Quadro k4000 vs GTX 760. only one for AE
I have 2 computers and planning to mix them together as possible. I built a PC with quadro k4000 last year because I graduated as a 3D animator, I intend to work as a facilitator and I also have another PC with GTX 760. and now, I am currently working as a video editor. So here are my questions:
-k4000 and gtx 760 which we could do better in AE and Pr?
-J' read some articles said: "quadro and gtx can consolidate upward in a PC. is it really possible? because some people said yes and some people said no and some people said yes but do not work together blah blah. I really want to know about it, because now I have these 2 GPU. and if YES. can you show me how do?
There are two my PC specs:
Processor: core i7 3820 3.66 hz
RAM: 16 GB
SSD 128 gb
HARD DRIVE 3 TB
Motherboard: Asus P9X79 PRO
VGA: asus GTX 760
Another is:
Core i7 - 3930 K 3.20 GHz processor
RAM: 32GB
SSD: the 256 gb
HARD drive: 3 TB x 2
Motherboard: ASRock X 79 Extreme6
VGA: quadro k4000
Can someone help me build these 2 PC in only 1 PC possible?
Yes, they will work together if you install the right driver. Use the Quadro for output and map of 760GTX like the GPU acceleration.
Eric
ADK
Tags: Premiere
Similar Questions
-
How do you get the screen message appears only one for each case?
Hi friends,
I'm here with another question...
I built a VI that must contain 6 boxes, when a particular check box is selected by the user, it should display a message to the user that the checkbox is enabled.
My problem is: when I select one of the boxes the on-screen message continuously one after the other, even when you press the OK button.
Can someone help me please?
An option button allows only a boolean in it to be active at a time. You see these things all the time. Think about a survey that only lets you select one option.
-
What is the best video card for Adobe Creative Cloud, K4000 or GTX-780ti?
Hi all
Due to the limited budget, I am looking to replace my GTX-680 with one of these cards, so here's my question...
What is the best video card for Adobe Creative Cloud, K4000 or GTX-780ti?
Thanks in advance.
Trevor Daley.
Start reading the Page Tweakers - balanced systems and then to continue reading Tweakers Page - what video card use?
-
I need to create a table of contents in iPages but I want only one word for the title, not the line of holes. Or, how can I change the contents of the table? Thank you!
Yes, you can have a one word title, by assigning a paragraph style title to this one word. No, you cannot change the text in a Table of contents, but you can change paragraph style font attributes (line) and add for example, a head of points between the types of OCD paragraph and page numbers. No part of the table of contents will not provide hyperlinks in exported PDF documents.
When you look up in the menu bar, you can see the word iPages, or simply Pages. There is no product of iPages.
-
This problem deals with only one of my user accounts, where the user accounts function correctly. When my wife logs in to his user account, it receives the error "windows Explorer has encountered a problem and needs to close, sorry for the inconvenience." No ICONS or deskbar charge upward; However, my daughter and my user account functions properly.
I did a system successfully restore to a previous point, but the problem remains.
If you are still having problems with Windows Explorer crashing, I suggest to consider the suggestion offered by ShadowKat:
"Hello people, it seems that some guys out there are still having trouble with this random crashes. I have the same problem, except that it happens every time that I go to my media files on my NAS. It seems that there is a bug or something with windows that causes this problem when you access a folder to storage media like mine, especially when the size of the file is very large (archive all my discs of film there for convenience and continuous =), about 1 TB of data). Windows capable of generating thumbnail images for your files and blocks the Explorer as well.
I solved this by going to my computer > click the "Organize" (upper-left) > folder and search options > view tab check "Show icons, never thumbnails" option and uncheck the "display file on the photos." This prevents windows to generate images and solved the problem for me. Less visually flashy Yes, but at least not need a cloth and restart is).I hope this helps and good luck!ShadowKat. »If you're still having problems after this, I suggest that to start a new thread in the following location:I hope this helps. -
Only one speaker (for both) to work (after checking the FAQ)
Hello
I have an inspiron N5110 R15 3 years now, a few days ago one of the speakers stopped working. When I do a test of stereo sound, the left speaker (the one that always works) its left AND RIGHT sample tones. so I figure this is on some kind of maybe Mono?
-When I plug the headphones I have the sound on both sides.
So far, I have tried
1 reset
2 tried update driver if the Device Manager
3. turn on device
4A ran the audio problems (win 7, 64 bits)
5. looked around the frequently asked questions here
* I do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops. you are the experts, so I'll gladly do if you say.
current driver is manufactor (IDT high definition...)
Thank you in advance.
Another test, that you can run is ePSA Audio Quick Check. Note that not all ePSA and ePSA models do not all control by Audio fast. If you do not then just fail the color bar test as described in the FAQ. If you hear tones in the two speakers at the trials then the speaker itself is good and another part is the cause of the problem, probably the socket for headphones, since you know the audio working properly up to this day.
If you hear only tones in one speaker and the other speaker is confirmed then failing or has a bad connection.
The final test you can do is to perform a System Recovery. If it's a software problem then recovery will fix the problem and if it is material, then it will be no and hardware will be confirmed as the source of the problem. But no point in doing so, if only one speaker is heard in the previous test...
icecoldnineI do not uninstall the driver and downloaded a new because it seems strange to be the issue, after working for 3 years and all of a sudden it stops.You need not to do because you tried the native driver which served the same purpose. A simple re-installation of the audio driver (no download) is that your settings will be lost - in other words, the default configuration is restored thus exclude a problem of configuration, such as defined as mono in the sound properties.
If you want to check this, open the playback of the sound properties, right click on the speaker/headphones, select Properties, click the levels tab, click the Balance button. It does not matter how cursors are defined so that they are both the same level of the dB.
Download a new copy of the pilot aims to eliminate corruption from the existing driver. Sometimes, they stop everything works correctly.
-
Traffic permitted only one-way for VPN-connected computers
Hello
I currently have an ASA 5505. I put up as a remote SSL VPN access. My computers can connect to the VPN very well. They just cannot access the internal network (192.168.250.0). They cannot ping the inside interface of the ASA, nor any of the machines. It seems that all traffic is blocked for them. The strange thing is that when someone is connected to the VPN, I can ping this ASA VPN connection machine and other machines inside the LAN. It seems that the traffic allows only one way. I messed up with ACL with nothing doesn't. Any suggestions please?
Pool DHCP-192.168.250.20 - 50--> for LAN
Pool VPN: 192.168.250.100 and 192.168.250.101
Outside interface to get the modem DHCP
The inside interface: 192.168.1.1
Courses Running Config:
: Saved
:
ASA Version 8.2 (5)
!
hostname HardmanASA
activate the password # encrypted
passwd # encrypted
names of
!
interface Ethernet0/0
switchport access vlan 20
!
interface Ethernet0/1
switchport access vlan 10
!
interface Ethernet0/2
switchport access vlan 10
!
interface Ethernet0/3
Shutdown
!
interface Ethernet0/4
Shutdown
!
interface Ethernet0/5
Shutdown
!
interface Ethernet0/6
Shutdown
!
interface Ethernet0/7
switchport access vlan 10
!
interface Vlan1
No nameif
no level of security
no ip address
!
interface Vlan10
nameif inside
security-level 100
IP 192.168.250.1 255.255.255.0
!
interface Vlan20
nameif outside
security-level 0
IP address dhcp setroute
!
passive FTP mode
DNS lookup field inside
DNS domain-lookup outside
pager lines 24
Within 1500 MTU
Outside 1500 MTU
mask 192.168.250.100 - 192.168.250.101 255.255.255.0 IP local pool VPN_Pool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
Global interface 10 (external)
NAT (inside) 10 192.168.250.0 255.255.255.0
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
Enable http server
http 192.168.250.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Telnet timeout 5
SSH 192.168.250.0 255.255.255.0 inside
SSH timeout 5
SSH version 2
Console timeout 0
dhcpd dns 8.8.8.8
!
dhcpd address 192.168.250.20 - 192.168.250.50 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
SVC disk0:/anyconnect-macosx-i386-2.5.2014-k9.pkg 2 image
Picture disk0:/anyconnect-linux-2.5.2014-k9.pkg 3 SVC
enable SVC
tunnel-group-list activate
attributes of Group Policy DfltGrpPolicy
value of server DNS 8.8.8.8
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
tunnel-group AnyConnect type remote access
tunnel-group AnyConnect General attributes
address pool VPN_Pool
tunnel-group AnyConnect webvpn-attributes
enable AnyConnect group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:30fadff4b400e42e73e17167828e046f
: end
Hello
No worries
As we change the config I would do as well as possible.
First, it is strongly recommended to use a different range of IP addresses for VPN clients and the internal network
No VPN_Pool 192.168.250.100 - 192.168.250.101 255.255.255.0 ip local pool mask
mask 192.168.251.100 - 192.168.251.101 255.255.255.0 IP local pool VPN_Pool
NAT_0 ip 192.168.250.0 access list allow 255.255.255.0 192.168.251.0 255.255.255.0
NAT (inside) 0-list of access NAT_0
Then give it a try and it work note this post hehe
-
I have 3 radio button options to choose, but I want only a certain one for calculating sales tax. How can I assign a calculation to an option button?
Ok. Let's say the name of the radio button group is "Radio1", the value of exports in this field is '3', the name of the subtotal is "Subtotal" and tax rate is 16%. You can use this code as the custom calculation of the tax field script:
Event.Value = (this.getField("Radio1").valueAsString == "3")? Number (this.getField("Subtotal").valueAsString) * 0.16: 0;
-
Can I find out if I had to buy the Adobe Creative Suite 6 Design & Web Premium, but I subscribed to photography CC for only one month plans, can I unsubscribe it and use the one bought instead?
I subscribed to the creative cloud only because I did not know that my College courses will be using other software too.
I hope to unsubscribe to the creative Cloud version and use the purchased instead.
But if it is not possible, I'll just use the CC version for this year and use the one bought on my other PC.
Hi, NGOs,
Yes, if you intend to use CS6, you can still use it after the cancellation of the plan of the CC photography, you can also improve your plan to plan photography to Creative Cloud applications
If you wish to cancel your plan well photography please contact support by calling/chat for cancellation requests and billing queries:
* Be sure to stay connected with your Adobe ID before accessing the link above *.
You can also check the help below document:
https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
Please go through the Adobe - General conditions of subscription as well.
He hopes to help!
Rayyan
-
Offers for only one month?
Hello, I would like to take the offer to €199.99 VAT / month, but I have a question. I want to have this offer for only one month and thus pay only once. I'm not anywhere that the offer is only for a month and I'm afraid it is renewed at the end of the month. But I can't pay this subscription twice. Can you confirm that if I take the offer at €199 per month will be charged once? Thank you
Hello
With one month subscription, you can stop the renewal through your account page if you do not want to renew for a second month.
See cancel your membership of Stock
Thank you
Bev
-
Hello all, my first post. Would like to know how can I do a feature request regarding the way in which the actions are recorded during playback of an action. Instead of each stage of the action being recorded in history, it would be great to have the ability to save only one step of the action, such as "[name of action] Action game". THX!
After a little research, I found that you can do what you want with the scripts. You can suspend the history using scripts. Here is an example of a script that I wrote which performs an action. It makes a loop though all the upper layers for a project of focus stacking and performs the action on each layer of dust from the sensor spot - a lot of steps in the history.
In line 9, the statement to suspend history is made. The first part of the argument: "spot", this is what appears in the State history. The second part of the argument is the function that you want to suspend the story. In this case, it is the spotD810() function. You can use this function with your actions by simply replacing the name of set of Actions and the name of the action, where he made comments in the script.
#target photoshop var doc = activeDocument; doc.activeLayer = doc.layers[0]; for(var i=0;i
-
Hello
For the moment, I work with elements 10, if I buy elements12 now to 68,88 euro
Can I install it on my pc and laptop, or only one of them?
Thank you
You are allowed to install and activate it on two machines, so you can have it on your pc and laptop. If it is a purchase of upgrade that you will need version 10 serial number to activate it on all machines that does not have 10 already installed.
-
Shoot only one email for each account
I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.Varun says:
I have a table with account, e-mail columns. Each account has five different emails. Now, I want to draw only one email for each account. One of the five e-mails for each account. Please help me with the SQL.Assuming that all of the 5 different emails are in a single column
SELECT account,email from (select Account,email,row_number() over(partition by account) rn from your table) where rn=1
Hope this helps
Kind regards
Claudy -
Is it possible to select only one column of a table for the redaction?
Hi, converted a Word doc with a table in PDF format. You will need to write a single column of the table.
Is it possible to select only one column for the redaction? When we select and drag downwards, it selects the other columns in the following lines.
With the help of Acrobat X Pro. Any help is appreciated.
Hold down the CTRL key and drag a selection.
-
Get only one line for each type of a column
Hello!
I have a little problem.
I have a table with 10 columns. One of them has repeated values. My goal is to get all the lines with this column only once for each values he holds.
Ex:
Col1 Col2 Col3
A A A A
B B B
C A C
D C D
Column 2 has repeated values. My goal is to get:
A A A A
B B B
D C D
Only once each value in column 2.
Thank you guys! ;)SQL> CREATE TABLE Tbl (col1 VARCHAR2(1),col2 VARCHAR2(1),col3 VARCHAR2(1)); Table created. SQL> INSERT INTO Tbl VALUES ('A','A','A'); 1 row created. SQL> INSERT INTO Tbl VALUES ('B','B','B'); 1 row created. SQL> INSERT INTO Tbl VALUES ('C','A','C'); 1 row created. SQL> INSERT INTO Tbl VALUES ('D','C','D'); 1 row created. SQL> commit; Commit complete. SQL> SELECT * FROM tbl t1 2 WHERE 3 rowid=(SELECT min(rowid) 4 FROM tbl t2 5 WHERE t1.col2=t2.col2); C C C - - - A A A B B B D C D SQL> SELECT * FROM tbl t1 2 WHERE 3 rowid=(SELECT max(rowid) 4 FROM tbl t2 5 WHERE t1.col2=t2.col2); C C C - - - B B B C A C D C D
Published by: Johan August 3, 2010 01:31
Maybe you are looking for
-
I want my iphone factory reset because I do not know the icloud stuff reactivation
I want to factory reset my phone because I don't know the password to my icloud to reactivate my device
-
There is no selection of bookmark organize my bookmarks menu. Help
There is no selection ", organize bookmarks' in my menu"bookmarks ". Help. Thank you.Freeden
-
6.18 crashes on Mic selection
After the upgrade to 6.18 and without other changes Skype crashes at startup. After full uninstall and reinstall I reduced to the mic input. After the failure of all Skype files and registry entries, it goes back to the default settings, which includ
-
Problem of Dock of lightning during the loading of 0%
I have a strange problem with my lightning Dock. The few times where that my iPhone is completely out of battery if I try to load it using the docking station, it keeps restarting. I tried to clean the connectors, but nothing has changed.
-
can do an upgrade of p7-1010 with a blu ray palyer writer?
I have a p7-1010 hp computer I can add a blu ray burner to my counter top?