Queries on the mappings of DRM members
Hi all
Please advise on the below.
How is it possible to map a member in a hierarchy to a member in another hierarchy for example.
Target source hierarchy member hierarchy member
10000007 20000004
10000008 20000004
10000009 20000005
And assuming I want my mapping only at the level of the leaf of the members and not to the next level.
If possible, then please let know us the way forward also, I want to know if it is possible if my source and target hierarchy is to different versions.
Based on your requirement, as one or one - many or several - several maps, you can create an Associated node/nodes/Associated Group Associated data type property.
To limit only to the members of the journal, you can have a top validation that checks the node of sheet or not.
Tags: Business Intelligence
Similar Questions
-
Original title: Windows Media Player Security Upgrade
Recently, I tried to download an Audio Book using Overdrive Media Console software.
Within this program, I tried to use the 'Windows Media Player Security Upgrade'
However, this tool has produced a message "this is a problem in retrieving the machine ID DRM. Contact Microsoft product
supported". I tried to find the appropriate place to make the recommended contact. These research "Genuine Microsoft - Site diagnostic" quoted me the button solve led me to "Microsoft Software plug-in for your Mozilla FireFox browser. However downloading and running that plugin has not helped solve the problem!I use XP Home Sp3 and Media player 11.0.5721.5280
Can anyone suggest a solution?
Thanks in advance.
Antoine in TN
Do you mean the Update button?
You can try to reset the DRM system, by following the instructions at http://support.microsoft.com/kb/929642 .
Tim Baets
http://www.BM-productions.TK -
DRM - failed to start the Service Local DRM error "access denied."
Hello, I am a newbie of base to the use of DRM. On my pc WIN personal 8.1, I updated to version 11.1.2.3 DRM. The DRM 11.1.2.2 version has been downloaded yesterday and the Local Service of the DRM has been able to start without problem. However, after update today, I am unable to start the Local DRM Service due to an "access denied" error. Any pointers/tips on how to fix? I'm sure it's an easy resolution but I have searched the internet / this blog/documentation without success. Thank you for your time and please let me know if you need additional information.
Kind regards.
Understand my own question. When I ran the installer, logged as an administrator does not cause the installer must be run with administrator privileges. I must explicitly run it as an administrator. Rookie and DRM error error disappears once the installation has been completed.
-
How to get all of the mappings from an interface in excellent sheet
Hi all
My requirement is to get all the mappings of an interface in excellent sheet. Is there any out of the box application for the information in excel worksheet if it is there any ODI SDK to get the mappings as well as we have a writing a java class to implement the functionality.
appreciate your help, thanks in advance.
Gael K
07702262888
Hi GG,.
I agree with Saran, you can create a normal display and the display in the package of odiSQLUnload tool you can fill data in excel sheet
Try this
Kind regards
Phanikanth
-
Passing in the form of data members in the business rules page
Hello
I explored features of calculation Manager and how variables are handled in Hyperion Planning 11.1.2.3. I created 5 global variables that must be spent by a members of page of form data, but when I press save button that triggers the recording on / used members page / quick cache, a command prompt opens with the Member of default variables. How can I make the page members to BR? Should be pretty simple, but could not find the problem so far.
Thank you
Try selecting 'Member' instead of 'members' in the variable of calculation.
Kind regards
Altair
-
Erase data with the exception of some members
I need to erase all the members with the exception of some census... He seems to have gotten it worked but I did not understand why an approach worked and the other didn't. Can someone pls help me understand?
First I tried to use exclude... EndExclude, but it did not work.
DIFFICULTY ("one month", "a scenario",@IDESCENDANTS ("census"))
EXCLUDE (@CHILDREN ("a country with about 50 members"))
CLEARBLOCK ALL;
ENDEXCLUDE
ENDFIX
Then I tried to use @REMOVE and it does not help too...
FIX ("One month", "A scenario", @IDESCENDANTS ("census"), @REMOVE (@RELATIVE ('World', 0), @LIST (@RELATIVE ('a country', 0)));)
CLEARBLOCK ALL;
ENDFIX;
Then I thought that even if the script above does not work, it is not good to use @RELATIVE ('World', 0) since Dim1 has two hierarchies replacing with only shared members. I could just use the stored hierarchy of members and reduce the number of Members returned.
Then I updated the script below and it worked... I'm glad that it worked, but I don't understand why it did not work when I used the world.
DIFFICULTY ("One month", "A scenario", @IDESCENDANTS ("census"), @REMOVE (@RELATIVE ('Memorized the hierarchy of countries', 0), @LIST (@RELATIVE ('a country', 0))))
CLEARBLOCK ALL;
ENDFIX
Pls help... Thank you.There was a discussion in network54 on erasure when he shared members.
Cameron Lackpour writes a blog on the same.
Read http://www.orahyplabs.com/2012/11/share-surpises-in-essbase-part-ii-and.html (this has a link to the post of CL)
Concerning
Celvin
http://www.orahyplabs.com -
Hello
We have a fairly complex CF application we have designed over 8 years! For a long time we used a standard eclipse project to keep our code.
I use CFBuilder for a month or so now and many preferring to the CFEclipse plugin. I was perhaps more excited by the intellisence for EFA.
However store us our CFC outside the wwwroot and use maps to access. And therefore the intellisence doesn't seem to work
My dev machine is configured with running CF8 multi-instance where I run 5 CF instances. I added all the server instances but get the following messages:
[DevAdmin]: (11 / 23-05:54:02) server is available. Get the settings from the server to the server
[DevAdmin]: error (11 / 23-05:54:03) Impossible to extract the server mappings.
[DevAdmin]: error (11 / 23-05:54:03) can't get the directory of newspapers.
As I understand it, these messages have been identified as being "safe."
So I'm trying to convert the Eclipse project for a project of CFBuilder. It seems simple enough, by editing the .project file to include:
< types >
com.adobe.ide.coldfusion.projectNature < nature > < / nature >
< / natures >
There is also a file settings.xml that looks like:
<? XML version = "1.0" encoding = "UTF-8"? >
< ResourceDetails >
DevAdmin < servername > < / servername >
< LauncherName > < / LauncherName >
< ExternalBrowser > < / ExternalBrowser >
<>mappings
< / maps >
< VariableMappings >
< / VariableMappings >
< / ResourceDetails >I was desporately trying to find the pattern to fill the Mappings node, but I can't find it anywhere. Can anyone show me an example of what it should look like?
Or any other solution to get the intellisence working on CFCS?
FYI: It works very well when you use a CFCS relatively, but we qualify completely space names hence the need for mapping.
Any help would be greatly appreciated.
Thanks in advance.
ChrisHi Chris
The error your getting is harmless " [DevAdmin]: Error (11/23 at 05:54:03) Impossible to fetch Server mappings.". "" But for some reason, CFB impossible to fetch Server mappings. Make sure you activated the RDS settings at the server end and provided details of Rds in the BFC Server dialog box
Until the BFC knows the server mappings, it won't be able to resolve names of CFCS for these mappings. If your still unable to make CFB pick your mapping information, you manually change the configuration files of the server with your mapping details.
You will find server configuration file in {workspace}/.metadata\.plugins\com.adobe.ide.coldfusion.server/Servers.xml
There are XML block you will find to your server, add the mapping name and location in
Gateway C:\ColdFusion9\gateway\cfc And restart CFB. Now by attaching the server to the project (project-> properties-> ColdFusion Server-> server settings). You should be able to see the CFC in the mappings defined on the server.Thank youKiran Sakhare -
Failed to retrieve the mappings for the server. Reason: null
I get the following in the Console error when I add or update my server
[oolocal], (07 / 14 at 04:40:11): server is available. Get the settings from the server to the server
[oolocal], error, 07 / 14 at 04:40:12, impossible to fetch Server mappings. Reason: null
[oolocal], error, 07 / 14 at 04:40:12, failed to get the logs directory. Reason: nullStandalone CF8
Webroot in c:\inetpub
RDS works (so I can browse the datasource)
Kind regards
Aaron
This problem is known. Failed to retrieve the mappings for the server. Reason: null. We fix it.
Just to check the parameters are collected successfully from the server. Create the project and join the server to the same. CFM open and type
must identify the data sources. -
Is it possible to combine dynamic &; static queries in the ref cursor?
Hi all
I was wondering if it is possible to combine dynamic & static queries in the ref-cursor?
In the existing code, the two parts of the query are static, but I need to improve & replacement of part would do the trick.CREATE OR REPLACE FUNCTION dynamic_static_kk RETURN sys_refcursor AS o_cursor sys_refcursor; BEGIN open 'select 1 fom dual' union select 2 from dual; RETURN o_cursor; END;
So, I was wondering if it is possible to keep the static part 2. Of course, do both dynamic parts seems the only possible treatment for me.So, I was wondering if it is possible to keep the static part 2.
No, you can't.
Of course, do both dynamic parts seems the only possible treatment for me.
Yes, it's the only way.
-
Need to use values from the first query in other queris to the data model
Hello
Here is my requirement-
I use the data model to run multiple queries. The first query, I get 10 records. Now, I want to use these 10 records in the second query to get my final result. I am not able to use the sub query as the two motions are quite long and complex.
Select distinct Bishop of emp
Select empno, emp where Bishop in (: Bishop)
I can't use: Bishop because it will give only the last value stored at Archbishop. Is it possible to be able to use all the values from the first query in the second query using the data model?Hello
Are you sure that you have your "dataStructure" configured correctly? Try this simple example:
Hope this helps
Andy
-
A few queries on the design of PA
Hello
I'm working on a design of PA (1930-1990 MHz) 4W using Freescale LDMOS MW6S004N transistor (attached sheet). It would be very useful if someone could shed some light on the following queries;
1) I've traced the I - V curve and the Vgs as 2.77V (Vds = 28V, ID = 50mA) and biased the transistor with solenoid and BIASTEE elements to watch the gain and stability. But the gain is only around 7dB @ 1960 MHZ (while the data sheet shows a gain of 18 dB). Also, looking at the factors of stability, a MU1 MU2 is less than 0 and K<>
Yes, why is the only model not give the gain - without correspondence as other peripheral circuit?
Why is he unstable? It should be like that?
2) but when I increase the tensions of polarization, I see improving gain up to 10dB and then drop on a further increase of the voltage input/drain. So I'm not supposed to gain the necessary to the data sheet specified bias point?
3) in the datasheet, page nr.8, Zsource and Zload for the test circuit are specified for 1930, 1960 and 1990 MHz. So if I create the test as shown circuit (with input output matching and lines of bias) and make a measure of ZIN at the source and the load of the appliance, should not I should I get accurate impedances at these frequencies? This should be done in a scheme with infectious myonecrose or OMN only and without the device?
4) should I see the exact data sheet specified impedance if I do a pull source or load pull in the original circuit using LTUNER elements?
5) , How can I specify the magnitude and angle in the LTUNER element when I have a point of impedance in R + jX format? I have attached a screenshot of an example of AWR tutorial, but I don't see how the conversion was performed at mag
Pointers to these queries will help a lot! Thanks in advance.
1 & 2. It is a power FET; It has a very low output impedance; the datasheet shows the production capacity is 25pF. If so, I don't see how you get the desired gain when he puts an end to the output of 50 ohms. In addition, the specification of gain run 4W on. Look at an angle specified as class AB, so the small gain may not match upward with specifications, either.
3. If you build the circuit as described, I think lets you get results close to those that they specify. You can join the project?
4. you can ask Freescale, but my guess is that nothing will be exact. Follow patterns of the specific formulas, and despite the flexibility permitted by the various parameters on a FET, it is difficult to get behavior exactly measured in all conditions.
5. LTUNER is probably not the right choice, if you plan to do harmonic analysis balance; HBTUNER may be preferable because it allows to bypass the harmonics and send power to the rear. You can reduce the number of items in your base using HBTUNER2test circuit, which has built-in te through. If you double-click on one any of these elements of tuner, you will see the description of the Mag and Ang parameters, which States that they are for Gamma. So write some equations and convert z to gamma. The AWR design environment allows to describe the functions and can handle complex variables. For example, see the image as an attachment.
-
How to stop the mail sent to members of my list of contacts from my hotmail account
The mail is sent from my account to members of my list of contacts, how can I stop this
Hi KlineJerry,
I suggest that you post your question on the Forums of Windows Live for a better answer to this question. It is a forum for any questions related to Hotmail.
http://www.windowslivehelp.com/product.aspx?ProductID=1
With regard to:
Samhrutha G S - Microsoft technical support.
-
the upgrade button would light up to go to the site because it says that there is an error... How can I get the appropriate upgrade 11 media to block the protection of licenses on those files that have built in accept them
Hello Gmirecords,
Thank you for your message. Please try the link below and let us know if the button to update this site is grey so.If the upgrade button is always grayed out, please follow the steps listed in the link below.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
GETVPN and regeneration of the keys when several members of the Group leave at the same time
He did not specify how the key servers respond when several members of the group start simultaneously. For example, if 3 members leave the same group, made the key manager sends three keys (KEK, TEK) and only the last will be available for future connections? Or the key manager optimizes the regeneration of the keys and sends only a single key?
Thank you
Stone,
On himself, he is not uncertain. You can retrieve the session memory keys (not impossible but difficult).
I guess what you are looking for is a red button to clear the SAs on all devices?
In this case:
Specifically "clear members ks gdoi crypto now."
There is a particular risk that you thought?
M.
-
need help on queries of the ASO
Hi all
I'll be all right with a more help in correcting my two mdx queries as validation with no error, but unable to see my data.
Formula Member BSO:
1st formula
IF (@ISMBR ("06000", "06001", "07000", "07001"))
Mnth3Fcst-> & CurrBW;
ON THE OTHER
((& Mnth1Fcst-> «Réels») +(&Mnth2Fcst->"Actual") + (& -> Mnth3Fcst & CurrBW));
ENDIF
2nd formula
IF (@ISMBR ("06000", "06001", "07000", "07001"))
0;
ON THE OTHER
IF (@ISMBR (Q1:Q4))
@VAR ('2 + 1', & CurrBW);
ON THE OTHER
0;
ENDIF
ENDIF
ASO mdx query:
1st formula
case [accounts]. CurrentMember
When ([06000], [06001], [07000], [07001])
then ([& Mnth3Fcst], [and CurrBW])
ON THE OTHER
(([&Mnth1Fcst],actual) + ([& Mnth2Fcst], real) +([&Mnth3Fcst],[&CurrBW]))
END
2nd formula
case [accounts]. CurrentMember
When ([06000], [06001], [07000], [07001]) then 0
ON THE OTHER
case [as possible]. CurrentMember
When ([Q1], [Q2], [Q3], [Q4])
then ([2 + 1])-([& currBW])
0 otherwise
End
End
Please help me fix my two mdx formulas. Thanks in advance...
SM
Hi sm...
First of all, a trick of troubleshooting for this kind of problems - separate conditional logic to the logic of value. For example something like this:
CASE [accounts]. CurrentMember
WHEN ([06000], [06001], [07000], [07001]) THEN
1
ON THE OTHER
2
END
But in your case - I've never seen this construction before, and I do not think that it can possibly work:
CASE [accounts]. CurrentMember WHEN ([06000], [06001], [07000], [07001])
"I'd give on the use of a ' searched when clause" (see the case for an explanation simple vs sought when clauses) because it offers no advantage when you test a condition with each case only. That done, there are several ways to test "is X A, B or C one member." This is one:
CASE
WHEN contains ([accounts]. CurrentMember, {[06000], [06001,] [07000], [07001]}) THEN
...
ON THE OTHER
...
END
In short, I think you need to get replace all of your tests on the current Member (two [accounts] and [time]) with the style above the test using Contains.
Maybe you are looking for
-
HI - y at - it a command to automate the scroll for a long web page?
I have a wall of gypsum, and it would be useful to show the info if possible to automate the scroll.
-
Libretto U100: pictures are wider than they should be tightened
When viewing my photo file, all photos are wider than they should be tightened. I guess that's because the screen is a 'big screen '. Is it possible to display the photos in the normal width? Do I need to change the settings to do this? Thank you for
-
Toshiba e-studio 206 does not print USB cable
Hello! We have Toshiba e studio 206 which is installed with the usb cable.Official drivers for e-studio 206 granted official website (here and later - a Russian) had been installed without error, the device shows any errors as well and can be used as
-
LaserJet MFP M127fw Pro: Easy Scan
Hello I installed Easy Scan for my LaserJet MFP M127fw Pro on my iMac with OSX 10.11.1 and it worked fine until recently. I have not installed anything else or changed anything either, but when I run the program of the scan window does not appear and
-
Internet service from T - Mobile blackBerry Smartphones
My service is with TMobile and I have setup an internet e-mail account and recvd a message on my phone "welcome blackberry internet service account is now active." "User name XXX password: Null". That means for me? Can I access service Internet BB fr