Qual console FREE para o ESXi 4?

Similar Questions

• Console free hypervisor-based Web ESXi 5.5

  I just downloaded the free version of ESXi 5.5 to begin to evaluate against the 5.1. Reading, VMware is moving to a web console only, with the native client only for "emergency access" to the host (why everyone goes to web consoles? they tend to be more problematic than native consoles...).

  With the free version, how are you supposed to get the Web Console? It is referred to as the download saying vSphere client: "Note: vSphere Web Client can be installed using the installer of the vCenter server ', but it is not available when you sign up for the free version." So if you have the free version, which is the right way to get the web client, and what you're supposed to install on? If the web console will now be required to access the new features of the hypervisor, maybe VMware should consider providing unit vCenter with the free version, the paid options disabled, of course.

  I think that this topic is covered in the KB article:

  Changing the settings of the virtual machine fails with the error: you cannot use the vSphere client to change the settings of the virtual version 10 or higher machines (2061336)

• Errors, try to update the free version of ESXi 5.0 to 5.1

  1.) first of all, this is the command and the error I get:

  ~ # esxcli software installer--depot=/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip vib
  [MetadataDownloadError]
  Could not download zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml deposit, to jump

  (('zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml', '', "erreur fichier index.xml dele de /vmfs/volumes/DATASTORE1/patches/ESXi510-))

  (("201210001.zip: [Errno 2] no such file or directory: ' / vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip'"))
  URL = zip:/vmfs/volumes/DATASTORE1/patches/ESXi510-201210001.zip?index.xml
  Please see the log file for more details.

  2.) on the environment and Notes that relate to this issue:
  The VMwareHost is installed on a Dell PowerEdge 1900 with 16 GB of RAM. Access to the host by using the vSphere Client. I used this environment successfully for six

  months. After the update of my workstation to Windows 8 I was more able to view my virtual machines. An error message was displayed on top of the VM console

  says: ' the VMRC console has disconnected... try to reconnect. "
  An online search indicated that I needed to update ESXi 5.0 to 5.1.

  I am running:
  Version 5.0.0 of ESXi build 623860
  vSphere Client Version 5.0.0 build 623373

  (3.) I found many resources who asked how to upgrade the free version of ESXi 5.0 to 5.1

  With a free license or an evaluation, it is not allowed to download "VMware ESXi - 5.1.0 - 799733 - depot.zip.
  However, by going to this site: http://www.vmware.com/patchmgr/download.portal
  I can download build 838463 as described in the paragraph below of this page/site http://www.vladan.fr/esxi-free-how-to-upgrade-to-esxi-5-1/

  "UPDATE: If you want to upgrade to the latest ESXi 5.1 (build 838463), you should see this article: VMware ESXi 5.1, Patch version ESXi510-201210001 and get it."

  file ESXi510 - 201210001.zip, from the VMware download page. »

  This page/site explains how to apply the patch
  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

  4.) I connect to the host using PuTTY. Here's the session info:
  

  Using the user name "root".
  Keyboard-interactive authentication.
  Password:
  The time and date of this connection have been sent in the system logs.

  VMware offers support, powerful system administration tools.  Please
  See www.vmware.com/go/sysadmintools for more details.

  ESXi shell can be disabled by an administrative user. See the
  vSphere documentation security for more information.
  ~ #

  5.) I then download this file downloaded on the host at the following address
  /vmfs/volumes/datastore1/patches/ESXi510-201210001.zip

  (6.) to check... I am able to list the contents of the repository with the following command:

  ~ esxcli # sources vib liste--depot=/vmfs/volumes/datastore1/patches/ESXi510-201210001.zip software | more
  Name Version Release Date acceptance level provider status
  -----------------------------  ----------------------------------  ------  ------------  ----------------  ------
  Update SCSI-bnx2i 1.9.1d.v50.1 - 5vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  updated sata-sata-promise 2: 12 - 3vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  updated net-sky2 1: 20 - 2vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified
  ESX-base 5.1.0 - 0.5.838463 VMware 2012-09-12 VMwareCertified update
  5.1.0 - 0.0.799733 of xserver-ESX VMware 2012 - 08 - 02 new VMwareCertified
  Misc-cnic-register 1, 1 - 1vmw.510.0.0.799733 VMware 2012-08-02 VMwareCertified update
  ...
  ...
  ...

  7.) when I try to run the install command I get the error stated at the top of this post. How do I update my

  If you don't have access to the repository offline package and the method of installation CD interactive is not what you want, you can take a look at for example http://www.virtuallyghetto.com/2012/09/a-pretty-cool-method-of-upgrading-to.html (and the links in the blog post) to see how you can upgrade.

  André

• Help - what is and what is not available in free version of ESXi 3.5 U4?  VIMA?  VI Toolkit?

  Hello

  I'll try to find a (web page perhaps) summary of what is and especially what is NOT available in free version of ESXi 3.5 Embedded U4.

  Like many people I guess, I spent hours looking for a way to perform certain operations on virtual disks, to see that these operations have been banned in the free version of ESXi 3.5 U4.  It is reasonable, after all, if someone gives you a horse, don't look in his mouth!  But while I'm happy to be an ESXi 'amateur' to a certain extent, I'm starting to feel like a pirate, and I'm doing this a bit more productive experience.  Here's what I found so far:

  -Some of the most useful features in VMware Tools (such as 'narrowing of the virtual disks') seem to have no useful effect in ESXi 3.5 U4 Embedded free version

  -L' operation-e vmkfstools.pl RCLI to rename the virtual disk (moving) and the i - operation to clone (copy / import / export) a virtual disk seem to be disabled (due to lack of return. RestrictedVersion.summary)

  -vim - cmd does not provide what be good beyond what you can do in VI Client

  In particular, can someone tell me if it is interesting to study the following, that is I'll be able to do anything discs at all useful to the virtual with them in ESXi 3.5 U4 Embedded free version:

  -VIMA

  -VI Toolkit (for Windows)

  Thanks for any help/pointers.

  Take a look at this article: http://vmetc.com/2009/03/31/esxi-u4-ends-free-version-read-and-write-access-from-the-rcli/, it should provide general information on the ESXi set and the problem of read-only.

  As ESXi never was intended to provide full access to the VI API, you get what you pay for and in this case, you use the free version so that you can accomplish all of these tasks with the VI Client, if you want more, you'll have to pay for it.

  So first off, vim-cmd is only available with the unsuppoted SSH console and you can probably do most of the basic tasks through some scripted as a shell script automation, also in the console Busybox unsupported, you have full access to the very familiar vmkfstools. Now, you mention vmkfstools.pl is the remote version of the tool, because it is not available by default with ESXi (as the console does not support is not supported by VMware). To manage and configure your remote host ESX and ESXi, vCLI was created that replicates most of the popular esxcfg-* commands that use the API of VI

  This VI API is not free, you have full read access but if you want to set up/perform all operations that aren't will not be played, then you will need to have a license appropriate and which is at the Foundation or higher. The API is exposed as WSDL/SOAP and there are various scripts/languages with links that hang in the VI API to provide a level of abstractions for programmers, administrators, some of these languages include Microsoft Powershell, Perl, c#, Java, etc.

  PowerCLI (officially VI Toolkit Windows) is such a link that uses the VI API, i.e. to use it you will need to have the appropriate permit to change the configuration of other you will have only read access, it's similar to Perl called vSphere SDK for Perl bindings. So, if you're going to explore other routes, you will always encounter the same fundamental question.

  Okay, vMA (officially VIMA) is just a VAPP VMware RHEL that provides administrators a way to centrally manage / to distance your servers ESX/ESXi and vCenter. It comes by default with the vSphere THAT SDK Perl and a few other utilities to help manage/configure your systems and once again they depend on the VI API which access set based on the licenses that you have on your hosts.

  So all the options are options, but you need to know if you are going to get a license, because without the most basic, you will not be able to use one of these toolkits. Note that the license NOT only does full read/write access to the API but other features depending on the license you buy.

  There are other tools that provides VMware which, for now, temporarily has functions of management for virtual machines ONLY, this may change in the near future but take a look at this thread for more information post: is not happy with lockdown 3.5u4 VI API/RCLI ESXi? Worry not, VMware VIX to the rescue... for now =)

  I hope that this clears up everything.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  VMware Code Central - Scripts/code samples for developers and administrators

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• Free license for Esxi 6.0 Cisco custom ISO

  Dear all,

  Is it possible to get the free license for Esxi 6.0 custom cisco ISO? or what can I use standard 6.0 for Cisco 6.0installation custom Esxi Esxi free license key?

  I could find the free license only for Esxi 6.0 standard image customized Cisco.

  Thank you.

  Welcome to the community,

  Cisco and other hardware providers offer ESXi images customized to support their equipment. However, the customization is made by adding/replacement drivers and tools. The base is still the same original VMware image. There is no specific license provider.

  André

• The free version of ESXi 4.0 is that it certified EAL4?

  Hi all

  I installed the free version of ESXI 4.0 on server Fujutsu S300, I want to know that the free version of ESXi 4.0 is certified EAL4 or not.

  and I need to see the difference between the free version and the retail version.

  Thank you

  -Anwar

  AnwarBenfredj wrote:

  .. do you have a link explaining that the free version of ESXI4.0 is certified EAL4?

  have you seen the blog below. If free or paid, the hypervisor is the same.  Licenensig unlocks / locks features, no security.

  http://blogs.VMware.com/security/2010/11/VMware-vSphere-V40-earns-common-criteria-EAL4-certification.html

• Drive Thin provisioning of support in the free version of ESXi 4.1

  Hello!

  Drive thin provisioning is supported in the free version of ESXi 4.1?

  Concerning

  YES

• Free version of ESXi 4.1 CPU with 8 cores

  Hello

  I would like some advice on the question of whether the free version of ESXi 4.1 supports servers with 4 CPU core CPU 8, because I find some contradictory documents on some he said supports only 6 core CPU and not 8. Can someone advise or confirm.

  I think the EULA may need to be clarified.  If we ignore free ESXi for awhile, this document - https://www.vmware.com/download/eula/multicore.html - suggests that it's OK to run vSphere Standard for example on processors with 12 cores.   I only give 2 CPUs per physical CPU licenses as each license would cover only 6 of the 12 hearts.  Here is the example that includes the document

  > Example: A customer has already purchased vSphere Enterprise license. Remember that each license of vSphere Enterprise can be deployed on a > processor with up to 6 cores. However, the customer now wants to use these licenses on a newly acquired server with processor with 12 cores. > The client has two options:

  > Upgrade from the company of vSphere vSphere Enterprise Plus license, which provides a right to 12 strands and extra GOLD

  > 2 two vSphere Enterprise licenses for each processor with 12 cores.

  It would not appear that vSphere 6 basic editions are hard coded to ignore carrots on it 6 but rather you must just the correct license in place.  With ESXi free since you can register an unlimited number (99 I think?)  processors and in essense, you have enough licenses processors to double for each physical processor.  It would not be what they want and it can be "fixed" in the future, but I'm not sure it would be a EULA violation vSphere.  The doc covers products 'vSphere '.

  This affect which products VMware?

  > This strategy affects the VMware vSphere products i.e. vSphere Essentials, vSphere Essentials Plus, vSphere Standard, Enterprise vSphere, vSphere > advanced and vSphere Enterprise Plus

  so maybe they need to clarify their position for free ESXi.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Gostaria of saber como uma imagem deuma Máquina virtual passar para dentro esxi.

  Own uma Máquina com o esxi4 wont, peguei uma imagem uma Máquina virtual para testar, gostaria of saber como passar essa imagem para dentro esxi?

  Xompxomp, if you want to import a virtual machine in your esx server if it has been created on vmware workstation or another vmware solution, you can still use VMware converter, and also using vmware converter, you can import a physical machine in your esxi system.

  http://www.VMware.com/products/converter/

  If you want that I help you in Spanish I will do without any problem, but I do not speak Portuguese

  Kind regards.

  If you find this information useful, please give points to "correct" / "useful."

  My blog virtualizacion you en idioma

• Free version of ESXi can support for configuration of start and stop virtual machines via vSphere Client?

  I have read and found some documents on ESXi.

  According to the documents, I know that ESXi free version does not support some advanced virtual machine configurations and does not support write to ESXi host permission. But when I download ESXi from vmware.com, I can't find the free version. He will always be a trial of the licensed version edition because I can always do the configuration of start and stop virtual machines via vSphere Client installation. I can also run scripts (lamw) pl in vMA to stop the ESXi host (authorization to write ok?)

  Then I confused. How can I get the really free version of ESXi? Or will the free version after 60 days of evaluation?

  Start/stop above configuration is in vSphere Client via 'Configuration'-> "start/stop VM"-> "Properties"... «-> "Allow the virtual computers start and stop automatically with the system" actions setting and stop virtual machines can be configured to "comments"turn off computer"or"Suspend".» Can any body tell me if it's supported by ESXi free edition?

  Is the free version of vSphere Client too? Because when I use the vSphere Client, he told me that I have 60 days of evaluation. This confused me again. I think that vSphere Client is always free, am I right?

  Any suggestion or advice is much appreciated.  ^_

  Micky

  Configuration of start and stop virtual machines is available with the free version and licensed, with the free version you would be configured everything via vSphere Client, where as with a licensed version, you can optionally use scripts to configure it and also issue restarts/stops using scripts.

  Second, shutdownHostViaSOAPAPICall.pl for the version licensed and free of ESX (i), this script will work in both free and licensed because it uses direct SOAP calls emulating the vSphere Client communication. Take a look at the documentation for details, but this of course is not supported by VMware.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Should what Management Interface I use for the free version of ESXi

  I plan on the implementation of the free version of ESXi on a server with Intel VT technology.

  I have a management interface for my free version of ESXi.

  I was told by someone that I need to manage VSphere.

  I can just purchse VSphere and should be fully compatible with the free ESXi?

  If so, should what version of VSphere I buy?

  What are my alternatives to a manageable GUI that won't cost too much? (I intend to manage only 5 virtual machines on the ESXi server)

  Thanks in advance!

  When you download the VI client from the http:// you the Virtual Infrastructure Client GUI.  Not a powershell environment.  See attached screenshot.

• Console Web Access in ESXi 4 free

  All the morning

  I was wondering if anyone had found how to activate meanings, because it would be very convenient for something I'm working at the moment.

  Unfortunately my budget does not extend to $800 for a standard 1 - CPU license

  Thanks in advance,

  You have no web access, but you can configure the beta Mobile Web VM. Not only you can get web access, but you can get access on phone browser enabled. You can do most of the things in this snapshot of start - stop - customer (not created)

  You can get access to different virtual machines via VNC (enough to get the BIOS settings) or you can use the web plugin for VMware server. VMRC?. exe

• How can I obtain a license for the free version of ESXi?

  Where can I obtain a license for the free version? I installed ESXi 6 and it asks me to enter a license key.

  I tried to follow these instructions , but I don't see the option for requestion a license for my type of installation.

  That's what I'm running: VMware-VMvisor-Installer-6.0.0-2494585.x86_64-Dell_Customized-A00.iso

  
  Thank you.

  You can get the license of VMware site as described on the blog post that you posted above, because there is no different license for OEM ISOs.

• VMware-viclient-all - 6.0.0 - 3016447.exe broke Console hosts 6.0 ESXi and ESXi 5.5

  Installed VMware-viclient-all - 6.0.0 - 3016447.exe and he broke the Console: could not resolve ENGINE_load_aesni: 127

  Uninstalled and installed more old VMware-viclient-all - 6.0.0 - 2741530.exe, still the same error.

  Loaded procexp and found it to be the launch:

  C:\Program Files (x 86) Remote Console Plug-ins 5.5\Internet Explorer\vmware \Common Files\VMware\VMware - vmrc.exe

  When connecting to the host ESXi 6.0

  Attempts to connect to a host ESXi 5.5, same error, console does not load.

  Finally, connected to the ESX 5.0 and everything works because he throws a VMRC plug-in different VMware.

  Having no host 5.1 to test.

  
  Everything worked up to this that VMware-viclient-all - 6.0.0 - 3016447 has been installed.

  This processor also has instruction AESNI (Ivy Bridge)

  I just found out that the culprit is Workstation 10.e.x.p. beta now the Console version to 10!

  that is the vi-client installer is not overwrite all of the files in c:\Program Files (x 86) Remote Console Plug-in files 5.5\ \Common Files\VMware\VMware because the version is a is 9.0 and less than 10.

  The problem seems to be that many applications use the same folder c:\Program Files (x 86) \Common Files\VMware\VMware Remote Console Plug-in 5.5.

  And the uninstall program does not uninstall because it is shared by workstation.

  If you rename or delete the folder c:\Program Files (x 86) \Common Files\VMware\VMware Remote Console Plug-ins 5.5\ and then uninstall and reinstall VMware-viclient-all - 6.0.0 - 3016447.exe it works and install version 9.

  The latest version of the client is so 10 Workstaiton beta exposure, and nothing has updated the folder c:\Program Files (x 86) \Common Files\VMware\VMware Remote Console Plug-ins 5.5\ since it was installed.

  This is a problem if you do not install the vi client on a clean system, I think he needs a caveat in the installation process.

• Free version of ESXi: characteristics and limitation

  I am looking for a document that describes what can be done using the free ESXi 5.5 standalone version.

  • How physucal CPU are supported?
  • The amount of memory?
  • How many virtual machines?
  • ...

  Concerning

  Marius

  Take a look at free virtualization with VMware vSphere Hypervisor (ESXi) | United States