Quero delivered me Advisor Central as fica too perturbando
Como devo proceed para excluir o Advisor Central?
Hi JTdeBarros,
Your question seems to imply remove so-called Advisor Central (which I suppose is a program any) of your computer.
We speak only English here, but there is a Forum for answers in Portuguese Windows programs at: http://answers.microsoft.com/pt-br/windows/forum/windows_other-windows_programs?page=1&tab=all&tm=1314262670034 where you can get expert services in your language. Up, next to the Version of Windows be sure to use the drop down menu to select the appropriate operating system, then you will go on the best forum for your system.
Good luck and best wishes.
****************************************************************
Tags: Windows
Similar Questions
-
Apply transparency to letters in Illustrator
I am trying to apply transparency to the items in a logo I created. Right now, I had lettering on a layer above an opaque circle. I wish that the lettering to show through transparent rather than display them in the form of a separate color at bottom. It might help to think that the logo is an adhesive logo to be attached to a storefront window. Anything white on the logo must be cut and show through the transparent glass behind it.
I tried to use a clipping mask, but the circle disappears, and its color is applied to the registration.
Here is the logo. Help much appreciated.
JCBOSCO,
You can use a mask opacity as follows:
(1) select the letters, which can be direct or outlined letters, grouped together if more than one object, as well as the object to make it transparent
(2) in the transparency palette dialog box, click the unchecked with Clip opacity mask and invert the mask checked.
If you want the two white circles on the sides and/or white central in parts too transparent, you can just group them with the letters (whish can still be live Type) while they are also selected in 1).
You can release the opacity mask and change what you want, then reapply.
Keep the text as a direct Type gives you the opportunity to change your mind on this matter without having to start over.
-
Installation with the problem and the Advisor of support too
I was installing the Master collection 6... but four seconds before I clickd'autant to install, I realized that I didn't need an application. I tried to cancel it, but it was frozen and then I had to close this window.
Next time, I tried to install it warm me up that there is a problem and that I should install Adobe Support Advisor to fix.
Good, downloaded, installed and when I tried to open it, nothing, just cover window
Here is a picture of the window
http://Tinypic.com/r/1h6ro2/6BTW, could not find any decent for that user, sorry combat than name
Daniel.Please see for the problems with the installation logs: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
You can also try the following:
> Activate the hidden on Windows 7 Administrator account (Ref: http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-adminis trator-account-on-windows-vista / )
> Disable all non-Microsoft-start Services. (Ref: http://helpx.adobe.com/x-productkb/global/disable-startup-items-servic es - Windows.html )
> Disable all Antivirus software like Norton, McAfee etc temporarily from the computer Mc.
Reboot and install
-
To question everything
The value/Normal view headers. Press Alt or F10, if the menu bar is hidden.
-
iPhone app Messages incorrectly reports that the messages are not delivered
I send text messages with the Messages app on my iPhone. I've never had a problem until recently.
Recently, all of my text messages are marked by a red error message "not delivered". But the beneficiary is in fact receive these messages.
I want a solution to this problem (if you have one).
Here are some additional details:
* I recently made two changes to my iPhone 6, and I wonder if they are related to my problem:
1. go to iOS 9.3.5
2 change my cell number
* I have T-mobile and I "call wifi" enabled. Usually, I connect using "wifi-calling."
Hi adaviding,
Looks like you are having some incorrect Messages notifications appear on your sent messages. Not too sure if recent changes have something to do with it, but I would check your message settings to check everything is in order, it. You can also take a look at the link below. Even if your messages are sent, you can always follow the steps then the message "not delivered" can be resolved. You can also try a simple reboot of your device.
Restart your iPhone, iPad or iPod touch
If you can't send or receive messages on your iPhone, iPad or iPod touch
Please use the Apple Support communities to post your question. These measures should have your Messages app works as expected. Good day.
Thank you for using
-
Laptop HP OMEN - 15-J9K19UA: Omen Ops Central and performance HP monitor
HP Performance Advisor is part of the Suite of the Ops Central HP OMEN; Since the last update (Performace Advisor. 1.8.7826.0), it is no longer present in the suite. Is there a procedure/process to add later in the Ops Central?
Hi D5GR
Thanks for the reply.
Analyzer Performance HP automatically updated on execution and do not seem to have a setting to disable the upgrade.
For this reason, restoration is not an option, it would just upgrade on the first run.
Also, I don't see the problem here as being the performance Analyzer, but subsequently OMEN Ops Central. The configuration file now points to the wrong directory for the advisor.exe. Why the config is not editable by the end user? Or the continuation of the Ops Central needs a config file to reflect the new location.
Center Ops Suite config
LNK0018 = c: Program Files (x 86) \Hewlett-Packard\HP Performance Advisor\Advisor.exe
APP0018 = HP Performance Advisor
ARG0018 =
ICO0018 = c: Program Files (x 86) \Hewlett-Packard\HP Performance Advisor\Advisor.exe
TIP0018 = Item0318
RPL0018 =Actual location now of performance monitor
C:\Program Files (x 86) \Hp\HP Performance Advisor\Advisor.exe
Update 09/07/15:
I actually solved this first remove the attrbute the Hewlett-Packard folder read-only, and copy the complete HP Performance Advisor file from the HP folder to this location. The icon shows now and the app works very well from there.
-
Slate 7: common and other: too small text size
When you use the "common" applications and during exploration down in an article, it cannot be read as the text size is too small. It cannot be expanded. (same behavior for example, OneNote apps). The mentioned applications work fine on my Samsung tab and also on my Nexus phone.
Build v1.05.7_user was delivered this morning on my slate GREY 7
-
Can I use Express Media Player on Satellite Pro M70 delivered without it?
Hello world
I have a portable Satellite Pro M70 which has not been installed with Express Media Player. In addition, my recovery CD too are not the Express Media Player software on it. Is there a way I can download this Express Media Player and even install on my laptop. If so can someone let me have this link download and any other procedure for doing the same thing.
Thank you
MarziI put t agree with the user above.
Microsoft Windows player is not the same as the Express Media Player, which is sometimes delivered with Toshiba laptops.
As far as I know, this software cannot be downloaded and it s version an OEM if it s preinstalled on your laptop.
In this forum, you will find some comments on this topic.
To my knowledge, you cannot obtain and order the CD of Express Media Player if this application has not been delivered with your laptop.Unfortunately, nothing to do.
-
Need info on the recovery disks delivered for Satellite Pro M35
I need to wipe the hard drive on my M35 Pro sitting that the machine runs too slow now.
700 MB of RAM but not good.I found my recovery disk but worry as it is said 1/2 which implies that it is the first of the 2 discs.
Is this the case?I have the disk tools and utilities, is considered to be disc 2?
Is there a way to make it past disc 2 or downloading if it is the case that I don't have?
Thanks to all who helpPaul
Hello
As far as I know older Toshiba laptops have been delivered with the Toshiba Recovery CD and the CD tools & utilities.
Due to the size of the image large image was installed on 2 s recovery CD
All CD s are marked and it should be easy to recognize the good CD!It seems that you've lost the first game of the s recovery CD and that is why I would recommend contacting the Toshiba authorized service partner in your country and order the first recovery CD!
It s should not be expensive ;)Good luck
-
Qosmio G20-102 (PQG20): Vista Upgrade Advisor says I need updated drivers
My Windows Vista Upgrade Advisor says I need a few following things,
-These issues of device for Windows Vista-
See the following table for the device problems you should be directed to ensure that they work properly with Windows Vista> ACPI Bluetooth Toshiba
-Cannot find information about these-(même si elle dit que ces dispositifs peuvent être mis à jour après la mise à niveau vers Vista, je ne veux pas risquer quoi que ce soit.) devices
> TOSHIBA RAID virtual device
> Compatible TOSHIBA ACPI value-added device to use general and logical
> Bluetooth RFCOMM
> Texas Instruments PCIxx21 Integrated FlashMedia Controller
-These issues of program for Windows Vista-
See the following table for the program issues that you should address to make sure that they work properly with Windows Vista.> (Not very important, the rest are tho) sonic DLA
> Alps Pointing - device Driver (is it not the touchpad?)
> TOSHIBA utilities
> Microsoft Interactive training (Don; t know what it is...)
Thank you in advance for your help, I tried to search the Download Center of Tishiba for some updates, but none of them are very recent.
You are right. Section Toshiba download drivers are not yet available. Unfortunately, no one knows how long it takes for them, but if your device is delivered as Vista capable laptop computer will be certainly supported for Windows Vista.
-
2309 m too big monitors for Native resolution screen.
I have Windows 7 Home Premium on the Aspire m7811A PC (x 64). When I use my hdmi cable with my monitor and change the screen resolution to the recommended setting, which is 1920 x 1080 to 60htz, the Office extends too far, and I see all the stuff on the screen. I have to keep the resolution 1680 x 1050, so it can't. What can I do to fix this? I also have the latest player of my monitor.
These are my pc specs
Operating system
MS Windows 7 Home Premium 64-bit
CENTRAL PROCESSING UNIT
Intel Core i7 860 at 2.80 GHz 27 ° C
Lynnfield 45nm technology
RAM
8.0 GB Dual-Channel DDR3 @ 657 MHz (9-9-9-24)
Motherboard
Acer H57M01 (CPU 1)
Graphics
HP 2309 @ 1680 x 1050
ATI Radeon HD 5770
Hard drives
977 GB Western Digital WDC WD10EADS-22M2B0 (SCSI)
Optical drives
HL-DT-ST DVDRAM GH41N
Audio
Realtek High Definition AudioGo to the menu of the monitor and do a reset. Try thelatest driver of monitor and thelatest ATI video card driver.
Do you use a right HDMI to HDMI without adapters?
-
HP Advisor version 3.2 for windows 7
I have a HP Pavilion a6234x desktop computer and a Pavilion Elite m9040n and have just upgraded to Windows 7 from Windows Vista.
Both have HP Advisor version 3.1 and it shows that I have no virus protection, even if I have Microsoft Security Essentials running on both computers.
I understand that there is a HP Advisor version 3.2 for windows 7 can someone tell me how/where to download Version 3.2?
Thank you
Jessie
The last HP Advisor application Version: 3.3.12286 can be downloaded from the following link:
FTP://ftp.HP.com/pub/softlib/software11/COL34630/PV-85800-1/sp46210.exe
But to my knowledge, it too does not recognize Microsoft Security Essentials. I suggest that you skip the part HP Advisor antivirus.
-
FSX on Windows7 causing lack of delivered colors
FSX on windows 7 external causes colors delivered on many aircraft the module, but not aircraft initially provided with FSX. This problem did not exist with Windows XP. Re-install the CD-ROM made no difference, pointing to Windows 7 is the cause. Views of the cockpit are not affected, only the exterior views are all white - no color. Y at - it a patch?
timber71,
Given that this issue is not past with the aircraft that come standard with the game, you must then check with the manufacturer of add-on aircraft for updates\patches. You can watch this site too: http://www.microsoft.com/Products/Games/FSInsider/community/Pages/default.aspx
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
W7 Upgrade Advisor said it would work with the exception of Windows Aero. When the games to try to come with W7 get window 'game running in software rendering... '. Hardware acceleration disabled or not supported by the video card driver"games will not work. A check says last drivers are installed. Tried to reinstall WXP in separeat partition to see if would work like that but will not because most recent W7.
I suggest that you use XP personally gave a computer which is so old.
If you have a computer with XP (3 + years) and have not changed at least two of these things (CPU, RAM, video card), you should probably stick with XP. Not worth the headache of praying that things work with a material more old which probably is no longer supported on the new OS.
Usually, people that the computer was shipped with Vista 1, 2 or less it several years ago can be upgraded to 7 without too much trouble if it was a mid-range machine.In addition, it seems that Windows is not recognizing your graphics card. It looks like (http://www99.shopping.com/xPO-Hewlett-Packard-SR1020NX-CEL2-8-512-80-COM-XPH) you have an Intel Extreme graphics card. However, nothing about it is extreme. Since it is an extreme Intel card I guess Windows Update should find the drivers for you, but it is not then maybe the video card is just too outdated for 7? I'm not sure.
Moreover, I wouldn't worry much about the lack of updates for XP right now. If ever you encounter more money then get the new computer with 7 on it, but at this time I suggest you stay on XP if your hardware and software actually works and that is more important than a few features of 7.
-
Access Manager in blocks of control too well how can I disable?
blocks of too many sites just started this making how to change settings
Hello
1. have you you can all changes on the computer before this problem?
2. what version of internet explore that you use?
Here are the steps to turn off access Manager:
1. open internet explore.
2. click on tools > Internet Options.
3. click on the content tab.
4. click the button disable under Content Advisor.
5. Enter the password for the Access Manager.
For more information on changing the settings, see the articles below.
Internet Explorer Content Advisor: Frequently asked questions
Change Internet Explorer content settings
http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-content-settings
Change content settings Internet Explorer 9
http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-9-content-settings
Maybe you are looking for
-
Is it possible to downgrade the iOS versions?
I recently updated my phone to iOS 10 and I would like to know if I can the downgrade just in case it gets too bug.
-
Satellite L500-1ek - installation system always starts with 800 x 600
I have the Satellite L500-1ek new laptop with Windows 7. Regardless of the screen resolution still set the system starts with 800 x 600. And not only after reboot but even when I logout my profile and connect again.Learn more: I also use external mon
-
I deleated my audio driver by accident, I have no sound for you tube or dvd, tried to find one, but no luck, need a free download for a toshiba windows xp
-
Hi all All of my text appears to have changed IE: Excel, sites web etc. in the example following and is it possible to revert to the standard text? = "but some issues remain to be resolved." Unfortunately, when I post this message the sample text is
-
X 3500 HNAP call to the device failed for an unknown reason.
During the installation process Cisco Connect X 3500 briefly to connect to internet (can surf the net very briefly in this window) but when he arrives at the end of the installation it saying unsuccessful then restarts. Is there a way to manually co