Difference between Qosmio G30 - 162 and G30-116

Similar Questions

• Qosmio G30-116: how to connect to the Sky Digital box to watch TV?

  I recently bought the Qosmio G30-116, with the understanding that I can connect my digital Sky to the laptop (somehow) and watch and record the sky on the laptop

  * note: I do not use TNT or TV I'm on SKY DIGITAL *.
  SINA the converter cable provided to connect the video in on the laptop (video is like a headfone Jack and converter converts to this female RCA/RCA)

  I connected on the laptop and then connect a RCA 3 SCART toward it then in the area of the sky, when you set up the TV section in Windows Media Center, I followed the instructions until it gets to the point where it scans a signal, (before that I wonder what kind of signal that I receive, I select digital but have tried all combinations in) but it does not find a signal.

  Now I was told that Windows Media Center doesn't support analog input and the connection between the sky and the laptop is analog.
  Is this correct or not? then, while typing this I learned by someone else that my laptop is not capable of receiveing SKY DIGITAl as it cannot decode or something. Is that also correct? If not, can what am I doing wrong, and someone help me to get it going? And I go about it the right way or I'm quite the wrong way if the laptop is capable of it?

  Hi Liam

  AFAIK if you are using an external receiver (sat receiver or even sky digital box) the laptop can bring out just what external device send to the laptop. You can connect your external case to the laptop using composite to the port (transfer of video and audio signals). After that, you can start Qosmioplayer and analyze the available channels.

  You will find a program, but the different channels, you must select the box itself. If a channel must be registered, use Qosmioplayer save option.

  The same must be possible with WMCE. I'm not 100% sure but I also think that the connection between laptop and Skype is analog.

  Sorry, but that's all I know about Qosmio. I tested it with Qosmio G20.

• Qosmio G30-116: TV button - where is it?

  Hello everyone.
  I would like to ask questions about the (Tv) button in the qosmio G30-116. Do not I have it on my blue (AV) button on the keyboard.
  I tried to play station 2 on the G30-116 but it doesn't work unless through media center which is really slow and bad.

  My friend has a G20, he bought from the United States, and it has a button "Tv in" and when it connects (play station2) through D-video or video, simply press that button, then there a live inistent Tv that is faster than the media library.
  As far as I know because in media center, the game will be very slow?

  G30 suppouse to be better than the G20. Why there is no Tv-in button? Where we can press on and play or watch the sky or anything like that, speed of the media center boring?

  Why should I use media center to play (play station) while G20 users WHOSE!
  I contacted toshiba and they said your are going to ring me tomorrow or the day after, but if I found that this Tv-in support dosen't G30 series!

  Could someone correct me if I'm wrong please, this question is open for all the qosmio but especially for those with the G30.

  Thanks to you all
  Naïve

  Hello

  I think you're wrong.
  I put t found information about the Qosmio G30-116, but on the Qosmio G30-134.
  But I guess that these two units are similar.
  Check your user manual that was preinstalled on your laptop.

  However, the Qosmio supports the monitor button. This is the second on the right.
  The Qosmio player should start. There, you can choose between TV mode, CD or DVD. I think you need the TV mode.
  You should also check your right connection. I suppose that you use the right cable and the composite port (monitor of).

• Upgrade to Vista Edition Home Premium on Qosmio G30-116

  I thought I had covered until after I started the upgrade of power. To see that there are still several drivers who did not prpoerly including the video card.

  Also the test under icons was blurred. I tried several different approaches with clear Type etc. and increasin size but not luck.

  1. What is the best advice for the upgrade? is it still worth in waiting for toshiba to produce a package
  2. What are the recommendations for the establishment of siplays of Vista?

  Hello

  First of all you need to know what are the right drivers for you unit.
  It seems that the Qosmio G30-116 is a part of the PQG30E series. So if you're going to download all of the drivers that you must choose that number in the download form pilot!

  I checked the Toshiba page and unfortunately, I didn't find that several drivers for Vista as RAID driver or stack of BT.

  However, it seems that you must update the BIOS before installing Vista.

  But now for you questions:

  > 1. What is the best advice for the upgrade? is it still worth in waiting for Toshiba to produce a package
  Well, I would recommend install clean Vista separately on a second partition.
  And Yes, if you want to use the whole functions to wait for Vista drivers

  > 2. What are the recommendations for configuring Vista displays?
  After the version of the graphics driver you should simply install it. The driver will choose the best settings.

• InterVideo WinDVR 3 on Qosmio G30-116 via port-> no audio video

  Hello

  I installed Intervideo WinDVR 3 on my Qosmio G30-116. I have connected a decoder for the Qosmio via the video Port for using the cable supplied Toshiba which provides a composite video cable audio two channels to affix the Qosmio. The video works fine but not the audio.

  Intervideo WinDVR 3 "Setup" see section when you select the "Device" tab on the video input is set to "Toshiba PCI DVB - T Tuner hybrid analogue" and hense video works. However, the only options under Audio input are the "SigmaTel Audio" and "Logitech microphone. I put it on "SigmaTel Audio" and under this setting, the only option for source is the 'CD drive '. These are therefore the setting but still no sound from my cable box.

  Any ideas?

  Any other proucts that someone knows of which allow you to use the video in Port of the Qosmio that work really (FYI I can't even make it work with Windows preinstalled Media Center.

  Concerning
  Stephen

  Hello

  Have you tried to use the Qosmio Player or MCE instead of the WinDVR 3?

  How to connect two devices?

  Insert the plug of the output cable to connect to the box set-top to the audio input jacks (Red: audio right, white: left audio) and video input (yellow) of the software component video cable plug-in connector.
  The video port allows you to import video data from analog video cameras or video recorders. To hear the sounds to use the video cable to connect the audio terminals of the device and your computer (Red: its channel right, white: his left channel)

  In the user manual, you will find the detailed how connect the set - top box for the Qosmio and what cables are required.

• What is the difference between the Service Station and Tempro?

  Searched for information on this, but have not been able to find:

  What is the difference between the Service Station and Tempro?

  I just run the wizard upgrade Toshiba and it installed the gas station but Tempro is already installed and seems to do the same.

  Concerning

  Bushy

  Hello

  These two tools are Toshiba one informs you of the new driver updates available on the Toshiba driver page.

  AFAIK Tempro is slightly older than the gas station.
  In addition the gas station seems to provide a bit more options and features like tool Tempro.
  However, I recommend using one my favorite utility's Service Station

• What is the difference between Ubuntu desktop edition and server edition?

  What is the difference between ubuntu desktop edition and server edition?

  Desktop Gets the window manager and terminal server :)

• Difference between Satellite Pro L300 and Pro A300

  Can someone please tell me the difference between Pro A300-21F and Pro L300-1RS as specifications on Tosh pages seem to be identical.

  Like us all, I'm looking for the more powerful machine at the lowest cost. TKS

  _Satellite pro A300-21F: _
  -Intel (r) Pentium (r) Dual Core processor T3400
  -SATA 160 GB (5400 RPM)
  -Chip graphics Mobile INTEL GL40
  -2 GB DDR2 (800 MHZ)
  -No Bluetooth
  -No fingerprint sensor

  _Satellite pro L300-1RS_
  -Intel (r) Pentium (r) Dual Core T3200 or Intel (r) Pentium (r) Dual Core processor T3400
  -SATA 160 GB (5400 RPM)
  -Chip graphics Mobile INTEL GL40
  -No Bluetooth
  -No fingerprint sensor
  -TV out (composite) or RGB external monitor available routes

  You are right, the two models of notebooks seems to be very similar and supports virtually the same devices.

  Good bye

• Re: Difference between Satellite L750-10F and Satellite L750-12 q

  What is the difference between the L750-10F and L750-12 q.

  Thank you.

  L750-12 q a 500 GB HDD and L750-10F has 750 GB of HARD drive.
  L750-12 q has USB 3.0 and USB 2.0 L750-10F.
  L750-12 q has REALTEK 802.11 (B/G/N) 13CH-RTL8188CE MOW - HMC and L750-10F has ATHEROS 802.11(B/G/N) V3.0 WB195-HMC w / BT + HS inside.
  L750-12 q is available in Poland and L750-10F in Germany.

  I found these differences. I hope I could help a little.

  Good bye

• What is the difference between the HX - 90v and HX - 80 coming cameras?

  What is the difference between the HX - 90v and HX - 80 coming cameras?

  Thank you!

  I'd say it's supposed to be a fill, a little brother to the HX90v

  It removes the control ring and the GPS, and I think the rest is the same.

  It is for those who want the HX90v but the price is a bit steep for the compact range, and they need not necessarily GPS or the ring of command, just a camera that works.
  This kind of thing, at least to my knowledge.

• Difference between the cDAQ-9174 and cDAQ-9178

  I have several cRIO-9081.  Each cRIO-9081 running NOR-DAQmx 15.5.  On four of the cRIO-9018 we show you cDAQ - 9178 with 8 modules.  Everything just worked.  On the fifth cRIO-9018, we tried to connect a cDAQ-9174.  The aircraft appeared in the Windows Device Manager and MAX, but MAX has indicated that the aircraft was missing (error-88705) and that Windows can't find a driver for the instrument.

  We then plugged a cDAQ-9178 in the fifth cRIO and everything just worked.

  What is the difference between a cDAQ-9174 and cDAQ-9178 other than the number of the module support?

  Paul

  Hi Paul,.

  It seems it could be a driver problem! What DAQmx version you have installed on two computers? Reinstall the latest version may be worth it because it looks like there may be corruption. You can find the latest version here: http://www.ni.com/download/ni-daqmx-15.5/5901/en/

  You can manually associate the device driver, here: http://digital.ni.com/public.nsf/allkb/5B80CAAA64413B4C86256C5E0000C1A7

  There are modules connected to the cDAQ chassis?

  Also, sometimes, this can happen if you do not restart your computer after the installation of the NOR-DAQmx driver. Restart your computer after the driver installation will allow you to reserve the device successfully. Here are a few others not to try:

  • Check the charger to device OR to see if it is running
  
  
  • Reset the service OR charger
  
  
  • Reset the MAX Configuration database
  
  
  • The system power cycle

• Difference between DAQmx DAQmx Base and acquisition of Legacy data

  Hello

  What is the difference between NI-DAQmx, DAQmxBase and acquisition of data Legacy and what are the characteristics of these materials

  See this FAQ.

  And it's the software, not hardware.

• What is the difference between the NEX-5 and NEX 5R

  I would like to know what is the difference between 5R NEX5 and NEX to help me choose the best.

  Thank you

  Here are some key differences between the NEX-5 and NEX - 5R.

  NEX-5

  • Sensor CMOS APS - C with a resolution of 14.2 million pixels
  
  
  • video recording Full HD 1080/60i
  
  
  • the speed of 7 frames per second in burst mode
  
  
  • ISO sensitivity up to 12800
  
  
  • Sweep Panorama and 3D Sweep Panorama modes
  
  
  • Autofocus contrast with 25 points

  NEX5-R

  • Sensor CMOS APS - C with a 16.1 megapixel resolution
  
  
  • video recording Full HD 1080/60 p
  
  
  • the speed of 10 frames per second in burst mode
  
  
  • ISO sensitivity of up to 25600
  
  
  • Panoramic scan mode
  
  
  • Quick autofocus hybrid with contrast of 25 points of 99 points phase detection autofocus and auto focus

  In addition, the NEX5R has built-in Wi - Fi that allows you to install applications and extend the functionality of the camera. Built-in Wi - Fi will also allow you to transfer images wireless to a smartphone, Tablet, the computer and the TV.

  If this post answered your question, please mark "accept as a Solution.

• What is the most important difference between 3D Picture control and controlling the display of Simulator

  I want to create a simulation of 3D on the front panel, and I see that we can use a 3D image control or a display of Simulator control. It seems that each of them can be used at the same position. What is the most important difference between 3D Picture control and display of Simulator?

  Hi sfh1,

  You are right, I found examples of Robotics that use 3D photo control and display Simulator control to display a scene 3D on the front panel. After further research, it seems that control the display of Simulator adds additional features compared to the 3D picture control. The control displays Simulator allows the user to right-click control during execution and change the background color, draw fashion, draw contact, view the ID of robot, display sensor data, suspension of service Simulator and reset service Simulator.

  More in depth on these options and the display of control Simulator can be found here:

  http://zone.NI.com/reference/en-XX/help/372983D-01/lvrobogsm/robo_controls_concepts/

  If you would like more information on the picture here 3D control is another resource:

  http://www.NI.com/white-paper/3170/en/#toc2

  Kind regards

• What is the difference between HP Photo Creations and Snapfish

  I've been curious.

  What is the difference between HP Photo Creations and Snapfish?

  Hi Jeff17866. The difference between these two services are the location, accessibility and share-ability of the recorded images. Snapfish is a photo on the web edition and sharing and belonged to printing HP service. You upload your images on the Snapfish site and share with other sites (Facebook, Flickr, etc) by selecting the appropriate options. The images are then stored on the cloud, and you will be able to access it from any device with Internet access. So, if you want to easily share your photos with your friends and family around the country, Snapfish is a great tool to do. HP Photo Creations is a photo editing software that you download to your desktop. You can edit your photos and order prints just as with Snapfish, but all pictures remain on your hard drive. They can be shared by downloading files on the sites you want the images appear, but you are not able to access it on other devices. -Chauntain