Qosmio G30: Qosmio Player supports DVB - t?

The Qosmio television part of my comuter only lets configure analog programs (4 of them). The windows media TV works perfectly and all (73 of them) gives free view digital programs.

How can I get the Qosmio to grant to the digital television programs? Operating manuals and the online manual are silent on the tuning.

Hello

Seems that the Qosmio Player does not support DVB - T.
I found information that 4.3 Qosmio player and older Version does not support the DVB - T signal. The DVB - T signal can be used only in the operating system of Microsoft.

Seems there is nothing to see! :(

Tags: Toshiba

Similar Questions

  • Qosmio G30-175: can I receive DVB - T signals with Qosmio player?

    Hi all

    Is this only analog TV on the Qosmio player or can I use the DTV? (DTV fine in windows)

    Digital DVB works fine when started in Win Media Library but became only analog TV using only qosmio

    Thank you very much
    Franky

    Hello

    I'm sure that the Qosmio player receives DVB - T signals, but only analog TV signals.
    That's why you use MCE to watch DVB - T TV

  • Qosmio G30-194: cannot install on SSD OCZ Qosmio player

    Hi all

    I have a laptop Qosmio G30-194.
    When I have only used the hard drive regularly no problem with Qosmio Player facilities.
    But now, I replaced the HDD to the SSD OCZ.

    At this point impossible to install it.
    Always had the same massege "an error has occurred during the recovery of Qosmio Player! Please retrieve the image again from the beginning."

    Tried to put the Qosmio Player before installing the Windows Vista 32-bit, but the same results. Always used the original restore cd that I have the Toshiba.

    Someone knows a solution, please let me know.
    Thank you
    Kornel

    Hello

    There is a big problem. HDD SSD is too fast ;) and it is not recognized correctly. It is recognized as FlashDisc. I'm sure he's confusing procedure facilities Qosmioplayer. For the installation of the OS there is no problem at all.

    I don't see any solution. Maybe you can try to create a partition of unsllocated 5 GB in the front of the boot (C) partition to see if the Qosmioplayerwill be able to recognize as a destination for the installation. Otherway if you use Vista, but also WinRE partition. Oh man. It's quite complicated.

  • Qosmio G30-158: is it possible to watch digital TV with Qosmio Player?

    Living near Paris, I recently purchased a QOSMIO G30-158 PC, with tuner hybrid, and even if it is easy enough to watch digital tv programs with Windows Media Center, I don't understand why the Qosmio Player can only watch the analogue programmes, but also non-digital programs (my Qosmio Player references are v4.4.1 built 2006030822)? Thanks for helping me

    Alain

    Hello

    Yes, you are on the right.
    The Qosmio player may be able to receive only analog TV signals and its not able handle of digital television.
    If you want to watch digital channels, you must use the MCE.

    A few days ago I found this info on the net, but he did not also for me.

    Now I know and u too ;)

  • Qosmio G30: How to install Qosmio player under Win XP?

    I bought Vista Ultimate inside a new G30. Many applications and devices does not work on Vista and I decide to do a migration to XP PRO. Windows work great but... How to install Qosmioplayer on XP PRO (TV buttons) and the rest of the work.

    I have several CD recovery Qosmioplayer (from toshiba ftp), but all give me the message: the recovery is not for this system? There is version on XP PRO?

    Hello

    On the European driver Toshiba page, you will find the Qosmio Player Utility for Windows XP MCE (should also work with XP Pro) or the independent version of the OS.

    Choose the Qosmio G30 (PGQ30) I found the player Qosmio for Win MCE v1.61 and OS independent version 4.4 - 200601112.
    Choose the Qosmio G30 (PGQ32) I found the player to Win MCE v1.70Qosmio.

    I recommend trying to install these utilities and check which version will work on you laptop.

  • Qosmio Player does not not on Qosmio G30

    Hello

    I got my laptop to out of area using the Toshiba recovery cd and now the qosmio player does not work. I can not play music without having to start Windows.
    I looked in the drive of all programs-utilities Toshiba - qosmio and he says that file not found.

    Help, please

    Hello

    There is a CD that comes with your laptop called:

    For the Qosmio player recovery CD

    you have to start the laptop from this CD, in the same way that you used in the installation of the windows recovery

    and follow the instructions

    concerning
    _________________________

    Please don't forget to take a look here:
    http://forums.computers.Toshiba-Europe.com/forums/help.jspa?helpType=reward

  • Qosmio G20: Problems with tuner TV and Qosmio player on Linux

    Hello!

    I would like to install a Debian's Linux distribution based on my machine... But it looks like there could be some problems with a TV tuner and the qosmio player.
    Is there someone who could help me with a viable solution for this?

    Lasse

    Hello

    Well, you need a TV tuner driver, but the problem is the LINUX operating system.
    There is no drivers for Linux. Toshiba doesn't supports Linux. In addition, you will not find also all the drivers.
    All you can do is to use the Windows operating system. The Knoppix and Kanonix are very nice Linux distributions. You can run these Linux from the live CD. You n t need to install anything.

  • Qosmio F30: Utility of Qosmio Player available 1.70

    Qosmio Player 1.70 utility Date November 22, 2006 for Qosmio F30

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

    Laptop - Qosmio - Qosmio - Qosmio F30 - F, WinXP MCE - Qosmio player utility

    Also check the download section in the Web from Toshiba site, there are new drivers for G30 also

    You are very attentive forum user. Thanks for the info

  • Qosmio G35: How to create Qosmio Player CD image

    Hello

    I am Brazilian and I have a Qosmio G35 AV600.
    A month ago, I deleted all my partitions and after I reinstalled the operating system, I realized that he lacked QosmioPlayer.

    Software based on the web that I discovered that I need the Qosmio player recovery CD to reinstall linux to research.

    I called 10 times in the Toshiba Support centre, opened a ticket and all the times that I have been informed that the
    Relations with international consumers would call me in 1 hour.

    In any case, is - anyone can help me create an ISO (image) on the real CD and UPLOAD the image in a GMAIL account or somewhere else?

    I appreciate really.

    Thank you...

    Hello

    Sorry, but you have to order this utility at the Toshiba service partner in your country.
    But I wonder why you didn't get this CD with your laptop. Usually these CDs come with laptops.
    Anyway, the CD is not expensive and you will get the original.

    CU

  • Qosmio G20: Qosmio player and FM Tuner

    I saw a question on the FM tuner in the Qosmio G20 series (and other portable with Qosmio Player). Users responded that the Qosmio Player has no FM tuner! That's wrong!

    I did a manual search in Qosmio Player using frequency analysis, and it is possible to scan the frequency range of the FM band. So, I found a few radio stations that I can save. The resolution is not the best but you can easily find radio stations!

    Hello

    I agree with Togan. The units are supplied with different hardware configurations.
    As a result, some units support a tuner and are supplied without the tuner.

  • Qosmio Player - where is it?

    Reading all the posts tv tuner probs talk a lot is said about Qosmioplayer. Where is he? I have a G20 and have tried to connect the tv via my tv in media Center. The software was loaded at the factory and I have a recovery disc qosmioplayer, just do not know how to use it! Thanks for your help.

    Hello

    Qosmio Player is installed on a partition of your device. If you want to start the Qosmio Player power must be set to off, then you must press the key with the symbol of the TV. (Monitor IN). But all the useful information on Qosmio Player and other functions that you can fins in the user manual. Select this check box.

    Good bye

  • Qosmio Player download

    Where can I download a copy of the Qosmio Player for the F20?

    Thank you.

    Hi Jimmy

    As far as I know it of not possible to download a copy of the Qosmio Player.
    If you buy the Toshiba Qosmio machine, you will get the Cosmio Player on CD or DVD, as well as to other media (restore CD, CD) additional recovery.
    If you have lost one of the CDs, you can try to contact the service partner for the replacement.

    Good bye

  • Differences of the G20-118 HDD and Qosmio Player

    Hi all.
    I purchased a Qosmio G20-118 and theres a small diference between the hard drive.
    It has two built in 80GB HD, but in the bios, I see the first HD 79 GB and the second as 80 GB.
    Where is the 1 GB missing from the first HD? Qosmio player?
    If this is the case, then the RAID function only works with two 79GB HDD so I lose 2 GB HARD drive plus the loss of space for the RAID function aditional. If a drop about 5 GB of HARD drive.
    How do I get arround this?
    What I need to get rid of Qosmio Player to have two HD 80 GB? If so, how can I get rid of him?

    Thank you!

    Hello

    You are right. The Qosmioplayer is preinstalled on the hidden partition. Because of this, the HARD disk capacity is less than 80 GB.

    In my opinion the Qosmioplayer is very nice and useful tool and it is not necessary to be deleted. If you want to use any ability of the second HARD disk do not use RAID option.

    Do the backup data on an external device. On this way, you will lose 1 GB available on both hard drives of 160 GB.

    Otherwise you must preinstall the unit with recovery media. After that the Qosmioplayer is deleted.

  • Qosmio G10-133 - Install Qosmio Player and using the recovery disk

    Hi again.

    My g10-133 was the mother of uypgraded installed by Toshiba that there are back and forward in his first year with problems of graphics chip, so they installed the motherboard with the 6200 chip chart.

    Until very recently, I installed Windows XP to one of my dead computers that I've ever had anywhere with my original recovery qosmio disc such that it has been damaged. I recently bought an other G10 as I wanted to replace the keyboard and display and it came with disks,

    I put in a raw player. I used the recovery of the Qosmio player disc, and this indicates that it is complete. I then installed the Toshiba Recovery disk that has Windows MCE on it. (I have now three original copies of the present). But when windows go to start, the computer gets past the Bios and then quickly goes to the blue screen of death... I tried to use break so that I can read this, but it does not work. I tried more than a windows disk, but not joy. I also had special instructions for Toshiba, which has the Qosmio updater on him, and also another drive which has some additional drivers.

    So far, I've tried all sorts and whenever I go to start the laptop, it crashes. The Toshiba recovery disc has two methods that an automatic and a step forward on (which I don't have a clue how to use). The automatic, which does not implement the normal windows installation, but evokes a Toshiba says... and it goes from 0% to 100% and ends each time.

    If I use my Windows XP disk from another pc it install fine. and the laptop is fine until it reaches download Windows SP3, which seems to slow everything down.

    I would like to install the Qosmio to style factory if pos.

    What you need to help your service provider which has replaced the motherboard. A long time ago I heard talking of this and what I know is that the machine must be ready for use: This means service must update the BIOS, verify compatibility of memory, RAID functions are not the same, Bios, EC/KBC and DMI must be updated and rewritten. The laptop owner must be willing to work with new hardware components.

    If I m remembering well this new mainboard has different chipset and recovery image that you are trying to install has really bad drivers inside. With other words: after the Exchange system motherboard drivers and the Qosmio Player require an update.

    You know the whole process is a bit complicated, but, as far as I know, Toshiba service provider must send you instructions for Qosmioplayer update and instructions for the update tool.

    At the moment I can't help you. Please call again and ask for help. If you will not get any help it let us know.

  • Qosmio G10-122: I can't find the Qosmio player

    I buy the qosmio g10-122, but I can't find the Qosmio player in Notepad.
    I need this software and I will download this Internet but I'm not sure this could work whith my laptop.

    Hi Adriano.

    Have you checked all the stuff that was delivered with your Qosmio? There the Qosmio player installation CD?

    QOSMIO player is already preinstalled on your laptop on a hidden partition. Check the user manual. There is a detailed description how it works exactly.

Maybe you are looking for

  • App 5 & SSL server certificate warning

    Hi guys,. I use 5 App Server from another machine to access my server El Capitan on a Mac mini. When I open the Server app from my remote machine (MacBook Air), I get a screen popup on connection of server SSL certificate and that I want to continue.

  • How to I have restart Firefox without restoring a previous session?

    Whenever I encounter a suspicious site (like a fake antivirus, redirection porn site, etc.), I'll close Firefox 6 using the Task Manager (CTRL-ALT-DEL then Applications / Close). I do this because sites often suspicious Web you don't have to click on

  • How to stop the monitor go black after no activity for a short time during the reading of a document?

    When I read an email or document without moving my mouse, the screen turns black after only about a minute and then proceeds to my screensaver.  I have to move the mouse constantly opening my active window.  I can't find out how to disable this "Ener

  • Analog channel scan - skeleton

    Hello I use NEITHER-DAQmx in visual basic to scan 8 channels on a Windows timer component and I'm trying to separate the initialization code of the code for the analysis. The code example lists all the functions I need to call sequences, but it is no

  • Update HorizontalFielManager switch

    how it could change the focus of the fields manually, IE go to a place you choose, because when the HFM is the emphasis placed on the first, but when you lose and go back this pass in last place