Question about customizing the OAAttrValException

Similar Questions

• Question about customizing the content form of Check-In Info page

  Is it possible to customize this page outside of a component? I know that the page is auto generated and I was wondering if it was possible to use as iDoc stuff on the rules page.

  as long you have defined to include it in a componet and using the right name to "Include personal use", there should not be any problems.
  what you could try is...
  set include "my_custom_include" as follows...
  <@dynamichtml my_custom_include@="">
  <$if not="" isuploadfieldscript$="">
  My custom label
  
  
  <$endif$>
  <@end@>

  Create a check-in and in the content server hcst file containing the following lines of code...
  

  
  <$include my_custom_include$="">
  

  Watch the web rendering of the above check-in and see if the html in your include code is displayed.

  If all good, you can add my_custom_include 'Use Custom include' to your domain in profile rules.

• More questions about custom asynchronous device

  I am trying to create a custom asynchronous device for VeriStand and have the following questions:

  (a) at what rate entered in the course of analysis and data channel pushed into the FIFO of the custom device entry? The scanning speed depends on if the input channel is mapped to a control of workspace object or if it is mapped to an output of the simulation model (.dll file)?

  (b) at what rate the VI real-time asynchronous custome device running? Is it at the same rate as the primary control loop rate? Can I change the rate of implementation of a custom device and how?

  (c) I have a quad-core PXI time real platform. How can I connect the device customized to a specific processor, like what you do with a simulation model (.dll file) in the definition of system file?

  Thank you in advance.

  Data FIFO

  The rate at which data are pumped on your meter is static and has nothing to do with the question of whether the workspace is connected, or if a model is mapped to one of your channels. By default, data are pushed in input of your Custom FIFO each iteration of the loop of primary control. If the FIFO is full, the oldest data packet is crushed. In addition, by default, outings THAT FIFO is controlled ever iteration of the loop of primary control. You can, however, use the NI VeriStand - Set custom decimation of device to mark a property on your customized device that will tell the system its decimation expected in the. If you set a decimation of 10, for example, the primary control loop will be send every 10 iterations of new data and check for new data out FIFO only every 10 iterations. This can help reduce the load of the processor in your system if you do not need updates that often.

  Similarly, you can use the NI VeriStand - Set of deep FIFO to control the depths of the FIFO of your entries and exits FIFO respectively. By default, both have depth 1.

  Delivery rate

  The rate at which your custom device runs depends on how set you up. You can for example, having your Custom asynchronous device uses its own schedule and run at a pace totally independent of the system. Your VI could have regular while loop with a 10ms timer, for example, or it could be based off some hardware device timing.

  Alternatively, you can choose yourself closely synchronize with the primary control loop. This by registering using a property that your Custom device has a timed loop that will use the clock of the device. The unit's clock is a source of synchronization that is checked each iteration of the loop of primary regulation after Custom peripheral FIFO have been updated. You sign up for this simply by calling the NI VeriStand - Set loop property Type specifying Timed loop to loop type and use peripheral clock be true. Then, as the VI model, thread just the clock of the camera in your calendar input source for the timed loop. If you have specified a decimation factor, as mentioned above, you should probably also to use this factor as your dt. This means that if you have a decimation of 10, you only run your timed loop 10 all the graduations of the source of synchronization clock of the device.

  Another simple way to synchronize closely with the primary control with a few problems loop is simply base your timing off the coast of the availability of new data in your entries or exits FIFO. To do this, you can simply use regularly to loop and then just wire - 1 for FIFO wait times. Then your custom device will run as soon as the data are produced and consumed by the system.

  Specification of a processor

  There is no property integrated for the allocation of the processor, but it will be very easy for you to implement yourself. You can specify the processor to run on in the Explorer system by creating a custom using NI VeriStand - property set the property of the element. For example, you could define a property of I32 entitled 'Treatment', with-2 meaning auto-affectation and any non-negative value indicating an index of specific processor. Set this property in one of your device in System Explorer configuration pages and then read the property in VI of pilot in the engine using NI VeriStand - get the property of the element. Then just wire up the value of the property at the entrance of affinity processor on your timed loop. However, you should always check that this processor is on target. Otherwise the timed loop will report an error and abort. It's exactly what we do for models in-house.

• question about cleaning the sensor of the A57

  Dear community of Sony,

  I have several questions about the cleaning of the sensor of the A57.

  Recently, I noticed several dark specs appearing on images when shooting at low opening (F20, F22), especially when there are high for them (like the sky in a landscape photo) contrast. To my knowledge, I've categorized as possible of dust on the sensor. I have read the section of the manual about cleaning the sensor and followed the procedure. However, the problem remained. I have previous experience with cleaning of the more resistant the probe of a Sony NEX dust particles, so I applied it to the A57. I used the specialized sensor cleaning tools combining two parts kit - wet and dry. Noted little dust on translucent mirror as well, so I cleaned up afterwards. Later, I considered this mirror could have some specialized coatings.

  So my first question is: should I have done some permanent damage the mirror or the sensors? Currently, the camera works OK, although some features of dust still remain. It seems that I had pushed some of them to the edges of the sensor.

  I'm not so happy with the tool that I used. I'm thinking about this one for a more thorough cleaning:

  http://www.digitaltoyshop.co.UK/Eyelead_sensor_cleaning_kit_SCK-1_Sony_Alpha_A57_t2836_6789

  It is marketed as a tool for A57. Should I use it?

  Thank you in advance?

  Best regards Angel Marinov

  PS: I'm really happy with my Sony A57 and the NEX. They made me a fan of Sony. So, I want to use this topic to also say thank you to the developers of Sony.

  Hello Angel!

  Read the following steps carefully and let us know if you have any other questions.

• Satellite X 200-219: Question about updating the display driver?

  Sad tales I've heard talk about manufacturers of laptop never updated to gfx card drivers apply to toshiba?

  Any info on the question of whether an update for their SLi systems drivers display is on the horizon?

  see you soon-

  The fact is that display driver cannot be updated daily as for desktop computers. Priority by the manufacturers of cell phones is worrying about the operation of the equipment. Using new graphics card drivers will be forced to run faster and better that offers better graphics performance. The result is essentially an overheating and may end with a faulty graphics card.

  In this case, the card mother together must be exchanged and it costs a lot of money. So, I think that no one can say with certainty when the next pilot will be available.

• Satellite A100-599 - question about updating the display driver

  Hello

  I have a Satellite A100-599 with a NVIDIA 7600go graphics card and I like most of you Bioshock game crashes because of some problems with the graphic card drivers, no pb... Meanwhile, NVIDIA has released some new patches for the Forceware and after I double checked the database of the Toshiba driver support I've seen a new version in the list of display driver for WinXp.

  One of them seems to be 13/09/2007. I have downloaded the drivers, installed them and then I checked the details of the driver in the Device Manager list and to my surprise the details say that the drivers are since 2006. I reinstalled the drivers and the same thing appeared. I checked the XML that was in archive of drivers and surprise... the drivers really are the 'old' of 2006. So my question is this: you have the display drivers for my model that work for Bioshock :D

  Best regards, Marian

  I Don t know if we. I think it would be took a long while to ask every single user: Hey, you have a few drivers for blackmodjo? Ah, come on, please. Some of them... ;)

  No, I have a better idea. It s like to cook a meal. Ingredients: DriverCleaner Pro and the www.laptopvideo2go.com site and... your your your TAAA patience

  To get a good 'bio' meal shocked just follow this recipe:

  Reach
  http://www.laptopvideo2go.com/
  read before doing anything (YES, even before you continue to BREATHE) the FAQ section on this site (RECOMMENDEDRECOMMENDEDRECOMMENDED)
  and then download the drivers. Do it, Yes...

  Then download drivercleaner by searching on www.google.com and THEN read their manual before doing anything else (Ok, you can continue to breathe..)
  After reading the manual you will be something like:

  1. program start, do something, restart the machine
  2. start in safe mode, from this program, deleting... yadayadayada
  3. install the new driver
  3. reading of Bioshock
  4...
  5. No... 6 thank. me and give me your first born... ;)

  So by cutting about 40% of my humorous things and following the constructive technical instructions from me, you will be able to play bioshock.

  Welcomes :)

• Satellite A50 543: Questions about upgrading the HARD drive

  I'm looking to upgrade the internal hard disk on my A50 543 to 100 GB at 7200 RPM. The original drive is a Fujitsu 60GM 4200. I have found no information on the Internet on other readers line CMS that have been tested and found compatible with the A50. I need at least 5400 RPM or 7200 RPM to edit video.

  Suppliers meet usually only with so many laptops on the market, they cannot test each hard drive with any laptop, but can tell if it is compatible with the specifications of the computer and the hard disk specifications and are so confident that their information is accurate that they offer a money back guarantee (excluding shipping costs)

  My question is
  (1) how can I be sure that the drive will work (considering the high international shipping costs) to 100%?

  (2) none of the contributors to this forum may recommend a hard drive internal 5400 RPM or more it has installed on the same model specification?

  Thank you. You are my last hope

  Best regards
  Vince

  Hello

  If you want to be 100% sure that works on your HARD drive, so I think the best way is to contact the after-sales Service of Toshiba partner. Here, you can order all the devices and parts compatible and supported.
  I also found these Toshiba hard disks that must be compatible:
  HDD2187B 20 GB 4 200
  HDD2190B 40 GB 4 200
  HDD2193 40 GB 5 400
  HDD2189B 60 GB 4 200
  HDD2194 60 GB 5 400
  HDD2188B 80 GB 4 200
  80 GB 5 400 HDD2191

  In this case, you can use a disk HARD of GB 5 400 80 but I put t found no information about 100 GB of HARD drive.

• Questions about running the XP on Vista Games

  I've been curious about using older games of XP on Vista and have not been able to find clear answers to this topic with my own research on the internet.  I'm a Fan of First Person Shooter, and they are scarce since Vista came out.  So I would like to add a few shooters of Vista I have with some of the older games, but I have questions to do.

  My questions are:

  1. If I have an old XP game that is listed as not compatible with Vista can still use it if I play it in compatibility mode for XP SP2? (The game's FEAR)
   
  2. This will mess up my system Vista SP1?

  3. If I install 2 or 3 of these old games XP on my Vista SP1 pc and run in XP SP2 compatibility mode microsoft at some point let me no update Vista again?

  4. should I patch older XP games so I don't want?  I just want to play on solo not online.

  (The games are FEAR, DOOM3, QUAKE4 and PREY). Everything for one player only.

  I had these issues since I got Vista.  I couldn't really find that responses indicated clearly by someone I thought I knew what they were talking about so I hope that I can help.

  Thank you
  Jebidia

  Hello Jebidia,

  Thank you for posting.  You have very valid questions and I have some answers.  I currently play FEAR (tested prey in the past) on my Vista Ultimate 64-bit without problems no matter what.  I'd say you do a regular install of the games and they should work fine.  Now if you have some problems, and then reinstall the game in compatibility mode.  As for your other questions, you should have no worries about the game, do not let you Vista update.  Patch games can sometimes resolve known problems that the games themselves are with compatiblities hardware Vista and possible.  You can search for Tweakguides to find a site very useful for players.

  So go and FPS in your heart happy my friend. Zack
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Question about custom stores

  I implement a custom in my app Store... I want to welcome the code on a server to show the information dynamically so that I will not need to update the application whenever I need to make a change...

  The Question is... If I want to show the leaflets that are controlled by a server (using a Login and a password) right on my custom sotre, it is possible to do it with the current custom Adobe API or I can show only folios that could purchases on the Apple Store?  I ask this question because a folio that isn't from Apple Store (say an In - App purchase) shows me a sign of error because I control access to it my system of law.

  I enclose a photo if you can help me with this.

  Thanks for your help

  

  Yes, it is possible. You just hide the folios where State = FolioState.INVALID or FolioState.UNAVAILABLE. After that the person logs in, folio.updatedSignal will be triggered if the State has changed. If the State is > FolioState.UNAVAILABLE then show the folio.

• Question about custom components States

  Hi all.

  I have a question that I can't find an answer to any place.

  I created a screen edition, with two States, "view" and "Edit".  For 'view', the fields are not editable.  If the user presses the button "Edit", all fields become editable, as 'Edit' passes to the State of 'Edit' and all the fields to say "editable.edit = 'true'". "  It works very well.

  My question is a custom component that is contained in this form.  There is also two States, with the same names.  I want to spend the custom also editing mode component.  But I can't seem to do.  If I access the field by "component.state ='edit" "", which generates an error.

  This must be a fairly common thing to do.  I'll use this custom as well as screens component (I hope) so I don't want to lose him if I can avoid it.

  Or maybe that I approach the problem correctly?

  Any help or insight would be appreciated.

  Thank you

  Tom

  You should be able to define the State through the currentState property:

  If your custom component has all the same States as the Application then you may find it useful to link the current component State to the current state of the application:

• Disregard my previous question about downloading the version of Windows on a disc. My friend was able to download itself with dial-up.

  Earlier today, I asked if it would be possible to download the Windows of Thunderbird on a disc using my Mac. My friend just called and said she has downloaded successfully to herself. Sorry for the false alarm.

  all communications on this can be found here:
  https://support.Mozilla.org/en-us/questions/1008956?ESAB=a & s = & r = 0 & s = ACE

• Equium P300-190 - Question about upgrading the processor

  Hello

  I just have a question for my CPU PC Toshiba laptop, I have a can of Equium P300-190 full to give model number if necessary the cpu is one supplied with the laptop.

  My question is I want to upgrade the processor but do not know which would be the best option and there are limits with the BIOS, etc. on board.

  Any help would be greatly appreciated.

  Probably it is not known to you that upgrading the CPU is not officially supported by the manufacturers of portable.

  The CPU upgrade is a tricky thing... the fact is that the CPU must be supported by chipset and BIOS.
  Where a party would not support the new processor, the unit will not light.

  So even if you use a CPU that is supported by the chipset (Intel GM965) there is a risk that the BIOS could not support the new processor...

  The laptop was equipped with processor Intel Pentium Dual-Core processor T2390 (Merom code name) probably the other CPU Intel Pentium Dual-Core family-owned would be compatible, but to be honest, you won't see a performance improvement...

  So in my opinion it is not worth trying to upgrade the processor...

  In my opinion, you need to replace the HARD drive with an SSD... in that case you will get the performance improvement...

• Question about updating the driver for the graphics card Intel HD on satellite C series

  This keeps coming up when I use the 2.5 Update utility driver Intel (r)

  "A custom computer manufacturer driver is installed on your computer.
  The Intel Driver Update utility is not able to update the driver. Install a generic Intel driver
  instead of the custom computer manufacturer driver may cause technical problems.
  Contact your computer manufacturer for the latest driver for your computer.

  Should I change "Driver from the computer manufacturer custom" for the generic last by (a "driver Intel) - https://downloadcenter.intel.com/

  I'm looking for the option that gives the best fps

  Intel HD Graphics Info:
  http://prntscr.com/b6ujgb
  System information:
  http://prntscr.com/b6ukbs

  I have to install the driver manually, with exe it will not work.

  http://www.Intel.com/content/www/us/...000005629.html

  1. Download the graphics driver ZIP file. Unzip the file to a designated location or folder.
  2. Open the Device Manager:
  3. For Windows 8 and 8.1 Windows: press the Windows and X keys simultaneously.
  4. For Windows 10: Right mouse click on the Windows Start icon
  5. Click Yes when you are prompted for permission to the user account control.
  6. Expand the display of the maps section.
  7. Right click on the entry of Intel® graphics and select Update driver software.
  8. Click Browse my computer for driver software.
  9. Click Browse and select the directory where the driver files.
  10. Click Next. Drivers are being installed.
  11. Restart the computer when you are prompted.

• Satellite U series: Question about bypassing the battery when connected on AC

  Hi, I am a bit newbie to PC Toshiba laptop (series U) and I was wondering if my laptop has this feature where it bypasses the battery when it is fully charged and the power supply cable is connected?
  I see the battery blue led is on even when it is fully charged and the power is connected, it means that my computer is still using the battery?

  I'm running a lot and I will not waste my battery life.
  Thanks for any comments.

  Hello

  Congratulations on your new machine, I understand that worried you´re for your battery life. I was scared too, but a lot of people here in the forum told me that, in each new machine for many years (i.e. about 6 to 9 years) almost every laptop has an electronic charge that regulates the process of charge of the battery.

  Don t worry, if your battery is fully charged, the built-in charging circuit is a special State that is as "cool cool" to maintain your battery and to protect the battery.
  S better to keep the battery in the machine then removing it.

  Welcome them

• Question about updating the BIOS for Qosmio G20

  I downloaded the updated the BIOS of my pc, not the Qosmio, the instructions say it will unpack into 3 files, one being a floppy disk installation. When I unzip on my desktop pc, it makes a file that s too big for a floppy and he won t unzip further because it locks up my pc.

  Is it safe to make it work on my desktop pc it can unzip then in the three files and this will affect my BIOS or y at - it somewhere that I can download the floppy part on its own to load on a floppy?

  Hello

  Just a question;
  You have downloaded the Qosmio G20 BIOS on the desktop computer, unpacked and now you want it please on the diskette in the floppy drive.
  Is this good?

  So now my suggestion;
  Firstly that the Qosmio G20 BIOS and other BIOS Toshiba cannot be updated using the floppy! This isn't traditional BIOS!
  The BIOS from the Toshiba page must be updated when the Windows operating system is running!

  By the way: you can unpack the BIOS on your desktop computer, but don t try to run all files, because the bad BIOS can damage the motherboard ROM module!