My Qosmio F10 died after the update of the Bios

Similar Questions

• Satellite A500-136 died after the BIOS update.

  Hello friends...

  Today, I tried new BIOS flash, but in 21 of the 37 it stuck.
  I waited for an hour, but nothink, just stuck.
  No one key is active.

  Then I removed my batery and tried to turn on the computer and the screen is black.
  Nothink else does not appear here. I think the bios is dead...

  WHAT I have TO do, I don't want to get to the guarantee, because I need to wait a month, only then my computer will be fixed.

  Please help please please... :(

  SORRY FOR MY POOR EANGLISH

  Hello

  It s a shame hear that mate!
  It seems that something was wrong during the update of the BIOS, and so the laptop won't turn on.
  I'm afraid that you can't do anything else as to contact the local ASP m!

  The local ASP technician must check the device and possibly it might update the BIOS using a special BIOS and the special procedure.

  Good luck buddy

• Qosmio F10-101: after change of graphics output d-video card does not work

  Hello
  I had a problem with my qosmio F10 and after service, changed the graphics card from Nvidia Geforce 5700 6600. But when I tried to switch the LCD for the TV screen, I could not use my d-video out (SCART nb exit). I could not change display properties TV format because these settings the value NTSC and shadow. You have an idea? How can I solve this problem before the service...
  Thank you

  Hello

  The G10 has installed the utility of development of Toshiba and this tool has controlled the TV out put and the PAL, NTSC settings.
  Check if it is available on your Qosmio F10 and change the settings if necessary.

  Furthermore, it would not be a bad idea to access the BIOS and check if there are any options that can move from a PAL, NTSC

• Qosmio F10 lights After Hibernation

  My Qosmio F10 starts (after about 7 hours, without me touching any button) after putting in Hibernation mode during the night. The fact that for 4 days.
  Its quite annoying. Any ideas?

  Hello

  It's very strange question.
  Energy saver is responsible for the hibernation and standby.
  I recommend you to check the parameters. You can also try to change or reset the settings.
  In addition, you can try to reinstall the energy saver. Unfortunately, there is no general solution to this issue.
  Check it out.

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

  Hello!

  Before I have a little problem with my fan, but I do it with the BIOS update. His work!

  Now, I have a little problem of different...
  I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

  Its make me crazy...

  Hello

  Seems the CPU and GPU don t run full implementation after the BIOS update.
  Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

  Check to see if you can change an option is the BIOS.
  You can also try to update a graphics driver and could control Windows 7 power management.
  Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

  I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
  Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

  I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

  Any help will be appreciated. I really need help.
  Thank you.

  Well, try this:

  1. If the power is off.
  2. Start the laptop and keep press F8
  3. then select restore.

  And? :)

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye

• NB200 does not start after the bios - screen black screen with blinking cursor

  Hello

  I was using the laptop as usual when I think there may have been a virus activity - reason I say that is that my anti-virus closed unexpectedly. I couldn't restart programs files.

  I restarted the laptop.

  After the bios menu will I get a blank screen with a blinking cursor - windows does not start.

  I did the following:
  (1) create a USB bootable with Recovery Console window XP - boot with this i can see three drives C:, D: as SDA? I can see the content of these disks, so it seems that my HD works. I ran a fixmbr and fixboot, but this has not solved the problem.
  (2) create a Kaspersky bootable USB virus scan - ran it without problem - he found a few question (not on the disk boot sector) I've fixed.

  An option was to copy files from the laptop and then start it in recovery mode - so Itried to run the phone into recovery mode hold down the 0 key at startup - the bottom of the screen then displays * HDD Recovery mode * and nothing happens.

  Any help - other options would be greatly appreciated.

  My 1 year of that guarantee has expired a few months back so can't send in for repair.

  Thank you

  Hello

  I doubt that it is a virus.
  Seems the file system is damaged on the HARD drive and this is the reason why the laptop does not start until it could also be a partition of HARD disk malfunction.

  Try this; Turn on the unit, press F8, and then check if you have the laptop repair.
  If this is not possible, then you will need to reinstall new OS.

  Here you can order a recovery disc:
  http://backupmedia.Toshiba.EU/landing.aspx
  Of course you will need an external USB CD/DVD drive

• Re: Satellite Pro A200 - black screen after the BIOS screen

  Hello
  I'm new to the forum and have a big problem. So, any help is welcome and appreciated.

  My Satellite Pro A200 turns black after the BIOS screen and a black screen with a blinking cursor. Also just as the screen goes black a beep can be heard which shows windows boot.
  I can access the toshiba Setup screen but not the installation of security mode.

  Kind regards

  Hello

  You wrote that you can access the BIOS, but have you checked if the HARD drive is recognized properly? Perhaps because the computer cannot start HDD isn't recognized then you should check this.

  If the HARD drive is recognized, I would try a Toshiba Recovery disk recovery facility. It seems that Windows isn't able to start and if you reinstall the whole system should help get rid me of this. Go to the start menu and select the CD/DVD drive as a boot device.

  Check this box!

• Qosmio F10 recover after replacing the motherboard

  Hello

  I'm having a problem with my Qosmio F10 recovery. It won't boot from the CD, I get a message "media test check the cable failure".
  I tried everything I could find here on this issue without any results. Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is excatly the case.

  I got a new motherboard and CD/DVD player put some time ago.
  How can I make it work again?

  A.

  > Then I read somewhere on this forum that this recovery cd would not work if the laptop has been repaired and has a new motherboard. This is exactly the case.

  Who replaced the motherboard? THE ASP?

  Well, usually the recovery CD should work after the replacement of the motherboard.
  I presume that the parts have been replaced with exactly the same parts and so it should t be a conflict between the recovery and the new motherboard CD.

  Have you tried to boot from another bootable Win XP or Linux CD? Check it!

• Qosmio F10 main board replacement - update of the BIOS etc.

  Hello

  I just installed a new motherboard on my F10-124.
  He was the P000415760 of PCB (part number P000454980) upgrade as the graphics card does not - again!

  Documents accompanying tell me to update the Bios, EC/KBC (parameters please) and write the new DMI. At the time where the VGA controller is not recognized, and no reader CD is listed.

  Can it be updated by myself, without having to refer to an ASP, as it is not worth the money if I do. I want to just use this as an additonal PC for my daughter.

  No doubt I should be able to update the Bios from a download or something from the toshiba support site.

  Any help appreciated.

  I found a utility to Update DMI PC Toshiba laptop Toshiba U.S. page.
  You can try this
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/downloadDetail.jsp?soID=1008299&PF=true
  But generally, this should be done by a Toshiba ASP so if the utility would not help you, you will need the assistance of a Toshiba ASP.

• Helix died on me, does not start after the BIOS update

  I just did an update of the BIOS the other day. No idea what version it is. When I started it it said "error detection on the HARD drive...". ». I have since reset the BIOS by default options, and now it starts with a splash BACK-like screen that shows the disk ATA HDD0. But selecting and pressing on enter flashes just the screen and nothing happens.

  When I attach a USB with Linux, it appears in options on the BACK-like boot screen, but the selection does not to start.

  The laptop is now completely uselss and I lose the days of time and this is a major problem. What should do?

  Hello. Assuming that you have not clean installed a new operating system, and you have the

  Win8 original installation on your propeller.

  Enter the BIOS Setup by pressing F1 when the Lenovo logo appears.

  Go to Security - Secure Boot and set it to off if you want to start any OS other than Win8.

  If you are happy with just the Windows 8 running on it, then I recommend Secure Boot for the value IT.

  Go to start - Boot - and on top must be Windows Boot Manager.

  With Secure Boot set on, Boot to the UEFI/Legacy is grayed out and set to UEFI.

  With Secure Boot set to off, and you want to boot other operating systems, like Linux, it must be set to both.

  Check these settings and see if your computer boots.