Query regarding VCA and clustered environment

Similar Questions

• Common cause of failure of the Mirage server in clustered environment and how customers will be switched to the other server in a cluster

  Hello

  Can someone share me information about common cause of failure of the Mirage server in clustered environment.

  And how customers will be switched to the other server in a cluster to continue their operations from the server failed.

  Kind regards

  C Bathesha

  In general, Mirage servers are not lacking. It is very rare (and not, for example, to problems of storage or endpoitns, which are more common).

  May raise problems of overload, memory or hardware malfunction too little.

  After that you make server standard troubleshooting (the etc system event log), you must file a Service request by VMware.

• 11 GR 2 Grid Infrastructure manual start/stop in clustered environment

  Hello

  I have installation 11 GR 2 grid in both a stand-alone environment and a cluster environment and I am looking at some differences regarding post-market manually in these two environments

  In the stand-alone environment, manually stop really just composed of-

  ASM - stop I would use generally "srvctl stop asm ' to do

  Stopping HAS (Oracle Restart) - using "crsctl stop at".

  Would be just the reverse of these

  However things in the clustered environment seem to be a whole different kettle of fish!

  First of all I appreciate this start manual switch of ASM and Cluster resource (in stand-alone environments and Clustered) is not really essential for the operation on the day the day (it's really for food issues) and a server startup or stop will do the necessary start / stop services - so somehow this manual process is a bit contrived for the race on the day the day

  Q1. Given that there are so many different levels of process / demons for the clustered environment - is there still a viable manual start for 11 GR 2 GI procedure in a clustered environment?

  Any help in identifying the manual order to start / stop would be appreciated?

  Thank you

  Jim

  Hello

  You can stop/start the cluster and all resources with "crsctl stop/start crs. There is no need to manually stop the asm, it will be managed by clusterware, as well as the dbs, auditors, etc.

  You can use "crsctl stat res t ' for an overview of the resources managed by the crs.

  "crsctl stat res ora.your_dbname.db Pei" gives you detailed information about the resource, including the start and stop option. Regularly, this should be the immediate mode for the dbs, if you're fine with this mode of closure you can simply use crsctl stop crs to stop everything on a single node.

  Concerning

  Thomas

• Query works well in an environment, but not in the other environment

  Hello
  
  I have a question that I am trying to run in two different environments.
  
  Test: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  Prod: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  
  Now the query runs fine in one environment and fails in the other environment.
  It gives following error.
  
  
  ORA-01861: literal does not match the format string
  01861 00000 - "literal does not format string.
  
  The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
  
  The same query works very well on the TEST environment and the PROD environment.
  
  Any help related to it would be appreciated.
  
  Thank you
  Mahesh

  MaheshGx wrote:
  Hello

  I have a question that I am trying to run in two different environments.

  Test: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production
  Prod: - Oracle Database 11 g Release 11.2.0.1.0 - 64 bit Production

  Now the query runs fine in one environment and fails in the other environment.
  It gives following error.

  ORA-01861: literal does not match the format string
  01861 00000 - "literal does not format string.

  The query is too long and contains CHAR-DATE and DATE-CHAR conversions.

  The same query works very well on the TEST environment and the PROD environment.

  Any help related to it would be appreciated.

  Thank you
  Mahesh

  This is called a bug. One caused by the person who developed the code. They relied on an implicit conversion between strings and dates when
  production quality code will always use the function to_char and to_date with a format mask.

• SOA 11 g clustered environment Ant scripts

  Hi all
  
  I just want to know, when deploying a cluster in soa 11 g using Ant, what I need to add the property oc4jinstancename as how we did in soa 10 g for ants?
  
  Can someone explain and maybe example when the deployment of 11g ant of soa to Cluster Configuration of the environment.
  
  Thank you
  K

  Hi K,

  According to my knowledge, you don't need to make additional configurations for this. We have developed scripts of Ant for non-clustered environments both absolutely working on the clustered environment. We referred unique soa_server1 in the deployment scripts. The default rule of consistency of Weblogic replicates the deployment on all nodes in a cluster, where it has been deployed in second instance soa_server2 automatically.

  Try and let me know if you face any issues.

  Rehards,
  Neeraj Sehgal

• weblogicimportmetadata eventhandlers in a clustered environment

  I'm migrating a dev environment of single to a clustered production environment node. In dev, I ran weblogicImportMetadata to import event handlers. In the clustered environment, I need to run weblogicImportMetadata once per node, or once a cluster on each node? Thank you.

  You must import it only once. Cluster or cluster, it points to a single database, and only once. It goes the same for plugins and jar post. As long as you aren't all copy to a physical host, you don't need to repeat the steps on all servers in the cluster.

  -Marie

• A query regarding the creation of shared objects.

  Hello

  I have a query regarding the creation of shared objects.

  I saw an example where the author is creatining Shared Object as shown
  below:

  
  SharedObj = null;
  sharedObj = SharedObject.getLocal ("myTasks");

  and there is nothing related to the word "myTasks" anywhere in the Application.

  Can someone please let me know what this word "myTasks" mean here?

  Thanks in advance.

  Hello

  With a shared object, it will create one if it does not exist, then "myTasks" becomes the name of the shared object or if it exists it will load all the objects that are in the shared object.

  Here is a simple example that uses the sharedobjects to store the connection information.

  http://gumbo.flashhub.NET/login/

  David

• Deploying files proxy services in clustered environment

  Hello
  
  To deploy a file proxy service in a clustered environment, it is necessary to deal specifically in the implementation of the proxy service to ensure that the files can be processed by the managed servers.
  
  If I understand correctly, you can create a distributed queue which is linking to wlsb.internal.transport.task.queue.file and local queues on managed servers can be added as members of the distributed queue.
  
  Currently, the file is getting treated via the server managed, which is the target server poller for the proxy file service. The file is not be treated if the file passes through the other managed server and remains in the repertoire of the scene.
  
  Any help will be appreciated. Please let me know if you count more details.
  
  Thank you

  At SKB: Hard to believe none of the Maury of post was helpful or appropriate. Please, mark to help other readers in the future.

• generated querys SQL are different between DEV and PROD environment

  Hello
  
  I have a problem with the results of the querys in response, I get different results with the same repository, the same query in Answers (catalog), same OS... between DEV environment and PROD environment. The generated SQL querys are also different.
  
  The BI vesion is 10.1.3.4
  
  Any idea on this issue?
  
  Concerning
  
  Guillermo

  You have two queries in dev because you use for a table of two logical source:
  * VEIS_HECHOS_ACUMULADOS
  * and VEIS_HECHOS_GLOBAL

  How OBIEE select this table? This tables are selected if:
  * all of the columns in the answer belongs to the source table
  logical level of each source table is defined with the same parameters for the table two source

  This is the case for you?

• issue with tables and clusters

  Hello

  Another issue with the tables and clusters. I have three engines thatI move on XYZ and then measure something. I need to draw on the 3D, the result of the measurement. How to draw real XYZ and not the index of the data table positions? (I can't actully how to build the matrices 2D forX, Y and Z). In the figures, I give an example of what I need.

  Concerning

  You have to break the data out of the cluster and to present them to the graph 3d to a separate bays for X, Y, Z and W where 'W' is your values measured at the locations described by X, Y, Z.

  This thread shows how trace readings in space 3. The following image shows the data that the original author wanted to draw.

  

  Have fun

  Ben

• Best way to transfer strings, arrays and clusters

  Hi, I just want to know the best way to transfer strings, arrays and clusters between a PC and a computer-RT (compactRIO) if I want to use them in deterministic loops:

  For a string should I use a published network shared variable flow or network?

  For an array of doubles should I flatten the array in a string and the string of transfer? or should I send it as a picture?

  The same for clusters, should I flatten the cluster or the transfer as a cluster?

  Thank you!

  Transfers on the network are not deterministic.  You ask how to use the data in a deterministic way, once it arrives on the RT system.  Usually, you would create a separate loop, not critics of time to deal with network communications.  The data arrives it is copied in real-time-safe structures such as RT-FIFO to put at the disposal of the evanescent loop.

  I can't give you specific advice on network variables and network flows; Finally, I did this kind of transfer over TCP, until these other options were available.

• Task human BPM process not made (in a clustered environment)

  With the help of jDev version 12.2.1.

  I have an application that is deployed in a clustered environment.

  Any ADF the BPM is trying to load the list of tasks BPM got, go back a blank with

  Not found

  The requested URL /workflow/DOO_Simulation_ProjectUI/faces/adf.task-flow was not found.

  
  

  This happens for my human tasks but also for the tasks of duties predefined we can create using BPM Workspace.

  The ADF hwtaskflow points to the HTTP server on the host name when this happens.

  If I change the host name to one of the nodes in the cluster, however, makes the page.

  Does anyone have suggestions on what this might be? The server logs are not information about this error.

  Thank you

  Ok. So I got the answer.

  I had to allow the connections/workflow / * my OHS.

  I also had to add to my web.xml file:

  CLIENT-CERT

  MYREALM

• More than 1 SQL query with checkbox and error invalid number report

  Hi all

  I have two SQL query reports that each has an apex_item.checkbox and two processes for each report.  A report/process works very well.  It gives me an error of invalid number.

  In addition, another query SQL (editable report) gives me the following error when using the Multi line process, delete.

  	ORA-06502: PL/SQL: digital or value error: character number conversion error ORA-06502: PL/SQL: digital or value error: character number conversion error
  Ok

  When I got a report from SQL query (with box and a process) and the query SQL (editable report) everything worked.  It stopped working when I added another SQL query report (with box and a process).

  A SQL query has the following in my query: apex_item.checkbox(3,email_id,'UNCHECKED') ""

  The other SQL query has the following: apex_item.checkbox(2,b.file_id,'UNCHECKED') ""

  Any help will be greatly appreciated,

  Sylvia

  Hi Reema,

  I've recreated the region and now it works!

  Thank you for this, looking at

  Sylvia

• Creating a folder only runs in the hosts and Clusters discovered

  Greetings,

  I am creating folders [as I did through the heavy client] under the computers view virtual and models > Datacenter 'x' and [these are blue records] with VM.

  Yet, when to use the PowerCLi command: Get-Datacenter "x" | New-file - name 'test' [these are yellow]

  
  ONLY, it will create the folder under the view hosts and Clusters $toplevel.

  What command (if possible) would allow me to create folders in the same data center, yet computers VIEW virtual and models. ??

  I can explain it if necessary.

  But you must use the hidden folder called "vm" (as in my code).

  Then your new blue folder will be created directly under the data center.

  The code you have found does exactly the same thing (that vmfolder is actually the "vm" hidden folder I mentioned), but it's a long journey of following pointers

• Management of VMs: Which one to use, "hosts and Clusters" or "models and virtual computers.

  Hi all

  As the subject says, when you manage virtual machines, which is better to use? Hosts and Clusters? Models and virtual computers?

  It's our facility:

  Previously we had only been using "Hosts and Clusters" manage all of our virtual machines. We organize objects of the individual within vApps and Resource Pools. We had also installation on these both parent objects permissions for who has access to what.

  Basically, we have about 12 members. Everyone has their own virtual machines that they use for training, etc. We manage centralized via AD with users and groups user access. We also have some users assigned to some hosts to maintain the level of things between the two hosts. Our license does not DRS, BTW.

  I just replaced our server vCenter in preparation for our 4.1 vSphere upgrade later this year, Yes, we are on vSphere 4.0 currently. So I went ahead and 'computers models and virtual"allowing to create user folders, gave users access and placed virtual machines of all users within these folders. (I heard recently that the use of the hosts and Clusters was semantically incorrect). Even if they have access to their folder, they cannot create a virtual machine because they cannot access a host. A computer file virtual and models can be assigned to a host?

  I didn't assign permissions to each user in order to add to each host, because I didn't want others to mess with other virtual machines. All users previously red access only, but sinc the virtual machines and templates folders are not assigned to any host, they can get in their folder to create and manage their virtual machines.

  Then, I go on this wrong all the models and virtual computers and do I just keep using our hosts and Clusters of installation above permissions groups?

  Any advice on the semantics in this would be appreciated.

  Thank you

  Johnathan

  All,

  I solved my problems.

  Check book Scott Lowes ' Mastering VMware vSphere 4 "Chapter 9, he described the use of Resource Pools to the VM group under the view of the hosts & Clusters. Using the same names as the files under VMs & models and adding the same permissions, I was able to force every user to use their own folder under VMs & templates and only their Resource Pool under hosts & Clusters. So now the two views reflect the objects of each user and their access controls are correct.

  Items to remove this Lessines:

  Use Of Resource Pools under host & Clusters to manage the default host for users.

  Files under VMs & models allows you to manage virtual machines model announcement for each user (simple view).

  Thanks for the help,

  Johnathan