Qosmio F10: after 2 days battery is empty

Similar Questions

• Qosmio F10: After Vista upgrade common module blocked due to incompatibility

  I was wondering if anyone has a solution for this. I have upgraded to Vista ultimate and have gotten most of the things to work but on each startup, he said that the common module driver from Toshiba has been blocked due to incompatibility.

  Most of the things work it just seems to be media and SD reader card buttons that have no card.
  All ideas welcome.

  Hello

  This message appears because you have updated the OS from XP to Vista and common modules installed are not compatible with the Vista operating system.

  Is Toshiba didn't publish the drivers and tools for this laptop and it's why some features don't work.

  That's why I don't recommend to UPDATE the XP to Vista, but to clean install Vista on the second partition.
  In this case, you will be able to use the two BONES. XP and Vista.

• Qosmio F10 grafic card GForce 5700 128 MB has been replaced the GForce 6600 128 Mb

  Is everyone has the same problem for Toshiba Qosmio F10 after video card replaced
  Lines on the screen or the computer does not start properly only fan works but not the Windows logo on the screen appears

  Hello

  This sounds not really well I put t know what that service facts guys
  Either it forgot to plug something or there is a power failure.
  I think you should communicate with the guys again to clear this ridiculous situation.

  I already answered your other post. There you should find the link to the ASP database

• Qosmio F10 lights After Hibernation

  My Qosmio F10 starts (after about 7 hours, without me touching any button) after putting in Hibernation mode during the night. The fact that for 4 days.
  Its quite annoying. Any ideas?

  Hello

  It's very strange question.
  Energy saver is responsible for the hibernation and standby.
  I recommend you to check the parameters. You can also try to change or reset the settings.
  In addition, you can try to reinstall the energy saver. Unfortunately, there is no general solution to this issue.
  Check it out.

• My Qosmio F10 died after the update of the Bios

  My Qosmio F10 died after update BIOS... it doesn't work anymore... I update the bios from 1.10 to 1.20
  the switch Led is still orange...

  What can I do to make it work again? or the version 1.10 back?

  Hello

  As much as I know you can't return it to the previous version. Try to remove the battery and wait for a short period.

  Do BIOS update as described in http://www.toshiba-tro.de/gcc/biosinfo/index.html?

• Qosmio F10: battery life

  I have a Qosmio F10 (2 months) and am pretty disappointed with the battery life.
  20 minutes running on battery at full power yesterday and the computer was turned off (3%)...
  Forget watching a DVD on the plane!
  I wonder if it is a BIOS issue or if there is no possibility to buy a more powerful battery.
  It seems to me that this computer was designed to run on a/c with the battery pack in as a secondary power (short!) option.
  Any comments?
  Also, did anyone tried these plane Chargers sold in airports?

  Hello

  In my opinion, you should try to set up your Qosmio for optimal battery usage. To optimize the battery DURATION use the Toshiba Power Saver utility. "TOSHIBA Power Saver" allows according to the specific use power management allows the reduction of the power consumption of your device and allows you to use your PC for a longer period when running on battery.

  You can reduce your energy consumption PC mainly for its use by reducing the brightness of the screen LCD or CPU processing speed. There are also various games of management settings power or 'profiles', prepared in advance. These profiles are designed to be used in some of the most common environments of the user. You can use these standard profiles or create your own profiles based on your own custom power management settings.

  I'm sure that all the settings of this can help you to use the device for a longer time. To watch DVDs using DVD player profile. You can change the profiles using the FN + F2 key combination.

• Fan noise after changing graphics - Qosmio F10-101

  Two months ago, I had my graphics from nvidia fx 5700 for nvidia geforce go 6600.
  Since my computer toshiba qosmio f10-101. After changing the old graphics card there is a fan noise that starts and stops every 2 minutes, it makes me crazy whenever I'm hear.

  Can someone tell me if this is normal and if they know if the specific card is noisy in any laptop? or if there are ways to remove this noise or to maximize the speed of the noise. ??

  Post edited by: marlena

  Hello Marlena

  The Qosmio forum, you can find some similar topics with some interesting comments. On the http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103

  Good bye

• Qosmio F10-101: after change of graphics output d-video card does not work

  Hello
  I had a problem with my qosmio F10 and after service, changed the graphics card from Nvidia Geforce 5700 6600. But when I tried to switch the LCD for the TV screen, I could not use my d-video out (SCART nb exit). I could not change display properties TV format because these settings the value NTSC and shadow. You have an idea? How can I solve this problem before the service...
  Thank you

  Hello

  The G10 has installed the utility of development of Toshiba and this tool has controlled the TV out put and the PAL, NTSC settings.
  Check if it is available on your Qosmio F10 and change the settings if necessary.

  Furthermore, it would not be a bad idea to access the BIOS and check if there are any options that can move from a PAL, NTSC

• Qosmio F10: new battery needed

  My name is Batool Mohdhir, I was wondering if you could help me with something, please. I have a toshiba Qosmio F10 and I need new batteries that my batteries are ruined for some reason any! the model # I found written on my battery Li-ion battery model is PA3285-2BRS. I found on several sites in the same farm, except that its 1BRS. I don't know what that means! It is suitable for my laptop or is it not? If not, where can I buy the model I need online? What websites is the best to buy online laptop parts? and also I need an adapter model PA-2521U-1ACA, but I could not find. What other adapters are suitable for the Qosmio F10? I'm looking forward to your hearing you soon.

  Hello

  At a first of all welcome to the Toshiba Support forum. I hope that you will find here information quite useful.

  Back to your question: I checked the Qosmio specification and there is that your device needs to follow the described parts:
  Power adapter - PA2521E-2ACA or PA2521U-2ACA (90W)
  Battery - PA3285U

  I put t know in which country you live but if there is no Toshiba service partner you can order directly by them. Another way to check if you can find some offereor online in your country where you can order the parts you need. I'm sure you can find some not Toshiba universal AC adapt, but I prefer the use of original parts.

  Bye and good luck!

• Satellite A100 battery is empty after 1 hour

  Hello

  I have a problem with my Satellite A100-720:

  When I change to normal energy saver, the battery is empty after almost an hour.
  Even if I change to long mode, the battery is empty after 1.5 hours.

  Anyone has the same problem?
  Is this normal or maybe my battery is damaged.

  Thanks for every answer you need

  (And sorry for my bad English)

  Hello

  No, I don't think that there is something wrong with the battery.
  The fact is that the battery performance is dependent on the use of the laptop and so you can get different results of time.

  You said you use the A100. Well, to my knowledge some A100 series laptops have been delivered with a standard battery of 2000mAh.
  If you want to use the laptop longer with the power of the battery I advise you to buy an extended battery packs.

  On the Toshiba Options & Accessories site you will find various supported batteries.
  Maybe you'll find a Li-ion, 6000mAh battery 9-cell or Li-ion 12 cells, 8600mAh

• Re: Blue screen after using the Qosmio F10 recovery CD

  Hello

  I tried to use the recovery CD (XP) for my fathers Qosmio F10. I chose option 1 to return to the factory default. It seems to work fine but after it's over he says remove the CD and reboot I did. It was then restarted but flashed a blue screen for a split second before restarting. I did not see what is the Blue error screen, as it flashes up too fast. Then, it takes me to the configuration screen and asks me to choose whether to start Windows normally or SafeMode etc. All options give me the same result.

  He said if I choose to boot to the last known good configuration:

  "windows was not start because the following file is missing or damaged:
  \WINDOWS\SYSTEM32\config\SYSTEM

  You can try to repair this file by starting windows setup using the CD-ROM Moose
  Select 'r' in the first screen to start repair. "

  Of course, I do not have an original Windows CD, I just the recovery CD.

  I checked to spit on the disc but its perfect.

  I have a complete backup of all of the HDD on an external USB disk if that would help?

  Don't know what to do next?

  So just in the summary;
  You have checked the RAM, HARD drive and tried to install the Windows operating system several times but without success

  Well, maybe you should try to boot from a Linux live disc to check if the BSOD appears again?  :|
  How about Windows XP installation by using the diskette in MS Windows.
  It s worth a try

  Last but not lease, you will need to replace the memory modules RAM and HARD drive
  I mean the different HARD disk and RAM tests are useful, but it will not replace tests using new parts
  I think that this should be done by a qualified technician because he could test it before buying spare parts

• Noisy fan - fan starts 15 minutes after turning on the Qosmio F10

  My Qosmio F10 has always had a very noisy fan. The fan noise starts always 15 minutes after turning the PC on and stays of less regardless of what I do on the PC - even if this happens be nothing else!

  I tried to change the battary cooling method optimized in the toshiba saving settings in an attempt to stop the fan coming on but any change of setting seems to have no effect on the fan. I did a search on these forums and found a link to the utility fan - but the link now appears to be dead and someone somewhere else also suggested update but tv pilots who did not work or the other. Anyone have any ideas on how to make this laptop less noisy?

  It's all a bit frustrating saw I bought it to listen to music - and all you hear is the fan when the music calms down!

  Thanks in advance

  Believe me that it is not unusual that the F10 is a laptop with a high GPU and CPU. These regions produce a lot of heat and it must be cooled!

  Please don t compare mobile portable fans with the Qosmio. The Qosmio laptop properties resemble a PC and in my view a desktop PC is much stronger than the F10

• Qosmio F10 recover after replacing the motherboard

  Hello

  I'm having a problem with my Qosmio F10 recovery. It won't boot from the CD, I get a message "media test check the cable failure".
  I tried everything I could find here on this issue without any results. Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is excatly the case.

  I got a new motherboard and CD/DVD player put some time ago.
  How can I make it work again?

  A.

  > Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is exactly the case.

  Who replaced the motherboard? THE ASP?

  Well, usually the recovery CD should work after the replacement of the motherboard.
  I presume that the parts have been replaced with exactly the same parts and so it should t be a conflict between the recovery and the new motherboard CD.

  Have you tried to boot from another bootable Win XP or Linux CD? Check it!

• Satellite C660 - battery is completely discharged after three days

  I c660-1te and the battery is completely discharged after three days when Notepad in * power off (NOT in standby or Hibernate) * State. I can't find any option "usb charge" in a bios to turn it off. Wake on LAN (WOL) feature is disable.

  I do not understand why battery life is so short?
  How can I control to turn off all devices on my laptop?

  Hello

  The WOL option should be disabled in Device Manager-> LAN card-> properties-> Advanced tab

  USB sleep and charge are in the utility of Toshiba HWSetup.
  Check all programs > Toshiba

  But it is available only if the laptop would support this function.

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.