Qosmio G30 - 190 can't start

I have the Qosmio G30 - 190 model No computer. PQG30E-039023FR

There is often a blue if poster tell me there's an erros on the system
I tried to restore from the TOSHIBA restore CD. but after you create the software image and eject the recovery CD, the Qosmio stop automatically. And when I restart that tell me Windows errors, the software is not installed try to install it again.
I have change the memory to see if it is the problem, but something happened

Let me know if you can help me to solve these problems, thank you in advance for your help.

Ayaovi

What do you mean "stop automatically"? The machine has been shut off instantly? Alternatively, windows closed down by itself?

If it turns off instantly, then it might be the accumulation of dust in the heat sink causing it to overheat.

You should test the RAM before reinstalling Windows. You can download the bootable Memtest on www.memtest.org CD ISO

Tags: Toshiba

Similar Questions

  • Qosmio G30 (PQG32L) - can use only 3.25 GB of memory on Windows 7 64 bit

    My Qosmio G30 (PQG32L) found 4 GB of memory, but only 3.25 GB of memory can be used. I'm updating to Windows 7 64-bit, but it does not help.
    BIOS reports 4 GB of RAM.

    Windows 7 64-bit operating system

    Anyone can activate the Qosmio G30 usable memory to 4 GB?

    What Intel Chipset is in the G30? (Launch CPU - Z to find out. Google is your friend)

    Some Intel chipsets are limited to 3 GB.

  • Qosmio G30-102 - can I install RAM DDR2 - 667 Kingston rather RAM DDR2-533?

    Hello

    I have a Qosmio G30 102 and I wanted to spend my RAM to a total of 4 GB (currently I have 2 GB installed with specifications of a PC2 - 4300 DDR2 (533 MHz)). So I searched for RAM, and I wanted to know it would be possible for me to install.

    * Kingston Technology - memory 2 GB PC2 5300 667 MHz 200pin SODIMM DDR2 *. Would it work properly and if so it would be better than doing a (* 1 GB) memory PC2 - 4300 DDR2 (533 MHz) * the standard RAM installed on my Qosmio?

    Thanks in advance for the answers of th

    MB

    Hello!

    To upgrade RAM on my laptop, I used Kingston DDR2-667, and it works without any problems! :)

    Thus, you can use this module Kingston too but I guess that it runs only on due speed 533 MHz FSB of the processor limitation. You can check with a tool of information material such as Everest or PC Wizard 2008 for example the speed of the FSB.

    As far as I know, the laptop can be upgraded to 4 GB maximum RAM.

    Good bye

  • Qosmio G30 - where can I buy cables for this?

    Hello

    I recently bought second hand a Qosmio G30 (PQG30) and I am looking to buy cables:

    VIDEO-IN cable
    Antenna adapter
    D-video output SCART

    I have problems to find them. Can anyone tell the part our or where I could buy them at plse?

    Mark

    Hello!

    I think that he should t be a problem to buy a cable to other computer stores. These are only external cables with standardized connector.

    But you should only purchase high quality cables. I don't have good experience with less expensive cord, for example without shielding.

    Good bye

  • Qosmio G30-161: can not see the second HDD in my computer

    Hello
    can someone tell me, that I rebooted reboot DVD in my laptop to restore all of the windows in the normal settings
    as I got when I bought the laptop.
    but for some reason when I go into my computer I do not see the 2nd HDD.

    There is only one disk c it but not the other hard drive. I need to change the settings of smoke to see the 2nd hard drive?

    Hello

    Well, the Qosmio G30-161 should be delivered with two hard drives of 60 GB.
    I guess you can see a single HARD disk due to the RAID settings.
    The unit supports RAID technology.
    I think that the RAID is on the mirror. This means that the data is duplicated on both disks.
    Generally, it should be possible to disable the RAID.
    Check the folder utilities Toshiba.

    PS: It is possible that you will lose data after changing the RAID settings. Be careful.

  • Qosmio G30 - 163 - can I update the graphics card?

    Hello

    I bought a new monitor for my PC Toshiba Qosmio G30-163.

    The screen is a Samsung SyncMaster 305 T more. Link: Samsung SyncMaster 305 T more: DSB http://edbpriser.dk/Products/Listprices.asp?ID=447236&searchArea=products&Soege = samsung
    The screen has a resolution of 2560 x 1600.

    My problem is that my laptop Toshiba graphics card can run an og resolution 1900 x 1200.

    Is it possible for me to buy a new graphics card and insert it into my Toshiba laptop?

    -So, I'll be able to run the resolution of 2560 x 1600 of the screen of my new...

    If so, what graphics card will recommend you?

    Kind regards
    Tobias Storm

    Hi mate

    Unfortunately, the graphics card is not editable in most cases, it welded s and he a part of the motherboard.
    But even you would be able to remove the chip on board additional parts like BIOS, etc. would not address the new chip.

    Good bye

  • Qosmio G30-175: can I receive DVB - T signals with Qosmio player?

    Hi all

    Is this only analog TV on the Qosmio player or can I use the DTV? (DTV fine in windows)

    Digital DVB works fine when started in Win Media Library but became only analog TV using only qosmio

    Thank you very much
    Franky

    Hello

    I'm sure that the Qosmio player receives DVB - T signals, but only analog TV signals.
    That's why you use MCE to watch DVB - T TV

  • Qosmio G30-211-can save on an HD-DVD drive?

    Hello!

    Is it possible to save on clear HD-DVD-r disc?

    Hello

    AFAIK Qosmio G30 comes with the first generation of HD-DVD players. This means that these readers can read-only. Qosmio G40 has HD - DVD which can read and write on blank HD-DVD media.

  • Qosmio G30: How can I install only of the recovery image Ulead Dvd Movie factory

    Hello world

    I have question about Ulead dvd movie factory.
    First of all, I bought my G30 with XP when it was time to offer "vista for a few euros.

    So, I installed Vista with the official CD of Toshiba. But he was more Ulead Dvd movie Factory. The XP is just a disk image restore CD, I can't install it.

    Does anyone have a solution for me?
    Thank you to.
    ARM

    I think there is a solution!
    I found the Ulead DVD Movie Factory utility on the page of Toshiba.

    I searched the area of Qosmio G30 but without to succeed.

    But I checked the other sections and selected Satellite Satellite A series Satellite A200 (PSAEC) Vista and found the version of Ulead DVD Movie Factory 5.51.0147.03

    Download a trial to install this tool.

    Need factory!

  • Qosmio G30-201: can I play HD movies with different region code

    Hi I have a laptop Qosmio G30-201 with the HD inside player. This area of the playback of movies HD 1 or is it stuck on region 2.
    Is not blocked is it possible to unlock it to play movies from all regions.
    This unit was purchased in the United Kingdom.

    Thanks Steve

    Hello

    As much as I know HD-DVD movies do not support region codes.
    Support is free region code and that's why I think you should be able to watch a HD-DVD movie, BUT you need a DVD player special as WinDVD8 example

  • Qosmio G30 - I can't update the BIOS

    I have a Qosmio G30 * PQG31A-01Y01F model number * purchased from the Australia.

    I downloaded the update to the BIOS (version 3.90) of the Australian from Toshiba Web site. But it still says "the computer is not supported. I know that this message appears when you try to update the BIOS to one lappy with another.

    Its frustrating because I am very sure that I downloaded the correct bios listed on the Australian site. It is very incompetent on the part of toshiba for not providing the correct bios of the same.

    Why cant they put an all .bin file. Now they are confused with that support, they have released so many model of qosmio worldwide

    I need this update bios because because it's a model that has been registered under the program repair GPU. Lappy so expensive and they come with a such blunder upward.

    It's strange. I found the same BIOS on another site of Toshiba, try this: http://support1.toshiba-tro.de/tedd-files2/0/bios-20080911134528.zip

    PS. you have installed Windows 32-bit or 64-bit? Is it Vista or XP?

  • Qosmio G30-161: can I use the Docking Station?

    Is there a docking station that I can use with my G30? I'm looking for something that will have USB, network and monitor connection to perform docking the G30 on my desk a faster and easier connection (more connection a load of cables each time)?

    Thank you

    Phil

    Hello

    No, it is certainly not possible to use a docking station or APR on the Qosmio unit.
    The unit should have a docking in slot at the bottom but the Qosmio hasn t he.

  • Qosmio G30-161 does not start - NTDLR "file is missing

    Hi all

    I have a G30-161 double HDD (in Raid 1) which no longer starts...
    He just gives the message "file NTDLR is missing" and is followed by a prompt to restart the computer in which the same error will appear again.

    I got this laptop for my son to fix (lucky me :(!)

    Things, I've looked at so far:

    -Check the BIOS to see if the disks are configured properly - BIOS indicates the two hard drives installed, online and in RAID 1
    -J' had an installation of Windows XP by hand disc then tried to see if it would boot from a CD. He started on the CD ok, but the process Windows Recovery Console/install said he couldn't find any hard drives. Find an Acronis True Image boot disk (using linux I think), once again the started program end, but don't have it no hard drives installed.
    - So with no HD not reports I took one for a test. With disk 2 removed, in an attempt to start the system reports "RAID 1 is GRADIENT" then follows with "NTDLR file is missing. So this tells me that SW RAID working probably and he knows that a HD has been removed.
    All the patches I've read on the PC forums involve the use of the XP Recovery CD or some, but it won't work because the system thinks there are no disc when it starts. We have no ' have a Toshiba Recovery disk for the machine.

    Someone at - he saw the problem above, knows a fix?
    Can I purchase a G30-161 recovery CD anywhere?

    Any help appreciated. ...

    Thank you
    Steve

    Hello

    Looks like your drive is loked I found a thread in forum about the same error message and the user mikeptag posted a solution:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?forumid=58&ThreadId=24051

    I didn't test this procedure and, therefore, I don't know m if it can help you or not, but in my opinion it's worth to try

    Check this box and post your results

    Good bye

  • Qosmio G30: I can't find the Linux for the Bluetooth and TV Tuner drivers

    I have the Qosmio Q30 HD-DVD (PQG32) on Ubuntu Linux. My problem is that I can't find drivers for Bluetooth and TV Tuner.

    Toshiba supports Linux? If so when I find it?

    Hi mate,

    Unfortunately toshiba officially doesn´t support linux, there is officially no drivers available. But toshiba has created a site for linux users, where they can find useful information:

    http://Linux.Toshiba-DME.co.jp/Linux/

    I hope you get what you need. :)

    See you soon

  • Qosmio G30 - Setup can't find any HARD drive

    I can't change windows MSE for vista on my G30 set up can not find any hard disk installed on it, but with toshiba drive reanimator it works! can anyone help?

    If I understand you right you use a disc of Microsoft to install Vista.

    Have you heard of driver SATA? You will need this driver otherwise that your HARD drive will not be recognized.
    Download drivers (as far as I know the Intel Storage Manager) and load it after booting from the CD or use you nLite.

    In the forum are already a lot of thread on this Yes please read a little.

Maybe you are looking for

  • Dynamically short VI of the executable

    I try to run one of the screws of a source distribution that is outside the main executable file. When my program is not an executable (only source code), everything works fine. But the VI does not run when it is called executable, unless I open the

  • Svshost.exe - Application error

    My system works fine for awhile, then windows displays switches for classic Windows, sound stops working and I get this error. Svshost.exe - Application errorThe instruction at "0x011cf496" referenced memory at "0x011cf496". The memory could not be "

  • Alienware X 51 R2 formatting hard drive

    Hello world. This is my first post in this community, so please be polite... Currently I have Alienware X 51. It was delivered with Win8, later, I upgraded to Win10. I don't have recovery discs at all. Never had. I tried to install Win7 (I Win8, but

  • HTTP 403 error could not sign in-app

    When I try to sign runtime Android apk file bar, I get following error Error: Server returned HTTP response code: 403 for URL: http://www.rim.net/Websigner/servlet/RDK-Waterloo What's not here? I give good csk & keystore password. I use BlackBerry Ap

  • 802. 1 x with dACL - prefix of an invalid attribute: "ACS."

    Dear all, I spent half an update to fix this problem without success, I hope you could help me. I configured a simple solution of 802. 1 x on a PC driver who must authenticate through PEAP-MSCHAPv2 users against my user database internal GBA. Version