DRM - failed to start the Service Local DRM error "access denied."

Similar Questions

• Windows search Windows failed to start the service on the Local computer

  OK, so it's a big, dirty and convoluted issue, so please bear with me. Any help is greatly appreciated! I start tearing my hair out on this one...

  I'm on Windows 7 Professional 64 bit
  UAC is set to the lowest level 2

  The other day I have problems with the search box in the start bar. It is more was to find excel or other office applications and also he wouldn't orders base as cmd or Notepad. Whenever I run a command it returns an error like this (not exact because I have the exact error message):

  Windows cannot find ': search query = cmd'
  
  I searched a little and tried to rebuild the index in Control Panel > Indexing Options. It does not work so I uninstalled Windows Search and reinstalled. What I found now, is that the indexing service would not start and if I tried manually start from services.msc I would get the following error:

  Windows search Windows failed to start the service on the Local computer
  Error 161: the specified path is not valid

  The event log showed me this Application error:

  Cannot initialize the Gatherer service.

  Details:

  The Temp folder is on a drive that is full or inaccessible. Free space on the drive or verify that you have permission write to the Temp folder. (HRESULT: 0 X 80070660) (0 x 80070660)
  

  Help!

  Thanks Samhrutha.
  Your proposed solution of editing the registry is the only solution I found to this day and still work.
  The only drawback that I want to emphasize is that this fix causes completely reset to its default settings of windows search.  Customizations to search what have been done by the user (e.g., windows search indexing user customizations options) will be lost.

  I am running Windows 7 Pro 64-bit and occasionally experienced the same error message ( windows cannot find ': search query = XXX ", where XXX corresponds to my search query) try to search through windows when start menu search box.

  Only recently, however, discovered one other cause possible/fix to this problem.
  Specifically, I discovered that the error of windows search resulting from the ADDITION of a NETWORK LOCATION on the local computer (for example, via the menu option "Add a network location" that appears when you click the file menu in a window of windows Explorer displays the contents of the local computer (corresponding to the "COMPUTER" icon). The CENTER of my computer SYNC settings have been defined to disable the synchronization of network or file 'offline' and I suspect that this setting is also part the cause of the error of research.

  To resolve this problem, simply tell windows search not to include the 'network' location in the search index.  To do this, one needs to access the settings of the windows search INDEX LOCATIONS (via Indexing Options-> change), then uncheck the box next to the network location (which on my computer starts as follows: oneindex: / / {s-1-5-21...)

  After unchecking this box, click on the OK button and then CLOSE the button to exit the Options of Index window.  After that the error message should hopefully not return.  If so, try restarting the computer and research to test again.

  Hope this helps!

  :)

  ~ rx

• DSC error: IAK_SHARED failed to start the service

  When I try to deploy a shared variable library, she fails to deploy and gives me the following message: error:-1967362042, IAK_SHARED: (Hex 0x8ABC7006) failed to start the service.  I'm using LabVIEW 8.6 with DSC 8.6.  I tried to run one of the examples (the example of the heat exchanger).  Any ideas?  I have LabVIEW 8.5 installed as well (many of my clients are still using it), and I got 8.5 installed DSC.  Shall 8.5 DSC be uninstalled everything first?

  Thank you

  Tom

  Hi Tom,

  This means that your installation is corrupted and some components SQL do not settle down with it. I would advise to uninstall completely and then put it back using the installation CD you have. I hope this helps.

  Gregory C.

• Failed to start the computer over HTTP: Error 1000

  I'm testing an upgrade from version 2.9 to 2.10 so I can upgrade our 6.0u2 ESXi hosts to solve the problem of multiple appstacks slow attachment.  However, I get this error on half of my offices.  I tried both 2012R2 and for the administration server 2008R2.  It is installed with local SQL.  Desktop computers are Windows 7, floating pool linked clone.  Looks like that in the beginning it shows a "HttpInitializeRequest: status response 200 Manager (2 bytes) ': OK ' but try again"computer startup on HTTP failed: Error 1000 ".  Once virtualization fails is disabled and no appstacks cling.

  I have logs from two desktop computers, a successful failure:

  In case of failure:

  [19:24:58.937 2016-03-25 UTC] [svservice:P828:T856] OnCreateSession called (CF 000000000036, 50, Params 0000000000F6E840, context 0000000000000000 manage the ID from Session 1)

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (Microsoft format) UUID: F6A62A42-87FE-778B-EA05-F56BBADBCD04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Computer (VMware format) UUID: 422aa6f6-fe87-8b77-ea05-f56bbadbcd04

  [19:25:01.862 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP session

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Initialize the HTTP connection

  [19:25:01.871 2016-03-25 UTC] [svservice:P828:T312] Shuffing 1 Manager (s)

  [19:25:01.892 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] Seed URL: / pre-startup? name = svservice & to uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA01 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.921 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.301 2016-03-25 UTC] [svservice:P828:T312] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.347 2016-03-25 UTC] [svservice:P828:T312] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] Computer start URL: / computer startup? name = svservice & uuid = 422aa6f6-fe87-8b77-ea05-f56bbadbcd04 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA01 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.358 2016-03-25 UTC] [svservice:P828:T312] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:30:01.666 2016-03-25 UTC] [svservice:312] WinHttpReceiveResponse the timeout of waiting for response

  [19:30:01.666 2016-03-25 UTC] [svservice:P828:T312] Retrying in 5 seconds (expected 300 seconds on 300 max)

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] Abandonment of application HTTP after having exceeded the time limit (300 seconds)

  [19:30:06.662 2016-03-25 UTC] [svservice:312] Failed to start the computer over HTTP: Error 1000

  [19:30:06.662 2016-03-25 UTC] [svservice:P828:T312] HttpComputerStartupThread: failure (starting the computer)

  Successful operation:

  [19:24:58.843 2016-03-25 UTC] [svservice:P820:T852] OnCreateSession called (Session ID 1, 00000000003CFB60, Params 0000000000F4E880 0000000000000000 context handle)

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (Microsoft format) UUID: 72F62A42-0EF6-DBCA-0BE1-DF5682A376C5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Computer (VMware format) UUID: 422af672-f60e-cadb-0be1-df5682a376c5

  [19:25:01.251 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP session

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Initialize the HTTP connection

  [19:25:01.262 2016-03-25 UTC] [svservice:P820:T560] Shuffing 1 Manager (s)

  [19:25:01.265 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] Seed URL: / pre-startup? name = svservice & to uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & to status = 0 & osver = 6.1.7601 & to sp = 1.0 & suite = 256 & product = 1 & to arch = 9 & proc = 1 & to agentver = 2.10.0.871U & area = SOCIETY & to workstation = AV210TSTPA02 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:01.584 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (2 bytes): OK

  [19:25:02.039 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  [19:25:02.161 2016-03-25 UTC] [svservice:P820:T560] IsDomainJoinedComputer: NetGetJoinInformation() success, BUSINESS domain name and type is 3

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] Computer start URL: / computer startup? name = svservice & uuid = 422af672-f60e-cadb-0be1-df5682a376c5 & status = 0 & osver = 6.1.7601 & sp = 1.0 & suite = 256 & product = 1 & arch = 9 & proc = 1 & agentver = 2.10.0.871U & area = COMPANY & workstation = AV210TSTPA02 & seed = 1 & machinesid=S-1-5-21-2909739094-3781615540-3712082287

  [19:25:02.180 2016-03-25 UTC] [svservice:P820:T560] [0] access appvtest.COMPANY.com:80 via HTTP (attempt 1)

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpReadAllAvailableData: Error 0 in WinHttpQueryDataAvailable: dwSize 0

  [19:25:03.111 2016-03-25 UTC] [svservice:P820:T560] HttpInitializeRequest: Response Manager status 200 (34 bytes): START COMPANY\AV210TSTPA02$

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] HttpComputerStartupThread: managed (starting the computer)

  [19:25:03.112 2016-03-25 UTC] [svservice:P820:T560] LogonMount: agent: 0 Manager: 0 or to attach the volumes

  Just curious, it's someone else is seeing this with 2.10 and if you have, how solve you this problem?

  If you are using some kind of power management on the VDI? It seems as if the machine is unable to reach the HTTP Appvolumes service for any reason any newspaper which shows success connects withion a fraction of a second if the server doesn't seem to be to busy.

  Maybe you try to join an appstack that has some sort of firewall inside rule?

• HP Device Manager 4.6 Installation failed: local write error - access denied

  Need help to install the management software Application computer Device Manager 4.6 HP Thinclient

  While doing the custom Setup, I got an error for the language setting. The Error Message says "local write error - access denied.

  How to solve the problem... Please help as soon as possible

  More details if you need:

  I use Windows 2008 R2 Server Operating System - 64 bit [VM]

  I use IIS 6.0 to create FTP Site

  Troubleshooting:

  I tried to install on another Virtual Machine with same Windows 2008 R2 Server Operating System - 64 Bit

  I tried to install the software several times but still facing the same problem

  Any help in this matter would be appreciated

  Kind regards

  K N R K

  Hello

  Please find the fix for the problems

  1 Please download and install HPDM 4.5 and 4.5 SP5

  2 extract HPDM 4.6

  3. start install HPDM 4.6

  a. Select custom

  b. ensure that all HPDM components are checked. Click Next.

  c. accept the default root for the master repository path, or click Browse and navigate to a specific location. Click Next.

  d. click on install. HPDM is now installed.

  e. after the HPDM update is installed, a Configuration of HPDM Wizard appears. Select your language and then click Next

  f. click Search to check the ports and then click Next.

  g. make sure that DHCP server that is not located on this computer is selected and then click Next

  hours of service under start PXE when the gateway, select No and then click Next.

  i. click on run

  j. click Finish.

  ====================================================

  Although I am an employee of HP, I speak for myself and not for HP. ===

  * Click on the star of CONGRATULATIONS on the left say "thank you."

• Cannot start the services of ICF error 1079: the account specified for this service is different from the account specified for other services running in the same process

  Original title: I'm trying to start the Windows Firewall.

  I'm trying to start Windows Firewall services, (administrative control / tools/services/windowsfirewall Panel) and error 1079: the account specified for this service is different from the account specified for other services running in the same process, rises.  What should I do?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  ·         Logged in as an administrator on the computer?

  I suggest you follow the steps mentioned below:

  Method 1:

  Follow the steps described in the following link and check if the problem persists:

  http://support.Microsoft.com/kb/2478117

  Method 2:

  If the previous step fails, run the System File Checker tool to troubleshoot missing or corrupted, system files proceed to the following link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, set the center of security and its dependencies services to run under the Local Service account. Follow these steps:

  a. Click Start, type services.msc and press to enter.

  b. double-click Security Center, click on tab log.

  c. Select "this account", click on the Browse button, type Local Service and click ok.

  Type the password and confirm the password and click ok.

• SQLFire: Failed to start and then can not close-"Access denied" & "could not start the"sqlfire"database

  I ask a question, expanding to another thread 'http://communities.vmware.com/message/1884835', on the start-up and stop SQLFire.

  My topography has four servers, two locators, and two servers (Server 2 SQLFire each) on which the database is deployed.  When you start the batch, without no history running, all right.  Adding and removing servers in the cluster, also seems to work very well.  However, when the whole of the system, its stopped by sqlf shut-down-all, it starts up, things go wrong.

  I met the same problem described by the called thread, that is, it seems to be an addiction to data - which is not resolved.  I start locators first, one at a time.  When one starts, data dependence becomes apparent.  The Locator seems to start, but the sequence goes in a loop around the data dependence.  When you try to stop the same Locator, he returned in a "stopping" State, where it does not recover.  Try a reboot, translated by [A SQLFire Locator works already in the directory "C:\SQLFire\Locator"].  The "stoppage of sqlf Locator", producing a further: "timeout for SQLFire Locator at the stop, the status is: SQLFire Locator pid: 4956 status: stop ' results; and the "sql shut-down-all:, throws a long error that includes:" java.io.FileNotFoundException: shut_down_all.log (access is denied) "and 'Could not start the 'sqlfire' database'. '.  Both of these appear to be the crux of the matter.

  I don't know what data it is dependent, because I haven't added all the data that will be persisted.  However, the system starts with default records.  I tried to check if these default disks are required, which seem not to be and I'm leaving for the partition and replication information, to read when the system starts / begins.  I can't understand why locators cannot start without the database, without any dependence on the data, and also why the system seems to require a sequence to start.  Is that not the purpose of SQLFire, i.e. a solution supporting the cross, which can be started in any sequence of old?  If an operator needs to get this bad, for a production system, should be that the entire solution be recharged from external sources, and that could take awhile.  It would seem, once the system in this state, i.e. the dog chasing its tail, he doesn't get, and I have to delete all the bookmarks and servers and launch all to reboot from external data sources.

  I'll be dilly, or is it a problem in general, experienced by others?

  I would be grateful for any comments, and if you could indicate the respective documentation, as I struggle to establish a correlation between the problems of documentation, even Google hits, when it encounters any problems with SQLFire.

  I appreciate your time and efforts.

  Hello

  I checked the docs and they are not accurate on information in Windows when using the cmd shell. The ampersand does not work correctly when called from a shell, Cygwin, or on UNIX/POSIX systems. Will get corrected.

  Please, use the start command to start in the background of a single command window / batch script:

  beginning of "locator" cmd /c sqlf locator...

  beginning of "server1" cmd /c sqlf server...

  etc.

  Add option/min to start the minimized for example windows cmd start 'locator' / min cmd /c sqlf locator beginning...

  Or launch each 'start-up of the sqlf Locator', 'sqlf-start server' etc to separate windows command prompt.

  Thank you

  Felicia

  Post edited by: SumedhWale

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Failed to start the service of bluetooth - BTTRAY ERROR stack

  BTTRAY ERROR: since I bought microsoft bluetooth notebook mouse 5000 I get this error whenever I start up my computer - anyone able to help - I'm on win 7 64 bit pro - very frustrating - I don't know yet if there is a microsoft driver problem!

  I suffered from the same problem. Yesterday, I found this site. I downloaded the software. I think it works. Try it and let me know!

  http://www.Broadcom.com/support/Bluetooth/update.php

  GL

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Unable to start the service to install under Windows 7, get the error 5 access is denied

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  I went to Serives.MSC and noticed that my Windows Installer service is not started. When I pressed 'Start' (manual, automatic and automatic (delayed start) to start the service, it said 'error 5 access is denied' I'm an administrator, but it did nothing.)

  I tried many things

  I tried 'net user administrator /active' then go to the administrator (the account) and did the same thing, but he did nothing.

  I tried to make another administrator account, and then did nothing.
  When I type "net start MSIServer" in command prompt (ran as administrator), but it says "error 5 access is denied."

  Hello

   

  Thanks for posting the question in the Microsoft Community!

   

  You cannot start the Windows Installer service and get error Error 5 access is denied.

   

  Have you tried to install or uninstall any program?

  The problem may occur may be corrupted Windows Installer engine.

   

  I suggest you follow the steps mentioned below

   

  Method 1: Re-save the installation service

   

  a. click Start, type MSIEXEC /Unregister. in the search box and press enter

  b. Click Start, type MSIEXEC / REGSERVER in the search box and press on enter.

   

  Method 2: File system (CFS) Scan Checker

   

  SFC scan will find all missing or incorrect system files and repairs them.

   

  See the site:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

   

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

   

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Windows could not start the service on the Local computer Windows event log. Windows 2008 R2 server

  When I try to start the event log service can I have on my server (Windows 2008 R2), I get the following error:

  "Windows didn't start the service on the Local computer Windows event log."

  Error 2: the system cannot find the specified file. »

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en/category/windowsserver/

• Receive automatic updates for Windows XP "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer»

  Update CPU which proved later to be bad.  Replaced by original CPU.  Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2.  Integrated Service Pack 3 which I got from the MS. site  Everything works well except for Windows Update.  The setting seem to be correct in Administrative Tools/Services.  The status of the Service is "stopped".  When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found."  Also "error 0 x 80240036: could not start the service automatic updates on local computer»  Used the range of anti-virus and malware and found nothing.  Currently using Avast 7.0.1426.  I also used various tools of Fix - It MS nothing helps.  Any help would be greatly appreciated.  Thank you.

  Hello

  1. what application or antivirus security suite is installed and your current subscription?

  2 Norton (another) or a McAfee application ever installed on this machine?

  3. What are the fix applications that you used so far to try to fix this problem?

  Try the next method and check if that helps you with the question of the 127 error you receive.

  Method 1: Rdding the DLL file by doing the following:

  1. Click Start and click Run, in the search box type CMD and press to enter.
  2. right click on CMD in the list and click "Run as Administrator".
  3. type the following command and press ENTER. Regsvr32 msvcp71.dll
  4. close the command prompt window.

  Method 2: run the file system (CFS) Checker:

  (Note: you need an XP installation disk to start the System File Checker search.)

  The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.

  1. click on start, and in the box to start, search type CMD
  2. right click on CMD in the list and click "Run as Administrator"
  3. type the following command and press ENTER. Sfc/scannow
  4. close the command prompt window.

  For more information on scan SFC (System File Checker), please look in the link mentioned below.

  http://support.Microsoft.com/kb/310747

  I hope this helps.

• Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

  Original title: Windows could not start the service of connection manager on the local computer remote access

  amplifier

  Windows could not start the service of connection manager on the local computer remote access

  Error 1068: The dependency Service or group could start.

  Hi sunelchandraoli,

  1. when exactly you receive this error?

  2. you remember to make changes to the computer before this problem?

  Step 1:

  "Make sure that all the services of the dependence of the"Remote Access Connection Manager"" are launched in the list of services...

  a. Click Start, type services.msc in the box start the search.

  b. select Services from the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  c. right click on the Remote Access Connection Manager service and then click Properties.

  d. under the general tab, click Manual next to startup type.

  e. under the general tab, click Start under the service status and then click OK.

  f. also check for long-term services.

  The dependency of 'Remote access connection manager' services include:

  i. secure Socket Tunneling Protocol Service

  II. telephone

  III. Plug-and-Play

  IV. Remote Procedure Call (RPC)

  c. of DCOM Server process Launcher

  VI RPC end point mapper.

  Make sure that the above services are started in the services list. If this is not the case, start all services above and check.

  Step 2:

  You can also try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  System Restore: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Hope this information is useful.