Qosmio G30-162 - how to handle the dead battery?
I use my Qosmio G30 plugged into the mains. The battery is exhausted, and so I lost the use of the computer. What I need to replace the battery, or is there any method of conversion of the PC for network use only? All advice appreciated... Senior user.
Hello
No, in this case, you can repair the battery t and you need a spare battery because the battery is not repairable.
> or is there any method of conversion of the PC for network use only?
Hmm I put t know what you mean, but you don't need a battery. Alternatively, you can use the laptop with AC/DC adapter only. That s no problem. :)
Tags: Toshiba
Similar Questions
-
Qosmio G30-126 - how to access the bios!
I have a laptop Qosmio G30-126 and I don't know the key to enter the bios to change real estate for the HARD drive or something... then how to access the bios? What is the key for the bios?
Hello
Try pressing the F2 key by turning on the device.
The Toshiba notebooks supported the ESC and then F1 button
If these two options are possible -
Qosmio G30-204 - how to replace the screen?
Hi people. I have a Qosmio G30-204.
The screen to the right corner is not sure as the rest of the 3 corners of the screen.
How can I tighten again?Where are the screws on the screen?
Hello
Have you tested the laptop to an external monitor? Perhaps it is not a problem with the monitor and your graphics card or card mother is causing this issue.
Check it!Moreover I replaced didn't a computer laptop screen myself again because it s too difficult and delicate in my opinion. You need to remove a large number of screws and you should be very careful that you n t destroy a part or material of the laptop.
I think the best way is to contact a local laptop technician you. They can try to help you and they have enough experience for the exchange of material on a laptop computer.
Good bye
-
Qosmio G30-163: how to change the settings for the keyboard in the UK
Hi, I bought a Toshiba UK G30-162 and it does not have a Uk keyboard (directed by Vista), main caps do not correspond to the key. That is to say an umlaut = ', + =-.
It took me a long time after that.
Hello
What type of keyboard you have now? And how to think that Don t you have a UK keyboard?
Is a sign of (euro) on your "E"? If so then you probably have a German or a keyboard of france. If this isn't the case, then you have an American or a UK keyboard.
Just look at your settings in your systemproperties.
Welcome them
-
Qosmio G30-137: how to change the English language OS?
Hello!
I just bought Qosmio G30-137 of the Germany and he has Windows Xp MCE in German language.
The recovery disk is also in German also. I would like to know if someone can provide me with the recovery in the English language disc or can someone tell me step by step what I need to do to make a format for install Windows Xp MCE version in English and what programms I probably need because I'm a newbie...The laptop has also two HARD drives with RAID technology.
I can't wait to hear promptly.Hello
Windows was delivered in German language, because you bought in Germany. You cannot change the language to English without the recovery or the original version of the Windows operating system English English CD.
You can install the original Windows operating system but before you install the new OS you need to install the RAID driver.
Check out this FAQ from Toshiba document:
http://support.toshiba-tro.de/KB0/TSB56012H0001R01.htmSee also the similar topics:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8076&MessageID=30452#30452
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=4603&MessageID=15170#15170 -
Qosmio G30-162 - BIOS update problem
Hi, I have a problem with the update the BIOS on a Qosmio G30-162, which seems to be running the following version: -.
Version 1.20
Version 2.3 of DMI
Date of the BIOS 21/01/06Whenever I run the update V3.90 it is said that it is not valid for this machine.
Anyone know how to fix this?
Thank you very much
The BIOS update I'm running is V3.2.9 (P0038v390.exe)
When I run the files of the update says that "this computer is not supported.
Thank you very much
Hello
Do you have what Windows OS installed?
If you have installed Win XP then the common Module must be installed before trying to update the BIOS.
If Vista is installed, the VAP (value added package) must be running. -
Difference between Qosmio G30 - 162 and G30-116
Hello
What is the difference between these two machines, with the denomination of sale, they have the same sound
Hello
Check out these pages and compare these two units
Qosmio G30-162:
http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=UK&PRODUCT_ID= 116151 & DISC_MODEL = 0 & toshibaShop = falseQosmio G30-116:
HTTP://EU.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=EU&PRODUCT_ID= 114051 & DISC_MODEL = 0 -
Cannot update BIOS for my Qosmio G30 - 162
I have Toshiba Qosmio g30-162 and I have graphics problem.
I tried a lot of things.
I found on the internet about repair program. I wanted to update my BIOS, but I can't.
I downloaded the BIOS ver 3.90 from Toshiba Web site and when I try to update me of issue of Win XP system (this computer is not supported)
I have what I download the correct version of BIOS for my laptop and also I try most version for G30 Toshiba Web m.Please help me
What you mean with graphic problem?
I need a little more information to help you.Graphics driver?
Older version of BIOS?
Detailed description of the error?If you try to update your BIOS, you should extract all the files in the zip file.
-
Re: Qosmio G30-162 - updated graphics card
However, I have a Toshiba Qosmio G30-162, which until now has served me fine - games is becoming more advanced and requires more vram.
My machine came with a GeForce 7600 256 MB has told me that the technician "is integrated with the Commission. Now buying a new pc isn't an option.
It is therefore possible to update this machine graphics card or increase the amount of ram that the current map (I'm no stranger, with the help of a soldering iron)I would like to hear from someone who has experienced similar problems and found a solution.
Any help appreciated thanksYou will meet many people who has the same attention but I can tell you that this is not possible.
GPU is mainly set at the Board of Directors and cannot be upgraded.
And this isn't only a deal with Toshiba laptops, but it is usually not possible on all laptops from different manufacturers.Welcome them
-
How to fill the discharge battery on Qosmo G30?
Hello
How to fill the discharge battery on Qosmo G30?
Thank you
Hello
Disconnect the power adapter and run the notebook until it automatically stops.
In addition, you should disable or change the battery alert in Windows power management. -
How to handle the onTriggered many ActionItem created dynamically
Hi, I created the ActionItem dynamically using (loop)
because data is from webservice
How to handle the onTrigerred?
If my code is like this:
for (int i = 0; i)< alist.count();="">
{
My page page * = iRoot-->
findChild ("SpecificObject");
ActionItem * action = ActionItem::create () .title (aList [i] .name);bool res = QObject::connect (action, SIGNAL (triggered ()), this, SLOT (handleAction (())); what I'm confused because I don't know what action is triggered
Q_ASSERT (res);
Q_UNUSED (res);my page-> addAction (action, ActionBarPlacement:efault);
}
MyClass::handleAction() Sub
{
aFunction(); This parameter of function required of aList, said user.user aList [i]
}
Do I need to create handleAction() as well as added actionItem SLOT
But I don't know how much action added because it is dynamic server
Thank you
There are a few options:
Create a single location and connect all the signals. You can then call sender() into the slot to retrieve the object that sent the signal and go from there. You can also use a QSignalMap that maps each signal to a value and send this value to a single location. You can also use QSignalMap::sender() to get the sender object.
I used the QSignalMap to do something similar for handling created dynamically successfully drop-down lists.
-
How to handle the case of zero insert line?
11.2.0.2, I want to insert into a table and you want to handle the case where the zero line is inserted. I use the following code and hope an exception is caught and let me have the chance to do something
The block runs OK, but not seen release. How to handle the case of insertion of line 0?set serveroutput on begin insert into his2051 select * from his2051 where today not in ( select distinct today from his2051 ); EXCEPTION WHEN NO_DATA_FOUND THEN DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND exception ' ); WHEN OTHERS THEN DBMS_OUTPUT.PUT_LINE('OTHERS exception ' ); end;
This will do what you want:
set serveroutput on begin insert into his2051 select * from his2051 where today not in ( select distinct today from his2051 ); if SQL%ROWCOUNT = 0 THEN DBMS_OUTPUT.PUT_LINE('%rowcount must be [' || SQL%ROWCOUNT || '].' ); DBMS_OUTPUT.PUT_LINE('NO_DATA_FOUND - but won't cause an exception ' ); END IF; EXCEPTION WHEN OTHERS THEN DBMS_OUTPUT.PUT_LINE('OTHERS exception ' ); end;
-
Qosmio G30-161: how to install XP or where to find the restore CD?
In my other post (http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=29959&tstart=0) I asked if anyone had a solution to my problem, I thought at that time was RAID configuration. It turns out that it is my CD is corrupt.
So now I need a new Qosmio G30 - 161 XP MCE install CD. Now, I've heard that there are a few programs, Fx. nLite, which can put drivers into XP installation. Is this true? I have a Win XP Prof instal cd.
So here is my final questions (prioritized :))):
1. How can I make my own CD for Win Xp MCE or Pro install?
2. what drivers need to be included in the cd?
3 should. what program I use?
______________________________________________4. If it is not possible for me to create my own CD, where can I buy one that works with my Qosmio G30 - 161?
A response is much appreciated and wanted :) Please help me out here. I thank very you much in advance!
Hello
Yes, you can use the freeware software nLite to build your own windows CD and include the various drivers.
With regard to the point:
(1) I think you should google for nLite, because much useful documentation and instruction how to use the program nLite.
(2) If your laptop supports the RAID drive I would recommend including only the RAID driver. Other drivers, you can install after the installation of Windows operating system
(3) nLite is ok
(4) you can order the new collection of EPA, which is responsible for your country.Best regards
-
Qosmio G30-116: how to connect to the Sky Digital box to watch TV?
I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop
* note: I do not use TNT or TV I'm on SKY DIGITAL *.
SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.
Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?Hi Liam
AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.
You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.
The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.
Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.
-
Qosmio G30-126: how simultaneously connect analog TV and TV satellite
Hi, I have a Qosmio G30-126 and you have a problem with receiving simultaneous TV analog (by TV-in the port of integrated TV tuner) and satellite satellite set - top box (by AV-in ports).
I can't program Windows Media Center for analog TV (but not satellite STB) per port, TV antenna and it works perfectly.
I can't program Windows Media Center for digital satellite STB (but no TV analog) channels by AV-in port and it works perfectly.
But I can't program Windows Media Center for the two TV analog I satellite STB, because during programming WMC forces me to choose between analog satellite or cable or SATELLITE box and does not allow me to choose two signal sources.For me, it's a big problem, because I have cable (analog) TV and satellite STB with digital channels. And I want to watch all the channels on my Qosmio.
Could someone help me?>... because during the WMC program forces me to choose between analog satellite or cable or SATELLITE box and does not allow me to choose two signal sources.
I think that in this statement you answered your question. I got Qosmio G30 a long time ago, and I also know that WMC can't handle with two sources of signals at the same time.
To confirm that contact Microsoft and ask them. I mean that they have designed WMC and know how it works exactly.Toshiba has to provide suitable equipment (TV tuner) to provide the TV option on this laptop.
Maybe you are looking for
-
Hello and Hello I have a PC while HP is since I install my touchscreen 8.1 Windows does notand I can't find the driver touchsmart It is for this reason that I appealed to you to help me because I'm not even the only this brand PC with this PROBLEM AN
-
Good day to all. I tried several ways to start my server with interfaces in mode RAID/AHCI SATA only on Windows XP 64-bit OS. I get the BSOD crash with error 7 b every time. Here is what I tried: 1 ignore checking the AHCI with Windows Setup and pre
-
message: not found boot device - install the operating system on your hard drive
In July, I bought a HP Envy for my child to take at the College. She started using it the last week of August and two days ago, it "crashed", according to the technical support at school. The serial number is {removed privacy} - the product number i
-
Hello I have a QNAP NAS with multiple network shares, I want to add to the index. Under control panel > Indexing Options, the NAS and the mapped drives are not listed, but a response here indicates that this may be due to a problem of law access on t
-
How to get SQL Developer 4.1 to display the query result?
SQL DEV 4.0.3.16.84 execution of a SELECT statement is stored in a .sql file causes the window of the query result of pop-up indicating the result of a SELECT statement. SQL DEV 4.1 is not to do so.