this);
  
      AbstractPane *root = qml->createRootObject();
  
      mActivityIndicator = root->findChild("indicator");
  
      // Create a network access manager and connect a custom slot to its
      // finished signal
      mNetworkAccessManager = new QNetworkAccessManager(this);
  
      bool result = connect(mNetworkAccessManager,
              SIGNAL(finished(QNetworkReply*)),
              this, SLOT(requestFinished(QNetworkReply*)));
  
      Q_ASSERT(result);
      Q_UNUSED(result);
  
      app->setScene(root);
  }
  

  I'd appreciate any help!

  My apologies, looks like I posted a little prematurely on this one.  The answer came back in its entirety.  There were a couple of diversion that distracts me major problems:

  1. I was the XML parsing incorrectly
  2. It seems that if the answer is too long in the unit log, then the log of the unit will cut the message.  Is it possible to configure the log device is not for this?
  3. It seems that the response message has disappeared after using the following statement by qDebug().  This removes the data of 'response '?  I am a newbie in C++ from Java...

     qDebug() << "\n reply is: " << reply->readAll();
     

• eMac stops almost immediately when starting after replacing HARD drive

  Hey all!

  I need to explain a bit for this one, so please bear with me. Thank you.

  Long story short, I've had a few eMacs for quite a while now and I recently found a use for them. I created a (it is running 10.4 with 1 GB of RAM and a > G4 processor at 1 GHz, can't remember) and used it for a while before randomly power loss and refused to stay on for more than a few minutes. I tried to replace the PMU battery with one of the other Mac and pressing the reset button, which leads to stop showing signs of life whatsoever (even after the replacement of the original battery).

  Thinking I had it bricked, I got out one of the other Mac with a plan to give the disk of death. This new Mac running 10.5, perfect with another > G4 processor at 1 GHz (but only 768 MB of RAM this time). The only quirk I noticed is the TRC took abnormally long to warm up, black time with only red but gradually more luminous and no longer red colors of departure. It was about normal 5 minutes after that OSX end of initialization. In any case, I went to swap out hard drives and put everything to the top, to see that yet again, this new Mac does not work!

  If it has been awhile since the last attempt to start the CRT will do its usual "bong" noise before machine clicks (sorta like a relay of power off) and nothing else happens. If I try again, the CRT is silent (no doubt he is already warm from the last attempt to start?) and you can hear two clicks - one that looks like something to turn it on, then turn it off even on front. These clicks are different lengths apart - usually, this is only a few seconds, but sometimes longer. There was a few times where the fans have started between clicks and I've even heard the startup chime on an attempt (which got me excited - but no, it clicked and distributed repressed). The CRT does not seem to do anything other than bonging from time to time (but it can turn on - I can't say because of the problem of the warm-up that I mentioned earlier).

  I would really like to be able to resurrect this old Mac once again - I have the vague feeling that I broke it when replacing the HARD drive. I'm pretty sure that I have not forgotten all the internal cables, and I tried not to touch anything other than the HARD drive and the enclosure of the logic board (ended up having to remove the blower housing too, however). Two Macs are model A1002 and both have serial numbers in the YM412xxxxxx - YM520xxxxxx range (eligible for repair program?). I don't know if they were actually taken repair back in the day.

  In any case, I hope you guys can help out me! Thanks in advance!

  (P.S the first eMac is well beyond repair. I have also a third one - it is better to go by replacing the HARD drive again? It is worth noting that the PMU battery has been sitting on my desk for a while now. "It was probably flat anyway).

  The HARD drive would be the problem? It seems that it is.

  See if you can just unplug the data cable from HARD drive and try to hold down the alt or option to the startup/power.

• InDesign "Quit unexpectedly" almost immediately whenever I open it

  It wil for a few minutes sometimes work, it ALWAYS crashes when I open a particular file and Creative Cloud says that he is up to date. Help, please!

  See community Adobe: InDesign 6 crashes when you try to open a specific document. All others are open OK.  and run the script on the file that crashes.

  It crash when you do not open this file? If so, I suspect you may have a bad policy.

• Poor ESXi 4 NFS Datastore Performance with various NAS systems

  Hello!

  In testing, I found that I get between a half and a quarter of the e/s inside a guest performance when ESXi 4 systems connect to the using NFS data store if the clients connect to the exact same NFS share.  However, I don't see this effect if the data store using iSCSI or local storage.  This has been reproduced with different systems running ESXi 4 and NAS systems.

  My test is very simple.  I created naked CentOS 5.4 minimum installation (completely updated 07/04/2010) with VMware Tools loaded and the creation time of a file of 256 MB using jj.  I create the file on the root (a VMDK stored in different data warehouses) partition or a directory of the NAS mounted via NFS, directly in the comments

  My crucial test configuration consists of a single test PC (Intel 3.0 GHz Core 2 Duo E8400 CPU with a single Intel 82567LM-3 Gigabit NC and 4 GB RAM) running ESXi 4 connected to a printer HP Procurve 1810 - 24 G, which is connected to a VIA EPIA M700 NAS system running OpenFiler 2.3 with two 1.5 to 7200 tr / MIN SATA disks configured in front of software RAID 1 and dual Gigabit Ethernet NIC.  However, I have reproduced it with different ESXi PC and NAS systems.

  This is a release of one of the tests.  In this case, the VMDK is a store of data stored on the NAS via NFS:

  -

  ---

  root@iridium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 0,524939 seconds, 511 MB/s
  Real 0m38.660s
  user 0m0.000s
  sys 0m0.566s
  root@iridium /# mount/mnt 172.28.19.16:/mnt/InternalRAID1/shares/VirtualMachines
  root@iridium /# cd/mnt
  synchronization of the # mnt root@iridium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 8,69747 seconds, 30.9 MB/s
  Real 0m9.060s
  user 0m0.001s
  sys 0m0.659s
  mnt root@iridium#.

  -

  ---

  The first dd is a VMDK stored in a connected via NFS data store.  The dd ends almost immediately, but the synchronization takes nearly 40 seconds!  It's less than 7 MB per second transfer rate: very slow.  Then I get the exact same NFS share that ESXi is used to store data directly in the comments and repeat the DD.  As you can see, the SD is longer and the synchronization takes no real time (as befits a NFS share with active sync), and the whole process takes less than 10 seconds: this is four times faster!

  I don't see these results on data warehouses mounted via NFS.  For example, here is a test on the guest even running from a mounted via iSCSI data store (using the exact same SIN):

  -

  ---

  root@iridium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 1,6913 seconds, 159 MB/s
  Real 0m7.745s
  user 0m0.000s
  sys 0m1.043s

  
  root@iridium /# mount/mnt 172.28.19.16:/mnt/InternalRAID1/shares/VirtualMachines
  root@iridium /# cd/mnt
  synchronization of the # mnt root@iridium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 8,66534 seconds, 31.0 MB/s
  Real 0m9.081s
  user 0m0.001s
  sys 0m0.794s
  mnt root@iridium#.

  -

  ---

  And the same comments linking internal SATA drive of the PC ESXi:

  -

  ---

  root@iridium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 6,77451 seconds, 39.6 Mbps
  Real 0m7.631s
  user 0m0.002s
  sys 0m0.751s
  root@iridium /# mount/mnt 172.28.19.16:/mnt/InternalRAID1/shares/VirtualMachines
  root@iridium /# cd/mnt
  synchronization of the # mnt root@iridium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 8,90374 seconds, 30.1 MB/s
  Real 0m9.208s
  user 0m0.001s
  sys 0m0.329s
  mnt root@iridium#.

  -

  ---

  As you can see, the performance of NFS direct comments for each of the three are very consistent.  ISCSI and the performance of the store local data disk are both a bit better than that - as I expect.  But the mounted via NFS data store gets only a fraction of the perfomance of the any of them.  Obviously, something is wrong.

  I was able to reproduce this effect with an Iomega Ix4 - 200 d as well.  The difference is not as dramatic, butalways important and consistent.  Here is a test of a guest of CentOS using a VMDK stored in a data store provided by an Ix4 - 200 d via NFS:-.

  root@palladium /sync #; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 11,1253 seconds, 24.1 Mbps
  Real 0m18.350s
  user 0m0.006s
  sys 0m2.687s
  root@palladium /# mount/mnt 172.20.19.1:/nfs/VirtualMachines
  root@palladium /# cd/mnt
  synchronization of the # mnt root@Palladium; Sync; Sync; time {dd if = / dev/zero of = bs = 1 M count = test.txt 256 sync; sync; sync ;}}
  2560 records in
  2560 records out
  268435456 bytes (268 MB) copied, 9,91849 seconds, 27.1 MB/s
  Real 0m10.088s
  user 0m0.002s
  sys 0m2.147s root@palladium mnt-#.

  -

  ---

  Once more, the direct NFS mount gives very consistent results.  But using the diskette provided by ESXi on a mounted NFS datastore gives still worse results.  They are not as terrible as OpenFiler test results, but they are constantly between 60% and 100% longer.

  Why is this?  What I've read, NFS performace is supposed to be within a few percent of the iSCSI performance, and yet I see between 60% and 400% worse performance.  And this isn't a case of the SIN is not able to provide correct NFS performance.  When I connect to the NAS via NFS directly inside the guest, I see much better than when ESXi connects to the same NAS (the same proportion!) via NFS.

  The configuration of ESXi (network and network cards) is 100% stock.  There is no VLAN in place, etc., and ESXi system has only one

  Single Gigabit adapter.  It is certainly not optimal, but it doesn't seem to me to be able to explain why a virtualized guest is able to get a lot better performance NFS as ESXi itself to the same NAS.  After all, they both use the same exact suboptimal network configuration...

  Thank you very much for your help.  I would be grateful any idea or advice, you might be able to give me.

  Hi all

  It is very definitely a performance O_Sync problem. It is well known that NFS VMware shops still use O_Sync for writes little matter what share put for a default value. VMware uses a custom file locking system so you really can't compare it to a normal NFS share connection to a different NFS client.

  I have validated that the performance will be good if you have an SSD cache or storage target with enough reliable battery backup.

  http://blog.laspina.ca/ubiquitous/running-ZFS-over-NFS-as-a-VMware-store

  Kind regards

  Mike

  vExpert 2009

• USB hub on iMac end 2015

  I recently bought an iMac, retina 4K with 16 GB of RAM and 1 TB disc Fusion. It is currently running 10.11.4. I had previously used a beginning 2008 20 "iMac also runs 10.11.4.

  The old iMac has a motor attached Kensington 7-port hub which works fine on this machine. I had thought to transfer this hub to my new Mac - even if it's only USB 2 it would be great for my backup drives, printers and scanner.

  However, when I connect the hub to the new iMac, it is acknowledged and reset then almost immediately by the Mac that makes it completely useless. The hub always works on my old Mac as well as on my Macbook Pro (early 2011).

  Does anyone have a suggestion as to how I could make the hub work? You can also (since I'll get one the end anyway) is a seven hub USB 3 ports, which is known to work with this model of iMac, which does not cost the Earth and is available in the United Kingdom. I love the look and the price of the Orico hub and wonder if that market.

  I think the problem is that the USB 2 is not compatible, it must be USB3.

  However, read this Apple Knowledge Base article and see if it offers additional guidance.

  OS X El Capitan: If a USB device does not work

• Payment requested - I canceled almost a year

  I paid for 1 year of CC, canceled almost immediately to avoid automatic renewal.

  I just got an email from paypal asking payment for renewal. No money has left my account yet, but will end when Adobe confirms. Please stop/cancel before you withdraw the money.

  Cancel see answer #1 in https://forums.adobe.com/thread/2023066 - includes a link to Chat from Monday to Friday

• Will be the end of 2009 MacBook Support 8 GB (2x4GB) Ram?

  I just updated my MACBook late 2009 with 8 GB RAM (2 x 4 GB cards). The computer works fine and recognizes the upgrade. Should I worry that article states that the max memory is 4 GB?

  N ° Apple will not refresh their specifications max after their release.

  According to OWC, your Mac can take 8 GB very well.

  RAM problems would have shown almost immediately.

• My mail on the iPad Mini screen prevents timing and immediately goes back to the homepage

  Whenever I select mail mail page comes and then, almost immediately, return to the home screen

  on the mini

  Could be an application running that is causing a conflict with mail.

  Follow the instructions for the force to leave applications running here > force an app to close on your iPhone, iPad or iPod touch - Apple Support

  Then restart your iPad.

  1. Press and hold the sleep/wake button until the Red slider appears.
  2. Drag the slider to turn off your device completely off.
  3. Once the device turns off, press and hold the sleep/wake button again until you see the Apple logo.

  Then try to Mail.

• Stimulus profile stops logging immediately (custom steps)

  Greeting together again! I use the 2012 here all versions (VS TS, LV and tiara), and I also use for TS VS Custom steps. I have a TS main sequence that does all the work of configuration and custom installation via subsequences and steps VS. The only thing I use the profile of Stimulus for connects at this point, and for some reason any resultant TDMS file holds only six data points (record at 100 Hz). It seems that it starts and stops immediately, and I can't understand why.

  The only steps I have in the profile of stimulus steps Start Logging and group channels. There is no step, newspaper stop, so logging should not stop until the TS of the sequences of the project undeplous, as far as I understand it. Triggered trigger Condition logging is set to none, and file segmentation is set to do not Segment.

  Anyone can shed light on what is happening here?

  If I understand correctly, your profile of Stimulus stops almost immediately, because it is call a step to start recording. After that, the profile is done. Is this correct?

• Sync turns off immediately when I allow

  Because the upgrade file synchronization goes off almost immediately when I turn it on. Some synchronization happens - Typekit seems to work and a few backup files are on the list of the cloud. But whenever I run the CC file synchronization application is set to off. When I turn it on the light stays on but I get a notification (a fast ball) that sync is off. When the computer reboots, it is always disabled. I'm on Win7 and in the previous version, the automatic backup of cloud at first would always be reset OFF. I don't see a place to download a file, but I see that the files are generated by a number of error messages from the log. Here are some:

  20150703 - 000905.984: t = 3ae8: WARNING: GUDE: request failed. Error code: 29 errorMessage: timeout. Receive the response failed (TransferEngineImpl.cpp.jura::TransferEngineImpl:gudeLoggingHandler.611)

  20150703 - 000905.985: t = 3ae8: Info: [livetype] onError (id = longpoll) 29 ' Timeout. Answer failed '.

  20150703 - 000905.985: t = 3ae8: error: [livetype] longpoll: LTOnError failed to download the file of payments.

  20150703 - 000905.985: t = 3ae8: Info: [livetype] longpoll: listening immediately gave retry - after 60 seconds

  20150703 - 000905.985: t = 3ae8: Info: longpoll [livetype]: ask survey long sending to https://polka.Typekit.com/Subscribe?adobe_id=xxxxxxxxxxxx%40AdobeID & entitlement_state =

  20150703 - 000905.985: t = 3ae8: Info: [livetype] (id = longpoll) downloadToFile = > 161

  20150703 - 000905.989: t = 38 d 8: Info: [livetype] onAddParameters

  20150703 - 000905.989: t = 38 d 8: Info: [livetype] onSetTimeout

  20150703 - 000905.989: t = 38 d 8: Info: [livetype] longpoll: 1020 poll timeout parameter

  20150703 - 000905.999: t = 38 d 8: Info: [livetype] onAddHeaders (id = longpoll)

  20150703 - 002605.981: t = 5724: Info: [livetype] onResponseHeaders (id = longpoll)

  20150703 - 002605.983: t = 38 d 8: warning: GUDE: request failed. Error code: 504 errorMessage: HTTP 5xx (Server error) status. 504 GATEWAY_TIMEOUT. Initial request failed (no Retry attempted) (TransferEngineImpl.cpp.jura::TransferEngineImpl:gudeLoggingHandler.611)

  20150703 - 002605.983: t = 38 d 8: Info: longpoll [livetype]: request timed out on the catwalk (504). retries

  20150703 - 002605.984: t = 38 d 8: Info: [livetype] longpoll: listening immediately gave retry - after 60 seconds

  20150703 - 002605.984: t = 38 d 8: Info: longpoll [livetype]: ask survey long sending to https://polka.Typekit.com/Subscribe?adobe_id=xxxxxxxxxxxxxxx%40AdobeID & entitlement_state =

  20150703 - 002605.984: t = 38 d 8: Info: [livetype] (id = longpoll) downloadToFile = > 162

  20150703 - 002605.986: t = 32A 4: Info: [livetype] onAddParameters

  20150703 - 002605.987: t = 32A 4: Info: [livetype] onSetTimeout

  20150703 - 002605.987: t = 32A 4: Info: [livetype] longpoll: 1020 poll timeout parameter

  20150703 - 002605.997: t = 32A 4: Info: [livetype] onAddHeaders (id = longpoll)

  20150703 - 004305.907: t = 5fec: Info: [livetype] onResponseHeaders (id = longpoll)

  20150703 - 004305.909: t = 32A 4: WARNING: GUDE: request failed. Error code: 504 errorMessage: HTTP 5xx (Server error) status. 504 GATEWAY_TIMEOUT. Initial request has no (no Retry attempted)

  I replaced the adobe_id above with x - don't know if that would be readable

  Delete the CoreSync directory mentioned in the previous link and leave the CC app create a new. Works fine now.