QT elongation problem

Problems with a short video.  Looks good on the FCP timeline.  Then when I export to Quicktime or Quicktime conversion the final result is crushed vertically.  Have two different proportions in the original film.  HD 1280 x 720/30 p [i.e. the proportions, I like to keep because it is a dancer] and HD720p [shot with my phone].  It's okay if the HD 720 p images are a little distorted, but NOT the 1280 x 720/30 p.  Want to preserve the aspect ratio.  Your help is most appreciated!

What is the codec of these images you are working? Convert you to ProRes before editing it? He therefore ProRes 1280 x 720? And how you export? If you export the QuickTime > use the sequence settings... it should look exactly the same as it does at the FCC.

If your footage has not been converted to ProRes before editing it... then FCP could be problems with it. Because the FCP 7 and earlier versions cannot work with H.264 MP4 formats. It must be a codec like ProREs FCP.

Tags: Professional Applications

Similar Questions

  • Since the installation of the service pack 1 (KB936330), the desktop icons are minimal, fonts are elongated and photos are crushed and elongated. is that a monitor problem or how to fix it.

    This has happanded since I installed service pack #1 (KB936330).

    I tried fixing with appearance of customization / advanced but since I am running Windows Aero Theme none of the changes seem to take effect.

    Go to the Web site of the manufacturer of your card for computer laptop/ComputerGraphics > drivers and downloads Section > key in your model number > looking for the latest graphics drivers for Vista > download/install them.

    Then:

    http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

    Change the screen resolution

    Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

    See you soon.

    Mick Murphy - Microsoft partner

  • Microsoft Paint problem with preview and images printed in being extended

    I used Microsoft paint for years and all of a sudden, I'm having a problem where when I previews the image in paint is be lying and it is also elongated impression. However, the image in the window of the paint itself is fine, and if I open the image in another application IE. Photoshop - image presents a preview and prints correctly. What has changed and how I can fix?

    As I said previously... I guess just but you mentioned that the distortion
    was not only visible when in preview but also appeared on the print
    document. If it occurred during the display, I suspect the video driver.

    If the printer has not been updated for many years... of the manufacturer
    support site might have an updated driver, you could try. And it is certainly
    possible that the printer has nothing to do with this issue...

    If everything worked perfectly until recently... it may be worth trying
    do a system restore in Mode without failure for some time before painting began to have
    problems.

    If you receive auto-mises to update WIndows Update... it is possible that a
    a driver updated of some type has been installed that you aren't aware of.

    Given that the painting seems to be the only application affected...uninstalling/reinstalling
    may be worth a try... but you would need a Win XP install disk.

  • All my images are slightly elongated in the horizontal direction

    All my images are slightly elongated in the horizontal direction... squwatty. How can I return to normal. This happened after my 2 years messed with the computer and I can't understand what she was doing.

    Perhaps, do a system restore may solve it. Choose the date before your yr.old 2 messed with your computer autour. Use this date or a date, you know that there is no problem as long as your restore point.

    Start button > Search box, type system restore > press the Enter key > uac prompt > click on choose a different restore point > next > select dates as your restore point, until the click > next > finish
    To sit and wait. The machine restarts when it's done.

    Note: In most cases, do it in safe mode system restore is more preferable.
    Here's how to get safe mode:

    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and select Safe Mode.

  • WinSCard.dll with elongated APDU (Lc = 0xFFFF) throws m_SCardTransmit: 6 000006C deliver on Window7 x 64 OS

    With PCSC reader, when I send one elongated APDU with the size of data equal to or greater than 65530 bytes, I get an error m_SCardTransmit: 000006C 6 on the window 7 x 64 bit OS. When I do one even on Windows XP 32-bit (x 86), it works without any problem.

    After some research I found that the meaning of this error as: 1734, 0x000006C6, the table limits are not valid.

    Its looks like that WinSCard.dll is incapable of managing a large APDU. I checked my tool, which send a complete APDU without any manipulation using m_SCardTransmit API.

    The size of my APDU is as below:

    5 bytes of header APDU + 2-byte length data + 65530 bytes of dataIN-Total number of bytes 65537-infinity online online!

    Code:

    char sTempBuffer [100];
    char sOrderCat [131088];
    ByteAPDU_T1 BYTE [65544] = {0};
    ByteStatusWord BYTE [65537] = {0};

    ..................

    ..................

    dwAPDULength = sOrder.GetLength () / 2;

    iRet = m_SCardTransmit (m_hCardHandle, m_SCARD_PCI_T1, byteAPDU_T1, dwAPDULength, NULL, byteStatusWord, & dwStatusWordSize);

    If (iRet! = SCARD_S_SUCCESS)
    {
    sprintf (sErrorCode, "m_SCardTransmit: % 08 X", iRet ');
    TraceError (GetErrorCode (iRet), sErrorCode); Here I'm getting above error
    }

    Please help as soon as POSSIBLE. Thank you.

    Concerning

    Gopal

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • Problem creating DVD

    I made a DVD using create DVD windows 7.  However, in the DVD images are stretched and elongated - i.e. distorted.  I used a DVD - RW disc. The DVD does not work in my tv DVD player.  What I am doing wrong?

    Hi Kaaawakid,

    Thanks for posting your query in the Microsoft Community Forums!

    I understand that the images on the DVD are stretched and distorted after burning DVD Windows was created. Also, you cannot run from DVD tv player.

    I would be grateful if you help me with more information.

    1. this problem occurs with perticular DVD or the DVD?

    2. What is the format of the image file?

    3. have you tried it on another computer using this DVD?

    4. you have any third-party DVD burning software?

    I recommend you follow these steps.

    Method 1

    See the help article and check if it helps

    Solve problems with creating a DVD-video using Windows DVD creation

    http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

    Method 2

    Check if you are able to burn DVDs successfully using Windows Explorer.

    Burn a CD or DVD

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

    For reference:

    Burn a DVD-video using Windows DVD Maker disc

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-DVD-video-disc-with-Windows-DVD-Maker

    Response with more information to help you.

    Let us know if you encounter problems under windows in the future. We will be happy to help you.

  • Mixture of Framerates in first Pro CC - problem

    Hey guys, hopefully get you some advice for me,

    I've been on vacation and we had different cameras to record everything. Everything is shot in 1080 p but the framerate is different. GoPro stuff is shot at 60 p (for the ability to do a slow motion later), and my plans of GH3 is turned usually 50 p (same reason). I know that the errors I did by choosing the same display every time rate. But now I have the problem, that I want to do a project in first Pro CC where I use each item in the same sequence.

    I thought 25 p is the best choice, if I have the opportunity to play excerpts from 50 p in slow motion (with interpreted as 25 p). Can I just insert the 60 p clips? When I intepretate the 25 p clips, they are all, of course, idling. To make them 'direct movement' I must speed up to 220% or sth. Like this. Isn't that create the same problems?

    As you can see I'm a bit confused, if something could help me, really. Is it possible to use each clip in 'direct movement' and, if necessary, slow down some clips without having any problems with images/jump, stuttering and stuff like that?

    Alex

    In most cases, there is no need to interpret the film allows you to adjust the frame rate. First will adjust automatically for clips with different rates, as explained on this page for help: Help for Adobe Premiere Pro | Adding clips to sequences (a search on 'mixed frame rate' me, he got in a jiffy.)

    Here's the paragraph:

    Mixture of element types in a sequence

    You can mix clips with different rates, frame elongation and sizes of images in the same order. For example, if you drop an HD clip in a sequence in an SD project, the clip will be letter-boxed and scaled to the size of the SD image automatically. Similarly, if you drop a SD clip in a sequence of an HD project, the clip will be in pillar boxed automatically.

  • Component of GridBagLayout resizing problem

    Hello

    I am designing a swing GUI and decided to a GridBagLayout because it offers the most freedom.

    What I have intended, had a basic GUI, to which an additional panel would be added at the click of a menu option.

    Before the selection of the GUI is very well, all components are present and properly sized. However, once this additional panel is added, and the elongated JFrame window width, the sizes of some components increase who painted on a JMenu.

    I'm not sure why some components are getting resized, as the method of adding Panel removes and adds that the problem of those components. Although I finally deleted and then added all the components.

    Here's the code to add components to the JFrame. the order in which the method is called is SetConstraints ("init"), SetConstraints("add"), and SetConstraints("remove")
       public void setConstraints(String called) {

        GridBagConstraints c = new GridBagConstraints();
        if (called.equals("add")) {
            window.remove(slides);
            window.remove(outputs);
            window.remove(canvas);
            window.remove(emotionButtons);
            window.remove(buttons);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 0;
            window.add(buttons, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 1;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 5;
            c.gridheight = 8;
            c.gridx = 1;
            c.gridy = 2;
            window.add(canvas, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 2;
            c.gridheight = 9;
            c.gridx = 6;
            c.gridy = 2;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 3;
            c.gridheight = 5;
            c.gridx = 8;
            c.gridy = 2;
            window.add(emotionButtons, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 2;
            c.gridheight = 6;
            c.gridx = 11;
            c.gridy = 2;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 3;
            c.gridheight = 5;
            c.gridx = 13;
            c.gridy = 2;
            window.add(slides, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 9;
            c.gridheight = 1;
            c.gridx = 8;
            c.gridy = 7;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 4;
            c.gridheight = 2;
            c.gridx = 10;
            c.gridy = 8;
            window.add(outputs, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 10;
            window.add(new JLabel(" "), c);

            window.repaint();
            slides.addActionListeners(this);
            outputs.addListenersToButtons(this);
            buttons.addListenersToButtons(this);
            emotionButtons.addListenersToButtons(this);
            canvas.setListeners(this);
            emotionButtons.repaintIt();
        } else if (called.equals("init")) {
            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 0;
            window.add(buttons, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 1;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 5;
            c.gridheight = 8;
            c.gridx = 1;
            c.gridy = 2;
            window.add(canvas, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 2;
            c.gridheight = 9;
            c.gridx = 6;
            c.gridy = 2;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 3;
            c.gridheight = 5;
            c.gridx = 8;
            c.gridy = 2;
            window.add(emotionButtons, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 2;
            c.gridheight = 6;
            c.gridx = 11;
            c.gridy = 2;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 3;
            c.gridheight = 5;
            c.gridx = 13;
            c.gridy = 2;
            window.add(slides, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 9;
            c.gridheight = 1;
            c.gridx = 8;
            c.gridy = 7;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 4;
            c.gridheight = 2;
            c.gridx = 8;
            c.gridy = 8;
            window.add(outputs, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 10;
            window.add(new JLabel(" "), c);
        } else {
            window.remove(slides);
            window.remove(outputs);
            window.remove(canvas);
            window.remove(emotionButtons);
            window.remove(buttons);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 0;
            window.add(buttons, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 1;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 5;
            c.gridheight = 8;
            c.gridx = 1;
            c.gridy = 2;
            window.add(canvas, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 2;
            c.gridheight = 9;
            c.gridx = 6;
            c.gridy = 2;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 3;
            c.gridheight = 5;
            c.gridx = 8;
            c.gridy = 2;
            window.add(emotionButtons, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 2;
            c.gridheight = 6;
            c.gridx = 11;
            c.gridy = 2;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 3;
            c.gridheight = 5;
            c.gridx = 13;
            c.gridy = 2;
            window.add(slides, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 9;
            c.gridheight = 1;
            c.gridx = 8;
            c.gridy = 7;
            window.add(new JLabel(" "), c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 4;
            c.gridheight = 2;
            c.gridx = 8;
            c.gridy = 8;
            window.add(outputs, c);

            c.weighty = 1.0;
            c.fill = GridBagConstraints.HORIZONTAL;
            c.gridwidth = 17;
            c.gridheight = 1;
            c.gridx = 0;
            c.gridy = 10;
            window.add(new JLabel(" "), c);

            window.repaint();
            slides.addActionListeners(this);
            outputs.addListenersToButtons(this);
            buttons.addListenersToButtons(this);
            emotionButtons.addListenersToButtons(this);
            canvas.setListeners(this);
            emotionButtons.repaintIt();
        }
    }
    Thanks for any help and will post screenshots, etc if the code is not clear enough :)

    Hello Fillis52,

    I don't really understand your logic. Why remove you components, and then add the same components, once again (and with the same constraints)?

    In general, the size of the components can change because GridBagLayout uses one of two sizes, depending on the available space: PreferredSize or MinimumSize (in the case where the PreferredSize is large to fit in the layout). The size of a column or row can also change when there is more space to be distributed according to the components weightx/weight constraints.

    Furthermore, it is recommended to create a new GridBagConstraints object every time we want to add a new component to the container.

    See also this little tutorial: http://wiki.byte-welt.net/wiki/The_GridBagLayout

    See you soon,.
    André

    EDIT: If the variable "canvas" made reference to an instance of the impossible, we know that it is not recommended to mix swing and awt gui components. Bat, we use JComponent or JPanel instead of canvas.

    Edited by: Andre_Uhres the 13.02.2011 08:06

  • Unable to Scan to the computer after downloading macOS Sierra. Is this a software problem?

    How can I scan from HP Envy 4500 to computer after downloading macOS Sierra?

    Hello wdemetris,

    Thanks for asking for scanning helps here in the Apple Support communities. I understand how it is important to have access to your scanner and am happy to offer help for this.

    As a precaution, we always recommend that you have backups to make sure that all your data is safe. You can perform a backup using Time Machine and an external hard drive. Use this article to help make a backup of your Mac: use Time Machine to back up or restore your Mac.

    Then, in accordance with article help: printer and scanner for Sierra, El Capitan, Yosemite, and the Mavericks macOS software, the HP Envy 4500 e-all-in-one is supported for printing and scanning. The drivers must be installed, but if not, if it please go to the App Store and check the updates tab to see if there are updates for HP. If there is, please install.

    If you have only general questions about how to get your updated scanner in place or how to scan pictures, please check out these two articles: macOS Sierra: implement a scanner & macOS Sierra: scan images or documents. If everything is configured correctly and you still have problems scanning, please visit this help article: macOS Sierra: scanning troubleshooting.

    Thanks again and have a great rest of your day.

  • My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    My iPhone 6 installed 10.0.2 stops when it gets to 40% of autonomy.  In addition, it seems to pass power WAY to fast with the new software.  Does anyone else have this problem?

    Hello brooksm549,
    Thank you for using communities of Apple Support.

    I got your message which, since updating your iPhone 6 to iOS 10.0.2 your iPhone stops when it is 40% and the power to empty very quickly. I understand your concern with the iPhone turn off and drains the battery. I recommend you to review the use of the battery to see what app contributes more to the battery drain. The following article will provide you with steps on how to check the use of the battery:

    On the use of the battery on your iPhone, iPad and iPod touch

    When you know about the soft uses more battery, you can change your settings in order to optimize the battery life:

    Maximize the life of the battery and battery life

    Best regards.

  • MacBook Pro display problem

    Hello members of the community.

    As of recently, I have noticed some glitches when feeding on my MacBook or awakened from his sleep.

    The colors are distorted, usually with pink, green, or yellow blobs. Blobs cannot entirely replace the colors, they appear to be contained in a element would normally be. For example. the menu bar will be partially pink and white, but pink does not leave the menu bar in this area, and the Office has green lines on it.

    I tried to take a screenshot, but the problem resolves in about 20 seconds, but it's a recurring problem.

    It happens when I wake up, connection or not. I had also certain powers serious and problems of performance, such that my MagSafe LED would not illuminate when plugged on rare occasions, fan could turn unnecessarily, graphics performance were SUPER slow, and the health of my battery was running out quickly. I actually ran a report on the system at 2 different times and my quality of full load is depleting of 1.2% per charge cycle, which is very worrying. I went from 6281 mAh mAh 6138 maximum capacity after two cycles of load. I'm tracking closely it because at this rate, my battery will survive only at load cycles about 150 instead of the 1000 expected, gives me the idea that this could very well be a bad battery. The computer is also warm to the touch while you sleep, not connected to the power supply. I NAP active but even taking into account should not be hotter my iPhone did the same thing.

    I have reset the SMC, and it solved a couple of problems. The charger works fine now and my performance improved considerably (which made me feel better, either it is a high-performance laptop, a 11-inch MacBook Air should not he surpass), and battery life has improved. I feel even if it uses a lot of power in his sleep. Maybe I need to turn off the NAP and see if that makes a difference. The graphic bug still persists however, and I don't have enough time to see if the max battery is depleting again.

    In regards to the bug, is there something that can be done? Basically, I want to assure you that I took all appropriate measures or if someone else has this problem to see if it can be software related instead of my computer.

    I have the entry level MacBook Pro with the retina, last generation.

    Any constructive contribution welcome!

    See you soon.

    -adreaux

    Hello bernardn753,

    After reviewing your post, it seems that you are having problems with the screen showing strange things on it. Looks like you already have a troubleshooting. I recommend you read this article, as reset NVRAM would be to reset your screen resolution settings that should help.

    How to reset the NVRAM on your Mac.

    Thank you for using communities of Apple Support. Good day.

  • with IOS 10.0.2 - 5s iphone Bluetooth problems

    Since upgrading ISO 10.0.2 my M50 from PLT Plantronics (helmet unique headset) do not reliably connects with my iPhone 5 more. I have to go to the settings, activate bluetooth turned off/turned on, touch the device on the bluetooth page, etc. Once it connects successfully, it will reconnect (if I turn off the headset and turn it back on) for a short period. The next day he does not connect itself but I play with bluetooth on the iPhone again.

    It has always worked perfectly before the 10th of IOS.

    And, as I noticed others mentioning, the volume is much lower with IOS 10. The maximum volume is much lower. I can barely hear it now, more normal background noise, while driving.

    I did:

    Forget this device for the PLT M50 and paired again (several times)

    I did a Reset Network Settings

    I don't know what else to do - but it's a 10.0.2 IOS issue.

    Hello AppleUser2k,

    Please ask questions about your problems of connection between your iPhone and your Plantronics headset since you upgraded to iOS 10. I understand how important it is to have your Bluetooth devices connect with your iPhone with reliability. Here's what I recommend.

    The first thing we want to make sure is that all your data is safe. You can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

    Once your data is safe, try the troubleshooting steps in this article to help: get help to connect a Bluetooth accessory with your iPhone, iPad or iPod touch device should also check with the manufacturer that the device has all the drivers and firmware to work with the new version of iOS.

    If you have checked everything and that you have installed the latest firmware or driver and always are problems, please be aware of your surroundings when you encounter these problems. If you can isolate the time or location, you see the problems, you can isolate the cause. You can even see this help article to ensure that you are not affected by outside interference: the potential sources of Wi-Fi and Bluetooth.

    Thanks again and have a great rest of your day.

  • Problem after update 10.0.2 iOS iPhone touchscreen

    After I have updated to iOS 10.0.2, I noticed a problem with the touch screen. Using the position of the image on the right side, near the corner, the toushscreen does not work.
    For example: when you use the keyboard, I can't type the letter 'P', have trouble typing BACKSPACE. Using the Contacts app, I can't scroll through using the alphabet bar.

    Do what idea of the problem?

    Kind regards!

    Hi fabriciorela,

    Thanks for the upgrade to iOS 10! I understand that the right of your screen is unresponsive to the touch. You can try the steps in this link to fix the problem. If the screen of your iPhone, iPad or iPod touch does not respond to touch

    If it does not help the problem, try to restore the device to factory settings. I would like to backup your important data first.

    The backup of your iPhone, iPad and iPod touch

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod to factory settings

    Please use the Apple Support communities to post your question. Let us know how it turns out. Have a great day.

  • Bluetooth connection problem iPhone - audio system Nissan after upgrade iOS10

    After iOS10.0.2 iOS9 on iPhone upgrade, I got a cordially problem receive calls raise Nissan car audio.

    I can make a call without any problem. Bluetooth connection is stable. I can download address book e.t.c. But I can't receive a call. I see the incoming call on the radio shows. After pressing the button "answer" on the car Audio System, audio between iPhone and Audio streams car breaks down.

    But the cellular connection remains active. I need to rotate the audio output on the screen of the iPhone car for iPhone and back to the car. After that, I can continue my call via the car radio.

    Thanks in advance

    Hello StasV,

    Thank you for using communities Support from Apple. I know having a problem with calls on your iPhone in your car, it's not what you expect. The good news is that these steps will be useful for your problem of phone calls while using the bluetooth in your car. Go to settings > general > accessibility > routing of Audio calls and the value headset/Bluetooth Headset and retest your question.

    Audio routing call - the iPhone user Guide
    Help to connect your iPhone, iPad or iPod touch with your car radio

    See you soon!

  • 2 iphones on one iTunes, problem of photo icloud account

    OK, my brother-in-law just updated its OS on his Iphone. He shared an Apple ID with his wife, who has his own iPhone. They all have two backup only in iCloud. His problem is that his wife photos are now on his phone. How can he fix it?

    Get its own identifier Apple- create and start using a Apple - Apple Support ID

Maybe you are looking for